Enhancing Pollutant Mineralization through Organic-Inorganic Defect-Transit Dual S-scheme with a Robust Internal Electric Field.

Achieving superior photomineralization of pollutants relies on a rational design of a dual S-scheme with a robust internal electric field (IEF). In this study, to tackle the low mineralization rate in type-II In2 O3 /In2 S3 (IO/IS) systems, an organic-inorganic dual S-scheme In2 O3 /PDI/In2 S3 (IO/PDI/IS) nanostructured photocatalyst is synthesized via a method combining solvent-induced self-assembly and electrostatic forces. Due to the unique energy band position and strong IEF, the photoinduced defect-transit dual S-scheme IO/PDI/IS facilitates the degradation of lignin and antibiotics. Notably, a promising mineralization rate of 80.9% for sodium lignosulfonate (SL) is achieved. The charge transport pathway of IO/PDI/IS are further validated through the analysis of in situ X-ray photoelectron spectroscopy (in situ XPS), density functional theory calculations, and radical trapping experiments. In-depth, two possible pathways for the photocatalytic degradation of lignin are proposed based on the intermediates monitored by liquid chromatography-mass spectrometry (LC-MS). This study presents a new strategy for the design of organic-inorganic dual S-scheme photocatalysts with a robust IEF for pollutant degradation.

Cyclic Ether Derived Stable Solid Electrolyte Interphase on Bismuth Anodes for Ultrahigh-Rate Sodium-Ion Storage.

The bismuth anode has garnered significant attention due to its high theoretical Na-storage capacity (386 mAh g-1). There have been numerous research reports on the stable solid electrolyte interphase (SEI) facilitated by electrolytes utilizing ether solvents. In this contribution, cyclic tetrahydrofuran (THF) and 2-methyltetrahydrofuran (MeTHF) ethers are employed as solvents to investigate the sodium-ion storage properties of bismuth anodes. A series of detailed characterizations are utilized to analyze the impact of electrolyte solvation structure and SEI chemical composition on the kinetics of sodium-ion storage. The findings reveal that bismuth anodes in both THF and MeTHF-based electrolytes exhibit exceptional rate performance at low current densities, but in THF-based electrolytes, the reversible capacity is higher at high current densities (316.7 mAh g-1 in THF compared to 9.7 mAh g-1 in MeTHF at 50 A g-1). This stark difference is attributed to the formation of an inorganic-rich, thin, and uniform SEI derived from THF-based electrolyte. Although the SEI derived from MeTHF-based electrolyte also consists predominantly of inorganic components, it is thicker and contains more organic species compared to the THF-derived SEI, impeding charge transfer and ion diffusion. This study offers valuable insights into the utilization of cyclic ether electrolytes for Na-ion batteries.

Strong Yet Tough Transparent Paper with Superb Foldability.

Transparent paper manufactured from wood fibers is emerging as a promising, cost-effective, and carbon-neutral alternatives to plastics. However, fully exploring their mechanical properties is one of the most pressing challenges. In this work, a strong yet tough transparent paper with superior folding endurance is prepared by rationally altering the native fiber structure. Microwave-assisted choline chloride/lactic acid deep eutectic solvent (DES) pulping is first utilized to isolate wood fibers from spruce wood. During this process, the S1 layer within the fibers is partially disrupted, forming protruding microfibrils that play a crucial role in enhancing cellulose accessibility. Subsequently, carboxymethylation treatment is applied to yield uniformly swollen carboxymethylated wood fibers (CM fibers), which improves the interaction between CM fibers during papermaking. The as-prepared transparent paper not only shows a 90% light transmittance (550 nm) but also exhibits impressive mechanical properties, including a folding endurance of over 26 000, a tensile strength of 248.4 MPa, and a toughness of 15.6 MJ m-3. This work provides a promising route for manufacturing transparent paper with superior mechanical properties from wood fibers and can extend their use in areas normally dominated by high-performance nonrenewable plastics.

