A Novel Apparatus for the Fully Automated Extraction and Online Liquid Chromatographic Analysis of Solid Environmental Samples: Application to the Pressurized Hot Water Extraction of Pharmaceuticals in Soil.

A new self-assembled apparatus for the extraction of solid samples was designed and implemented to perform a recirculated pressurized hot water extraction (R-PHWE) directly coupled to liquid chromatography-tandem mass spectrometry. To investigate the potential of this new extraction apparatus, 34 target pharmaceutical compounds were analyzed in loam, silt-loam, and silty-clay-loam soils. The target analytes were characterized by heterogeneous physicochemical properties (e.g., -1.60 ≤ log D ≤ 5.91 at pH = 7.2, i.e., at the mean pH values of the three soils). Design of experiments (DoE) was used to identify the best extraction conditions for the target analytes by studying temperature, pressure, and number of extraction cycles. The results of DoE optimization pointed out the significant influence of the number of cycles on recovery. The application of DoE set point to the three reference soils provided recoveries ≥60% for 21-25 out the 34 target analytes, depending on soil. Good recovery precision (<25%) and moderate suppressive matrix effect (≤40%) were found for most target analytes, regardless of the soil considered. The optimized R-PHWE procedure evidenced statistically higher recoveries for 16 out of 34 target analytes when compared to conventional off-line dynamic PHWE.

Biochar from co-pyrolysis of biological sludge and sawdust in comparison with the conventional filling media of vertical-flow constructed wetlands for the treatment of domestic-textile wastewater.

A biochar from co-pyrolysis of a mixture of sawdust and biological sludge (70/30, w/w), providing a high environmental compatibility in terms of water leachable polycyclic aromatic hydrocarbons and inorganic elements, together with a remarkable surface area (389 m2/g), was integrated into laboratory-scale vertical-flow constructed wetlands (VF-CWs), planted with Phragmites australis and unplanted. Biochar-filled VF-CWs have been tested for 8 months for the refining of effluents from the tertiary clariflocculation stage of a wastewater treatment plant operating in a mixed domestic-industrial textile context, in comparison with systems filled with gravel. VF-CW influents and effluents were monitored for chemical oxygen demand (COD), nitrogen and phosphorus cycles, and absorbance values at 254 and 420 nm, the latter as rapid and reliable screening parameters of the removal of organic micropollutants containing aromatic moieties and/or chromophores. Biochar-based systems provided a statistically significant improvement in COD (Δ = 22%) and ammonia (Δ = 35%) removal, as well as in the reduction of UV-Vis absorbance values (Δ = 32-34% and Δ = 28% for 254 and 420 nm, respectively), compared to gravel-filled microcosms. The higher removal of organic was mainly attributed to the well-known adsorption properties of biochars, while for nitrogen the biological mechanisms seem to play a predominant role.

Comparison of chemometric strategies for potential exposure marker discovery and false-positive reduction in untargeted metabolomics: application to the serum analysis by LC-HRMS after intake of Vaccinium fruit supplements.

Untargeted liquid chromatographic-high-resolution mass spectrometric (LC-HRMS) metabolomics for potential exposure marker (PEM) discovery in nutrikinetic studies generates complex outputs. The correct selection of statistically significant PEMs is a crucial analytical step for understanding nutrition-health interactions. Hence, in this paper, different chemometric selection workflows for PEM discovery, using multivariate or univariate parametric or non-parametric data analyses, were comparatively tested and evaluated. The PEM selection protocols were applied to a small-sample-size untargeted LC-HRMS study of a longitudinal set of serum samples from 20 volunteers after a single intake of (poly)phenolic-rich Vaccinium myrtillus and Vaccinium corymbosum supplements. The non-parametric Games-Howell test identified a restricted group of significant features, thus minimizing the risk of false-positive retention. Among the forty-seven PEMs exhibiting a statistically significant postprandial kinetics, twelve were successfully annotated as purine pathway metabolites, benzoic and benzodiol metabolites, indole alkaloids, and organic and fatty acids, and five (i.e. octahydro-methyl-ß-carboline-dicarboxylic acid, tetrahydro-methyl-ß-carboline-dicarboxylic acid, citric acid, caprylic acid, and azelaic acid) were associated to Vaccinium berry consumption for the first time. The analysis of the area under the curve of the longitudinal dataset highlighted thirteen statistically significant PEMs discriminating the two interventions, including four intra-intervention relevant metabolites (i.e. abscisic acid glucuronide, catechol sulphate, methyl-catechol sulphate, and α-hydroxy-hippuric acid). Principal component analysis and sample classification through linear discriminant analysis performed on PEM maximum intensity confirmed the discriminating role of these PEMs.

