RESUMO
Levosimendan's calcium sensitizing effects in heart muscle cells are well established; yet, its potential impact on skeletal muscle cells has not been evidently determined. Despite controversial results, levosimendan is still expected to interact with skeletal muscle through off-target sites (further than troponin C). Adding to this debate, we investigated levosimendan's acute impact on fast-twitch skeletal muscle biomechanics in a length-dependent activation study by submersing single muscle fibres in a levosimendan-supplemented solution. We employed our MyoRobot technology to investigate the calcium sensitivity of skinned single muscle fibres alongside their stress-strain response in the presence or absence of levosimendan (100 µM). While control data are in agreement with the theory of length-dependent activation, levosimendan appears to shift the onset of the 'descending limb' of active force generation to longer sarcomere lengths without notably improving myofibrillar calcium sensitivity. Passive stretches in the presence of levosimendan yielded over twice the amount of enlarged restoration stress and Young's modulus in comparison to control single fibres. Both effects have not been described before and may point towards potential off-target sites of levosimendan.
Assuntos
Cálcio , Fibras Musculares de Contração Rápida , Simendana , Simendana/farmacologia , Animais , Camundongos , Cálcio/metabolismo , Fibras Musculares de Contração Rápida/efeitos dos fármacos , Fibras Musculares de Contração Rápida/metabolismo , Contração Muscular/efeitos dos fármacos , Sarcômeros/metabolismo , Sarcômeros/efeitos dos fármacos , Masculino , Miofibrilas/metabolismo , Miofibrilas/efeitos dos fármacosRESUMO
Duchenne muscular dystrophy (DMD) is a degenerative genetic myopathy characterized by complete absence of dystrophin. Although the mdx mouse lacks dystrophin, its phenotype is milder compared to DMD patients. The incorporation of a null mutation in the Cmah gene led to a more DMD-like phenotype (i.e., more fibrosis). Although fibrosis is thought to be the major determinant of 'structural weakness', intracellular remodeling of myofibrillar geometry was shown to be a major cellular determinant thereof. To dissect the respective contribution to muscle weakness, we assessed biomechanics and extra- and intracellular architecture of whole muscle and single fibers from extensor digitorum longus (EDL) and diaphragm. Despite increased collagen contents in both muscles, passive stiffness in mdx Cmah-/- diaphragm was similar to wt mice (EDL muscles were twice as stiff). Isometric twitch and tetanic stresses were 50% reduced in mdx Cmah-/- diaphragm (15% in EDL). Myofibrillar architecture was severely compromised in mdx Cmah-/- single fibers of both muscle types, but more pronounced in diaphragm. Our results show that the mdx Cmah-/- genotype reproduces DMD-like fibrosis but is not associated with changes in passive visco-elastic muscle stiffness. Furthermore, detriments in active isometric force are compatible with the pronounced myofibrillar disarray of the dystrophic background.
Assuntos
Distrofina , Distrofia Muscular de Duchenne , Animais , Colágeno/metabolismo , Diafragma/metabolismo , Modelos Animais de Doenças , Distrofina/genética , Distrofina/metabolismo , Fibrose , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Endogâmicos mdx , Debilidade Muscular/patologia , Músculo Esquelético/metabolismo , Distrofia Muscular de Duchenne/metabolismoRESUMO
Functional imaging of the intracellular calcium concentration [Ca2+]i using fluorescent indicators is a powerful and frequently applied method for assessing various biological questions in vitro, including ion channel function and intracellular signaling in homeostasis and disease. In functional [Ca2+]i imaging experiments, the fluorescence intensity of single cells is typically recorded during application of a chemical stimulus, i.e. by exchange of modified extracellular media, exposure to drugs and/or ligands. The concomitant mechanical perturbation caused by the perfusion of different solution during experimentation severely hinders calcium imaging in non-adherent cells, including peripheral immune cells, as cells in suspension are dislocated by turbulent flow during chemical stimulation. The quantitative analysis, involving time-courses of intracellular fluorescence signal changes, necessitates cells to remain at the same position throughout the experiment. To prevent dislocation of cells during solution exchange, and to enable imaging as well as analysis of Ca2+ responses in immune cells, a gelatin-based method for immobilization of non-adherent cells was developed. Gelatin has been a long-serving material for cell immobilization, e.g. in 3D bio-printing of cells and has thus, also been employed in the context of this study. To demonstrate the applicability of the established method for functional Ca2+ imaging in gelatin-immobilized suspension cells, a proof-of-concept study was conducted using human peripheral blood model cell lines (Jurkat/T-lymphocytes and THP-1/monocytes), Ca2+ indicators (Fluo-4 and Fura-2) and two different fluorescence microscopy rigs. The data presented that the established methodology is applicable for studying Ca2+ signaling by in vitro high-content functional imaging of [Ca2+]i in suspension cells, including but not restricted to human immune cells.
