Thiol-ene Reaction: An Efficient Tool to Design Lipophilic Polyphosphoesters for Drug Delivery Systems.

Poly(ethylene glycol)-b-polyphosphoester (PEG-b-PPE) block copolymer nanoparticles are promising carriers for poorly water soluble drugs. To enhance the drug loading capacity and efficiency of such micelles, a strategy was investigated for increasing the lipophilicity of the PPE block of these PEG-b-PPE amphiphilic copolymers. A PEG-b-PPE copolymer bearing pendant vinyl groups along the PPE block was synthesized and then modified by thiol-ene click reaction with thiols bearing either a long linear alkyl chain (dodecyl) or a tocopherol moiety. Ketoconazole was used as model for hydrophobic drugs. Comparison of the drug loading with PEG-b-PPE bearing shorter pendant groups is reported evidencing the key role of the structure of the pendant group on the PPE backbone. Finally, a first evidence of the biocompatibility of these novel PEG-b-PPE copolymers was achieved by performing cytotoxicity tests. The PEG-b-PPE derived by tocopherol was evidenced as particularly promising as delivery system of poorly water-soluble drugs.

Design of Degradable Polyphosphoester Networks with Tailor-Made Stiffness and Hydrophilicity as Scaffolds for Tissue Engineering.

In the recent decades, biodegradable and biocompatible polyphosphoesters (PPEs) have gained wide attention in the biomedical field as relevant substitutes for conventional aliphatic polyesters. These amorphous materials of low glass transition temperature offer promise for the design of soft scaffolds for tissue engineering. Advantageously, the easy variation of the nature of the lateral pendant groups of PPEs allows the insertion of pendent unsaturations valuable for their further cross-linking. In addition, varying the length of the pendent alkyl chains allows tuning their hydrophilicity. The present work aims at synthesizing PPE networks of well-defined hydrophilicity and mechanical properties. More precisely, we aimed at preparing degradable materials exhibiting identical hydrophilicity but different mechanical properties and vice versa. For that purpose, PPE copolymers were synthesized by ring-opening copolymerization of cyclic phosphate monomers bearing different pendent groups (e.g., methyl, butenyl, and butyl). After UV irradiation, a stable and well-defined cross-linked material is obtained with the mechanical property of the corresponding polymer films controlled by the composition of the starting PPE copolymer. The results demonstrate that cross-linking density could be correlated with the mechanical properties, swelling behavior, and degradation rate of the polymers network. The polymers were compatible to human skin fibroblast cells and did not exhibit significant cytotoxicity up to 0.5 mg mL-1. In addition, degradation products appeared nontoxic to skin fibroblast cells and showed their potential as promising scaffolds for tissue engineering.

Reversible TAD Chemistry as a Convenient Tool for the Design of (Re)processable PCL-Based Shape-Memory Materials.

A chemically cross-linked but remarkably (re)processable shape-memory polymer (SMP) is designed by cross-linking poly(ε-caprolactone) (PCL) stars via the efficient triazolinedione click chemistry, based on the very fast and reversible Alder-ene reaction of 1,2,4-triazoline-3,5-dione (TAD) with indole compounds. Typically, a six-arm star-shaped PCL functionalized by indole moieties at the chain ends is melt-blended with a bisfunctional TAD, directly resulting in a cross-linked PCL-based SMP without the need of post-curing treatment. As demonstrated by the stress relaxation measurement, the labile character of the TAD-indole adducts under stress allows for the solid-state plasticity reprocessing of the permanent shape at will by compression molding of the raw cross-linked material, while keeping excellent shape-memory properties.

Accelerating the end-to-end production of cyclic phosphate monomers with modular flow chemistry.

