Electroanalysis of Biomolecules: Rational Selection of Sensor Construction.

Methods of electrochemical analysis of biological objects based on the reaction of electro-oxidation/electro-reduction of molecules are presented. Polymer nanocomposite materials that modify electrodes to increase sensitivity of electrochemical events on the surface of electrodes are described. Examples of applications electrochemical biosensors constructed with nanocomposite material for detection of biological molecules are presented, advantages and drawbacks of different applications are discussed.

Easy-Preparable Butyrylcholinesterase/Microgel Construct for Facilitated Organophosphate Biosensing.

A versatile guest matrix was fabricated from a temperature- and pH-sensitive poly(N-isopropylacrylamide)-co-(3-(N,N-dimethylamino)propylmethacrylamide) microgel (poly(NIPAM-co-DMAPMA), MG) for the gentle incorporation of butyrylcholinesterase (BChE). The microgel/BChE films were built up on a surface of graphite-based screen-printed electrodes (SPEs) premodified with MnO2 nanoparticles via a two-step sequential adsorption under careful temperature and pH control. On this basis, a rather simple amperometric biosensor construct was formed, which uses butyrylthiocholine as BChE substrate with subsequent MnO2-mediated thiocholine oxidation at a graphite-based SPE. The complexation of BChE with the microgel was found to be safe and effective, as confirmed by a high operational and rather good long-term storage stability of the resultant SPE-MnO2/MG/BChE biosensors. The small mesh size of the microgel with respect to the size of BChE results in a predominant outer complexation of BChE within the dangling chains of the microgel rather than a deep penetration of the enzyme into the microgels. Given such surface localization, BChE is easily accessible both for the substrate and for cholinesterase inhibitors. This was supported by the analytical characteristics of the SPE-MnO2/MG/BChE biosensor that were examined and optimized both for the substrate and for the enzyme detection. The SPE-MnO2/MG/BChE biosensor enabled precision detection of organophosphorus pesticides (diazinon(oxon), chlorpyrifos(oxon)) in aqueous samples with minimized interference from extraneous (nonanalyte) substances (e.g., ions of heavy metals). The detection limits for diazinon(oxon) and chlorpyrifos(oxon) were estimated to be as low as 6 × 10-12 M and 8 × 10-12 M, respectively, after 20 min of preincubation with these irreversible inhibitors of BChE.

Compaction and Transmembrane Delivery of pDNA: Differences between l-PEI and Two Types of Amphiphilic Block Copolymers.

Polycations are popular agents for nonviral delivery of DNA to mammalian cells. Adding hydrophobic, biodegradable, or cell-penetrating functions could help to improve their performance, which at present is below that of viral agents. A crucial first step in gene delivery is the complexation of the DNA. The characteristics of these "polyplexes" presumably influence or even determine the subsequent steps of membrane passage, intracellular traveling/DNA release, and nuclear uptake. Herein, polyplexes formed with linear poly(ethylenimine) (l-PEI) are compared to complexes generated with functionalized diblock copolymers. While l-PEI interacts only electrostatically with the DNA, interaction in the case of the diblock polymers may be mixed-mode. In certain cases, transfection efficiency improved when the polyplexes were formed in hypertonic solution. Moreover, whereas conventional PEI-based polyplexes enter the cells via endocytosis, at least one of the diblock agents seemed to promote entry via transient destabilization of the plasma membrane.

Temperature-induced structure switch in thermo-responsive micellar interpolyelectrolyte complexes: toward core-shell-corona and worm-like morphologies.

