Growth and Transfer of Seamless 3D Graphene-Nanotube Hybrids.

Seamlessly connected graphene and carbon nanotube hybrids (GCNTs) have great potential as carbon platform structures in electronics due to their high conductivity and high surface area. Here, we introduce a facile method for making patterned GCNTs and their intact transfer onto other substrates. The mechanism for selective growth of vertically aligned CNTs (VA-CNTs) on the patterned graphene is discussed. The complete transfer of the GCNT pattern onto other substrates is possible because of the mechanical strength of the GCNT hybrids. Electrical conductivity measurements of the transferred GCNT structures show Ohmic contact through the VA-CNTs to graphene--evidence of its integrity after the transfer process.

Mechanistic understanding of calcium-phosphonate solid dissolution and scale inhibitor return behavior in oilfield reservoir: formation of middle phase.

Phosphonates are an important class of mineral scale inhibitors used for oilfield scale control. By injecting the phosphonate into an oilfield reservoir, calcium-phosphonate precipitate will form and subsequently release the phosphonate into produced water for scale control. In this study, a systematic procedure is developed to mechanistically characterize an acidic calcium-phosphonate amorphous material that is later developed into a middle phase and eventually a crystalline phase. The phosphonate used in this study is diethylenetriamine pentakis (methylene phosphonic acid) (DTPMP). An amorphous calcium-DTPMP solid is precipitated by mixing a calcium-containing solution with a DTPMP solution. The stoichiometry of this initially formed solid can be experimentally confirmed via a static dissolution test. Following another dynamic development test, two additional Ca-DTPMP solid phases, i.e., a middle phase and a crystalline phase have been observed. Electron microscopy and X-ray diffraction were employed to characterize the morphology and crystallinity of different Ca-DTPMP solids of interest. Evidently, the dynamic brine flushing of the Ca-DTPMP solid developed the initially amorphous material into a middle phase solid with an amorphous/microcrystalline structure and eventually into a crystalline material. Furthermore, a dissolution characterization study was carried out to determine the solubility product of the middle phase solid at different conditions. The obtained mechanistic understanding of the Ca-DTPMP solid related to precipitation chemistry, dissolution behavior and phase transition is critical to elucidate oilfield DTPMP return data and more importantly, can optimize the oilfield scale squeeze design to achieve an extended squeeze lifetime.

Three-Dimensional Networked Nanoporous Ta2O(5-x) Memory System for Ultrahigh Density Storage.

Oxide-based resistive memory systems have high near-term promise for use in nonvolatile memory. Here we introduce a memory system employing a three-dimensional (3D) networked nanoporous (NP) Ta2O5-x structure and graphene for ultrahigh density storage. The devices exhibit a self-embedded highly nonlinear I-V switching behavior with an extremely low leakage current (on the order of pA) and good endurance. Calculations indicated that this memory architecture could be scaled up to a ∼162 Gbit crossbar array without the need for selectors or diodes normally used in crossbar arrays. In addition, we demonstrate that the voltage point for a minimum current is systematically controlled by the applied set voltage, thereby offering a broad range of switching characteristics. The potential switching mechanism is suggested based upon the transformation from Schottky to Ohmic-like contacts, and vice versa, depending on the movement of oxygen vacancies at the interfaces induced by the voltage polarity, and the formation of oxygen ions in the pores by the electric field.

Unimolecular Submersible Nanomachines. Synthesis, Actuation, and Monitoring.

Unimolecular submersible nanomachines (USNs) bearing light-driven motors and fluorophores are synthesized. NMR experiments demonstrate that the rotation of the motor is not quenched by the fluorophore and that the motor behaves in the same manner as the corresponding motor without attached fluorophores. No photo or thermal decomposition is observed. Through careful design of control molecules with no motor and with a slow motor, we found using single molecule fluorescence correlation spectroscopy that only the molecules with fast rotating speed (MHz range) show an enhancement in diffusion by 26% when the motor is fully activated by UV light. This suggests that the USN molecules give ∼9 nm steps upon each motor actuation. A non-unidirectional rotating motor also results in a smaller, 10%, increase in diffusion. This study gives new insight into the light actuation of motorized molecules in solution.

