RESUMO
Snake venom is produced, transported and delivered by the sophisticated venom delivery system (VDS). When snakes bite, the venom travels from the venom gland through the venom duct into needle-like fangs that inject it into their prey. To counteract breakages, fangs are continuously replaced throughout life. Currently, the anatomy of the connection between the duct and the fang has not been described, and the mechanism by which the duct is reconnected to the replacement fang has not been identified. We examined the VDS in 3D in representative species from two families and one subfamily (Elapidae, Viperidae, Atractaspidinae) using contrast-enhanced microCT (diceCT), followed by dissection and histology. We observed that the venom duct bifurcates immediately anterior to the fangs so that both the original and replacement fangs are separately connected and functional in delivering venom. When a fang is absent, the canal leading to the empty position is temporarily closed. We found that elapid snakes have a crescent-shaped venom reservoir where venom likely pools before it enters the fang. These findings form the final piece of the puzzle of VDS anatomy in front-fanged venomous snakes. Additionally, they provide further evidence for independent evolution of the VDS in these three snake taxa.
Assuntos
Dente , Viperidae , Animais , Humanos , Venenos de Serpentes , Serpentes/anatomia & histologia , Dente/anatomia & histologiaRESUMO
BACKGROUND: A major goal of evolutionary developmental biology is to discover general models and mechanisms that create the phenotypes of organisms. However, universal models of such fundamental growth and form are rare, presumably due to the limited number of physical laws and biological processes that influence growth. One such model is the logarithmic spiral, which has been purported to explain the growth of biological structures such as teeth, claws, horns, and beaks. However, the logarithmic spiral only describes the path of the structure through space, and cannot generate these shapes. RESULTS: Here we show a new universal model based on a power law between the radius of the structure and its length, which generates a shape called a 'power cone'. We describe the underlying 'power cascade' model that explains the extreme diversity of tooth shapes in vertebrates, including humans, mammoths, sabre-toothed cats, tyrannosaurs and giant megalodon sharks. This model can be used to predict the age of mammals with ever-growing teeth, including elephants and rodents. We view this as the third general model of tooth development, along with the patterning cascade model for cusp number and spacing, and the inhibitory cascade model that predicts relative tooth size. Beyond the dentition, this new model also describes the growth of claws, horns, antlers and beaks of vertebrates, as well as the fangs and shells of invertebrates, and thorns and prickles of plants. CONCLUSIONS: The power cone is generated when the radial power growth rate is unequal to the length power growth rate. The power cascade model operates independently of the logarithmic spiral and is present throughout diverse biological systems. The power cascade provides a mechanistic basis for the generation of these pointed structures across the tree of life.
Assuntos
Exoesqueleto/crescimento & desenvolvimento , Bico/crescimento & desenvolvimento , Casco e Garras/crescimento & desenvolvimento , Cornos/crescimento & desenvolvimento , Componentes Aéreos da Planta/crescimento & desenvolvimento , Dente/crescimento & desenvolvimento , Animais , Invertebrados/crescimento & desenvolvimento , Modelos Biológicos , Desenvolvimento Vegetal , Vertebrados/crescimento & desenvolvimentoRESUMO
Joint mobility is a key factor in determining the functional capacity of tetrapod limbs, and is important in palaeobiological reconstructions of extinct animals. Recent advances have been made in quantifying osteological joint mobility using virtual computational methods; however, these approaches generally focus on the proximal limb joints and have seldom been applied to fossil mammals. Palorchestes azael is an enigmatic, extinct ~1000 kg marsupial with no close living relatives, whose functional ecology within Australian Pleistocene environments is poorly understood. Most intriguing is its flattened elbow morphology, which has long been assumed to indicate very low mobility at this important joint. Here, we tested elbow mobility via virtual range of motion (ROM) mapping and helical axis analysis, to quantitatively explore the limits of Palorchestes' elbow movement and compare this with their living and extinct relatives, as well as extant mammals that may represent functional analogues. We find that Palorchestes had the lowest elbow mobility among mammals sampled, even when afforded joint translations in addition to rotational degrees of freedom. This indicates that Palorchestes was limited to crouched forelimb postures, something highly unusual for mammals of this size. Coupled flexion and abduction created a skewed primary axis of movement at the elbow, suggesting an abducted forelimb posture and humeral rotation gait that is not found among marsupials and unlike that seen in any large mammals alive today. This work introduces new quantitative methods and demonstrates the utility of comparative ROM mapping approaches, highlighting that Palorchestes' forelimb function was unlike its contemporaneous relatives and appears to lack clear functional analogues among living mammals.