Electrochemical sensors based on sewage sludge-derived biochar for the analysis of anthocyanins in berry fruits.

The reutilization of waste and the reduction of the general environmental impact of every production are fundamental goals that must be achieved in the framework of a circular economy. Recycled carbon-rich materials may represent a promising alternative to other less-sustainable carbonaceous materials used in the production of electrochemical sensing platforms. Herein, we propose an innovative carbon paste electrode (CPE) composed of biochar derived from biological sludge obtained from municipal and industrial wastewater treatment plants. The physicochemical properties of the biochar after a chemical treatment with an acidic solution obtained from industrial by-products were investigated. The electrode surface characterization was carried out by analyzing common redox probes and multiple phenols bearing varying numbers of -OH and -OCH3 groups in their structure. Furthermore, the CPE was also tested on the evaluation of the phenolic fingerprints of Vaccinium myrtillus, Vaccinium uliginosum subsp. gaultherioides, and Fragaria × ananassa. Standard anthocyanin mixtures and extracts of the aforementioned fruits were analyzed to provide a phenolic characterization of real samples. The obtained results show that the sewage sludge-derived biochar can be a promising material for the development of electroanalytical sensors.

Vaccinium myrtillus L. extract and its native polyphenol-recombined mixture have anti-proliferative and pro-apoptotic effects on human prostate cancer cell lines.

Vaccinium myrtillus berry extract (VME) and a recombined standard mixture (RSM) of its main native phenolic compounds were investigated for cell growth inhibition and pro-apoptotic activity on hormone-dependent (LNCaP) and hormone-independent (PC3 and DU-145) prostate cancer (PCa) cell lines. Normal prostate epithelial cells (PrEC) were also studied in comparison. VME hindered anchorage-dependent PCa cell proliferation in a dose-dependent manner, that is, at 1/800 (v/v) dilution for LNCaP and PC3, and 1/100 (v/v) dilution for DU-145 (corresponding to 14.15 and 113.2 µg cyanidin-3-O-glucoside equivalents per ml of culture medium), respectively. VME had a growth inhibitory effect towards PrEC at the same dilution of DU-145 cells although the IC50 values indicated that PrEC are more resistant than PCa cell lines. VME also reduced the anchorage-independent growth of PCa cells. The study of the apoptotic profile (i.e., non-apoptotic, early apoptotic, late apoptotic and necrotic cells) evidenced that the apoptotic rate (early+late) was statistically higher in all three cell lines exposed to VME compared to control. Anchorage-dependent and anchorage-independent growth inhibition of RSM was very similar to that displayed by VME. Moreover, RSM exerted its growth inhibitory effect also under hypoxia, the latter representing a biological condition known to sustain PCa proliferation and aggressiveness.

Productivity and nutritional and nutraceutical value of strawberry fruits (Fragaria x ananassa Duch.) cultivated under irrigation with treated wastewaters.

BACKGROUND: Agriculture represents a productive sector typically characterized by a high water demand, whereas freshwater (FW) availability is a problem of increasing concern in the world and FW resources are becoming insufficient for sustaining agricultural irrigation. The reuse of treated wastewaters (TWWs) for crop irrigation could be an efficient tool for reducing water shortage. Hence, the present study evaluated the food quality of Fragaria x ananassa (cultivar Camarosa) fruits irrigated with four types of treated wastewaters (TWWs). Strawberries were analysed for yield, sucrose, fructose, glucose, total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and antiradical and antioxidant capacity. In addition, a targeted quantification of the most representative phenolic compounds of strawberry was performed. RESULTS: TWWs complied the Italian ministerial decree 185/2003 for wastewater reuse, with very few exceptions, mainly represented by chloride concentrations (258-643 mg L-1 versus a legal threshold of 250 mg L-1 ). The reuse of TWWs reduced fruit yield (10-26%) compared to irrigation with tap water as a control. Irrigation with TWWs gave also rise to the decrease of total sugars (14-26%), TSP (2-10%) and TMA (29-49%). Individual phenolic acids, flavonols and flavanols were quite stable in response to the irrigation with TWWs, whereas anthocyanidins decreased significantly. CONCLUSION: Although TWWs negatively affected fruit quality, the nutritional and nutraceutical parameters determined in the present study were in line with data previously reported for strawberries purchased in the market or cultivated in research orchards, thus suggesting that the use of TWWs does not prevent the fruit marketability. © 2020 Society of Chemical Industry.