The spontaneous formation and thermo-responsiveness of a colloidally-stable interpolyelectrolyte complex (IPEC) based on a linear temperature-sensitive diblock copolymer poly(vinyl sulfonate)31-b-poly(N-isopropyl acrylamide)27 (PVS31-b-PNIPAM27) and a star-shaped quaternized miktoarm polymer poly(ethylene oxide)114-(poly(2-(dimethylamino)ethyl methacrylate)17)4 (PEO114-(qPDMAEMA17)4) was investigated in aqueous media at 0.3 M NaCl by means of dynamic light scattering (DLS), small angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM). The micellar macromolecular co-assemblies show a temperature-dependent size and morphology, which result from the lower critical solution temperature (LCST) behavior of the PNIPAM-blocks. Hence, the micellar co-assemblies grow upon heating. At 60 °C, spherical core-shell-corona co-assemblies are proposed with a hydrophobic PNIPAM core, a water-insoluble IPEC shell, and a hydrophilic PEO corona. These constructs develop into a rod-like structure upon extended equilibration. In turn, PEO-arms and PNIPAM-blocks within a hydrophilic mixed two-component corona surround the water-insoluble IPEC domain at 20 °C, thereby forming spherical core-corona co-assemblies. Reversibility of the structural changes is suggested by the scattering data. This contribution addresses the use of a combination of oppositely charged thermo-responsive and bis-hydrophilic star-shaped polymeric components toward IPECs of diverse morphological types.

The Influence of the Chain Length of Polycations on their Complexation with Anionic Liposomes.

A series of strong polycations is synthesized through the anionic polymerization of 2-vinylpyridine, followed by subsequent quaternization of the resulting polymer. Polycations based on quaternized 2-vinylpyridine (PVPQs) with degrees of polymerization (DP) from 20 to 440 are adsorbed on the surface of small anionic liposomes. Liposome/PVPQ complexes are characterized by using a number of physicochemical methods. All PVPQs are totally adsorbed onto the liposome surface up to a certain concentration at which saturation is reached (which is specific for each PVPQ). The integrity of the adsorbed liposomes remains intact. Short PVPQs interact with anionic lipids localized on the outer membrane leaflet, whereas long PVPQs extract anionic lipids from the inner to outer leaflet. Complexes tend to aggregate, and the largest aggregates are formed when the initial charge of the liposomes is fully neutralized by the charge of the PVPQ. PVPQs with intermediate DPs demonstrate behavioral features of both short and long PVPQs. These results are important for the interpretation of the biological effects of cationic polymers and the selection of cationic polymers for biomedical applications.

Engineering Systems with Spatially Separated Enzymes via Dual-Stimuli-Sensitive Properties of Microgels.

This work examines the adsorption regime and the properties of microgel/enzyme thin films deposited onto conductive graphite-based substrates. The films were formed via two-step sequential adsorption. A temperature- and pH-sensitive poly(N-isopropylacrylamide)-co-(3-(N,N-dimethylamino)propylmethacrylamide) microgel (poly(NIPAM-co-DMAPMA microgel) was adsorbed first, followed by its interaction with the enzymes, choline oxidase (ChO), butyrylcholinesterase (BChE), or mixtures thereof. By temperature-induced stimulating both (i) poly(NIPAM-co-DMAPMA) microgel adsorption at T > VPTT followed by short washing and drying and then (ii) enzyme loading at T < VPTT, we can effectively control the amount of the microgel adsorbed on a hydrophobic interface as well as the amount and the spatial localization of the enzyme interacted with the microgel film. Depending on the biomolecule size, enzyme molecules can (in the case for ChO) or cannot (in the case for BChE) penetrate into the microgel interior and be localized inside/outside the microgel particles. Different spatial localization, however, does not affect the specific enzymatic responses of ChO or BChE and does not prevent cascade enzymatic reaction involving both BChE and ChO as well. This was shown by the methods of electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and amperometric analysis of enzymatic responses of immobilized enzymes. Thus, a novel simple and fast strategy for physical entrapment of biomolecules by the polymeric matrix was proposed, which can be used for engineering systems with spatially separated enzymes of different types.

Efficient size control of copper nanoparticles generated in irradiated aqueous solutions of star-shaped polyelectrolyte containers.