Assuntos
Articulação do Cotovelo/fisiologia , Membro Anterior/fisiologia , Úmero/fisiologia , Postura/fisiologia , Amplitude de Movimento Articular/fisiologia , Animais , Austrália , Fenômenos Biomecânicos/fisiologia , Articulação do Cotovelo/anatomia & histologia , Membro Anterior/anatomia & histologia , Fósseis , Úmero/anatomia & histologia , Marsupiais , MovimentoRESUMO
Although Liverpool Heart and Chest Hospital Trust has been rated top in the country for "overall care", we were aware that improvements could be made. We included staff in designing a patient experience vision to help them prioritise the needs of patients and their families in everything they do. Both staff and patients reported that the vision improved patient experience and it became an integral part of trust culture. This article describes the development and implementation of the vision.
Assuntos
Modelos Organizacionais , Pacientes/psicologia , Medicina Estatal/organização & administração , Humanos , Medicina Estatal/normas , Reino UnidoRESUMO
Modern pinnipeds (true and eared seals) employ two radically different swimming styles, with true seals (phocids) propelling themselves primarily with their hindlimbs, whereas eared seals (otariids) rely on their wing-like foreflippers.1,2 Current explanations of this functional dichotomy invoke either pinniped diphyly3-5 or independent colonizations of the ocean by related but still largely terrestrial ancestors.6-8 Here, we show that pinniped swimming styles form an anatomical, functional, and behavioral continuum, within which adaptations for forelimb swimming can arise directly from a hindlimb-propelled bauplan. Within phocids, southern seals (monachines) show a convergent trend toward wing-like, hydrodynamically efficient forelimbs used for propulsion during slow swimming, turning, bursts of speed, or when initiating movement. This condition is most evident in leopard seals, which have well-integrated foreflippers with little digit mobility, reduced claws, and hydrodynamic characteristics comparable to those of forelimb-propelled otariids. Using monachines as a model, we suggest that the last common ancestor of modern seals may have been hindlimb-propelled and aquatically adapted, thus resolving the apparent contradiction at the root of pinniped evolution.
Assuntos
Caniformia , Otárias , Focas Verdadeiras , Natação , Animais , Membro AnteriorRESUMO
The Palorchestidae are a family of marsupial megafauna occurring across the eastern Australian continent from the late Oligocene through to their extinction in the Late Pleistocene. The group is known for their odd 'tapir-like' crania and distinctive clawed forelimbs, but their appendicular anatomy has never been formally described. We provide the first descriptions of the appendicular skeleton and body mass estimates for three palorchestid species, presenting newly-identified, and in some cases associated, material of mid-Miocene Propalorchestes, Plio-Pleistocene Palorchestes parvus and Pleistocene Palorchestes azael alongside detailed comparisons with extant and fossil vombatiform marsupials. We propose postcranial diagnostic characters at the family, genus and species level. Specialisation in the palorchestid appendicular skeleton evidently occurred much later than in the cranium and instead correlates with increasing body size within the lineage. We conclude that palorchestid forelimbs were highly specialised for the manipulation of their environment in the acquisition of browse, and that they may have adopted bipedal postures to feed. Our results indicate palorchestids were bigger than previously thought, with the largest species likely weighing over 1000 kg. Additionally, we show that P. azael exhibits some of the most unusual forelimb morphology of any mammal, with a uniquely fixed humeroulnar joint unlike any of their marsupial kin, living or extinct.