Multifunctional Super-Hydrophilic MXene/Biomass Composite Aerogel Evaporator for Efficient Solar-Driven Desalination and Wastewater Treatment.

Solar-driven interfacial evaporation is recognized as a sustainable and effective strategy for desalination to mitigate the freshwater scarcity issue. Nevertheless, the challenges of oil contamination, salt accumulation, and poor long-term stability of the solar desalination process limit its applications. Herein, a 3D biomass-based multifunctional solar aerogel evaporator is developed for water production with fabricated chitosan/lignin (CSL) aerogel as the skeleton, encapsulated with carbonized lignin (CL) particles and Ti3C2TiX (MXene) nanosheets as light-absorbing materials. Benefitting from its super-hydrophilic wettability, interconnected macropore structure, and high broadband light absorption (ca. 95.50%), the prepared CSL-C@MXene-20 mg evaporator exhibited a high and stable water evaporation flux of 2.351 kg m-2 h-1 with an energy conversion efficiency of 88.22% under 1 Sun (1 kW m-2) illumination. The CSL-C@MXene-20 mg evaporator performed excellent salt tolerance and long-term solar vapor generation in a 3.5 wt.% NaCl solution. Also, its super-hydrophilicity and oleophobicity resulted in superior salt resistance and anti-fouling performance in high salinity brine (20 wt.% NaCl) and oily wastewater. This work offers new insight into the manufacture of porous and eco-friendly biomass-based photothermal aerogels for advanced solar-powered seawater desalination and wastewater purification.

Structure and Interface Engineering of Ultrahigh-Rate 3D Bismuth Anodes for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have attracted tremendous attention as promising low-cost energy storage devices in future grid-scale energy management applications. Bismuth is a promising anode for SIBs due to its high theoretical capacity (386 mAh g-1 ). Nevertheless, the huge volume variation of Bi anode during (de)sodiation processes can cause the pulverization of Bi particulates and rupture of solid electrolyte interphase (SEI), resulting in quick capacity decay. It is demonstrated that rigid carbon framework and robust SEI are two essentials for stable Bi anodes. A lignin-derived carbonlayer wrapped tightly around the bismuth nanospheres provides a stable conductive pathway, while the delicate selection of linear and cyclic ether-based electrolytes enable robust and stable SEI films. These two merits enable the long-term cycling process of the LC-Bi anode. The LC-Bi composite delivers outstanding sodium-ion storage performance with an ultra-long cycle life of 10 000 cycles at a high current density of 5 A g-1 and an excellent rate capability of 94% capacity retention at an ultrahigh current density of 100 A g-1 . Herein, the underlying origins of performance improvement of Bi anode are elucidated, which provides a rational design strategy for Bi anodes in practical SIBs.

More Accurate Method for Evaluating the Activity of Photocatalytic Hydrogen Evolution and Its Reaction Kinetics Equation.

Photocatalytic water splitting to hydrogen is a sustainable energy conversion method. However, there is a lack of sufficiently accurate measurement methods for an apparent quantum yield (AQY) and a relative hydrogen production rate (rH2) at the moment. Thus, a more scientific and reliable evaluation method is highly required to allow the quantitative comparison of photocatalytic activity. Herein, a simplified kinetic model of photocatalytic hydrogen evolution was established, the corresponding photocatalytic kinetic equation was deduced, and a more accurate calculation method is proposed for the AQY and the maximum hydrogen production rate vH2,max. At the same time, new physical quantities, absorption coefficient kL and specific activity SA, were proposed to sensitively characterize the catalytic activity. The scientificity and practicality of the proposed model and the physical quantities were systematically verified from the theoretical and experimental levels.

Functionalized Regulation of Metal Defects in ln2S3 of p-n Homojunctions.