The formation of copper nanoparticles (Cu-NPs) in irradiated aqueous solutions of star-shaped poly(acrylic acid) (PAA) were studied at two pH values. Transmission electron microscopy (TEM) demonstrates that the star-shaped macromolecules loaded with Cu(2+) ions can act as individual nanosized containers providing a perfect control over the size and size distribution of Cu-NPs. Electron paramagnetic resonance (EPR) and optical spectroscopy show a transformation of mechanisms controlling the reduction of Cu(2+) ions and the further formation of Cu-NPs. At pH 2.9, Cu-NPs are formed from the aquacomplexes of Cu(2+) ions through homogeneous nucleation. At pH 4.3, the formation of Cu-NPs occurs inside macromolecular containers loaded with Cu(2+) ions, which are bound to carboxylic groups of the polyelectrolyte. In the latter case, Cu-NPs apparently ripen from preformed hydrated Cu2O seeds, which are thought to result from the ultrasmall (Cu(2+))m(OH(-))k(COO(-))n species, thus implying a heterogeneous nucleation.

Dual-stimuli-sensitive microgels as a tool for stimulated spongelike adsorption of biomaterials for biosensor applications.

This work examines the fabrication regime and the properties of microgel and microgel/enzyme thin films adsorbed onto conductive substrates (graphite or gold). The films were formed via two sequential steps: the adsorption of a temperature- and pH-sensitive microgel synthesized by precipitation copolymerization of N-isopropylacrylamide (NIPAM) and 3-(N,N-dimethylamino)propylmethacrylamide (DMAPMA) (poly(NIPAM-co-DMAPMA) at the pH-condition corresponding to its noncharged state (first step of adsorption), followed by the enzyme, tyrosinase, adsorption at the pH-condition when the microgel and the enzyme are oppositely charged (second step of adsorption). The stimuli-sensitive properties of poly(NIPAM-co-DMAPMA) microgel were characterized by potentiometric titration and dynamic light scattering (DLS) in solution as well as by atomic force microscopy (AFM) and quartz crystal microbalance with dissipation monitoring (QCM-D) at solid interface. Enhanced deposition of poly(NIPAM-co-DMAPMA) microgel particles was shown at elevated temperatures exceeding the volume phase transition temperature (VPTT). The subsequent electrostatic interaction of the poly(NIPAM-co-DMAPMA) microgel matrix with tyrosinase was examined at different adsorption regimes. A considerable increase in the amount of the adsorbed enzyme was detected when the microgel film is first brought into a collapsed state but then was allowed to interact with the enzyme at T < VPTT. Spongelike approach to enzyme adsorption was applied for modification of screen-printed graphite electrodes by poly(NIPAM-co-DMAPMA)/tyrosinase films and the resultant biosensors for phenol were tested amperometrically. By temperature-induced stimulating both (i) poly(NIPAM-co-DMAPMA) microgel adsorption at T > VPTT and (ii) following spongelike tyrosinase loading at T < VPTT, we can achieve more than 3.5-fold increase in biosensor sensitivity for phenol assay. Thus, a very simple, novel, and fast strategy for physical entrapment of biomolecules by the polymeric matrix was proposed and tested. Being based on this unique stimuli-sensitive behavior of the microgel, this stimulated spongelike adsorption provides polymer films comprising concentrated biomaterial.

Spontaneous assembly of miktoarm stars into vesicular interpolyelectrolyte complexes.

Mixing a bis-hydrophilic, cationic miktoarm star polymer with a linear polyanion leads to the formation of unilamellar polymersomes, which consist of an interpolyelectrolyte complex (IPEC) wall sandwiched between poly(ethylene oxide) brushes. The experimental finding of this rare IPEC morphology is rationalized theoretically: the star architecture forces the assembly into a vesicular shape due to the high entropic penalty for stretching of the insoluble arms in non-planar morphologies. The transmission electron microscopy of vitrified samples (cryogenic TEM) is compared with the samples at ambient conditions (in situ TEM), giving one of the first TEM reports on soft matter in its pristine environment.