Consolidating two-dimensional liquid chromatography-high-resolution tandem mass spectrometry (LC×LC-HRMS/MS) technique for the non-targeted analysis of poly- and perfluorinated substances: A trial on aqueous film-forming foams.

To date, poly- and perfluoroalkyl substances (PFAS) represent a real threat for their environmental persistence, wide physicochemical variability, and their potential toxicity. Thus far a large portion of these chemicals remain structurally unknown. These chemicals, therefore, require the implementation of complex non-targeted analysis workflows using liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) for their comprehensive detection and monitoring. This approach, even though comprehensive, does not always provide the much-needed analytical resolution for the analysis of complex PFAS mixtures such as fire-fighting aqueous film-forming foams (AFFFs). This study consolidates the advantages of the LC×LC technique hyphenated with high-resolution tandem mass spectrometry (HRMS/MS) for the identification of PFAS in AFFF mixtures. A total of 57 PFAS homolog series (HS) were identified in 3M and Orchidee AFFF mixtures thanks to the (i) high chromatographic peak capacity (n'2D,c ~ 300) and the (i) increased mass domain resolution provided by the "remainder of Kendrick Mass" (RKM) analysis on the HRMS data. Then, we attempted to annotate the PFAS of each HS by exploiting the available reference standards and the FluoroMatch workflow in combination with the RKM defect by different fluorine repeating units, such as CF2, CF2O, and C2F4O. This approach resulted in 12 identified PFAS HS, including compounds belonging to the HS of perfluoroalkyl carboxylic acids (PFACAs), perfluoroalkyl sulfonic acids (PFASAs), (N-pentafluoro(5)sulfide)-perfluoroalkane sulfonates (SF5-PFASAs), N-sulfopropyldimethylammoniopropyl perfluoroalkane sulfonamides (N-SPAmP-FASA), and N-carboxymethyldimethylammoniopropyl perfluoroalkane sulfonamide (N-CMAmP-FASA). The annotated categories of perfluoroalkyl aldehydes and chlorinated PFASAs represent the first record of PFAS HS in the investigated AFFF samples.

First Data on the (Poly)phenolic Profiling of Farmacista Honorati Persimmon Fruit (Diospyros kaki Thunb.) at Commercial Harvest and after Treatments for Astringency Removal.

This study aims to provide the first report on the soluble and polyphenolic profiles of "Farmacista Honorati" (FH) persimmons, which is a marketed cultivar with no existing data on its nutraceutical value. Total soluble tannins (TSTs) and major soluble (poly)phenols in FH fruits before and after post-harvest commercial treatments with carbon dioxide and ethylene were analyzed. Fruits at commercial harvest had a TST content of 1022 ± 286 mg GAL/100 g d.w. Whereas, after deastringency treatments, an 85% and 83% reduction were observed for carbon dioxide- and ethylene-treated fruits, respectively. Carbon dioxide treatment resulted in the insolubilization of tannins around comparable values in most fruit cultivars, despite the variable soluble tannin content in untreated fruit. By targeted metabolomic profiling, nineteen (poly)phenolic substances were quantified in the investigated untreated and treated fruits. Gallic acid (99 mg/100 g d.w.), (+)-catechin (1.8 mg/100 g d.w.), ellagic acid (1.2 mg/100 g d.w.), and (-)-epicatechin (1.1 mg/100 g d.w.) were the predominant compounds in the untreated FH samples. After the application of post-harvest treatments, a non-nutraceutical relevant decrease of 8-19% in the targeted (poly)phenolic content was generally observed. Ethylene induced the most significant reduction in the individual (poly)phenolic compounds in the FH fruits.

Biochar from co-pyrolysis of biological sludge and woody waste followed by chemical and thermal activation: end-of-waste procedure for sludge management and biochar sorption efficiency for anionic and cationic dyes.

