Finerenone Added to RAS/SGLT2 Blockade for CKD in Alport Syndrome. Results of a Randomized Controlled Trial with Col4a3-/- Mice.

SIGNIFICANCE STATEMENT: We hypothesized that triple therapy with inhibitors of the renin-angiotensin system (RAS), sodium-glucose transporter (SGLT)-2, and the mineralocorticoid receptor (MR) would be superior to dual RAS/SGLT2 blockade in attenuating CKD progression in Col4a3 -deficient mice, a model of Alport syndrome. Late-onset ramipril monotherapy or dual ramipril/empagliflozin therapy attenuated CKD and prolonged overall survival by 2 weeks. Adding the nonsteroidal MR antagonist finerenone extended survival by 4 weeks. Pathomics and RNA sequencing revealed significant protective effects on the tubulointerstitium when adding finerenone to RAS/SGLT2 inhibition. Thus, triple RAS/SGLT2/MR blockade has synergistic effects and might attenuate CKD progression in patients with Alport syndrome and possibly other progressive chronic kidney disorders. BACKGROUND: Dual inhibition of the renin-angiotensin system (RAS) plus sodium-glucose transporter (SGLT)-2 or the mineralocorticoid receptor (MR) demonstrated additive renoprotective effects in large clinical trials. We hypothesized that triple therapy with RAS/SGLT2/MR inhibitors would be superior to dual RAS/SGLT2 blockade in attenuating CKD progression. METHODS: We performed a preclinical randomized controlled trial (PCTE0000266) in Col4a3 -deficient mice with established Alport nephropathy. Treatment was initiated late (age 6 weeks) in mice with elevated serum creatinine and albuminuria and with glomerulosclerosis, interstitial fibrosis, and tubular atrophy. We block-randomized 40 male and 40 female mice to either nil (vehicle) or late-onset food admixes of ramipril monotherapy (10 mg/kg), ramipril plus empagliflozin (30 mg/kg), or ramipril plus empagliflozin plus finerenone (10 mg/kg). Primary end point was mean survival. RESULTS: Mean survival was 63.7±10.0 days (vehicle), 77.3±5.3 days (ramipril), 80.3±11.0 days (dual), and 103.1±20.3 days (triple). Sex did not affect outcome. Histopathology, pathomics, and RNA sequencing revealed that finerenone mainly suppressed the residual interstitial inflammation and fibrosis despite dual RAS/SGLT2 inhibition. CONCLUSION: Experiments in mice suggest that triple RAS/SGLT2/MR blockade may substantially improve renal outcomes in Alport syndrome and possibly other progressive CKDs because of synergistic effects on the glomerular and tubulointerstitial compartments.

Decentralized collaborative multi-institutional PET attenuation and scatter correction using federated deep learning.