The introduction of metal vacancies into n-type semiconductors could efficiently construct intimate contact interface p-n homojunctions to accelerate the separation of photogenerated carriers. In this work, a cationic surfactant occupancy method was developed to synthesize an indium-vacancy (VIn)-enriched p-n amorphous/crystal homojunction of indium sulfide (A/C-IS) for sodium lignosulfonate (SL) degradation. The amount of VIn in the A/C-IS could be regulated by varying the content of added cetyltrimethylammonium bromide (CTAB). Meanwhile, the steric hindrance of CTAB produced mesopores and macropores, providing transfer channels for SL. The degradation rates of A/C-IS to SL were 8.3 and 20.9 times higher than those of crystalline In2S3 and commercial photocatalyst (P25), respectively. The presence of unsaturated dangling bonds formed by VIn reduced the formation energy of superoxide radicals (•O2-). In addition, the inner electric field between the intimate contact interface p-n A/C-IS promoted the migration of electron-hole pairs. A reasonable degradation pathway of SL by A/C-IS was proposed based on the above mechanism. Moreover, the proposed method could also be applicable for the preparation of p-n homojunctions with metal vacancies from other sulfides.

Ru-FeNi Alloy Heterojunctions on Lignin-derived Carbon as Bifunctional Electrocatalysts for Efficient Overall Water Splitting.

Rational design of efficient, stable, and inexpensive bifunctional electrocatalysts for oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) is a key challenge to realize green hydrogen production via electrolytic water splitting. Herein, Ru nanoparticles and FeNi alloy heterojunction catalyst (Ru-FeNi@NLC) encapsulated via lignin-derived carbon was prepared by self-assembly precipitation and in situ pyrolysis. The designed catalyst displays excellent performance at 10 mA cm-2 with low overpotentials of 36 mV for HER and 198 mV for OER, and only needs 1.48 V for overall water splitting. Results and DFT calculations show the unique N-doped lignin-derived carbon layer and Ru-FeNi heterojunction contribute to optimized electronic structure for enhancing electron transfer, balanced free energy of reactants and intermediates in the sorption/desorption process, and significantly reduced reaction energy barrier for the HER and OER rate-determining steps, thus improved reaction kinetics. This work provides a new in situ pyrolysis doping strategy based on renewable biomass for the construction of highly active, stable and cost-effective catalysts.

Monodispersed Lignin Colloidal Spheres with Tailorable Sizes for Bio-Photonic Materials.

Lignin colloidal spheres (LCSs) are promising biomaterials for application in drug storage and delivery, pollutant adsorption, and ultraviolet protection due to their biocompatibility, amphiphilicity, and conjugated structure. However, wide size distribution of LCSs greatly limits their performances, especially in many precise and advanced applications. Herein, the fabrication of monodispersed LCSs with tailorable sizes ranging from the nanoscale to microscale is reported. Lignin raw materials are first fractionated by solvent extraction, and then the lignin fraction is used to fabricate monodispersed LCSs by solvent/antisolvent self-assembly. The underlying mechanism for the formation of monodispersed LCS is primarily ascribed to the improved homogeneity of long-range intermolecular forces, especially the electrostatic forces and hydrophobic forces, between lignin molecules. Moreover, by manipulating the short-range order of LCSs, an innovative application of lignin as bio-photonic materials with tunable structural colorations (e.g., red, green, or blue) is demonstrated. This work not only provides deep insight and an effective strategy to eliminate the serious inhomogeneity of LCSs, but also makes lignin resources have great potential as biodegradable and biocompatible photonic materials in diverse advanced optical application fields such as photonic devices, anti-counterfeiting labels, and structural color pigments.

Bioinspired Lignin-Polydopamine Nanocapsules with Strong Bioadhesion for Long-Acting and High-Performance Natural Sunscreens.

