Albumin adhesion on some biological and non-biological glasses and connection with their Z-potentials.

Evaluating the properties of absorption of albumin on the surface of biomaterials is an important matter in developing information in the field of biomaterials, since it is the most abundant protein present in the human body and it is an any case the first protein that rapidly flows in quantity in a damaged area of a tissue. This study has taken into consideration three different biological glasses and the results were compared with those coming from three different biologically inert glasses. The values obtained were also compared with those coming from the measurements of the Z-potential of the same glasses to verify if a correlation between albumin absorption and Z-potential of the glasses exists. Both types of measurements were carried out at two different pH values: 4.5 and 7.4. These values were selected since the first may be indicative of an acid environment to simulate that of macrophagic action (other than of inflammatory states) and the second simulates the normal condition of a tissue like healthy bone.

Albumin adhesion on ceramics and correlation with their Z-potential.

An investigation into albumin adhesion on ceramics was carried out, providing useful information on the relationship between the Z-potential of ceramic materials and the amount of closely adhered albumin. The chemical nature of the substance constituting the ceramic is mainly responsible for the adhesion, but additional influencing factors are also considered. A differentiation in the amount of adhesion (which is a consequence of the forces of attraction between the ceramic surface and the molecules of albumin) is found and concerns the biological quality of the materials, particularly the bioactive and bioinert ceramics.

Plasma protein adsorption pattern on characterized ceramic biomaterials.

The protein/biomaterial interactions of three biomaterials used in hard tissue surgery were studied in vitro. A dynamic flow system and two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) were used to investigate the adsorption of proteins from diluted human plasma on hydroxyapatite, alumina and zirconia, with regard to total protein binding capacity, relative binding capacity for specific proteins and flow-through and desorption patterns. The ceramics were characterized regarding physicochemical properties; namely, chemical composition by elementary analyses and specific surface, pore volume and pore size distribution using the BET-method and Hg-porosimetry. The materials were found to adsorb a surprisingly low amount of plasma proteins, leaving more than 70% of the surface free. The cellular response will therefore be highly affected by the physico-chemical properties of the material, in contrast to a surface fully covered with proteins. Regarding the adsorption of proteins, most proteins exhibited similar flow-through patterns on the three adsorbents. The exceptions with different flow-through patterns were apolipoprotein D (Apo D), apolipoprotein J (Apo J), complement factor C1s (C1s), complement factor C3 (C3), ceruloplasmin, fibrinogen, alpha1 B glycoprotein and alpha2 HS glycoprotein and serum retinal-binding protein (SRBP). The role of these proteins on acceptance or rejection of implants has to be investigated.

Coatings on zirconia for medical applications.

In order to combine the mechanical properties of a high-strength inert ceramic (yttria-stabilised zirconia, ZrO2-3%Y2O3, defined as zirconia in the text) with the specific properties of bioactive materials, some zirconia samples were coated by two bioactive phosphosilicate glasses and glass-ceramics: RKKP and AP40. Coatings of about 200-300 microm thickness were prepared by a simple and low-cost firing method. They were characterised by optical and scanning electron microscopy (SEM) and compositional analysis (EDS). The adhesion of the coatings on zirconia was tested by shear tests. Vickers indentations at the coating/zirconia interface were performed in order to observe the crack propagation path. The reactivity of glasses and glass-ceramics coatings towards a simulated body fluid (SBF), having the same ion concentration as that of human plasma, was evaluated and compared to that of the bulk glass and glass-ceramics, by examining the morphology of the reaction layer formed on the surface of the coated zirconia after one month of soaking in the SBF at 37 degrees C.

Mineral evolution of bone.

A study on the evolution with age of the mineral composition of bones was performed on samples belonging to human and other common mammalian species (cattle, sheep, dog). The study was carried out on the ashes obtained by calcination of the bone samples (1 h at 900 degrees C). The calcined powders were carefully examined by X-ray diffraction, from which precise quantitative evaluation (also confirmed by chemical analysis) of the crystalline phases present was derived. These data were analysed as a function of the introduced fractional age phi, a new relative scale that allows even largely different lifespan species to be compared. An overall linear increase in (Ca + Mg)/P ratio with log phi was found and the other considerations on molecular constitution (especially as regards Mg2+ substituting for Ca2+ in very young subjects) of the various phases detected were formulated and relative implications evaluated. The results appear promising for an improvement of knowledge in the field of biomedical experimentation and clinical implantology.