PURPOSE: Attenuation correction and scatter compensation (AC/SC) are two main steps toward quantitative PET imaging, which remain challenging in PET-only and PET/MRI systems. These can be effectively tackled via deep learning (DL) methods. However, trustworthy, and generalizable DL models commonly require well-curated, heterogeneous, and large datasets from multiple clinical centers. At the same time, owing to legal/ethical issues and privacy concerns, forming a large collective, centralized dataset poses significant challenges. In this work, we aimed to develop a DL-based model in a multicenter setting without direct sharing of data using federated learning (FL) for AC/SC of PET images. METHODS: Non-attenuation/scatter corrected and CT-based attenuation/scatter corrected (CT-ASC) 18F-FDG PET images of 300 patients were enrolled in this study. The dataset consisted of 6 different centers, each with 50 patients, with scanner, image acquisition, and reconstruction protocols varying across the centers. CT-based ASC PET images served as the standard reference. All images were reviewed to include high-quality and artifact-free PET images. Both corrected and uncorrected PET images were converted to standardized uptake values (SUVs). We used a modified nested U-Net utilizing residual U-block in a U-shape architecture. We evaluated two FL models, namely sequential (FL-SQ) and parallel (FL-PL) and compared their performance with the baseline centralized (CZ) learning model wherein the data were pooled to one server, as well as center-based (CB) models where for each center the model was built and evaluated separately. Data from each center were divided to contribute to training (30 patients), validation (10 patients), and test sets (10 patients). Final evaluations and reports were performed on 60 patients (10 patients from each center). RESULTS: In terms of percent SUV absolute relative error (ARE%), both FL-SQ (CI:12.21-14.81%) and FL-PL (CI:11.82-13.84%) models demonstrated excellent agreement with the centralized framework (CI:10.32-12.00%), while FL-based algorithms improved model performance by over 11% compared to CB training strategy (CI: 22.34-26.10%). Furthermore, the Mann-Whitney test between different strategies revealed no significant differences between CZ and FL-based algorithms (p-value > 0.05) in center-categorized mode. At the same time, a significant difference was observed between the different training approaches on the overall dataset (p-value < 0.05). In addition, voxel-wise comparison, with respect to reference CT-ASC, exhibited similar performance for images predicted by CZ (R2 = 0.94), FL-SQ (R2 = 0.93), and FL-PL (R2 = 0.92), while CB model achieved a far lower coefficient of determination (R2 = 0.74). Despite the strong correlations between CZ and FL-based methods compared to reference CT-ASC, a slight underestimation of predicted voxel values was observed. CONCLUSION: Deep learning-based models provide promising results toward quantitative PET image reconstruction. Specifically, we developed two FL models and compared their performance with center-based and centralized models. The proposed FL-based models achieved higher performance compared to center-based models, comparable with centralized models. Our work provided strong empirical evidence that the FL framework can fully benefit from the generalizability and robustness of DL models used for AC/SC in PET, while obviating the need for the direct sharing of datasets between clinical imaging centers.

Differential privacy preserved federated transfer learning for multi-institutional 68Ga-PET image artefact detection and disentanglement.

PURPOSE: Image artefacts continue to pose challenges in clinical molecular imaging, resulting in misdiagnoses, additional radiation doses to patients and financial costs. Mismatch and halo artefacts occur frequently in gallium-68 (68Ga)-labelled compounds whole-body PET/CT imaging. Correcting for these artefacts is not straightforward and requires algorithmic developments, given that conventional techniques have failed to address them adequately. In the current study, we employed differential privacy-preserving federated transfer learning (FTL) to manage clinical data sharing and tackle privacy issues for building centre-specific models that detect and correct artefacts present in PET images. METHODS: Altogether, 1413 patients with 68Ga prostate-specific membrane antigen (PSMA)/DOTA-TATE (TOC) PET/CT scans from 3 countries, including 8 different centres, were enrolled in this study. CT-based attenuation and scatter correction (CT-ASC) was used in all centres for quantitative PET reconstruction. Prior to model training, an experienced nuclear medicine physician reviewed all images to ensure the use of high-quality, artefact-free PET images (421 patients' images). A deep neural network (modified U2Net) was trained on 80% of the artefact-free PET images to utilize centre-based (CeBa), centralized (CeZe) and the proposed differential privacy FTL frameworks. Quantitative analysis was performed in 20% of the clean data (with no artefacts) in each centre. A panel of two nuclear medicine physicians conducted qualitative assessment of image quality, diagnostic confidence and image artefacts in 128 patients with artefacts (256 images for CT-ASC and FTL-ASC). RESULTS: The three approaches investigated in this study for 68Ga-PET imaging (CeBa, CeZe and FTL) resulted in a mean absolute error (MAE) of 0.42 ± 0.21 (CI 95%: 0.38 to 0.47), 0.32 ± 0.23 (CI 95%: 0.27 to 0.37) and 0.28 ± 0.15 (CI 95%: 0.25 to 0.31), respectively. Statistical analysis using the Wilcoxon test revealed significant differences between the three approaches, with FTL outperforming CeBa and CeZe (p-value < 0.05) in the clean test set. The qualitative assessment demonstrated that FTL-ASC significantly improved image quality and diagnostic confidence and decreased image artefacts, compared to CT-ASC in 68Ga-PET imaging. In addition, mismatch and halo artefacts were successfully detected and disentangled in the chest, abdomen and pelvic regions in 68Ga-PET imaging. CONCLUSION: The proposed approach benefits from using large datasets from multiple centres while preserving patient privacy. Qualitative assessment by nuclear medicine physicians showed that the proposed model correctly addressed two main challenging artefacts in 68Ga-PET imaging. This technique could be integrated in the clinic for 68Ga-PET imaging artefact detection and disentanglement using multicentric heterogeneous datasets.