Nanoporous silicon oxide memory.

Oxide-based two-terminal resistive random access memory (RRAM) is considered one of the most promising candidates for next-generation nonvolatile memory. We introduce here a new RRAM memory structure employing a nanoporous (NP) silicon oxide (SiOx) material which enables unipolar switching through its internal vertical nanogap. Through the control of the stochastic filament formation at low voltage, the NP SiOx memory exhibited an extremely low electroforming voltage (∼ 1.6 V) and outstanding performance metrics. These include multibit storage ability (up to 9-bits), a high ON-OFF ratio (up to 10(7) A), a long high-temperature lifetime (≥ 10(4) s at 100 °C), excellent cycling endurance (≥ 10(5)), sub-50 ns switching speeds, and low power consumption (∼ 6 × 10(-5) W/bit). Also provided is the room temperature processability for versatile fabrication without any compliance current being needed during electroforming or switching operations. Taken together, these metrics in NP SiOx RRAM provide a route toward easily accessed nonvolatile memory applications.

Flexible three-dimensional nanoporous metal-based energy devices.

A flexible three-dimensional (3-D) nanoporous NiF2-dominant layer on poly(ethylene terephthalate) has been developed. The nanoporous layer itself can be freestanding without adding any supporting carbon materials or conducting polymers. By assembling the nanoporous layer into two-electrode symmetric devices, the inorganic material delivers battery-like thin-film supercapacitive performance with a maximum capacitance of 66 mF cm(-2) (733 F cm(-3) or 358 F g(-1)), energy density of 384 Wh kg(-1), and power density of 112 kW kg(-1). Flexibility and cyclability tests show that the nanoporous layer maintains its high performance under long-term cycling and different bending conditions. The fabrication of the 3-D nanoporous NiF2 flexible electrode could be easily scaled.

Use of isotope differential derivatization for simultaneous determination of thiols and oxidized thiols by liquid chromatography tandem mass spectrometry.

Here we report a new isotopic pair of derivatization reagents, ω-bromoacetonylquinolinium bromide (BQB) and d(7)-ω-bromoacetonylquinolinium bromide (d(7)-BQB). BQB and d(7)-BQB both rapidly and selectively reacted with thiols in acidic medium within 3min with the aid of a microwave. Reduced thiols and total thiols in urine were labeled with BQB and d(7)-BQB, respectively. The BQB- and d(7)-BQB-labeled urine samples were then mixed and separated on a HILIC (hydrophilic interaction chromatography) column followed by electrospray ionization tandem mass spectrometry (ESI-MS/MS) detection. The new strategy, which we have named isotope differential derivatization, allows us to simultaneously determine thiols and oxidized thiols in a single run. Compared with positive mode ESI detection of unlabeled thiols, the positive mode ESI-MS signal intensities of BQB-labeled thiols were found to increase by 10-, 20-, and 40-fold for cysteine (Cys), homocysteine (HCys), and glutathione (GSH), respectively (unlabeled N-acetylcysteine (Nac) is difficult to detect by ESI-MS in positive mode due to its low ionization efficiency). The detection limits calculated at a signal-to-noise ratio of 3 were found to be 8.02, 1.56, 0.833, and 3.27nmol/L for Cys, HCys, Nac, and GSH, respectively. Recoveries of thiols and disulfides from spiked urine samples were between 80% and 105%. The method was successfully used to determine thiols and oxidized thiols in urine samples of 25 healthy volunteers.

Flexible Nanoporous WO3-x Nonvolatile Memory Device.