Micellar interpolyelectrolyte complexes.

Interpolyelectrolyte complexes (IPECs) are typically formed when two polyelectrolytes of opposite charge are mixed together in solution. We present an overview of different strategies for the preparation of micellar IPECs, i.e., structures where such IPEC domains form the core or the shell of micelles. In addition, vesicular architectures are considered, where the IPEC domain forms a membrane layer. One intriguing feature of IPECs is that their formation can be directed, their stability towards changes in pH or ionic strength can (to a certain extent) be predicted, and their size can be controlled. Especially the use of ionic/non-ionic block copolymers offers unique potential for the preparation of well-defined and sophisticated nanostructured materials. We also discuss possible applications, especially in the field of life sciences, including biocompatibility, the controlled uptake/release of guest substances, the immobilization of enzymes, or the controlled formation of inorganic/organic hybrid materials.

Adsorption of Preformed Microgel-Enzyme Complexes as a Novel Strategy toward Engineering Microgel-Based Enzymatic Biosensors.

A novel approach to surface modification, which consists of the adsorption of microgel-enzyme complexes preformed in solution, is highlighted. Accordingly, the microgel-enzyme complexes were formed due to the electrostatic interaction of the oppositely charged interacting components, that is, a cationic poly(N-isopropylacrylamide)-based microgel and glucose oxidase taken as a model enzyme. The spontaneous adsorption of the prepared microgel-enzyme complexes, examined by means of quartz crystal microbalance with dissipation monitoring and atomic force microscopy, was observed, resulting in the formation of well-adhered microgel-enzyme coatings. Further, the preformed microgel-enzyme complexes were adsorbed onto the modified graphite-based screen-printed electrodes, and their enzymatic responses were determined by means of amperometry, demonstrating a remarkable analytical performance toward the quantification of ß-D-glucose in terms of high sensitivity (0.0162 A × M-1 × cm-2), a low limit of detection (1 µM), and an expanded linear range (1-2000 µM). The fabricated microgel-enzyme biosensor constructs were found to be very stable against manifold-repeated measurements. Finally, the pH- or salt-induced release of glucose oxidase from the adsorbed preformed microgel-enzyme complexes was demonstrated. The findings obtained for the microgel-enzyme coatings prepared via adsorption of the preformed microgel-enzyme complexes were compared to those found for the microgel-enzyme coatings fabricated via a previously exploited two-stage sequential adsorption, which includes the adsorption of the microgel first, followed by the electrostatic binding of glucose oxidase by the adsorbed microgel.

Electrochemical characterization of mutant forms of rubredoxin B from Mycobacterium tuberculosis.

Electron transfer in metalloproteins is a driving force for many biological processes and widely distributed in nature. Rubredoxin B (RubB) from Mycobacterium tuberculosis is a first example among [1Fe-0S] proteins that support catalytic activity of terminal sterol-monooxygenases enabling its application in metabolic engineering. To explore the tolerance of RubB to the specific amino acid changes we evaluated the effect of surface mutations on its electrochemical properties. Based on the RubB fold we also designed the mutant with a putative additional site for protein-protein interactions to further evaluate electron transfer and electrochemical properties. The investigation of redox properties of mutant variants of RubB was done using screen-printed graphite electrodes (SPEs) modified with stable dispersion of multi-walled carbon nanotubes (MWCNTs). The redox potentials (midpoint potentials, E0Ꞌ) of mutants did not significantly differ from the wild type protein and vary in the range of -264 to -231 mV vs. Ag/AgCl electrode. However, all mutations affect electron transfer rate between the protein and electrode. Notably, the modulation of the protein-protein interactions was observed for the insertion mutant suggesting the possibility of tailoring of rubredoxin for the selected redox-partner. Overall, RubB is tolerant to the significant modifications in its structure enabling rational engineering of novel redox proteins.

In Situ SERS Sensing by a Laser-Induced Aggregation of Silver Nanoparticles Templated on a Thermoresponsive Polymer.