Deep Learning-based Non-rigid Image Registration for High-dose Rate Brachytherapy in Inter-fraction Cervical Cancer.

In this study, an inter-fraction organ deformation simulation framework for the locally advanced cervical cancer (LACC), which considers the anatomical flexibility, rigidity, and motion within an image deformation, was proposed. Data included 57 CT scans (7202 2D slices) of patients with LACC randomly divided into the train (n = 42) and test (n = 15) datasets. In addition to CT images and the corresponding RT structure (bladder, cervix, and rectum), the bone was segmented, and the coaches were eliminated. The correlated stochastic field was simulated using the same size as the target image (used for deformation) to produce the general random deformation. The deformation field was optimized to have a maximum amplitude in the rectum region, a moderate amplitude in the bladder region, and an amplitude as minimum as possible within bony structures. The DIRNet is a convolutional neural network that consists of convolutional regressors, spatial transformation, as well as resampling blocks. It was implemented by different parameters. Mean Dice indices of 0.89 ± 0.02, 0.96 ± 0.01, and 0.93 ± 0.02 were obtained for the cervix, bladder, and rectum (defined as at-risk organs), respectively. Furthermore, a mean average symmetric surface distance of 1.61 ± 0.46 mm for the cervix, 1.17 ± 0.15 mm for the bladder, and 1.06 ± 0.42 mm for the rectum were achieved. In addition, a mean Jaccard of 0.86 ± 0.04 for the cervix, 0.93 ± 0.01 for the bladder, and 0.88 ± 0.04 for the rectum were observed on the test dataset (15 subjects). Deep learning-based non-rigid image registration is, therefore, proposed for the high-dose-rate brachytherapy in inter-fraction cervical cancer since it outperformed conventional algorithms.

Fracture strength and three-dimensional marginal evaluation of biocompatible high-performance polymer versus pressed lithium disilicate crowns.

STATEMENT OF PROBLEM: Despite the acceptable physical properties of biocompatible high-performance polymer (BioHPP), little is known about the marginal accuracy and fracture strength of restorations made from this material. PURPOSE: This in vitro study assessed the marginal and internal adaptation and fracture strength of teeth restored with lithium disilicate (LD) ceramics and BioHPP monolithic crowns. MATERIAL AND METHODS: Twenty-four extracted premolars were prepared for complete coverage crowns and divided into 2 groups to receive pressed IPS e.max LD, or computer-aided design and computer-aided manufacturing (CAD-CAM) BioHPP monolithic crowns. After adhesive cementation, the marginal and internal adaptations of the restorations were evaluated by microcomputed tomography at 18 points for each crown. Specimens were subjected to 6000 thermal cycles at 5 °C and 55 °C and 200 000 load cycles of 100 N at a frequency of 1.2 Hz. The fracture strength of the restorations was then measured in a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed via an independent-sample t-test (α=.05). RESULTS: The mean ±standard deviation of marginal gap was 138.8 ±43.6 µm for LD and 242.1 ±70.7 µm for BioHPP groups (P=.001). The mean ±standard deviation value of absolute marginal discrepancy was 193.8 ±60.8 µm for LD and 263.5 ±97.6 µm for BioHPP groups (P=.06). The internal occlusal and axial gap measurements were 547.5 ±253.1 µm and 197.3 ±54.8 µm for LD (P=.03) and 360 ±62.9 µm and 152.8 ±44.8 µm for BioHPP (P=.04). The mean ±standard deviation of internal space volume was 15.3 ±11.8 µm³ for LD and 24.1 ±10.7 µm³ for BioHPP (P=.08). The mean ±standard deviation of fracture strength was 2509.8 ±680 N for BioHPP and 1090.4 ±454.2 MPa for LD groups (P<.05). CONCLUSIONS: The marginal adaptation of pressed lithium disilicate crowns was better, while BioHPP crowns displayed greater fracture strength. Marginal gap width was not correlated with fracture strength in either group.