Nine biochars were produced by co-pyrolysis of sawdust and biological sludge following the "design of experiment" approach. Two kinds of sludge (both deriving from the treatment of mixed industrial-municipal wastewater) and two types of woody waste were selected as categorical predicting variables, while contact time, pyrolysis temperature, and sludge percentage were used as quantitative variables. Biochars were analysed for their product characteristics and environmental compatibility based on the European Standards (EN 12915-1:2009) for materials intended for water treatment (i.e. ash content, water leachable polycyclic aromatic hydrocarbons (PAHs) and elements), as well as for specific surface area (SSA), using them as response variables of a multivariate partial least square multiple regression, whose results provided interesting insights on the relationships between pyrolysis conditions and biochar characteristics. Biochars produced with sludge and/or providing the highest SSA values (258-370 m2 g-1) were selected to undergo a sustainable chemical treatment using a by-product of the gasification of woody biomass, complying in all cases with European Standards and achieving therefore the end-of-waste status for sewage sludge. The biochar deriving from the highest percentage of sludge (30% by weight) and with the highest SSA (390 m2 g-1) was thermally activated achieving SSA of 460 m2 g-1 and then tested for the sorption of direct yellow 50 and methylene blue in ultrapure water and real wastewater, compared to a commercial activated carbon (AC). The biochar showed Langmuir sorption maxima (Qm) 2-9 times lower than AC, thus highlighting promising sorption performances. Qm for methylene blue in wastewater (28 mg‧g-1) was confirmed by column breakthrough experiments.

Innovative thermally assisted on-line solid phase extraction-reversed phase liquid chromatography applied to targeted nutrimetabolomics in human biofluids.

In this study, the use of thermal desorption in on-line solid phase extraction coupled with reversed phase liquid chromatography (on-line SPE-LC) was for the first time proposed and demonstrated for the desorption of analytes strongly retained by multiple interaction polymeric sorbents. In detail, this analytical strategy was applied to the on-line SPE-LC targeted analysis of a model set of 34 human gut metabolites characterized by heterogeneous physicochemical properties (i.e., octanol-water partition coefficient in the range -0.3 - 3.4). The novel thermally assisted on-line SPE approach was investigated in comparison to conventional room temperature desorption strategies based on the use of (i) an optimized elution gradient or (ii) organic desorption followed by post-cartridge dilution. The thermally assisted desorption strategy has been shown to be better performing and suitable for the development of a reliable and sensitive method for the analysis of the model group of analytes in urine and serum. In more detail, under the optimized experimental conditions, the proposed method provided negligible matrix effects in both biofluids for almost all target analytes. Moreover, method quantification limits were in the ranges 0.026-7.2 µg L-1 and 0.033-23 µg L-1 for urine and serum, respectively, i.e., comparable to or lower than those reported in methods previously published.

Colorimetric selective quantification of anthocyanins with catechol/pyrogallol moiety in edible plants upon zinc complexation.

Here is examined the colour development from common anthocyanins (i.e., cyanidin, delphinidin, malvidin, and pelargonidin glycosides) and from anthocyanins-rich extracts (i.e., bilberries, strawberries, and raspberries), using zinc-anthocyanin complexes as molecular probe. We have observed the absorbance increase in the blue region in presence of large excess of zinc ion at acidic pH for cyanidin and delphinidin derivatives, likely due to quinoidal base stabilization from catechol and pyrogallol moiety. The assay condition were studied and applied to natural extracts containing these compounds. The same behaviour was observed for bilberry and, to a minor extent, for raspberry extracts, due to the larger cyanidin/delphinidin contents in the former than in the latter. Anthocyanin standard UV-Vis analysis in buffer has shown a very good linear correlation for cyanidin and delphinidin (R2 = 0.995 and 0.997, respectively), good precision (CV% = 7.4% and 5.3% respectively), high sensitivity (Cyε600nm = 8300 M-1 cm-1, LOD = 0.264 ± 0.005 mg L-1, LOQ = 0.478 ± 0.007 mg L-1, and Dpε600nm = 15,900 M-1 cm-1, LOD = 0.143 ± 0.002 mg L-1, LOQ = 0.478 ± 0.007 mg L-1). The effectiveness of this colorimetric method for the selective quantification of catechol/pyrogallol-based anthocyanins has been demonstrated in the aforementioned complex real matrices and compared to LC-MS/MS analysis and pH-differential method, offering a valuable tool to characterize plant and food extracts particularly rich in zinc-coordinating anthocyanins.

