Effects of surfactants on the adsorption of norfloxacin onto ferrihydrite: comparison between anionic and cationic surfactants.

There is little information on how widespread surfactants affect the adsorption of norfloxacin (NOR) onto iron oxide minerals. In order to elucidate the effects of various surfactants on the adsorption characteristics of NOR onto typical iron oxides, we have explored the different influences of sodium dodecylbenzene sulfonate (SDBS), an anionic surfactant, and didodecyldimethylammonium bromide (DDAB), a cationic surfactant, on the interactions between NOR and ferrihydrite under different solution chemistry conditions. Interestingly, SDBS facilitated NOR adsorption, whereas DDAB inhibited NOR adsorption. The adsorption-enhancement effect of SDBS was ascribed to the enhanced electrostatic attraction, the interactions between the adsorbed SDBS on ferrihydrite surfaces and NOR molecules, and the bridging effect of SDBS between NOR and iron oxide. In comparison, the adsorption-inhibition effect of DDAB owning to the adsorption site competitive adsorption between NOR and DDAB for the effective sites as well as the steric hindrance between NOR-DDAB complexes and the adsorbed DDAB on ferrihydrite surfaces. Additionally, the magnitude of the effects of surfactants on NOR adsorption declined with increasing pH values from 5.0 to 9.0, which was related to the amounts of surfactant binding to ferrihydrite surfaces. Moreover, when the background electrolyte was Ca2+, the enhanced effect of SDBS on NOR adsorption was caused by the formation of NOR-Ca2+-SDBS complexes. The inhibitory effect of DDAB was due to the DDAB coating on ferrihydrite, which undermined the cation-bridging effect. Together, the findings from this work emphasize the essential roles of widely existing surfactants in controlling the environmental fate of quinolone antibiotics.

Influence of surfactant molecular features on tetracycline transport in saturated porous media of varied surface heterogeneities.

This study aims to understand how surfactants affect the mobility of tetracycline (TC), an antibiotic, through different aquifer media. Two anionic and cationic surfactants, sodium dodecylbenzene sulfonate (SDBS) and cetyltrimethyl ammonium bromide (CTAB), were used to study their influence on TC mobility through clean sand and humic acid (HA)-coated sand. HA coating inhibits TC mobility due to its strong interaction with TC. Both surfactants promoted TC mobility at pH 7.0 due to competitive deposition, steric effect, and increased hydrophilicity of TC. CTAB had a more substantial effect than SDBS, related to the surfactants' molecular properties. Each surfactant's promotion effects were greater in HA-coated sand than in quartz sand due to differences in surfactant retention. CTAB inhibited TC transport at pH 9.0 due to its significant hydrophobicity effect. Furthermore, in the presence of Ca2+, SDBS enhanced TC transport by forming deposited SDBS-Ca2+-TC complexes. On the other hand, CTAB increased TC mobility due to its inhibition of cation bridging between TC and porous media. The findings highlight surfactants' crucial role in influencing the environmental behaviors of tetracycline antibiotics in varied aquifers.

Biochar-derived organic carbon promoting the dehydrochlorination of 1,1,2,2-tetrachloroethane and its molecular size effects: Synergies of dipole-dipole and conjugate bases.

The environmental effects of biochar-derived organic carbon (BDOC) have attracted increasing attention. Nevertheless, it is unknown how BDOC might affect the natural attenuation of widely distributed chloroalkanes (e.g., 1,1,2,2-tetrachloroethane (TeCA)) in aqueous environments. We firstly observed that the kinetic constants (ke) of TeCA dehydrochlorination in the presence of BDOC samples or their different molecular size fractions (<1 kDa, 1∼10 kDa, and >10 kDa) ranged from 9.16×103 to 26.63×103 M-1h-1, which was significantly greater than the ke (3.53×103 M-1h-1) of TeCA dehydrochlorination in the aqueous solution at pH 8.0, indicating that BDOC samples and their different molecular size fractions all could promote TeCA dehydrochlorination. For a given BDOC sample, the kinetic constants (ke) of TeCA dehydrochlorination in the initial pH 9.0 solution was 2∼3 times greater than that in the initial pH 8.0 solution due to more formation of conjugate bases. Interestingly, their DOC concentration normalized kinetic constants (ke/[DOC]) were negatively correlated with SUVA254, and positively correlated with A220/A254 and the abundance of aromatic protein-like/polyphenol-like matters. A novel mechanism was proposed that the CH dipole of BDOC aliphatic structure first bound with the CCl dipole of TeCA to capture the TeCA molecule, then the conjugate bases (-NH-/-NH2 and deprotonated phenol-OH of BDOC) could attack the H atom attached to the ß-C atom of bound TeCA, causing a CCl bond breaking and the trichloroethylene formation. Furthermore, a fraction of >1 kDa had significantly greater ke/[DOC] values of TeCA dehydrochlorination than the fraction of <1 kDa because >1 kDa fraction had higher aliphiticity (more dipole-dipole sites) as well as more N-containing species and aromatic protein-like/polyphenol-like matters (more conjugate bases). The results are helpful for profoundly understanding the BDOC-mediated natural attenuation and fate change of chloroalkanes in the environment.