Recommendations on compiling test datasets for evaluating artificial intelligence solutions in pathology.

Artificial intelligence (AI) solutions that automatically extract information from digital histology images have shown great promise for improving pathological diagnosis. Prior to routine use, it is important to evaluate their predictive performance and obtain regulatory approval. This assessment requires appropriate test datasets. However, compiling such datasets is challenging and specific recommendations are missing. A committee of various stakeholders, including commercial AI developers, pathologists, and researchers, discussed key aspects and conducted extensive literature reviews on test datasets in pathology. Here, we summarize the results and derive general recommendations on compiling test datasets. We address several questions: Which and how many images are needed? How to deal with low-prevalence subsets? How can potential bias be detected? How should datasets be reported? What are the regulatory requirements in different countries? The recommendations are intended to help AI developers demonstrate the utility of their products and to help pathologists and regulatory agencies verify reported performance measures. Further research is needed to formulate criteria for sufficiently representative test datasets so that AI solutions can operate with less user intervention and better support diagnostic workflows in the future.

The effect of different finishing polishing protocols on stain absorption and color stability of resin composite restorations.

PURPOSE: To evaluate the degree of stain absorption of resin composite following different finishing and polishing protocols and to evaluate the efficacy of prophylaxis paste with or without addition of carbamide peroxide to remove composite surface stain. METHODS: 50 resin composite blocks were prepared using nano-hybrid composite (Filtek Z250XT) and giomer (Beautifil II LS). Specimens were either polished with a disk or coated with 5th/7th generation bonding or glycerin gel. The color parameters (lightness, chroma and hue) of the specimens were measured prior to staining, and after 1 and 2 weeks of staining using a color chromometer. The composite surface stain removal capability of prophylaxis pastes with or without the addition of carbamide peroxide was evaluated before and after polishing. RESULTS: The repeated measures ANOVA showed that composite polished with a polishing disk or coated with glycerin gel have better color stability compared to composite without any polishing or coated with 5th or 7th generation bonding materials. The prophylaxis paste was able to remove composite surface stain; however, the addition of carbamide peroxide did not show any additional benefit. The results suggested that polishing with polishing disks or coating with glycerin gel is useful for the color stability of resin composite. CLINICAL SIGNIFICANCE: Selection of finishing and polishing protocols varies among individual practitioners. Each of these protocols has some pros and cons concerning the esthetic and color stability of composite. The present results suggested that the use of polishing disk or glycerin gel during polymerization would be a useful protocol to achieve and maintain esthetically stable composite restorations.

SARS-CoV-2 and Stroke Characteristics: A Report From the Multinational COVID-19 Stroke Study Group.

[Figure: see text].

Evaluation of Internal Fit and Marginal Adaptation of Provisional Crowns Fabricated with Three Different Techniques.