The biocompatibility, tunable degradability and broad functionalities of polyphosphoesters and their potential for biomedical applications have stimulated a renewed interest from Chemistry, Medicinal Chemistry and Polymer Sciences. Commercial applications of polyphosphoesters as biomaterials are still hampered because of the time and resource-intensive sourcing of their corresponding monomers, in addition to the corrosive and sensitive nature of their intermediates and by-products. Here, we present a groundbreaking challenge for sourcing the corresponding cyclic phosphate monomers by a different approach. This approach relies on the use of continuous flow technologies to intensify the end-to-end preparation of cyclic phosphate monomers with a semi-continuous modular flow platform. The applied flow technology mitigates both safety and instability issues related to the more classical production of cyclic phosphate monomers. The first flow module allows safe synthesis of a library of cyclic chlorophosphite building blocks and features in-line 31P NMR real-time monitoring. After optimization on the microfluidic scale, this first module is successfully transposed toward mesofluidic scale with a daily throughput of 1.88 kg. Downstream of the first module, a second module is present, allowing the quantitative conversion of cyclic chlorophosphites with molecular oxygen toward chlorophosphate derivatives within seconds. The two modules are concatenable with a downstream semi-batch quench of intermediate chlorophosphate with alcohols, hence affording the corresponding cyclic phosphate monomers. Such a continuous flow setup provides considerable unprecedented advantages to safely and efficiently synthesize a library of versatile high value-added cyclic phosphate monomers at large scale. These freshly produced monomers can be successfully (co)polymerized, using either batch or flow protocols, into well-defined polyphosphoesters with assessed thermal properties and cytotoxicity.

Thermoreversibly crosslinked poly(ε-caprolactone) as recyclable shape-memory polymer network.

A new concept to build shape memory polymers (SMP) combining outstanding fixity and recovery ratios (both above 99% after only one training cycle) typical of chemically crosslinked SMPs with reprocessability restricted to physically crosslinked SMPs is demonstrated by covalently bonding, through thermoreversible Diels-Alder (DA) adducts, star-shaped poly(ε-caprolactones) (PCL) end-functionalized by furan and maleimide moieties. A PCL network is easily prepared by melt-blending complementary end-functional star polymers in retro DA regime, then by curing at lower temperature to favour the DA cycloaddition. Such covalent network can be reprocessed when heated again at the retro DA temperature. The resulting SMP shows still excellent shape memory properties attesting for its good recyclability.

Paclitaxel-loaded multifunctional nanoparticles for the targeted treatment of glioblastoma.

INTRODUCTION: We hypothesised that the active targeting of αvß3 integrin overexpressed in neoangiogenic blood vessels and glioblastoma (GBM) cells combined with magnetic targeting of paclitaxel- and SPIO-loaded PLGA-based nanoparticles could improve accumulation of nanoparticles in the tumour and therefore improve the treatment of GBM. METHODS: PTX/SPIO PLGA nanoparticles with or without RGD-grafting were characterised. Their in vitro cellular uptake and cytotoxicity was evaluated by fluorospectroscopy and MTT assay. In vivo safety and anti-tumour efficacy of different targeting strategies were evaluated in orthotopic U87MG tumour model over multiple intravenous injections. RESULTS: The nanoparticles of 250 nm were negatively charged. RGD targeted nanoparticles showed a specific and higher cellular uptake than untargeted nanoparticles by activated U87MG and HUVEC cells. In vitro IC50 of PTX after 48 h was ∼1 ng/mL for all the PTX-loaded nanoparticles. The median survival time of the mice treated with magnetic targeted nanoparticles was higher than the control (saline) mice or mice treated with other evaluated strategies. The 6 doses of PTX did not induce any detectable toxic effects on liver, kidney and heart when compared to Taxol. CONCLUSION: The magnetic targeting strategy resulted in a better therapeutic effect than the other targeting strategies (passive, active).

Sulindac encapsulation and release from functional poly(HEMA) microparticles prepared in supercritical carbon dioxide.

Sulindac loaded poly(HEMA) cross-linked microparticles were synthesized via one-pot free-radical dispersion polymerisation in supercritical carbon dioxide (scCO2) in presence of photocleavable diblock stabilisers based on polyethylene oxide (PEO) and poly(heptadecafluorodecyl acrylate) (PFDA) bearing a o-nitrobenzyl photosensitive junction (hv) (PEO-hv-PFDA), and ethylene glycol dimethacrylate (EGDMA) as cross-linker. Poly(HEMA) cross-linked microparticles either empty or sulindac loaded were obtained with well-defined spherical morphology with the sizes between 250 and 350 nm. Additionally, upon UV-photolysis the stabiliser on the surface was cleaved which permits to microparticles to be redispersed in water leading to water swollen microgels about 2.1-3.6 µm. Moreover, the release behaviour from obtained microgels indicated the sustained release of sulindac over 10 days. Besides, the surface modification after UV-photolysis was studied and proved that the particles can be functionalised with further chemistries.