Flexible resistive random access memory (RRAM) devices have attracted great interest for future nonvolatile memories. However, making active layer films at high temperature can be a hindrance to RRAM device fabrication on flexible substrates. Here, we introduced a flexible nanoporous (NP) WO3-x RRAM device using anodic treatment in a room-temperature process. The flexible NP WO3-x RRAM device showed bipolar switching characteristics and a high ION/IOFF ratio of ∼10(5). The device also showed stable retention time over 5 × 10(5) s, outstanding cell-to-cell uniformity, and bending endurance over 10(3) cycles when measured in both the flat and the maximum bending conditions.

High-Performance Pseudocapacitive Microsupercapacitors from Laser-Induced Graphene.

All-solid-state, flexible, symmetric, and asymmetric microsupercapacitors are fabricated by a simple method in a scalable fashion from laser-induced graphene on commercial polyimide films, followed by electrodeposition of pseudocapacitive materials on the interdigitated in-plane architectures. These microsupercapacitors demonstrate comparable energy density to commercial lithium thin-film batteries, yet exhibit more than two orders of magnitude higher power density with good mechanical flexibility.

Porous cobalt-based thin film as a bifunctional catalyst for hydrogen generation and oxygen generation.

A mixed-phased Co-based catalyst composed of Co phosphide and Co phosphate is successfully fabricated for bifunctional water electrolysis. The highly porous morphology in this anodized film enables efficient catalytic activity toward water splitting in an extremely low loading mass. The mixed phases in the porous film afford an ability to generate both H2 and O2 in a single electrolyzer.

Carbon-Free Electrocatalyst for Oxygen Reduction and Oxygen Evolution Reactions.

A nanoporous Ag-embedded SnO2 thin film was fabricated by anodic treatment of electrodeposited Ag-Sn alloy layers. The ordered nanoporous structure formed by anodization played a key role in enhancing the electrocatalytic performance of the Ag-embedded SnO2 layer in several ways: (1) the roughness factor of the thin film is greatly increased from 23 in the compact layer to 145 in the nanoporous layer, creating additional active sites that are involved in oxygen electrochemical reactions; (2) a trace amount of Ag (∼1.7 at %, corresponding to a Ag loading of ∼3.8 µg cm(-2)) embedded in the self-organized SnO2 nanoporous matrix avoids the agglomeration of nanoparticles, which is a common problem leading to the electrocatalyst deactivation; (3) the fabricated nanoporous thin film is active without additional additives or porous carbon that is usually necessary to support and stabilize the electrocatalyst. More importantly, the Ag-embedded SnO2 nanoporous thin film shows outstanding bifunctional oxygen electrochemical performance (oxygen reduction and evolution reactions) that is considered a promising candidate for use in metal-air batteries. The present technique has a wide range of applications for the preparation of other carbon-free electrocatalytic nanoporous films that could be useful for renewable energy production and storage applications.

Cobalt nanoparticles embedded in nitrogen-doped carbon for the hydrogen evolution reaction.

There is great interest in renewable and sustainable energy research to develop low-cost, highly efficient, and stable electrocatalysts as alternatives to replace Pt-based catalysts for the hydrogen evolution reaction (HER). Though nanoparticles encapsulated in carbon shells have been widely used to improve the electrode performances in energy storage devices (e.g., lithium ion batteries), they have attracted less attention in energy-related electrocatalysis. Here we report the synthesis of nitrogen-enriched core-shell structured cobalt-carbon nanoparticles dispersed on graphene sheets and we investigate their HER performances in both acidic and basic media. These catalysts exhibit excellent durability and HER activities with onset overpotentials as low as ∼70 mV in both acidic (0.5 M H2SO4) and alkaline (0.1 M NaOH) electrolytes, and the overpotentials needed to deliver 10 mA cm(-2) are determined to be 265 mV in acid and 337 mV in base, further demonstrating their potential to replace Pt-based catalysts. Control experiments reveal that the active sites for HER might come from the synergistic effects between the cobalt nanoparticles and nitrogen-doped carbon.