Assuntos
Sinalização do Cálcio/fisiologia , Cálcio/metabolismo , Citoplasma/metabolismo , Gelatina/metabolismo , Linhagem Celular , Fluorescência , Corantes Fluorescentes/metabolismo , Humanos , Microscopia de Fluorescência/métodosRESUMO
Patients with aggressive cancer, e.g., gastrointestinal cancer, are prone (≥50% chance) to developing cancer cachexia (CC). Little is known about the effects of CC on the biomechanical function of muscle. A promising prevention strategy was found in the form of a multi-modal therapy combining mild resistance exercise (e.g., whole-body electro-myostimulation, WB-EMS) and a protein-rich diet. In a previous study of ours, this was effective in counteracting the loss of muscle mass, yet a systematic and comprehensive assessment of active and passive single muscle fibre functions was so far absent. This pilot study investigated the biomechanical function of single muscle fibres (rectus abdominis) from the biopsies of conventionally treated (pre-)cachectic cancer ((pre-)CC) patients (m = 9), those receiving the multi-modal therapy comprising WB-EMS training and protein-rich nutrition (m = 3), and a control group (m = 5). Our findings not only align with previous findings showing the absolute force loss in CC that is accelerated by atrophy but also speak in favour of a different, potentially energy- and Ca2+-homeostasis-related effect that compromises muscle contraction (F ~0.9 mN vs. F ~0.6 mN in control patients). However, myofibrillar Ca2+ sensitivity and the quality of contraction were unaltered (pCa50: 5.6-5.8). Single fibres from the (pre-)CC patients receiving WB-EMS training and protein supplementation were significantly more compliant (p < 0.001 at ≥130% of resting length L0). Those fibres displayed a similar softness to the ones from the control patients (axial compliance ~15 m/N at ≥130% L0), while single fibres from the patients with (developing) cachexia were significantly stiffer (axial compliance ~7 m/N, p < 0.001 at ≥130% L0). Adjuvant multi-modal therapy (WB-EMS training and nutritional support) contributes to maintaining the axial compliance of single fibres and potentially improves the quality of life for patients at risk of developing CC.
RESUMO
The CAS3D image processing method intuitively applies a combination of Fourier space and real space 3D analysis algorithms to volumetric images of single skeletal muscle fiber Myosin II Second Harmonic Generation (SHG) XYZ image data. Our developed tool automatically quantifies the myofibrillar orientation in muscle samples by determining the cosine angle sum of intensity gradients in 3D (CAS3D) while determining the mean sarcomere length (SL) and sample orientation. The expected CAS3D values could be reproduced from ideal artificial data sets. Applied random noise in artificial images lowers the detected CAS3D value, and for noise levels below 20%, the correlation can be approximated by a linear function with a slope of -0.006 CAS3D/noise%. The deviations in SL and orientation detection were determined on ideal and noisy artificial data sets and were statistically indistinguishable from 0 (null hypothesis t-test P > 0.1). The software was applied to a previously published data set of single skeletal muscle fiber volumetric SHG image data from a rat intensive care unit (ICU) model of ventilator-induced diaphragm dysfunction (VIDD) with treatment regimens involving the small anti-inflammatory molecules BGP-15, vamorolone, or prednisolone. Our method reliably reproduced the results of the previous work and improved the standard deviation of the cosine angle sum detection in all sample groups from a mean of 0.03 to 0.008. This improvement is achieved by applying analysis algorithms to the whole volumetric images in 3D in contrast to the previously common method of slice-wise XY analysis.