In situ photochemical crosslinking of hydrogel membrane for Guided Tissue Regeneration.

OBJECTIVE: Periodontitis is an inflammatory disease that destroys the tooth-supporting attachment apparatus. Guided tissue regeneration (GTR) is a technique based on a barrier membrane designed to prevent wound space colonization by gingival cells. This study examined a new formulation composed of two polymers that could be photochemically cross-linked in situ into an interpenetrated polymer network (IPN) forming a hydrogel membrane. METHODS: We synthetized and characterized silanized hydroxypropyl methylcellulose (Si-HPMC) for its cell barrier properties and methacrylated carboxymethyl chitosan (MA-CMCS) for its degradable backbone to use in IPN. Hydrogel membranes were cross-linked using riboflavin photoinitiator and a dentistry visible light lamp. The biomaterial's physicochemical and mechanical properties were determined. Hydrogel membrane degradation was evaluated in lysozyme. Cytocompatibility was estimated by neutral red uptake. The cell barrier property was studied culturing human primary gingival fibroblasts or human gingival explants on membrane and analyzed with confocal microscopy and histological staining. RESULTS: The IPN hydrogel membrane was obtained after 120s of irradiation. The IPN showed a synergistic increase in Young moduli compared with the single networks. The CMCS addition in IPN allows a progressive weight loss compared to each polymer network. Cytocompatibility was confirmed by neutral red assay. Human cell invasion was prevented by hydrogel membranes and histological sections revealed that the biomaterial exhibited a barrier effect in contact with soft gingival tissue. SIGNIFICANCE: We demonstrated the ability of an innovative polymer formulation to form in situ, using a dentist's lamp, an IPN hydrogel membrane, which could be an easy-to-use biomaterial for GTR therapy.

Hybrid Gd3+/cisplatin cross-linked polymer nanoparticles enhance platinum accumulation and formation of DNA adducts in glioblastoma cell lines.

Glioblastoma is the most frequent and aggressive primary malignant tumor of the central nervous system with a gloomy prognosis. Platinum derivatives and one among them, cisplatin, exhibited promising results when locally administered into the brain of glioblastoma bearing rats. Nanovectorization of anticancer agents through polymeric nanoparticles may even promote drug accumulation within cells, thus concentrating the drug efficiently at its target. Anchorage of gadolinium complexes on the corona of such smart drug delivery systems could further allow magnetic resonance imaging (MRI) monitoring of the nanoplatform biodistribution in the damaged parenchyma and its therapeutic benefit. For this purpose, a biocompatible amphiphilic triblock copolymer, made of degradable polyester and polycarbonate and bioeliminable polyethylene oxide (PEO), was synthesized by successive ring-opening polymerizations. After micellization in water, gadolinium complexes were grafted onto the PEO micelle corona and the carboxylate functions, located at the surface of the micelle's core, were able to cross-link with Pt(ii) complexes. A macromolecular prodrug was therefore recovered in which more than one third of the carboxylate functions were linked to a platinum atom. By this strategy, stable cisplatin cross-linked nanoparticles were formulated with a mean size in the range of 100.63 ± 12.04 nm consistent with biological investigations. Relaxometry measurements both in water and in plasma at 7 T, 25 °C, confirmed the intrinsic potential of these hybrid nanoparticles as alternative MRI contrast agents with a substantial increase in the r2/r1 ratio by a factor of 3.3 and 2.7, respectively, compared to the conventional low molar mass Gd-DTPA. As a result, their infusion within the striatum of glioblastoma-bearing mice resulted in a hypersignal on T2-weighted MR images that persisted over time. Ultimately, the formulated prodrug exhibited up to 50-fold increased accumulation in human glioblastoma cell lines and up to 32-fold enhanced subsequent Pt-DNA adduct formation in comparison with free cisplatin, thus supporting the potential of this innovative bimodal tool for further applications.