A stimuli-responsive (pH- and thermoresponsive) micelle-forming diblock copolymer, poly(1,2-butadiene)290-block-poly(N,N-dimethylaminoethyl methacrylate)240 (PB-b-PDMAEMA), was used as a polymer template for the in situ synthesis of silver nanoparticles (AgNPs) through Ag+ complexation with PDMAEMA blocks, followed by the reduction of the bound Ag+ with sodium borohydride. A successful synthesis of the AgNPs on a PB-b-PDMAEMA micellar template was confirmed by means of UV-Vis spectroscopy and transmission electron microscopy, wherein the shape and size of the AgNPs were determined. A phase transition of the polymer matrix in the AgNPs/PB-b-PDMAEMA metallopolymer hybrids, which results from a collapse and aggregation of PDMAEMA blocks, was manifested by changes in the transmittance of their aqueous solutions as a function of temperature. A SERS reporting probe, 4-mercaptophenylboronic acid (4-MPBA), was used to demonstrate a laser-induced enhancement of the SERS signal observed under constant laser irradiation. The local heating of the AgNPs/PB-b-PDMAEMA sample in the laser spot is thought to be responsible for the triggered SERS effect, which is caused by the approaching of AgNPs and the generation of "hot spots" under a thermo-induced collapse and the aggregation of the PDMAEMA blocks of the polymer matrix. The triggered SERS effect depends on the time of a laser exposure and on the concentration of 4-MPBA. Possible mechanisms of the laser-induced heating for the AgNPs/PB-b-PDMAEMA metallopolymer hybrids are discussed.

DNA melting temperature assay for assessing the stability of DNA polyplexes intended for nonviral gene delivery.

Many synthetic polycations have the ability to form complexes with the polyanion DNA, yet only a few, most notably poly(ethylene imine) (PEI), are efficient gene-delivery vehicles. Although a common explanation of this observation relies on the buffering capacity of the polycation, the intracellular stability of the complex may also play a role and should not be neglected. Assays typically used to follow complex formation, however, often do not provide the required information on stability. In this article, we propose the change in the DNA melting temperature observable after complex formation to be a significant indicator of complex stability. For a given DNA/polycation ratio, changes in the melting temperature are shown to depend on the polycation chemistry but not on the DNA topology or the polycation architecture. Effects of changes in the DNA/polycation ratio as well as the effect of polycation quaternization can be interpreted using the melting temperature assay. Finally, the assay was used to follow the displacement of DNA from the complexes by poly(methacrylic acid) or short single-stranded DNA sequences as competing polyanions.

Electrochemical studies of the interaction of rifampicin and nanosome/rifampicin with dsDNA.

The interactions of dsDNA with rifampicin (RF) or with rifampicin after encapsulation in phospholipid micelles (nanosome/rifampicin) (NRF) were studied electrochemically. Screen-printed electrodes (SPEs) modified by stable dispersions of multi-wolled carbon nanotubes (MWCNTs) in aqueous solution of poly(1,2-butadiene)-block-poly(2-(dimethylamino)ethyl methacrylate) (PB290-b-PDMAEMA240) diblock copolymer were used for quantitative electrochemical investigation of direct electrochemical oxidation of guanine at E = 0.591 V (vs. Ag/AgCl) and adenine at E = 0.874 V (vs. Ag/AgCl) of dsDNA and its change in the presence of RF or NRF. Due to RF or NRF interaction with dsDNA, the differential pulse voltammetry (DPV) peak currents of guanine and adenine decreased and the peak potentials shifted to more positive values with increasing drug concentration (RF or NRF). Binding constants (Kb) of complexes RF-dsDNA and NRF-dsDNA were calculated based on adenine and guanine oxidation signals. The Kb values for RF-dsDNA were 1.48 × 104 M-1/8.56 × 104 M-1, while for NRF-dsDNA were 2.51 × 104 M-1/1.78 × 103 M-1 (based on adenine or guanine oxidation signals, respectively). The values of Kb revealed intercalation mode of interaction with dsDNA for RF and mixed type of interaction (intercalation and electrostatic mode) for NRF. The estimated values of ΔG (Gibbs free energy) of the complex formation confirmed that drug-dsDNA interactions are spontaneous and favourable reactions.