UV filters that contain one or two aromatic rings in conventional sunscreens generally have a poor photo- and thermal stability and can easily penetrate through stratum corneum and dermis into the blood vessel, thus causing potential health-threatening issues. Herein, a series of bioinspired photostable and biocompatible polydopamine-grafted lignin (AL-PDA) with strong bioadhesion have been synthesized through free radical addition of dopamine (DA) and alkali lignin (AL). AL-PDA was used to emulsify organic UV filters and further cross-linked to form nanocapsules through ultrasonic cavitation. The retention rate of optimal AL-PDA nanocapsules on the skin surface reached 87% after a thorough rinse with water and negligible penetration was observed, which demonstrates their excellent bioadhesion property. Force measurements using atomic force microscopy (AFM) quantitatively revealed the adhesion between the nanocapsules and skin. An average DA grafting number of 4 would be required to endow the AL-PDA nanocapsules with suitable water-penetration resistance. The nanocapsules were used as the sole active ingredient for formulating sunscreen, whose sun protection factor (SPF) value could reach 195.33 with a dosage ∼10 wt % lasting for over 8 h under UV radiation. The as-prepared nanocapsules possess excellent antioxidant capacity and biocompatibility, ensuring their superior performance and safe use in the sunscreen. This work provides new insights into the development of biomass lignin for advanced function materials and high-end products.

Efficient Removal of Cu2+ in Water by Carboxymethylated Cellulose Nanofibrils: Performance and Mechanism.

Simultaneous production and functionalization of cellulose nanofibrils (CNFs) for heavy metal ion removal is an economical and promising solution to expedite their use in water treatment. In this work, carboxymethylated CNFs (CMCNFs) with a carboxylate content up to 2.7 mmol/g are prepared by a combination of carboxymethylation and homogenization, which show diameters of 3.40-3.53 nm and lengths of 1210.6-383.3 nm. The effect of experimental conditions (including pH, carboxylate content, contact time, initial Cu2+ concentration) on the removal performance of CMCNFs for Cu2+ is investigated in detail. Adsorption performances of CMCNFs present a record high equilibrium Cu2+ removal capacity of 115.3 mg/g at pH 5.0. Additionally, the underlying mechanism for the removal of Cu2+ ions was uncovered by coupling the fitting results based on pseudo-second-order kinetic and Langmuir isotherm models with various characterizations such as scanning electron microscopy, energy dispersive spectroscopy (EDS), EDS mapping, X-ray photoelectron spectroscopy, atomic force microscopy, and powder X-ray diffraction. Finally, the potential application of CMCNF-2.7 with high carboxylate content in converting copper-contaminated water into drinking water was demonstrated. CMCNFs provide a new selection for the design of novel nanocellulose-based materials for water treatments.

Microwave-assisted oxidative digestion of lignin with hydrogen peroxide for TOC and color removal.

Dilute lignin solution was successfully digested into colorless and clarified liquor under microwave-assisted oxidative digestion with hydrogen peroxide. High dosage of hydrogen peroxide is needed to effectively digest lignin, but excessive hydrogen peroxide may lead to recondensation of formed fragments in digested lignin. Microwave irradiation greatly facilitates the oxidative digestion of lignin. Compared with conventional heating technique, microwave-assisted digestion achieves the same or higher digestion rate within a shorter time and/or at lower temperature. After digestion, total organic carbon content of lignin solution decreases by 93.9%, and a small amount of aliphatic alkane, alcohol, acid and ester are formed via the cleavage of aromatic rings as well as the deprivation of side chains in original lignin. This work provides an alternative way to efficiently treat spent pulping liquor.

Understanding Lignin Dissolution with Urea and the Formation of a Lignin Nano-Aggregate: A Multiscale Approach.

This study employs a combined computational and experimental approach to elucidate the mechanisms governing the interaction between lignin and urea, impacting lignin dissolution and subsequent aggregation behavior. Molecular dynamics (MD) simulations reveal how the urea concentration and temperature influence lignin conformation and interactions. Higher urea concentrations and temperatures promote lignin dispersion by disrupting intramolecular interactions and enhancing solvation. Density functional theory (DFT) calculations quantitatively assess the interaction energy between lignin and urea, supporting the findings from MD simulations. Anti-solvent precipitation demonstrates that increasing the urea concentration hinders the self-assembly of lignin nanoclusters. The findings provide valuable insights for optimizing lignin biorefinery processes by tailoring the urea concentration and temperature for efficient extraction and dispersion. Understanding the influence of urea on lignin behavior opens up avenues for designing novel lignin-based materials with tailored properties. This study highlights the potential for the synergetic application of MD simulations and DFT calculations to unravel complex material interactions at the atomic level.