Asphalt-derived high surface area activated porous carbons for carbon dioxide capture.

Research activity toward the development of new sorbents for carbon dioxide (CO2) capture have been increasing quickly. Despite the variety of existing materials with high surface areas and high CO2 uptake performances, the cost of the materials remains a dominant factor in slowing their industrial applications. Here we report preparation and CO2 uptake performance of microporous carbon materials synthesized from asphalt, a very inexpensive carbon source. Carbonization of asphalt with potassium hydroxide (KOH) at high temperatures (>600 °C) yields porous carbon materials (A-PC) with high surface areas of up to 2780 m(2) g(-1) and high CO2 uptake performance of 21 mmol g(-1) or 93 wt % at 30 bar and 25 °C. Furthermore, nitrogen doping and reduction with hydrogen yields active N-doped materials (A-NPC and A-rNPC) containing up to 9.3% nitrogen, making them nucleophilic porous carbons with further increase in the Brunauer-Emmett-Teller (BET) surface areas up to 2860 m(2) g(-1) for A-NPC and CO2 uptake to 26 mmol g(-1) or 114 wt % at 30 bar and 25 °C for A-rNPC. This is the highest reported CO2 uptake among the family of the activated porous carbonaceous materials. Thus, the porous carbon materials from asphalt have excellent properties for reversibly capturing CO2 at the well-head during the extraction of natural gas, a naturally occurring high pressure source of CO2. Through a pressure swing sorption process, when the asphalt-derived material is returned to 1 bar, the CO2 is released, thereby rendering a reversible capture medium that is highly efficient yet very inexpensive.

Edge-oriented MoS2 nanoporous films as flexible electrodes for hydrogen evolution reactions and supercapacitor devices.

A simple method to fabricate edge-oriented MoS2 films with sponge-like morphologies is demonstrated. They are directly fabricated through the reaction of sulfur vapor with anodically formed Mo oxide sponge-like films on flexible Mo substrates. The edge-oriented MoS2 film delivers excellent hydrogen evolution reaction (HER) activity with enhanced kinetics and long-term cycling stability. The material also has superior energy-storage performance when working as a flexible, all-solid-state supercapacitor device.

Efficient electrocatalytic oxygen evolution on amorphous nickel-cobalt binary oxide nanoporous layers.

Nanoporous Ni-Co binary oxide layers were electrochemically fabricated by deposition followed by anodization, which produced an amorphous layered structure that could act as an efficient electrocatalyst for water oxidation. The highly porous morphologies produced higher electrochemically active surface areas, while the amorphous structure supplied abundant defect sites for oxygen evolution. These Ni-rich (10-40 atom % Co) binary oxides have an increased active surface area (roughness factor up to 17), reduced charge transfer resistance, lowered overpotential (∼325 mV) that produced a 10 mA cm(-2) current density, and a decreased Tafel slope (∼39 mV decade(-1)). The present technique has a wide range of applications for the preparation of other binary or multiple-metals or metal oxides nanoporous films. Fabrication of nanoporous materials using this method could provide products useful for renewable energy production and storage applications.

Hydrothermally formed three-dimensional nanoporous Ni(OH)2 thin-film supercapacitors.

A three-dimensional nanoporous Ni(OH)2 thin-film was hydrothermally converted from an anodically formed porous layer of nickel fluoride/oxide. The nanoporous Ni(OH)2 thin-films can be used as additive-free electrodes for energy storage. The nanoporous layer delivers a high capacitance of 1765 F g(-1) under three electrode testing. After assembly with porous activated carbon in asymmetric supercapacitor configurations, the devices deliver superior supercapacitive performances with capacitance of 192 F g(-1), energy density of 68 Wh kg(-1), and power density of 44 kW kg(-1). The wide working potential window (up to 1.6 V in 6 M aq KOH) and stable cyclability (∼90% capacitance retention over 10,000 cycles) make the thin-film ideal for practical supercapacitor devices.