Transport of sulfanilamide in saturated porous media under different solution chemistry conditions: role of physicochemical characteristics of soils.

Identification of the transport of sulfonamide antibiotics in soils facilitates a better understanding of the environmental fate and behaviors of these ubiquitous contaminants. In this study, the mobility properties of sulfanilamide (SNM, a typical sulfonamide antibiotic) through saturated soils with different physicochemical characteristics were investigated. The results showed that the physicochemical characteristics controlled SNM mobility. Generally, the mobility of SNM was positively correlated with CEC values and soil organic matter content, which was mainly related to the interactions between the organic matter in soils and SNM molecules via π-π stacking, H-bonding, ligand exchange, and hydrophobic interaction. Furthermore, higher clay mineral content and lower sand content were beneficial for restraining SNM transport in the soils. Unlike Na+, Cu2+ ions could act as bridging agents between the soil grains and SNM molecules, contributing to the relatively weak transport of SNM. Furthermore, the trend of SNM mobility in different soil columns was unaffected by solution pH (5.0-9.0). Meanwhile, for a given soil, the SNM mobility was promoted as the solution pH values increased, which was caused by the enhanced electrostatic repulsion between SNM- species and soil particles as well as the declined hydrophobic interaction between SNM and soil organic matter. The obtained results provide helpful information for the contribution of soil physicochemical characteristics to the transport behaviors of sulfonamide antibiotics in soil-water systems.

Biochar improved the solubility of triclocarban in aqueous environment: Insight into the role of biochar-derived dissolved organic carbon.

Biochar as an effective adsorbent can be used for the removal of triclocarban from wastewater. Biochar-derived dissolved organic carbon (BC-DOC) is an important carbonaceous component of biochar, nonetheless, its role in the interaction between biochar and triclocarban remains little known. Hence, in this study, sixteen biochars derived from pine sawdust and corn straw with different physico-chemical properties were produced in nitrogen-flow and air-limited atmospheres at 300-750 °C, and investigated the effect of BC-DOC on the interaction between biochar and triclocarban. Biochar of 600∼750 °C with low polarity, high aromaticity, and high porosity presented an adsorption effect on triclocarban owing to less BC-DOC release as well as the strong π-π, hydrophobic, and pore filling interactions between biochar and triclocarban. In contrast and intriguingly, biochar of 300∼450 °C with low aromaticity and high polarity exhibited a significant solubilization effect rather than adsorption effect on triclocarban in aqueous solution. The maximum solubilization content of triclocarban in biochar-added solution reached approximately 3 times its solubility in biochar-free solution. This is mainly because the solubilization effect of BC-DOC surpassed the adsorption effect of biochar though the BC-DOC only accounted for 0.01-1.5 % of bulk biochar mass. Furthermore, the high solubilization content of triclocarban induced by biochar was dependent on the properties of BC-DOC as well as the increasing BC-DOC content. BC-DOC with higher aromaticity, larger molecular size, higher polarity, and more humic-like matters had a greater promoting effect on the water-solubility of triclocarban. This study highlights that biochar may promote the solubility of some organic pollutants (e.g., triclocarban) in aqueous environment and enhance their potential risk.

Low-molecular-weight aromatic acids mediated the adsorption of Cd2+ onto biochars: effects and mechanisms.

Low-molecular-weight aromatic acids (LWMAAs), a ubiquitous organic substance in natural systems, are important in controlling the environmental fate of potentially toxic metals. However, little is known about the effects of LWMAAs on the interactions between biochars and potentially toxic metals. Herein, the influences of three aromatic acids, including benzoic acid (BA), p-hydroxy benzoic acid (PHBA), and syringic acid (SA), on the adsorption of Cd2+ onto biochars generated at three different pyrolysis temperatures under acidic and neutral conditions were examined. Generally, the adsorption ability of biochars for Cd2+ improved with the increase of pyrolysis temperature, which was ascribed to the increased inorganic element contents (e.g., P, S, and Si) and aromaticity, increasing the complexation between mineral anions and metal ions, and the enhanced cation-π interaction. Interestingly, aromatic acids considerably inhibited the adsorption of Cd2+ onto biochars, which was mainly ascribed to multi-mechanisms, including competition of LWMAA molecules and metal ions for adsorption sites, the pore blocking effect, the weakened interaction between mineral anions and Cd2+ induced by the adsorbed aromatic acids, and the formation of water-soluble metal-aromatic acid complexes. Furthermore, the inhibitory effects of LWMAAs on Cd2+ adsorption intensively depended on the aromatic acid type and followed the order of SA > PHBA > BA. This trend was related to the differences in the physicochemical features (e.g., the octanol/water partition coefficient (log Kow) and molecular size) of diverse LMWAAs. The results of this study demonstrate that the effects of coexisting LMWAAs should not be ignored when biochars are applied in soil remediation and wastewater treatment.