Assuntos
Imageamento Tridimensional , Fibras Musculares Esqueléticas , Animais , Ratos , Imageamento Tridimensional/métodos , Algoritmos , SoftwareRESUMO
Ventilator-induced diaphragm dysfunction (VIDD) is a common sequela of intensive care unit (ICU) treatment requiring mechanical ventilation (MV) and neuromuscular blockade (NMBA). It is characterised by diaphragm weakness, prolonged respirator weaning and adverse outcomes. Dissociative glucocorticoids (e.g., vamorolone, VBP-15) and chaperone co-inducers (e.g., BGP-15) previously showed positive effects in an ICU-rat model. In limb muscle critical illness myopathy, preferential myosin loss prevails, while myofibrillar protein post-translational modifications are more dominant in VIDD. It is not known whether the marked decline in specific force (force normalised to cross-sectional area) is a pure consequence of altered contractility signaling or whether diaphragm weakness also has a structural correlate through sterical remodeling of myofibrillar cytoarchitecture, how quickly it develops, and to which extent VBP-15 or BGP-15 may specifically recover myofibrillar geometry. To address these questions, we performed label-free multiphoton Second Harmonic Generation (SHG) imaging followed by quantitative morphometry in single diaphragm muscle fibres from healthy rats subjected to five or 10 days of MV + NMBA to simulate ICU treatment without underlying confounding pathology (like sepsis). Rats received daily treatment of either Prednisolone, VBP-15, BGP-15 or none. Myosin-II SHG signal intensities, fibre diameters (FD) as well as the parameters of myofibrillar angular parallelism (cosine angle sum, CAS) and in-register of adjacent myofibrils (Vernier density, VD) were computed from SHG images. ICU treatment caused a decline in FD at day 10 as well as a significant decline in CAS and VD from day 5. Vamorolone effectively recovered FD at day 10, while BGP-15 was more effective at day 5. BGP-15 was more effective than VBP-15 in recovering CAS at day 10 although not to control levels. In-register VD levels were restored at day 10 by both compounds. Our study is the first to provide quantitative insights into VIDD-related myofibrillar remodeling unravelled by SHG imaging, suggesting that both VBP-15 and BGP-15 can effectively ameliorate the structure-related dysfunction in VIDD.
RESUMO
Deep learning (DL) shows notable success in biomedical studies. However, most DL algorithms work as black boxes, exclude biomedical experts, and need extensive data. This is especially problematic for fundamental research in the laboratory, where often only small and sparse data are available and the objective is knowledge discovery rather than automation. Furthermore, basic research is usually hypothesis-driven and extensive prior knowledge (priors) exists. To address this, the Self-Enhancing Multi-Photon Artificial Intelligence (SEMPAI) that is designed for multiphoton microscopy (MPM)-based laboratory research is presented. It utilizes meta-learning to optimize prior (and hypothesis) integration, data representation, and neural network architecture simultaneously. By this, the method allows hypothesis testing with DL and provides interpretable feedback about the origin of biological information in 3D images. SEMPAI performs multi-task learning of several related tasks to enable prediction for small datasets. SEMPAI is applied on an extensive MPM database of single muscle fibers from a decade of experiments, resulting in the largest joint analysis of pathologies and function for single muscle fibers to date. It outperforms state-of-the-art biomarkers in six of seven prediction tasks, including those with scarce data. SEMPAI's DL models with integrated priors are superior to those without priors and to prior-only approaches.
Assuntos
Inteligência Artificial , Aprendizado Profundo , Redes Neurais de Computação , Algoritmos , MúsculosRESUMO
An oxidizing redox state imposes unique effects on the contractile properties of muscle. Permeabilized fibres show reduced active force generation in the presence of H2O2. However, our knowledge about the muscle fibre's elasticity or flexibility is limited due to shortcomings in assessing the passive stress-strain properties, mostly due to technically limited experimental setups. The MyoRobot is an automated biomechatronics platform that is well-capable of not only investigating calcium responsiveness of active contraction but also features precise stretch actuation to examine the passive stress-strain behaviour. Both were carried out in a consecutive recording sequence on the same fibre for 10 single fibres in total. We denote a significantly diminished maximum calcium-saturated force for fibres exposed to ≥500 µM H2O2, with no marked alteration of the pCa50 value. In contrast to active contraction (e.g., maximum isometric force activation), passive restoration stress (force per area) significantly increases for fibres exposed to an oxidizing environment, as they showed a non-linear stress-strain relationship. Our data support the idea that a highly oxidizing environment promotes non-linear fibre stiffening and confirms that our MyoRobot platform is a suitable tool for investigating redox-related changes in muscle biomechanics.