Graphene nanoribbon/V2O5 cathodes in lithium-ion batteries.

Nanocrystalline V2O5 particles were successfully entrapped by graphene nanoribbons (GNRs) derived from unzipped carbon nanotubes. The electrical conductivity of V2O5 nanoparticles was enhanced after introducing the GNRs. The 3-dimensional conductive framework in the composites plays a significant role in improving the rate performance and cyclability of the material when used as a cathode in lithium-ion batteries. By tailoring the mass ratio between the GNRs and the V2O5 nanoparticles, the fabricated composites can deliver a high capacity of 278 mAh g(-1) at 0.1 C, which is close to its theoretical value, whereas a capacity of 165 mAh g(-1) can be maintained at 2 C. The delivered capacity at 0.1 C can maintain 78% of its initial capacity after 100 cycles.

Enhanced cycling stability of lithium sulfur batteries using sulfur-polyaniline-graphene nanoribbon composite cathodes.

A hierarchical nanocomposite material of graphene nanoribbons combined with polyaniline and sulfur using an inexpensive, simple method has been developed. The resulting composite, characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron microscopy, and X-ray diffraction analysis, has a good rate performance and excellent cycling stability. The synergistic combination of electrically conductive graphene nanoribbons, polyaniline, and sulfur produces a composite with high performance. The method developed here is practical for the large-scale development of cathode materials for lithium sulfur batteries.

Three-dimensional thin film for lithium-ion batteries and supercapacitors.

Three-dimensional heterogeneously nanostructured thin-film electrodes were fabricated by using Ta2O5 nanotubes as a framework to support carbon-onion-coated Fe2O3 nanoparticles along the surface of the nanotubes. Carbon onion layers function as microelectrodes to separate the two different metal oxides and form a nanoscale 3-D sandwich structure. In this way, space-charge layers were formed at the phase boundaries, and it provides additional energy storage by charge separation. These 3-D nanostructured thin films deliver both excellent Li-ion battery properties (stabilized at 800 mAh cm(­3)) and supercapacitor (up to 18.2 mF cm(­2)) performance owing to the synergistic effects of the heterogeneous structure. Thus, Li-ion batteries and supercapacitors are successfully assembled into the same electrode, which is promising for next generation hybrid energy storage and delivery devices.

Three-dimensional nanoporous Fe2O3/Fe3C-graphene heterogeneous thin films for lithium-ion batteries.

Three-dimensional self-organized nanoporous thin films integrated into a heterogeneous Fe2O3/Fe3C-graphene structure were fabricated using chemical vapor deposition. Few-layer graphene coated on the nanoporous thin film was used as a conductive passivation layer, and Fe3C was introduced to improve capacity retention and stability of the nanoporous layer. A possible interfacial lithium storage effect was anticipated to provide additional charge storage in the electrode. These nanoporous layers, when used as an anode in lithium-ion batteries, deliver greatly enhanced cyclability and rate capacity compared with pristine Fe2O3: a specific capacity of 356 µAh cm(-2) µm(-1) (3560 mAh cm(-3) or ∼1118 mAh g(-1)) obtained at a discharge current density of 50 µA cm(-2) (∼0.17 C) with 88% retention after 100 cycles and 165 µAh cm(-2) µm(-1) (1650 mAh cm(-3) or ∼518 mAh g(-1)) obtained at a discharge current density of 1000 µA cm(-2) (∼6.6 C) for 1000 cycles were achieved. Meanwhile an energy density of 294 µWh cm(-2) µm(-1) (2.94 Wh cm(-3) or ∼924 Wh kg(-1)) and power density of 584 µW cm(-2) µm(-1) (5.84 W cm(-3) or ∼1834 W kg(-1)) were also obtained, which may make these thin film anodes promising as a power supply for micro- or even nanosized portable electronic devices.