Antimicrobial peptide encapsulation and sustained release from polymer network particles prepared in supercritical carbon dioxide.

Antimicrobial peptide loaded poly(2-hydroxyethyl methacrylate) particles were synthesized in supercritical carbon dioxide via one-pot free-radical dispersion polymerisation of 2-hydroxyethyl methacrylate and a cross-linker. Discrete particles with a well-defined spherical morphology and a diameter as low as 450 nm have been obtained in mild conditions. The encapsulation and release of the peptide were confirmed by antimicrobial tests that demonstrated for the first time a sustained release of the peptide from poly(2-hydroxyethyl methacrylate) microgels prepared by one-pot dispersion polymerization in supercritical carbon dioxide and then dispersed in water.

Bioreducible cross-linked core polymer micelles enhance in vitro activity of methotrexate in breast cancer cells.

Polymer micelles have emerged as promising carriers for controlled release applications, however, several limitations of micelle-based drug delivery have also been reported. To address these issues, we have synthesized a functional biodegradable and cytocompatible block copolymer based on methoxypoly(ethyleneglycol)-b-poly(ε-caprolactone-co-α-azido-ε-caprolactone) (mPEG-b-poly(εCL-co-αN3εCL)) as a precursor of reduction sensitive core-crosslinked micelles. The synthesized polymer was formulated as micelles using a dialysis method and loaded with the anti-inflammatory and anti-cancer drug methotrexate (MTX). The micellar cores were subsequently crosslinked at their pendent azides by a redox-responsive bis(alkyne). The size distributions and morphology of the polymer micelles were assessed using dynamic light scattering (DLS) and transmission electron microscopy, and drug release assays were performed under simplified (serum free) physiological and reductive conditions. Cellular uptake studies in human breast cancer cells were performed using Oregon-green loaded core-crosslinked micelles. The MTX-loaded core-crosslinked micelles were assessed for their effects on metabolic activity in human breast cancer (MCF-7) cells by evaluating the reduction of the dye MTT 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide. The apoptosis inducing potential of MTX-loaded core-crosslinked micelles was analysed using Hoechst/propidium iodide (PI) and annexin-V/PI assays. The data from these experiments indicated that drug release from these cross-linked micelles can be controlled and that the redox-responsive micelles are more effective carriers for MTX than non-crosslinked analogues and the free drug in the cell-lines tested.

Combination of ring-opening polymerization and "click" chemistry towards functionalization of aliphatic polyesters.

Azide pendent groups of aliphatic polyesters have been derivatized into tertiary amines, ammonium salts and poly(ethylene oxide) grafts. The experimental conditions have been optimized (organic solvent, 35 degrees C), such that the aliphatic polyesters are not degraded, including even poly(lactide) which is very sensitive to attack by weak nucleophiles.

Poly(ethylene glycol) grafted polylactide based copolymers for the preparation of PLA-based nanocarriers and hybrid hydrogels.

In previous works, poly(D,L-lactide-co-ɛCL-poly(ethylene glycol) (poly(D,L-La-co-αPEGɛCL) amphiphilic graft-copolymers were successfully synthesized according to a copper azide-alkyne cycloaddition (CuAAC) strategy. This paper aims at reporting on the behavior of this amphiphilic copolymer in water, which was not studied in the previous paper. Moreover, the ability of the copolymer to stabilize a PLA nanoparticles aqueous suspension is presented. For this purpose, dynamic light scattering (DLS) and transmission electron microscopy (TEM) are proposed to characterize the nanoparticles in solution. Otherwise, the strategy developed for the synthesis of the amphiphilic copolymers was adapted and extended to the synthesis of PLA-based degradable hydrogel, potentially applicable as drug-loaded degradable polymer implant.

Direct Route to Well-Defined Poly(ionic liquid)s by Controlled Radical Polymerization in Water.

