Aerated Static Pile Composting for Industrial Biowastes: From Engineering to Microbiology.

This work demonstrated the feasibility of an industrial-scale aerated static pile composting system for treating one of the common biowastes-soybean curd residue. The mixing ratios of the feedstock were optimized to achieve a carbon-nitrogen ratio and a moisture level in the ranges of 25-35 and 60-70%, respectively. This open-air composting system required 6-7 months to obtain a mature compost. Solvita and seed germination tests further confirmed the maturity of the compost, with 25% compost extract concentration yielding the best germination index in the absence of phytotoxicity. The bacterial and fungal compositions of the compost piles were further examined with metagenomic analysis. Thermoactinomyces spp., Oceanobacillus spp., and Kroppenstedtia spp. were among the unique bacteria found, and Diutina rugosa, Thermomyces dupontii, and Candida taylorii were among the unique fungi found in the compost piles, suggesting the presence of good microorganisms for degrading the organic biowastes.

Crystallinity and lattice vacancies of different mesoporous g-C3N4 for photodegradation of tetracycline and its cytotoxic implication.

Tetracycline (TC) antibiotic removal from water bodies is important to provide clean water and sanitation. Mesoporous graphitic carbon nitride (GCN) photocatalyst derived from three different types of precursors manages to remove TC effectively under visible light irradiation. Among urea, thiourea, and melamine precursors, melamine-prepared GCN (MGCN) via thermal polymerization has the highest efficiency to photodegrade tetracycline (TC) antibiotics up to 99.5% (0.0122 min-1) within 240 min. The COD for TC removal by using MGCN was up to 77.5% after 240 min of degradation. This is due to the slow charge recombination and rapid charge carrier migration. The MGCN encounters different properties such as high crystallinity, dense structure allowing fast charges migration, and nitrogen vacancies that create a defect state that suppresses charge recombination. It was found that the conduction band (CB) of MGCN was located at a more negative position (ECB = -0.33 V) than (O2/O2•-) and the valence band (VB) was placed at a more positive position (EVB = 2.30 V) than (H2O/OH•), which allows generation of both radicals for photodegradation. Based on the cell viability test, the photodegraded TC in the water how non-toxicity toward Balb/c 3T3 cells after being irradiated (λ > 420 nm) for 240 min under visible light. The MGCN prepared in this study demonstrated the highest effectiveness and recyclable photocatalyst for the removal of TC among all GCNs.

Highly Mesoporous g-C3N4 with Uniform Pore Size Distribution via the Template-Free Method to Enhanced Solar-Driven Tetracycline Degradation.

A highly mesoporous graphitic carbon nitride g-C3N4 (GCN) has been produced by a template-free method and effectively photodegrade tetracycline (TC) antibiotic under solar light irradiation. The mesoporous GCN (GCN-500) greatly improves the photoactivity (0.0247 min-1) by 2.13 times, as compared to that of bulk GCN (0.0116 min-1). The efficiently strengthened photoactivity is ascribed to the high porosity (117.05 m2/g), and improves the optical absorption under visible light (Eg = 2.65 eV) and good charge carrier separation efficiency. The synthesized mesoporous GCN shows a uniform pore size (~3 nm) distribution. GCN-500 shows large pore volume (0.210 cm3/g) compared to GCN-B (0.083 cm3/g). Besides, the GCN-500 also exhibits good recyclability and photostability for TC photodegradation. In conclusion, GCN-500 is a recyclable photocatalyst for the removal of TC under visible light irradiation.

Correction: A review of the recent progress on heterogeneous catalysts for Knoevenagel condensation.

Correction for 'A review of the recent progress on heterogeneous catalysts for Knoevenagel condensation' by Jimmy Nelson Appaturi et al., Dalton Trans., 2021, 50, 4445-4469, DOI: 10.1039/d1dt00456e.

A review of the recent progress on heterogeneous catalysts for Knoevenagel condensation.

One of the most crucial attributes of synthetic organic chemistry is to design organic reactions under the facets of green chemistry for the sustainable production of chemicals. Thus, due to the intensified environmental and safety concern, the need for new technologies for conducting chemical transformation has grown. In this regard, there is enormous interest in the use of heterogeneous catalysts as they generally avoid the generation of waste, require fewer toxic reagents, as well as entail easier separation and recycling of the catalyst. α,ß-Unsaturated acids have been widely used in various industrial applications and have been identified as one of the most promising chemicals obtained via the Knoevenagel condensation reaction. This review aims to discuss the most pertinent heterogeneous catalytic systems such as zeolites, mesoporous silica, ionic liquids, metal oxides, and graphitic carbon nitride-based catalysts in the Knoevenagel reaction. Ultimately, this review focuses not only on the catalyst but also provides an overall idea and guide for the preparation of new catalysts with outstanding properties by looking at the chemical and engineering aspects such as the reaction conditions and the mechanisms.

Conventional and emerging technologies for removal of antibiotics from wastewater.

Antibiotics and pharmaceuticals related products are used to enhance public health and quality of life. The wastewater that is produced from pharmaceutical industries still contains noticeable amount of antibiotics, and this has remained one of the major environmental problems facing public health. The conventional wastewater remediation approach employed by the pharmaceutical industries for the antibiotics wastewater removal is unable to remove the antibiotics completely. Besides, municipal and livestock wastewater also contain unmetabolized antibiotics released by human and animal, respectively. The antibiotic found in wastewater leads to antibiotic resistance challenges, also emergence of superbugs. Currently, numerous technological approaches have been developed to remove antibiotics from the wastewater. Therefore, it was imperative to critically review the weakness and strength of these current advanced technological approaches in use. Besides, the conventional methods for removal of antibiotics such as Klavaroti et al., Homem and Santos also discussed. Although, membrane treatment is discovered as the ultimate choice of approach, to completely remove the antibiotics, while the filtered antibiotics are still retained on the membrane. This study found, hybrid processes to be the best solution antibiotics removal from wastewater. Nevertheless, real-time monitoring system is also recommended to ascertain that, wastewater is cleared of antibiotics.

Vanadium and Nitrogen Co-Doped Titanium Dioxide (TiO2) with Enhanced Photocatalytic Performance: Potential in Wastewater Treatment.

The vanadium (V) and nitrogen (N) dopants on TiO2 demonstrated superior photocatalytic performance for the degradation of methylene blue (MB) dye under visible light. The vanadium, V, N-co-doped TiO2 was synthesized by a modified sol-gel method. It revealed that V and N codoping had a significant effect on the band gap (Eg) of TiO2, where the pristine TiO2 possessed a wide band gap (3.18 eV) compared to V-doped TiO2 (2.89 eV) and N-doped TiO2 (2.87 eV) while the V, N-co-doped TiO2 depicted the narrowest band gap (2.65 eV). The greatly increased specific surface area for the V, N-co-doped TiO2 (103.87 m²/g) as compared to P25 TiO2 (51.68 m²/g) also contributed to the major improvement in the MB dye degradation efficiency (0.055 min-1). The V, N-co-doped TiO2 exhibit rapid photocatalytic activity for the degradation of MB with almost 99% of degradation in 120 minutes.