Lignin organic molecule aggregate derived turbine-like nanocarbon with high nitrogen doping for potassium ion hybrid capacitors.

Potassium-ion hybrid capacitors (PIHCs) represent a burgeoning class of electrochemical energy storage devices characterized by their remarkable energy and power densities. Utilizing amorphous carbon derived from sustainable biomass presents an economical and environmentally friendly option for anode material in high-rate potassium-ion storage applications. Nevertheless, the potassium-ion storage capacity of most biomass-derived carbon materials remains modest. Addressing this challenge, nitrogen doping engineering and the design of distinctive nanostructures emerge as effective strategies for enhancing the electrochemical performance of amorphous carbon anodes. Developing highly nitrogen-doped nanocarbon materials is a challenging task because most lignocellulosic biomasses lack nitrogen functional groups. In this work, we propose a general strategy for directly carbonizing supermolecule-mediated lignin organic molecular aggregate (OMA) to prepare highly nitrogen-doped biomass-derived nanocarbon. We obtained lignin-derived, highly nitrogen-doped turbine-like carbon (LNTC). Featuring a three-dimensional turbine-like structure composed of amorphous, thin carbon nanosheets, LNTC demonstrated a capacity of 377 mAh g-1 when used as the anode for PIHCs. This work also provides a new synthesis method for preparing highly nitrogen-doped nanocarbon materials derived from biomass.

The Critical Role of Ca2+ in Improving the Transparency and Strength of High-Filler-Content Nanocellulose/Montmorillonite Nanocomposite Films.

Strong and transparent nanocellulose/montmorillonite (MMT) nanocomposite films with high filler content (≥50 wt %) are emerging as versatile materials for advanced applications due to their excellent optical, barrier, mechanical, and thermal properties, and environmental friendliness. Nonetheless, these films undergo a notable decline in optical and mechanical properties at high MMT loadings. This study first demonstrates that calcium-ion-induced tactoids are the key factor causing disordered structures in nanocomposite films, leading to the degradation of optical and mechanical properties. We then address this issue by employing a Ca2+ removal strategy─dialysis. Through removing 43% of free Ca2+, simultaneous improvements in both properties are observed. For example, in a nanocomposite film with 70 wt % MMT, light transmittance increases from 75.9 to 91.6%, and the tensile strength rises from 100.4 to 139.4 MPa. This work offers insights into developing strong and transparent nanocomposite films with high MMT contents.

Ultrasonic-assisted synthesis of lignin-based ultrasmall silver nanoparticles for photothermal-mediated sterilization.

Lignin-based silver nanoparticles have been considered a promising antimicrobial material. However, it remains challenging to prepare ultra-small size silver nanoparticles sustainably with superior antibacterial performance. In this work, we modified ethanol-extracted lignin (EL) with carboxymethyl groups and further synthesized ultra-small particle size (3.8 ± 0.1 nm) nanosilver incorporated carboxymethyl lignin complexes (AgNPs@CEL) using ultrasonic technology. Due to the outstanding antibacterial properties of the ultra-small size nanosilver, AgNPs@CEL could cause 5.3 and 5.4 log10 CFU/mL reduction against E. coli and S. aureus in 5 min. Meanwhile, AgNPs@CEL exhibited remarkable photothermal antibacterial performance, which caused 6.2 and 6.1 log10 CFU/mL reduction of E. coli and S. aureus, with NIR irradiation for 5 min. Furthermore, the composite films prepared by doping only 0.5 wt% AgNPs@CEL into ethyl cellose could achieve a bactericidal rate more than 99.99 %. This study provides a new insight into design of controlled particle size lignin-based antibacterial nanosilver materials in a sustainable manner and holds promise for applications in antibacterial fields.

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors.