Development of a comprehensive two-dimensional liquid chromatographic mass spectrometric method for the non-targeted identification of poly- and perfluoroalkyl substances in aqueous film-forming foams.

In this research, we developed an online comprehensive two-dimensional liquid chromatographic (LC × LC) method hyphenated with high-resolution mass spectrometry (HRMS) for the non-targeted identification of poly- and perfluorinated compounds (PFASs) in fire-fighting aqueous-film forming foams (AFFFs). The method exploited the combination of mixed-mode weak anion exchange-reversed phase with a octadecyl stationary phase, separating PFASs according to ionic classes and chain length. To develop and optimize the LC × LC method we used a reference training set of twenty-four anionic PFASs, representing the main classes of compounds occurring in AFFFs and covering a wide range of physicochemical properties. In particular, we investigated different modulation approaches to reduce injection band broadening and breakthrough in the second dimension separation. Active solvent and stationary phase assisted modulations were compared, with the best results obtained with the last approach. In the optimal conditions, the predicted peak capacity corrected for undersampling was higher than three-hundred in a separation space of about 60 min. Subsequently, the developed method was applied to the non-targeted analysis of two AFFF samples for the identification of homologous series of PFASs, in which it was possible to identify up to thirty-nine potential compounds of interest utilizing Kendrick mass defect analysis. Even within the samples, the features considered potential PFAS by mass defect analysis elute in the chromatographic regions discriminating for the ionic group and/or the chain length, thus confirming the applicability of the method presented for the analysis of AFFF mixtures and, to a further extent, of environmental matrices affected by the AFFF.

Combining Feature-Based Molecular Networking and Contextual Mass Spectral Libraries to Decipher Nutrimetabolomics Profiles.

Untargeted metabolomics approaches deal with complex data hindering structural information for the comprehensive analysis of unknown metabolite features. We investigated the metabolite discovery capacity and the possible extension of the annotation coverage of the Feature-Based Molecular Networking (FBMN) approach by adding two novel nutritionally-relevant (contextual) mass spectral libraries to the existing public ones, as compared to widely-used open-source annotation protocols. Two contextual mass spectral libraries in positive and negative ionization mode of ~300 reference molecules relevant for plant-based nutrikinetic studies were created and made publicly available through the GNPS platform. The postprandial urinary metabolome analysis within the intervention of Vaccinium supplements was selected as a case study. Following the FBMN approach in combination with the added contextual mass spectral libraries, 67 berry-related and human endogenous metabolites were annotated, achieving a structural annotation coverage comparable to or higher than existing non-commercial annotation workflows. To further exploit the quantitative data obtained within the FBMN environment, the postprandial behavior of the annotated metabolites was analyzed with Pearson product-moment correlation. This simple chemometric tool linked several molecular families with phase II and phase I metabolism. The proposed approach is a powerful strategy to employ in longitudinal studies since it reduces the unknown chemical space by boosting the annotation power to characterize biochemically relevant metabolites in human biofluids.

Quality by Design in optimizing the extraction of (poly)phenolic compounds from Vaccinium myrtillus berries.