Assuntos
Cálcio , Peróxido de Hidrogênio , Peróxido de Hidrogênio/farmacologia , Fibras Musculares Esqueléticas/fisiologia , Contração Muscular/fisiologia , Fenômenos BiomecânicosRESUMO
OBJECTIVE: Muscle biomechanics is set by the spacing of repetitive striation patterns of individual sarcomeres within single muscle fibres of stacked myofibrils. Sarcomere lengths (SL) are rather unequally distributed than of equal distance. This non-uniformity may affect both, force production as well as passive-elastic deformation. However, online recording of SL during axially imposed strains is cumbersome due to a lack of compact technologies. METHODS: To fuse SL pattern recognition with restoration force assessments during quasi-static axial stretch, we implemented live tracking of SL distributions simultaneous to voice-coil actuated stretch and restoration force recordings in our MyoRobot 2.0 automated biomechatronics platform. Both were obtained online during stretch-relaxation cycles of murine single muscle fibres. RESULTS: Under quasi-static stretch conditions ( â¼ 1 µm/s fibre length changes), almost no apparent hysteresis was detected in single fibres. SL showed a non-uniform distribution. While mean SL varied between 2.6 µm and 3.4 µm upon 140% stretch, two populations of fibres were noticed: one showing a minor change in SL distribution with stretch, and one becoming more equally distributed upon stretch. CONCLUSION: A roughly 5% SL variability under rest either diminishes or remains almost unaltered upon elastic axial deformation. This may reflect differential impact of mostly extra-sarcomeric components to stretch in this stretch range. SIGNIFICANCE: The augmented functionality of the MyoRobot 2.0 towards online sarcomere analyses within single fibres shall provide a valuable tool for the muscle community to study the contribution of serial elastic and force producing elements in health and disease models.
Assuntos
Fibras Musculares Esqueléticas , Sarcômeros , Animais , Elasticidade , Camundongos , Contração Muscular , Relação Estrutura-AtividadeRESUMO
Inflammatory fibrotic tissue remodeling can lead to severe morbidity. Histopathology grading requires extraction of biopsies and elaborate tissue processing. Label-free optical technologies can provide diagnostic readout without preparation and artificial stainings and show potential for in vivo applications. Here, we present an integration of Raman spectroscopy (RS) and multiphoton microscopy for joint investigation of the bio-chemical composition and morphological features related to cellular components and connective tissue. Both modalities show that collagen signatures were significantly increased in a murine fibrosis model. Furthermore, autofluorescence signatures assigned to immune cells show high correlation with disease severity. RS indicates increased levels of elastin and lipids. Further, we investigated the effect of joint data sets on prediction performance in machine learning models. Although binary classification did not benefit from adding more features, multi-class classification was improved by integrated data sets.