Constructing heteroatom-doped porous carbons with distinct charge storage properties is significant for high-energy-density supercapacitors, yet it remains a formidable challenge. Herein, we employed a thiocyanogen-modulated alkali activation strategy to synthesize N and S co-doped lignin hierarchical porous carbon (NSLHPC). In this process, thiocyanogen serves as a surface modulation mediator to substitute oxygen with nitrogen and sulfur species, while the combination of KOH activation and MgO template generates numerous nanopores within the carbon structure. The three-dimensional interconnected nanosheet architecture facilitates rapid ion transfer and enhances accessibility to active sites. Density functional theory (DFT) calculations demonstrate that introducing N and S heteroatoms through oxygen substitution reduces the adsorption energy barrier of Zn2+. Consequently, the optimized NSLHPC exhibits a remarkable specific capacitance of 438F/g at 0.5 A/g in 6 M KOH, delivering an energy density of 10.4 Wh/kg in the symmetric supercapacitor and an impressive energy density of 104.9 Wh/kg in the zinc-ion hybrid capacitor. The NSLHPC cathode also shows an excellent lifespan with capacitance retention of 99.0 % and Columbic efficiency of 100 % over 10,000 cycles. This study presents innovative strategies for engineering high-performance porous carbon electrode materials by emphasizing pore structure modulation and N, S co-doping as crucial approaches.

Melt-processable polyvinyl alcohol/lignin composites with improved strength via synergistic plasticization of lignin.

The characteristics of multi-hydroxyl structure and strong hydrogen bonding in polyvinyl alcohol (PVA) make its melting point close to its decomposition temperature, causing melt-processing difficulty. In this work, following the plasticization of small-molecule primary plasticizer acetamide, lignin was demonstrated as a green secondary plasticizer in realizing the melt processing and simultaneous reinforcement of PVA. During the plasticization process, lignin was able to combine with the hydroxyl groups of PVA, so as to destroy the hydrogen bonds and regularity of the PVA chains. The synergistic plasticization effect of lignin dramatically reduced the melting point of PVA from 185 °C to 151 °C. The thermal processing window of PVA composites was expanded from 50 °C to roughly 80 °C after introducing lignin. In contrast to acetamide, the addition of lignin significantly increased the tensile strength and Young's modulus of the composites to 71 MPa and 1.34 GPa, respectively. Meanwhile, lignin helped to hinder the migration of acetamide via hydrogen bonds. With the addition of lignin, the composites also displayed enhanced hydrophobicity and excellent UV shielding performance. The strategy of synergistic plasticization of lignin provides a feasible basis for the practical application of lignin in melt-processable PVA materials with good comprehensive properties.

Long-lasting UV-blocking Mechanism of Lignin: Origin and Stabilization of Semiquinone Radicals.

Semiquinone (SQ) radicals play a critical role in the long-lasting UV-blocking application of lignin, while their origin and stable structure are unclear. Here, the organosolv lignin extracted from poplar (OL-P) is self-assembled into normal micelles (LNM) with more phenolic hydroxyl groups on the surface, and reverse micelles (LRM) with more methoxyl groups on the surface. After 12 h UV irradiation, the SQ radical contents in LNM and LRM increase 33% and 78% respectively. The performance of LNM based sunscreen keeps upswinging due to radical stabilization of phenolic hydroxyl groups. LRM based sunscreen experiences a gradual decrease after reaching maximum UV absorbance due to the quick generation and over oxidation of SQ radicals. Density functional theory (DFT) simulations reveal that methoxyl groups in OL-P has bigger bond length and smaller bond dissociation enthalpy than phenolic hydroxyl groups, and are easy to form SQ radicals. The Gibbs free energy (ΔG) needed for SQ-quinone transformation is above 26.10 kcal mol.-1 , while that for SQ-hydroquinone transformation is below -66.78 kcal mol.-1 . Hydroquinone is the stable structure of SQ radicals. This work discloses the origin and stable structure of SQ radicals in lignin under UV irradiation, and provides an important guidance for its long-lasting UV-blocking application.