RESUMO
PURPOSE: This study presents the implementation and experimental results of a novel technique for 4D tumor tracking using a commercially available and commonly used treatment couch and evaluates the tumor tracking accuracy in clinical settings. METHODS: Commercially available couch is capable of positioning the patient accurately; however, currently there is no provision for compensating physiological movement using the treatment couch in real-time. In this paper, a real-time couch tracking control technique is presented together with experimental results in tumor motion compensation in four dimensions (superior-inferior, lateral, anterior-posterior, and time). To implement real-time couch motion for tracking, a novel control system for the treatment couch was developed. The primary functional requirements for this novel technique were: (a) the treatment couch should maintain all previous∕normal features for patient setup and positioning, (b) the new control system should be used as a parallel system when tumor tracking would be deployed, and (c) tracking could be performed in a single direction and∕or concurrently in all three directions of the couch motion (longitudinal, lateral, and vertical). To the authors' best knowledge, the implementation of such technique to a regular treatment couch for tumor tracking has not been reported so far. To evaluate the performance of the tracking couch, we investigated the mechanical characteristics of the system such as system positioning resolution, repeatability, accuracy, and tracking performance. Performance of the tracking system was evaluated using dosimetric test as an endpoint. To investigate the accuracy of real-time tracking in the clinical setting, the existing clinical treatment couch was replaced with our experimental couch and the linear accelerator was used to deliver 3D conformal radiation therapy (3D-CRT) and intensity modulated radiation therapy (IMRT) treatment plans with and without tracking. The results of radiation dose distribution from these two sets of experiments were compared and presented here. RESULTS: The mechanical accuracies were 0.12, 0.14, and 0.18 mm in X, Y, and Z directions. The repeatability of the desired motion was within ±0.2 mm. The differences of central axis dose between the 3D-CRT stationary plan and two tracking plans with different motion trajectories were 0.21% and 1.19%. The absolute dose differences of both 3D tracking plans comparing to the stationary plan were 1.09% and 1.20%. Comparing the stationary IMRT plan with the tracking IMRT plan, it was observed that the central axis dose difference was -0.87% and the absolute difference of both IMRT plans was 0.55%. CONCLUSIONS: The experimental results revealed that the treatment couch could be successfully used for real-time tumor tracking with a high level of accuracy. It was demonstrated that 4D tumor tracking was feasible using existing couch with implementation of appropriate tracking methodology and with modifications in the control system.
Assuntos
Neoplasias/radioterapia , Radioterapia Assistida por Computador/instrumentação , Robótica , Fenômenos Mecânicos , Movimento , Imagens de Fantasmas , RadiometriaRESUMO
In contemporary brachytherapy procedures, needle placement at the desired target is challenging for a variety of reasons. A robot-assisted brachytherapy system can potentially improve needle placement and seed delivery, resulting in enhanced therapeutic outcome. In this paper we present a robotic system with 16 degrees of freedom (DOF) (9 DOF for the positioning module and 7 DOF for the surgery module) that has been developed and fabricated for prostate brachytherapy. Strategies to reduce needle deflection and target movement were incorporated after extensive experimental validation. Provision for needle motion and force feedback was included in the system to improve robot control and seed delivery. Preliminary experimental results reveal that the prototype system is sufficiently accurate in placing brachytherapy needles.
Assuntos
Braquiterapia/métodos , Próstata , Robótica/métodos , Humanos , Masculino , Próstata/diagnóstico por imagem , Neoplasias da Próstata/radioterapia , Robótica/instrumentação , UltrassonografiaRESUMO
Respiratory and cardiac motions induce displacement and deformation of the tumor volumes in various internal organs. To accommodate this undesired movement and other errors, physicians incorporate a large margin around the tumor to delineate the planning target volume, so that the clinical target volume receives the prescribed radiation dose under any scenario. Consequently, a large volume of healthy tissue is irradiated and sometimes it is difficult to spare critical organs adjacent to the tumor. In this study we have proposed a novel approach to the 4D active tracking and dynamic delivery incorporating the tumor motion prediction technique. This method has been applied to the two commercially available robotic treatment couches. The proposed algorithm can predict the tumor position and the robotic systems are able to continuously track the tumor during radiation dose delivery. Therefore a precise dose is given to a moving target while the dose to the nearby critical organs is reduced to improve the patient treatment outcome. The efficacy of the proposed method has been investigated by extensive computer simulation. The tumor tracking method is simulated for two couches: HexaPOD robotic couch and ELEKTA Precise Table. The comparison results have been presented in this paper. In order to assess the clinical significance, dosimetric effects of the proposed method have been analyzed.