Interpolyelectrolyte complexation in chloroform.

Interpolyelectrolyte complexes (IPECs) were formed in chloroform from complementary polyelectrolyte-surfactant complexes (PESCs), i.e., linear polyelectrolytes whose counterions were substituted by surfactants to dissolve them in the low-polarity organic solvent. The interaction between such complementary PESCs was followed by turbidimetry, (1)H NMR, and dynamic light scattering. The experimental results, together with those from transmission electron microscopy and scanning force microscopy, provide evidence on the formation IPECs in the system. This process is apparently driven by the entropically favorable release of the pairs of the oppositely charged surfactant ions. If the mixing base-molar ratio between the complementary PESCs, Z, is below a certain threshold value, their chloroform mixtures are colloidally stable, containing relatively large aggregates. These aggregates are attributed to particles of the formed IPECs stabilized by the fragments of the excess polymeric component. Otherwise, the mixtures of the PESCs undergo phase separation (most pronounced at Z = 1) with the formation of an insoluble top phase (attributed to insoluble IPEC) and a clear bottom phase enriched with the surfactant counterions. Electron and scanning force micrographs indicate a rather broad size distribution of the soluble macromolecular coassemblies with a close to spherical shape.

Rational Design of Amphiphilic Diblock Copolymer/MWCNT Surface Modifiers and Their Application for Direct Electrochemical Sensing of DNA.

We demonstrate the application of amphiphilic ionic poly(n-butylmethacrylate)-block- poly(2-(dimethylamino)ethyl methacrylate) diblock copolymers (PnBMA40-b-PDMAEMA40, PnBMA40-b-PDMAEMA120, PnBMA70-b-PDMAEMA120) for dispersing multiwalled carbon nanotubes (MWCNTs) in aqueous media, a subsequent efficient surface modification of screen-printed electrodes (SPEs), and the application of the modified SPEs for DNA electrochemistry. Stable and fine aqueous dispersions of MWCNTs were obtained with PnBMAx-b-PDMAEMAy diblock copolymers, regardless of the structure of the copolymer and the amount of MWCNTs in the dispersions. The effect of the diblock copolymer structure was important when the dispersions of MWCNTs were deposited as modifying layers on surfaces of SPEs, resulting in considerable increases of the electroactive surface areas and great acceleration of the electron transfer rate. The SPE/(PnBMAx-b-PDMAEMAy + MWCNT) constructs were further exploited for direct electrochemical oxidation of the guanine (G) and adenine (A) residues in a model salmon sperm double-stranded DNA (dsDNA). Two well-defined irreversible oxidation peaks were observed at about +600 and +900 mV, corresponding to the electrochemical oxidation of G and A residues, respectively. A multi-parametric optimization of dsDNA electrochemistry enables one to get the limits of detection (LOD) as low as 5 µg/mL (0.25 µM) and 1 µg/mL (0.05 µM) for G and A residues, respectively. The achieved sensitivity of DNA assay enables quantification of the A and G residues of dsDNA in the presence of human serum and DNA in isolated human leukocytes.

Self-Templated Generation of Triggerable and Restorable Nonequilibrium Micelles.

Conditional variations can lead to micellar transformations resulting in various (equilibrium) morphologies. However, creating differently shaped assemblies under the same final conditions (same ingredients, composition, temperature, etc.) is challenging. We present a thermoresponsive polyelectrolyte system allowing a pathway-dependent preparation of kinetically stable spherical star-like or cylindrical micelles. In more detail, a temperature-induced structure switch is used to generate equilibrated interpolyelectrolyte complex (IPEC) micelles of different morphologies (templates) below and above the lower critical solution temperature in the presence of plasticizer (salt). Then, lowering the salt concentration at a specific temperature kinetically freezes the formed IPECs, keeping the respective microstructural information encoded in the frozen IPEC also at other temperatures. Hence, different nonequilibrium morphologies at the same final conditions are provided. The salt-triggered transition from nonequilibrium to equilibrium micelles can be repeated for the same sample, highlighting a system with an on-demand changeable and restorable structure.

