RESUMO
The porous ZnMn2O4 nanostructures have been synthesized by hydrothermal method by using Mn3O4 and Zn powder as precursors. The morphology of the nanoparticles could be tuned by changing the molar ratio of Zn in the reaction system. The final products have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, UV-visible spectroscopy and the florescence spectrometer. Room temperature photoluminescence investigation indicates that the nanostructures have strong band-gap emission at yellow and orange bands. Absorption properties of ZnMn2O4 nanostructures indicated that the band gap energy varied with change in the atomic percentage of Zn in hetaerolite ZnMn2O4. The mechanism of this peculiar optical property was analyzed.
RESUMO
Tin monoxide is a significant functional semiconductor material which employed to a wide area of applications especially optical and energy storage devices. Presently, template free hydrothermal technique has been employing to synthesize stannous oxide (SnO) clinopinacoid type controlled morphology using SnCl2 x 2H2O, NH3, and H2O as raw materials. The crystalline phase, morphology, particle size and component were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) and field-emission scanning electron microscopy (FESEM). FESEM results exhibited the large scale homogeneous growth of clinopinacoid architecture with the obvious size of 5 - 7 micrometers. The XRD results showed that the average crystallite size of the tetragonal phase romarchite SnO was about 29 nm calculated from the FWHM of X-ray diffraction pattern. The dominant Raman active modes A(1g) = 205 cm(-1), B(1g) = 105-107 cm(-1) and about 6 cm(-1) redshift were observed by the Raman spectroscopy, which further confirmed the existence of the nano tetragonal phase SnO. The electrochemical performance of as-synthesized SnO clinopinacoid structure as the anode material for lithium ion batteries was investigated. It was observed that the first discharge capacity of the two samples could reach a very high value of 1502 mA h g(-1) and 1422 mA h g(-1) respectively. The effect of nitrogen concentration on morphology as well as cyclic performance of Li-Ion-batteries was also discussed.