Assuntos
Neoplasias Pulmonares/fisiopatologia , Neoplasias Pulmonares/radioterapia , Movimento , Radioterapia Assistida por Computador/instrumentação , Robótica/instrumentação , Humanos , Fatores de TempoRESUMO
During the prostate brachytherapy procedure, multiple needles are inserted into the prostate and radioactive seeds are deposited. Stabilizing needles are first inserted to provide some rigidity and support to the prostate, ideally this will provide better seed placement and an overall improved treatment. However, there is much speculation regarding the effectiveness of using regular brachytherapy needles as stabilizers. In this study, we explored the efficacy of (1) two types of needles--18 gauge brachytherapy needle vs. 18 gauge hooked needle; and (2) parallel vs. angulated needle configurations to stabilize the prostate. Prostate phantom movement and needle insertion progression were imaged using ultrasound (US). The recorded images were analyzed and prostate displacement was computed from images using implanted artifacts. Experimentation allowed us to further understand the mechanics behind prostate stabilization. We observed superior stabilization by the hooked needles compared to the regular brachytherapy needles (more than 40% for parallel stabilization). Prostate movement was also reduced significantly when regular brachytherapy needles were in an angulated configuration as compared to the parallel configuration (approximately 40%). When the hooked needles were angled for stabilization, further improvement in decreased displacement was observed. In general, for convenience of dosimetric planning, all needles are desired to be in parallel and in this case, hooked needles are better suited to improve stabilization of the prostate. On the other hand, both regular and hooked needles appear to be equally effective in reducing prostate movement when they are in angulated configurations, which will be useful in robotic permanent seed implantation (PSI).
Assuntos
Braquiterapia/instrumentação , Micromanipulação/instrumentação , Agulhas , Implantação de Prótese/instrumentação , Braquiterapia/métodos , Micromanipulação/métodos , Movimento (Física) , Implantação de Prótese/métodosRESUMO
Placement accuracy of different types of surgical needles in soft biological tissues depends on a variety of factors. The needles used for prostate brachytherapy procedures are typically about 200 mm in length and 1.27-1.47 mm in diameter. These needles are prone to deflection and thereby depositing the seeds at a location other than the planned one. Thus tumorous tissues may not receive the planned dose whereas the critical organs may be over-dosed. A significant amount of needle deflection and target movement is related to some procedure-specific criteria and some patient-specific criteria. In this paper we have developed needle insertion force models taking both procedure-specific criteria and patient-specific criteria. These statistical models can be used to estimate the force that the needle will experience during insertion and thereby control the needle to reduce the needle deflection and enhance seed delivery accuracy.
Assuntos
Modelos Biológicos , Agulhas , Próstata/fisiopatologia , Neoplasias da Próstata/fisiopatologia , Implantação de Prótese/instrumentação , Implantação de Prótese/métodos , Simulação por Computador , Dureza , Humanos , Injeções/instrumentação , Injeções/métodos , Masculino , Estresse MecânicoRESUMO
Percutaneous intervention is essential in numerous medical diagnostic and therapeutic procedures. In these procedures, accurate insertion of the surgical needle is very important. But precise interstitial intervention is quite challenging. Robot-assisted needle intervention can significantly improve accuracy and consistency of various medical procedures. To design and control any robotic system, the design and control engineers must know the forces that will be encountered by the system and the motion trajectories that the needling mechanism will have to follow. Several researchers have reported needle insertion forces encountered while steering through soft tissue and soft material phantoms, but hardly any in-vivo force measurement data is available in the literature. In this paper, we present needle insertion forces and motion trajectories measured during actual brachytherapy needle insertion while implanting radioactive seeds in the prostate glands of twenty five patients.
Assuntos
Agulhas , Instrumentos Cirúrgicos , Procedimentos Cirúrgicos Operatórios/métodos , Desenho de Equipamento , Humanos , Cinética , Robótica , Estresse MecânicoRESUMO
Precise interstitial intervention is essential for many medical diagnostic and therapeutic procedures. But accurate insertion and placement of surgical needle in soft tissue is quite challenging. The understanding of the interaction between surgical needle and soft tissue is very important to develop new devices and systems to achieve better accuracy and to deliver quality treatment. In this paper we present the effects of velocity (linear, rotational, and oscillatory) modulation on needle force and target deflection. We have experimentally verified our hypothesis that needle insertion with continuous rotation reduces target movement and needle force significantly. We have observed little changes in force and target deflection in rotational oscillation (at least at lower frequency) of the needle.