Surface Functionalization by Stimuli-Sensitive Microgels for Effective Enzyme Uptake and Rational Design of Biosensor Setups.

We highlight microgel/enzyme thin films that were deposited onto solid interfaces via two sequential steps, the adsorption of temperature- and pH-sensitive microgels, followed by their complexation with the enzyme choline oxidase, ChO. Two kinds of functional (ionic) microgels were compared in this work in regard to their adsorptive behavior and interaction with ChO, that is, poly(N-isopropylacrylamide-co-N-(3-aminopropyl)methacrylamide), P(NIPAM-co-APMA), bearing primary amino groups, and poly(N-isopropylacrylamide-co-N-[3-(dimethylamino) propyl]methacrylamide), P(NIPAM-co-DMAPMA), bearing tertiary amino groups. The stimuli-sensitive properties of the microgels in the solution were characterized by potentiometric titration, dynamic light scattering (DLS), and laser microelectrophoresis. The peculiarities of the adsorptive behavior of both the microgels and the specific character of their interaction with ChO were revealed by a combination of surface characterization techniques. The surface charge was characterized by electrokinetic analysis (EKA) for the initial graphite surface and the same one after the subsequent deposition of the microgels and the enzyme under different adsorption regimes. The masses of wet microgel and microgel/enzyme films were determined by quartz crystal microbalance with dissipation monitoring (QCM-D) upon the subsequent deposition of the components under the same adsorption conditions, on a surface of gold-coated quartz crystals. Finally, the enzymatic responses of the microgel/enzyme films deposited on graphite electrodes to choline were tested amperometrically. The presence of functional primary amino groups in the P(NIPAM-co-APMA) microgel enables a covalent enzyme-to-microgel coupling via glutar aldehyde cross-linking, thereby resulting in a considerable improvement of the biosensor operational stability.

Thermoresponsive Segments Retard the Formation of Equilibrium Micellar Interpolyelectrolyte Complexes by Detouring to Various Intermediate Structures.

The kinetics of interpolyelectrolyte complexation involving architecturally complex (star-like) polymeric components is addressed. Specifically, the spontaneous coupling of branched cationic star-shaped miktoarm polymers, i.e., quaternized poly(ethylene oxide)114-(poly(2-(dimethylamino)ethyl methacrylate)17)4 (PEO114-(qPDMAEMA17)4), and temperature-sensitive linear anionic diblock copolymers poly(vinyl sulfonate)31-b-poly(N-isopropylacrylamide)27 (PVS31-b-PNIPAM27) and further rearrangements of the formed complexes were investigated by means of stopped-flow small-angle X-ray scattering (SAXS). Colloidally stable micelles were obtained upon mixing both polymers at a 1:1 charge molar ratio in saline solutions. The description of the time-resolved SAXS data with appropriate form factor models yielded dimensions for each micellar domain and detailed the picture of the time-dependent size changes and restructuring processes. A fast interpolyelectrolyte coupling and structural equilibration were observed when mixing occurs below the lower critical solution temperature (LCST) of PNIPAM, resulting in small spherical-like assemblies with hydrated PNIPAM coronal blocks. Above the LCST, the collapsed PNIPAM decelerates equilibration, though temperature as such is expected to boost the kinetics of complex formation: after a fast initial interpolyelectrolyte coupling, different nonequilibrium structures of spherical and worm-like shape are observed on different time scales. This study illustrates how a thermoresponsive component can modulate the influence of temperature on kinetics, particularly for rearrangement processes toward equilibrium structures during interpolyelectrolyte complexation.