Assuntos
Microscopia de Fluorescência por Excitação Multifotônica , Análise Espectral Raman , Animais , Tecido Conjuntivo , Pulmão , Aprendizado de Máquina , Camundongos , Microscopia de Fluorescência por Excitação Multifotônica/métodos , Análise Espectral Raman/métodosRESUMO
OBJECTIVE: Decellularizing solid organs is a promising top-down process to produce acellular bio-scaffolds for 'de novo' regrowth or application as tissue 'patches' that compensate, e.g., large volumetric muscle loss in reconstructive surgery. Therefore, generating standardized acellular muscle scaffolds marks a pressing area of need. Although animal muscle decellularization protocols were established, those are mostly manually performed and lack defined bioreactor environments and metrologies to assess decellularization quality in real-time. To close this gap, we engineered an automated bioreactor system to provide chemical decellularization solutions to immersed whole rat gastrocnemius medialis muscle through perfusion of the main feeding arteries. RESULTS: Perfusion control is adjustable according to decellularization quality feedback. This was assessed both from (i) ex situ assessment of sarcomeres/nuclei through multiphoton fluorescence and label-free Second Harmonic Generation microscopy and DNA quantification, along with (ii) in situ within the bioreactor environment assessment of the sample's passive mechanical elasticity. CONCLUSION: We find DNA and sarcomere-free constructs after 72 h of 0.1% SDS perfusion-decellularization. Furthermore, passive elasticity can be implemented as additional online decellularization quality measure, noting a threefold elasticity decrease in acellular constructs. SIGNIFICANCE: Our MyoBio represents a novel and useful automated bioreactor environment for standardized and controlled generation of acellular whole muscle scaffolds as a valuable source for regenerative medicine.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , Animais , Reatores Biológicos , DNA , Matriz Extracelular , Músculo Esquelético , Perfusão , Ratos , Engenharia Tecidual/métodosRESUMO
A high-fat diet increases the risk of insulin resistance, type-2 diabetes, and non-alcoholic steato-hepatitis. Here we identified two heat-shock proteins, Heat-Shock-Protein70 and Glucose-Regulated Protein78, which are increased in the jejunum of rats on a high-fat diet. We demonstrated a causal link between these proteins and hepatic and whole-body insulin-resistance, as well as the metabolic response to bariatric/metabolic surgery. Long-term continuous infusion of Heat-Shock-Protein70 and Glucose-Regulated Protein78 caused insulin-resistance, hyperglycemia, and non-alcoholic steato-hepatitis in rats on a chow diet, while in rats on a high-fat diet continuous infusion of monoclonal antibodies reversed these phenotypes, mimicking metabolic surgery. Infusion of these proteins or their antibodies was also associated with shifts in fecal microbiota composition. Serum levels of Heat-Shock-Protein70 and Glucose-Regulated Protein78were elevated in patients with non-alcoholic steato-hepatitis, but decreased following metabolic surgery. Understanding the intestinal regulation of metabolism may provide options to reverse metabolic diseases.
Assuntos
Hepatite , Hiperglicemia , Resistência à Insulina , Hepatopatia Gordurosa não Alcoólica , Ratos , Animais , Resistência à Insulina/genética , Chaperona BiP do Retículo Endoplasmático , Proteínas de Choque Térmico/metabolismo , Insulina/metabolismo , Hepatopatia Gordurosa não Alcoólica/metabolismo , Dieta Hiperlipídica/efeitos adversos , Proteínas de Choque Térmico HSP70/metabolismo , Fígado/metabolismo , Hiperglicemia/metabolismo , Glucose/metabolismoRESUMO
Rationale: Structural remodeling or damage as a result of disease or injury is often not evenly distributed throughout a tissue but strongly depends on localization and extent of damaging stimuli. Skeletal muscle as a mechanically active organ can express signs of local or even systemic myopathic damage, necrosis, or repair. Conventionally, muscle biopsies (patients) or whole muscles (animal models) are mechanically sliced and stained to assess structural alterations histologically. Three-dimensional tissue information can be obtained by applying deep imaging modalities, e.g. multiphoton or light-sheet microscopy. Chemical clearing approaches reduce scattering, e.g. through matching refractive tissue indices, to overcome optical penetration depth limits in thick tissues. Methods: Here, we optimized a range of different clearing protocols. We find aqueous solution-based protocols employing (20-80%) 2,2'-thiodiethanol (TDE) to be advantageous over organic solvents (dibenzyl ether, cinnamate) regarding the preservation of muscle morphology, ease-of-use, hazard level, and costs. Results: Applying TDE clearing to a mouse model of local cardiotoxin (CTX)-induced muscle necrosis, a complete loss of myosin-II signals was observed in necrotic areas with little change in fibrous collagen or autofluorescence (AF) signals. The 3D aspect of myofiber integrity could be assessed, and muscle necrosis in whole muscle was quantified locally via the ratios of detected AF, forward- and backward-scattered Second Harmonic Generation (fSHG, bSHG) signals. Conclusion: TDE optical clearing is a versatile tool to study muscle architecture in conjunction with label-free multiphoton imaging in 3D in injury/myopathy models and might also be useful in studying larger biofabricated constructs in regenerative medicine.