Quality by Design was adopted for developing an effective extraction procedure of (poly)phenolic compounds from bilberry (Vaccinium myrtillus L.) fruits, using a pooled sample of berries from different regions of Ukraine. Mechanical solvent extraction, microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were investigated by screening matrices. Extraction time (Time, from 5 to 15 min), organic solvent type (OS type, methanol, ethanol and acetone), organic solvent percentage (OS%, from 50% to 90%), sample/extractant ratio (S/E ratio, from 0.025 to 0.1 g mL-1), and, only for MAE, extraction temperature (T, from 30 to 60°C), were selected as critical method parameters (CMPs). The spectrophotometric assays total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and radical scavenging activity (evaluated by the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH), the 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid), and the ferric reducing antioxidant power methods) were chosen as critical method attributes (CMAs). The screening procedure allowed for selecting UAE and methanol, while the other CMPs underwent further optimization through Response Surface Methodology. Target values for TSP, TMA and DPPH were selected and the method operable design region (MODR) was defined by means of Monte-Carlo simulations. The optimized conditions, with the corresponding MODR intervals in bracket, were the following: (i) Time, 17 min (15-23 min); OS%, 56% (44-59%); S/E ratio, 0.030 (0.022-0.034) g mL-1. Under these experimental conditions, CMAs values of the pooled sample were the following (n = 3): TSP=4433±176 mg (+)-catechin eq/100 g dry weight (d.w.); TMA=3575±194 mg cyanidin-3-glucoside eq/100 g d.w.; DPPH=273±5 µg DPPH inhib./mg d.w. The optimized extraction method was tested for matrix effect (ME%) in the UHPLC-MS/MS analysis of 15 anthocyanins and 20 non-anthocyanins individual (poly)phenols commonly found in bilberries, as well as for luteolin, sinapic acid, and pelargonidin-3-glucoside, absent in this fruit and therefore added to the extracts as surrogate standards for evaluating apparent recovery (AR%). |ME%| was in any case ≤ 23% and AR% of the surrogate standards in the range 91-95%, confirming the very good performances of the optimized extraction method.

Analytical quality by design in the development of a solvent-modified micellar electrokinetic chromatography method for the determination of sitagliptin and its related compounds.

A solvent-modified micellar electrokinetic chromatography method was developed following the Quality by Design approach for the simultaneous determination of sitagliptin (SIT), an oral antihyperglycemic drug, and its main impurities derived from the synthesis process. The separation system was identified in the scouting phase and was made by sodium dodecyl sulphate (SDS) micelles with the addition of n-butanol and methanol. The knowledge space was investigated through an asymmetric screening matrix, taking into consideration eight critical method parameters (CMPs) involving the composition of the background electrolyte in terms of buffer concentration and pH, the concentration of surfactants and organic modifiers, and voltage. The critical method attributes (CMAs) were identified as analysis time and the distance between the tail of the electroosmotic flow system peak and the front edge of impurity I1 (sitagliptin triazole hydrochloride). A Box-Behnken Design was used in response surface methodology for calculating the quadratic models relating the CMPs to the CMAs. From the models it was possible to compute the method operable design region (MODR) through Monte-Carlo simulations. The MODR was identified in the probability maps as the multidimensional zone where the risk of failure to achieve the desired values for the CMAs was lower than 10 %. The experimental conditions corresponding to the working point, with the MODR interval, were the following: background electrolyte, 14 (10-18) mM borate buffer pH 9.20, 100 mM SDS, 13.6 (11.1-16.0) %v/v n-butanol, 6.7 (4.5-8.8) %v/v methanol; voltage and temperature were set to 28 kV and 22 °C, respectively. The developed CE method was validated in accordance with International Council for Harmonisation guidelines and was applied to the analysis of SIT tablets. The routine analysis for the quality control of the pharmaceutical product could be conducted in about 11 min.

Liquid Chromatographic Quadrupole Time-of-Flight Mass Spectrometric Untargeted Profiling of (Poly)phenolic Compounds in Rubus idaeus L. and Rubus occidentalis L. Fruits and Their Comparative Evaluation.

This study provided a detailed profiling of the antioxidant and bioactive compounds occurring in three varieties of Rubus idaeus L. fruits ("Fall Gold", "Glen Ample" and "Tulameen") compared to Rubus occidentalis L. black raspberry ("Jewel" cultivar), adopting a comprehensive untargeted metabolomics approach developed with UHPLC analysis coupled with quadrupole/time-of-flight high resolution mass spectrometry, using the SWATH® acquisition protocol. The feature selection and annotation workflow, applied to the analysis of raspberry extracts in both polarities, allowed identifying 68 bioactive compounds mainly belonging to the classes of (poly)phenolic compounds. Interestingly, some of these identifications (e.g., ferulic acid glycosides and the ellagitannin-like nobotanin/malabathrin) represent the first report in raspberry fruits. Principal component analysis made possible highlighting the features more related to the expression of a genotype effect within the R. idaeus species or between the two raspberry species herein investigated. Overall, flavanols were the most discriminating features for the Fall Gold variety, whereas ellagitannins and flavonol glycosides represent more distinctive metabolic traits in Glen Ample and Tulameen fruits. Moreover, R. occidentalis Jewel variety was strongly characterized by the occurrence of anthocyanins, such as cyanidin, pelargonidin and delphinidin glycosides.