Assuntos
Marsupiais/anatomia & histologia , Animais , Austrália , Tamanho Corporal , Osso e Ossos/anatomia & histologia , Extinção Biológica , Extremidades/anatomia & histologia , Fósseis/anatomia & histologia , Marsupiais/classificação , Marsupiais/fisiologia , Crânio/anatomia & histologia , Especificidade da EspécieRESUMO
This study explores how curvature in the quokka femur may help to reduce bending strain during locomotion. The quokka is a small wallaby, but the curvature of the femur and the muscles active during stance phase are similar to most quadrupedal mammals. Our hypothesis is that the action of hip extensor and ankle plantarflexor muscles during stance phase place cranial bending strains that act to reduce the caudal curvature of the femur. Knee extensors and biarticular muscles that span the femur longitudinally create caudal bending strains in the caudally curved (concave caudal side) bone. These opposing strains can balance each other and result in less strain on the bone. We test this idea by comparing the performance of a normally curved finite element model of the quokka femur to a digitally straightened version of the same bone. The normally curved model is indeed less strained than the straightened version. To further examine the relationship between curvature and the strains in the femoral models, we also tested an extra-curved and a reverse-curved version with the same loads. There appears to be a linear relationship between the curvature and the strains experienced by the models. These results demonstrate that longitudinal curvature in bones may be a manipulable mechanism whereby bone can induce a strain gradient to oppose strains induced by habitual loading.
RESUMO
It has recently been proposed that the caudal curvature (concave caudal side) observed in the radioulna of terrestrial quadrupeds is an adaptation to the habitual action of the triceps muscle which causes cranial bending strains (compression on cranial side). The caudal curvature is proposed to be adaptive because longitudinal loading induces caudal bending strains (increased compression on the caudal side), and these opposing bending strains counteract each other leaving the radioulna less strained. If this is true for terrestrial quadrupeds, where triceps is required for habitual elbow extension, then we might expect that in arboreal species, where brachialis is habitually required to maintain elbow flexion, the radioulna should instead be cranially curved. This study measures sagittal curvature of the ulna in a range of terrestrial and arboreal primates and marsupials, and finds that their ulnae are curved in opposite directions in these two locomotor categories. This study also examines sagittal curvature in the humerus in the same species, and finds differences that can be attributed to similar adaptations: the bone is curved to counter the habitual muscle action required by the animal's lifestyle, the difference being mainly in the distal part of the humerus, where arboreal animals tend have a cranial concavity, thought to be in response the carpal and digital muscles that pull cranially on the distal humerus.
RESUMO
Long bone curvature in animal limbs has long been a subject of interest and much work has explored why long bones should be curved. However, the 'when' and 'how' of curvature development is poorly understood. It has been shown that the rat tibia fails to attain its normal curvature if the action of muscles is removed early in life, but it is not clear if this is because the curvature fails to develop or if the bone becomes straighter without the action of muscles. No studies have examined the development of bone curvature in a normally developing quadruped, so this study tracks the course of curvature formation in the radioulna in a series of growing pigs. We also histologically examined the epiphyseal growth plates of these bones to determine if they contribute to the formation of curvature. In all three epiphyseal plates examined, the proliferative zone is thicker and more densely populated with chondrocytes on the cranial (convex) side than the caudal (concave) side. Frost's chondral modelling theory would suggest that the cranial side of the bone is under more compression than the caudal side, and we conclude that this is due to the action of triceps extending the elbow by pulling on the olecranon process. These results support the idea that bone curvature is an adaptation to habitual loading, where longitudinal loads acting on the curved bone cause bending strains that counter the bending resulting from the habitual muscle action.
RESUMO
Many fungal cell adhesion proteins form functional amyloid patches on the surface of adhering cells. The Candida albicans Agglutinin-like sequence (Als) adhesins are exemplars for this phenomenon, and have amyloid forming sequences that are conserved between family members. The Als5p amyloid sequence mediates amyloid fibril formation and is critical for cell adhesion and biofilm formation, and is also present in the related adhesins Als1p and Als3p. We have developed a fluorescent peptide probe containing the conserved Als amyloid-forming sequence. This peptide bound specifically to yeast expressing Als5p, but not to cells lacking the adhesin. The probe bound to both yeast and hyphal forms of C. albicans. Δals1/Δals3 single and double deletion strains exhibited reduced fluorescence, indicating that probe binding required expression of these proteins. Additionally, the Als peptide specifically stained fungal cells in abscesses in autopsy sections. Counterstaining with calcofluor white showed colocalization with the amyloid peptide. In addition, fungi in autopsy sections derived from the gastrointestinal tract showed colocalization of the amyloid-specific dye thioflavin T and the fluorescent peptide. Collectively, our data demonstrate that we can exploit amyloid sequence specificity for detection of functional amyloids in situ.