Assuntos
Microscopia Confocal/métodos , Microscopia de Fluorescência por Excitação Multifotônica/métodos , Músculo Esquelético/metabolismo , Necrose/diagnóstico , Animais , Cardiotoxinas/farmacologia , Colágeno/metabolismo , Matriz Extracelular/efeitos dos fármacos , Matriz Extracelular/metabolismo , Imageamento Tridimensional/métodos , Camundongos , Camundongos Endogâmicos C57BL , Músculo Esquelético/efeitos dos fármacos , Miofibrilas/metabolismo , Miosina Tipo II/metabolismo , Necrose/induzido quimicamente , Necrose/metabolismo , Compostos de Sulfidrila/farmacologiaRESUMO
Monoclonal antibodies have become an increasingly important part of fundamental research and medical applications. To meet the high market demand for monoclonal antibodies in the biopharmaceutical sector, industrial manufacturing needs to be achieved by large scale, highly productive and consistent production processes. These are subject to international guidelines and have to be monitored intensely due to high safety standards for medical applications. Surface plasmon resonance spectroscopy - a fast, real-time, and label-free bio-sensing method - represents an interesting alternative to the quantification of monoclonal antibody concentrations by enzyme-linked immunosorbent assay during monoclonal antibody production. For the application of monitoring bioactive and total monoclonal antibody concentrations in cell culture samples, a surface plasmon resonance assay using a target-monoclonal antibody model system was developed. In order to ensure the subsequent detection of bioactive monoclonal antibody concentrations, suitable immobilization strategies of the target were identified. A significant decrease of the limit of detection was achieved by using an adapted affinity method compared to the commonly used amine coupling. Furthermore, the system showed limit of detection in the low ng/mL range similar to control quantifications by enzyme-linked immunosorbent assay. Moreover, the comparison of total to bioactive monoclonal antibody concentrations allows analysis of antibody production efficiency. The development of an alternative quantification system to monitor monoclonal antibody production was accomplished using surface plasmon resonance with the advantage of low analyte volume, shorter assay time, and biosensor reusability by target-layer regeneration. The established method provides the basis for the technical development of a surface plasmon resonance-based system for continuous process monitoring.
RESUMO
A methodology has been developed to quantify the performance of an air-monitoring network in terms of frequency of detection. Frequency of detection is defined as the fraction of "events" that result in a detection at either a single sampler or network of samplers. An "event" is defined as a release to the atmosphere of a specified amount of activity over a finite duration that begins on a given day and hour of the year. The methodology uses an atmospheric transport model to predict air concentrations of radionuclides at the samplers for a given release time and duration. Another metric of interest determined by the methodology is called the network intensity, which is defined as the fraction of samplers in the network that have a positive detection for a given event. The frequency of detection methodology allows for evaluation of short-term releases that include effects of short-term variability in meteorological conditions. The methodology was tested using the U.S. Department of Energy Idaho National Laboratory Site ambient air-monitoring network consisting of 37 low-volume air samplers in 31 different locations covering a 17,630 km region. Releases from six major facilities distributed over an area of 1,435 km were modeled and included three stack sources and eight ground-level sources. A Lagrangian Puff air dispersion model (CALPUFF) was used to model atmospheric transport. The model was validated using historical Sb releases and measurements. Relevant 1-wk release quantities from each emission source were calculated based on a dose of 1.9×10 mSv at a public receptor (0.01 mSv assuming release persists over a year). Important radionuclides were Am, Cs, Pu, Pu, Sr, and tritium. Results show the detection frequency was over 97.5% for the entire network considering all sources and radionuclides. Network intensity results ranged from 3.75% to 62.7%. Evaluation of individual samplers indicated some samplers were poorly located and added little to the overall effectiveness of the network. Using the frequency of detection methods, alternative sampler placements were simulated that could substantially improve the performance and efficiency of the network.