Quality by design optimization of a liquid chromatographic-tandem mass spectrometric method for the simultaneous analysis of structurally heterogeneous pharmaceutical compounds and its application to the rapid screening in wastewater and surface water samples by large volume direct injection.

This study focused on the Analytical Quality by Design (AQbD) optimization of the chromatographic separation and mass spectrometric detection of a wide group of structurally heterogeneous model pharmaceutical compounds (PhCs) and transformation products (TPs), chosen to cover the challenging issues of the co-presence of compounds characterized by (i) a wide range of physicochemical properties, (ii) the same mass transitions, and (iii) different ionisation modes. Italian consumption of PhCs were also considered as election criteria of target analytes. Octadecyl and pentafluorophenyl stationary phases, acetonitrile/methanol ratios and acidity of the eluents, column temperature, initial organic phase percentage, and elution gradient were investigated by AQbD, aiming at optimizing critical resolutions, sensitivities, and analysis time. Statistically significant models were obtained in most cases with fitting and cross-validation coefficients in the ranges of 0.681-0.998 and 0.514-0.967, respectively. After optimization, the analysis of target analytes was performed in a single chromatographic run, adopting a mixed acquisition mode based on scheduled acquisition windows comprising both single polarity and continuous polarity switching. For most investigated analytes the method provided detection limits in the sub-ng/L to low ng/L range, meeting for macrolides the sensitivity requested by the "Watch List" 2018/840/EU. The optimized method was applied to the direct injection analysis of PhCs and TPs in four wastewater treatment plant (WWTP) effluents and surface water (SW) samples collected in the receiving water bodies. Absolute values of matrix effect were found to be far higher than 20% for most target analytes in most samples. Seventeen PhCs and two TPs were quantified in at least one sample, at the wide concentration range of about 1-3200 ng/L. The most occurring PhCs in both WWTP effluents and SWs were levofloxacin (202-1239 and 100-830 ng/L), furosemide (865-3234 and 230-880 ng/L), ketoprofen (295-1104 and 270-490 ng/L), and ibuprofen (886-3232 and 690-1440 ng/L).

Improving the efficiency of wastewater treatment plants: Bio-removal of heavy-metals and pharmaceuticals by Azolla filiculoides and Lemna minuta.

In this study, we investigated the removal of Fe(III), Cr(VI), Al(III), diclofenac, and levofloxacin from treated wastewater in the presence of the free-floating plants Azolla filiculoides and Lemna minuta, to understand whether these species can be effectively used in a surface flow constructed wetland as wastewater refining treatment. Fe and Al were selected owing to their wide use as coagulant agents in wastewater treatment plants for promoting clariflocculation processes, whilst Cr was chosen due to its common use in industry. Diclofenac and levofloxacin, two molecules belonging to the most widely used pharmaceutical classes in the world, were studied as representative anti-inflammatory drugs and antibiotics, respectively. The study was performed at laboratory scale, exposing the plants separately to each individual contaminant at the concentrations of 5 mg L-1 for the metals (i.e. 2.5-5 times higher than the European limits concerning discharge into surface water), and 1 µg L-1 for the pharmaceuticals (concentration levels commonly found in wastewater). Depending on the plant species and contaminant tested, the range of different effects observed included low toxicity (i.e. Cr, Fe and diclofenac in L. minuta) and even a stimulatory effect on plant growth (i.e. for A. filiculoides with Al and for L. minuta with Al and levofloxacin). Moreover, both species proved to be very effective in the removal of Fe, Al and levofloxacin, with A. filiculoides showing the best performance (removal efficiency of 92%, 96%, and 60%, respectively), whereas for Cr and diclofenac the removal was always less than 10%. The higher removal capacity of A. filiculoides compared to L. minuta can be attributed to its superior tolerance of the contaminants, probably in turn related to the presence of nitrogen-fixing microorganism in its fronds.

Optimization and validation of a method based on QuEChERS extraction and liquid chromatographic-tandem mass spectrometric analysis for the determination of perfluoroalkyl acids in strawberry and olive fruits, as model crops with different matrix characteristics.