The precision synthesis of poly(ionic liquid)s (PILs) in water is achieved for the first time by the cobalt-mediated radical polymerization (CMRP) of N-vinyl-3-alkylimidazolium-type monomers following two distinct protocols. The first involves the CMRP of various 1-vinyl-3-alkylimidazolium bromides conducted in water in the presence of an alkyl-cobalt(III) complex acting as a monocomponent initiator and mediating agent. Excellent control over molar mass and dispersity is achieved at 30 °C. Polymerizations are complete in a few hours, and PIL chain-end fidelity is demonstrated up to high monomer conversions. The second route uses the commercially available bis(acetylacetonato)cobalt(II) (Co(acac)2) in conjunction with a simple hydroperoxide initiator (tert-butyl hydroperoxide) at 30, 40, and 50 °C in water, facilitating the scaling-up of the technology. Both routes prove robust and straightforward, opening new perspectives onto the tailored synthesis of PILs under mild experimental conditions in water.

Tocol modified glycol chitosan for the oral delivery of poorly soluble drugs.

The aim of this study was to develop tocol derivatives of chitosan able (i) to self-assemble in the gastrointestinal tract and (ii) to enhance the solubility of poorly soluble drugs. Among the derivatives synthesized, tocopherol succinate glycol chitosan (GC-TOS) conjugates spontaneously formed micelles in aqueous solution with a critical micelle concentration of 2 µg mL(-1). AFM and TEM analysis showed that spherical micelles were formed. The GC-TOS increased water solubility of 2 model class II drugs. GC-TOS loading efficiency was 2.4% (w/w) for ketoconazole and 0.14% (w/w) for itraconazole, respectively. GC-TOS was non-cytotoxic at concentrations up to 10 mg mL(-1). A 3.4-fold increase of the apparent permeation coefficient of ketoconazole across a Caco-2 cell monolayer was demonstrated. Tocol polymer conjugates may be promising vehicles for the oral delivery of poorly soluble drugs.

New functional poly(N-vinylpyrrolidone) based (co)polymers via photoinitiated cobalt-mediated radical polymerization.

The photoinitiated cobalt-mediated radical polymerization enables the synthesis of novel α-functional and α,ω-telechelic polymers. In combination with ring-opening polymerization, it also produces new amphiphilic copolymers which self-assemble into flower-like vesicles in water.

In vivo biocompatibility of three potential intraperitoneal implants.

The intraperitoneal biocompatibility of PDMS, polyHEMA and pEVA was investigated in rats, rabbits and rhesus monkeys. No inflammation was evidenced by hematological analyses and measurement of inflammatory markers throughout the experiment and by post-mortem examination of the pelvic cavity. After 3 or 6 months, histological analysis revealed fibrous tissue encapsulating PDMS and PEVA implants in all species and polyHEMA implants in rabbits and monkeys. Calcium deposits were observed inside polyHEMA implants. The intraperitoneal biocompatibility of all 3 polymers makes them suitable for the design of drug delivery systems, which may be of great interest for pathologies confined to the pelvic cavity.

Synthesis of eight- and star-shaped poly(epsilon-caprolactone)s and their amphiphilic derivatives.

Spirocyclic tin dialkoxides are unique initiators for the ring-expansion polymerization of lactones leading to complex, but well-defined macromolecular architectures. In a first example, epsilon-caprolactone (epsilon CL) was polymerized, followed by the resumption of polymerization of a mixture of epsilon CL and epsilon CL alpha-substituted by a chloride (alpha Cl epsilon CL), so leading to "living" eight-shaped chains. Upon hydrolysis of the alkoxides, a four-arm star-shaped copolyester was formed, whose each arm was grafted by conversion of the chloride units into azides, followed by the Huisgen's [3+2] cycloaddition of alkyne end-capped poly(ethylene oxide) (PEO) onto the azide substituents. The complexity of this novel amphiphilic architecture was increased further by substituting the four-arm interconnecting PCL by an eight-shaped PCL. In a preliminary step, epsilon CL was polymerized followed by a few units of epsilon CL alpha-substituted by an acrylate. The intramolecular photo-crosslinking of the acrylates adjacent to the tin dialkoxides was effective in stabilizing the eight-shaped polyester while preserving the chain growth sites. This quite unusual tetrafunctional macroinitiator was used to copolymerize epsilon CL and alpha Cl epsilon CL, followed by hydrolysis of the alkoxides, conversion of the chloride units into azides and grafting of the four arms by PEO (see above). This architecture reported for the very first time is nothing but a symmetrical four-tail eight-shaped copolyester macromolecule.