A QuEChERS method was optimized and validated for the LC-MS/MS analysis of perfluoro-n-pentanoic acid (PFPeA), perfluoro-1-butanesulfonic acid (PFBuS), perfluoro-n-hexanoic acid (PFHxA), perfluoro-n-heptanoic acid (PFHpA), perfluoro-1-hexanesulfonic acid (PFHxS), perfluoro-n-octanoic acid (PFOA), perfluoro-n-nonanoic acid (PFNA), perfluoro-1-octanesulfonic acid (PFOS) and perfluoro-n-decanoic acid (PFDA) in freeze-dried strawberry and olive, as model fruits characterized by very different chemical compositions. The method was evaluated for apparent recovery, intra-day and inter-day precision, matrix effect and recovery. The method optimized for strawberry provided for most compounds absolute values of matrix effect (|ME%|) ≤ 11%, except for PFHxA, which showed a signal suppression of 22%. The extraction efficiency was tested at the spike levels 500-5000 pg/g d.w. for PFPeA, PFBuS, and PFHxA, and 100-1000 pg/g d.w. for the other target analytes, evidencing as a whole recoveries in the range of 65-89%. For olive fruits, due to their high fat content, an ultrasound-assisted extraction was necessary to obtain an efficient sample disgregation so as to increase the extraction yield and its precision. Moreover, a d-SPE clean-up with GCB allowed to achieve |ME%| ≤ 8% (except for PFBuS, which showed a signal enhancement of 19%) and recoveries calculated at the aforementioned spike levels were in the range 75-97%. The two methods provided very good linearity (R2 ≥ 0.9984) from 10,000 pg/g down to compound specific quantification limits, which were included in the ranges of 2.9-393 pg/g and 2.6-127 pg/g for strawberry and olive fruit, respectively. The methods were applied to the analysis of PFAAs in strawberry and olive fruits commercially available in two Italian supermarkets, as well as obtained under irrigation with various treated wastewaters (TWWs), evidencing in both cases a higher PFAAs occurrence in olives than in strawberry. However, PFAAs concentrations determined in the investigated fruit matrixes were quite low, being their sum 1.9 ng/g d.w. in the worst case (i.e. olive fruits grown under irrigation with TWWs).

Removal efficiency and mass balance of polycyclic aromatic hydrocarbons, phthalates, ethoxylated alkylphenols and alkylphenols in a mixed textile-domestic wastewater treatment plant.

In this work the occurrence and fate of polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), mono and diethoxylate alkylphenols (AP1-2EOs) and alkylphenols (APs) have been investigated during a two-weeks period in a facility treating mixed textile-domestic wastewater (Prato, Italy). The wastewater treatment plant (WWTP) consists of primary sedimentation, activated sludge biological oxidation, secondary sedimentation, clariflocculation and ozonation. The sludge is treated within the facility by thickening, dewatering and final incineration, thus providing the almost quantitative removal of the adsorbed micropollutants. Naphthalene (50%), di(2-ethylhexyl) phthalate (74%) and branched 4-nonylphenols (59%) were the individual main representative compounds of each class in the influent wastewater, which showed concentration ranges of 5.6-66, 85-290 and 21-133µg/L for PAHs, PAEs and APs+AP1-2EOs, respectively. The WWTP efficiently removed PAHs, PAEs and APs+AP1-2EOs, providing effluent concentrations of 0.075-0.16ng/L 0.38-9.9µg/L and 0.53-1.4µg/L. All targeted priority and priority-hazardous micropollutants showed effluent concentrations in line with the European environmental quality standards (EQS), even though for di(2-ethylhexyl) phthalate and benzo(a)pyrene after correction for the dilution factor of the recipient. The WWTP performance was evaluated by mass balance, verifying its accuracy by monitoring Pb and Cd as conservative species. The biological treatment sections provided mass losses of 85.5%, 74.5% and 56.8% for APs+AP1-2EOs, PAEs and PAHs, highlighting efficient biotransformation performances of the activated sludge process. However, for the more volatile PAHs (e.g. naphthalene), a significant contribution of stripping cannot be excluded. A remarkable mass loss was also determined in the ozonation stage for PAEs (72.9%) and especially PAHs (97.0%), whereas a lower efficiency was observed for APs+AP1-2EOs (41.3%). The whole plant allowed for obtaining an almost quantitative removal (96.7-98.4%) for all targeted compounds.