Different techniques have been used to construct provisional crowns to protect prepared teeth. The purpose of this in vitro study was to assess the internal fit and marginal discrepancy of provisional crowns made by different methods. A total of 48 provisional crowns were constructed and divided into three groups (n = 16) according to the fabrication methods: fabricated manually-group MAN; computer-aided design/computer aided manufacturing technology-group CAM; and 3-dimensional (3D)-printed technology-group 3DP. The same standard tessellation language (STL) file was used for both CAD/CAM and 3D-printed group. The silicone-checked method was used to measure the internal gap distance. The marginal discrepancy was measured by using the polyvinyl siloxane (PVS) replica method and swept-source optical coherence tomography (OCT) scanning technique. Data were analyzed with one-way analysis of variance (ANOVA) nonparametric Kruskal-Wallis and Tukey tests at α = 0.05. At the central pit and axial walls, the gap distance mean values of group CAM were higher than those from group MAN and 3DP. The group 3DP was statistically significantly higher in gap distance at the location of occlusion than group MAN and group CAM (p < 0.05). The total gap distances assessed by silicone-checked method revealed there were no statistically significant differences between the tested groups (p > 0.05). The total mean values of absolute and horizontal marginal discrepancy of the group 3DP obtained by using the PVS-replica method and OCT scanning technique were significantly higher than the group MAN and CAM (p < 0.05). Regression correlation results of marginal discrepancy indicated a positive correlation (r = 0.902) between PVS-replica method and OCT scanning technique. The manually fabricated provisional crowns presented better internal fit and a smaller marginal discrepancy. Between different assessment techniques for marginal adaptation, PVS-replica method and OCT scanning technique have a positive correlation.

Optical Coherence Tomography for Patients with Developmental Disabilities: A Preliminary Study.

Dental radiographs are essential for diagnosis and treatment planning, but are sometimes difficult to acquire for patients with developmental disabilities (PDD). Optical Coherence Tomography (OCT) is a non-ionizing imaging modality that has the potential application as an alternative to dental radiographs for PDD. This study aimed to determine the feasibility of intraoral OCT imaging for PDD. Ten participants were recruited in the Dental Education in the Care of Persons with Disabilities (DECOD) Clinic to explore the utility of dental OCT. The prototype system (Yoshida Dental) creates in-depth and three-dimensional images of teeth. The participants indicated their degree of pain during imaging on the Wong-Baker FACES Pain Rating Scale, and the degree of discomfort after imaging on a visual analog scale. OCT can be used for patients with developmental disabilities with minimal levels of pain and discomfort, without ionizing radiation.

Evaluation of Mechanical and Physical Properties of Light and Heat Polymerized UDMA for DLP 3D Printer.

The aims of this study were to investigate the feasibility of using a DLP 3D printer to fabricate a crown using scan data before tooth preparation, and to investigate the effect of additional heat curing on the mechanical properties of the urethane dimethacrylate (UDMA)-based 3D printed crown. A silicone fitting test was used to evaluate the internal adaptation of the crown. For ultimate tensile strength (UTS), the specimens were tested after 24 h storage in water at 37 °C or after 10,000 thermal cycles (TC) between 5-55 °C. For shear bond strength (SBS), a PMMA self-curing resin was filled into a Teflon ring mounted onto the polished UDMA specimens. The internal adaptation of the crowns fabricated with cement space was better than those with no cement space. There was no significant difference in UTS between light-curing and additional heat-curing groups after TC. As for the SBS, there was a significant difference after TC between the two groups. Crowns can be fabricated by a DLP 3D printer using pre-preparation scans with a cement space defined in the software. Additional heat curing of the UDMA-based crown reduced residual monomer and improved its mechanical properties.

Microcomputed tomography evaluation of cement shrinkage under zirconia versus lithium disilicate veneers.

STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the improved translucency of recently developed high-strength monolithic zirconia could make them clinically acceptable for veneers if bonding to zirconia was as predictable as to glass-ceramics. Few studies have compared how resin cements behave between glass-ceramic and zirconia veneers before and after polymerization. PURPOSE: The purpose of this in vitro study was to evaluate the volumetric polymerization shrinkage of resin cement, marginal discrepancy, and cement thickness before and after polymerization for glass-ceramic and zirconia veneers with light-polymerizing resin cement. MATERIAL AND METHODS: Ten lithium disilicate veneers and 10 zirconia veneers were fabricated with a CAD-CAM workflow on extracted human maxillary anterior teeth with intact enamel surfaces. Zirconia veneers were treated with airborne-particle abrasion, and lithium disilicate veneers were etched with 5% hydrofluoric acid. All specimens were treated with ceramic primer and cemented with a light-polymerized resin cement. All specimens were scanned before and after resin cement polymerization by microcomputed tomography. The data were processed by the Amira software program to compare polymerization volumetric shrinkage, cement thickness, and marginal discrepancy. The data were compared by using a t test and analysis of variance (α=.05). Two bonded veneers were loaded in a mastication simulator for 400 000 cycles to investigate the effect of cyclic fatigue loading. RESULTS: Mean volumetric polymerization shrinkage was 4.2 ±0.8% for the lithium disilicate group and 6.4 ±3.5% for the zirconia group. No significant difference was found for volumetric shrinkage between materials (P=.132). The mean ±standard deviations of the marginal discrepancies before and after polymerization were 178 ±41 µm and 158 ±37 µm for lithium disilicate and 115 ±33 µm and 107 ±32 µm for zirconia. A smaller marginal discrepancy was found for both materials after polymerization (P=.011) and for zirconia compared with lithium disilicate (P=.004). The mean ±standard deviation cement thickness values before and after polymerization were 157 ±27 µm and 147 ±27 µm for lithium disilicate and 162 ±53 µm and 147 ±52 µm for zirconia. Smaller cement thickness was found after polymerization (P<.001), whereas no significant difference was found in cement thickness between materials (P=.144). No changes were noted in marginal discrepancy and cement thickness as a result of the fatigue loading. CONCLUSIONS: The difference in the volumetric polymerization shrinkage of cement between lithium disilicate and zirconia veneers was not statistically significant. Polymerization shrinkage resulted in smaller marginal discrepancy and cement thickness for both veneer materials.

Diagnosis of Occlusal Tooth Wear Using 3D Imaging of Optical Coherence Tomography Ex Vivo.

The aim of this study was to assess the utility of 3D imaging of optical coherence tomography (OCT) for the diagnosis of occlusal tooth wear ex vivo. Sixty-three extracted human molars with or without visible tooth wear were collected to take digital intraoral radiography and 3D OCT images. The degree of tooth wear was evaluated by 12 examiners and scored using 4-rank scale: 1-slight enamel wear; 2-distinct enamel wear; 3-tooth wear with slight dentin exposure; 4-tooth wear with distinct involvement of dentin. The degree of tooth wear was validated by the histological view of confocal laser scanning microscopy (CLSM). The sensitivity, specificity, and area under the curve (AUC) of receiver operating characteristic analysis were calculated. Diagnostic accuracy was compared with the agreement with CLSM observation using weighted kappa. The results were statistically analyzed at a significance level of α = 0.05. Three-dimensional OCT showed significantly higher sensitivity (p < 0.05) for all the diagnostic thresholds of enamel wear and dentin exposure than digital radiography (0.82, 0.85, and 0.79 vs. 0.56, 0.52, and 0.57, respectively). Three-dimensional OCT showed higher AUC and kappa coefficients than digital radiography (p < 0.05), where mean AUC and Kappa values were 0.95 and 0.76 for OCT and 0.92 and 0.47 for radiography, respectively. No significant difference of specificity was observed (p > 0.05). Three-dimensional OCT could visualize and estimate the degree of tooth wear and detect the dentin exposure at the tooth wear surface accurately and reproducibly. Consequently, a new guideline for tooth wear assessment can be proposed using OCT.

Accuracy of CAD/CAM Digital Impressions with Different Intraoral Scanner Parameters.

The advancement of intraoral scanners has allowed for more efficient workflow in the dental clinical setting. However, limited data exist regarding the accuracy of the digital impressions produced with various scanner settings and scanning approaches. The purpose of this in vitro study was to compare the accuracy of digital impressions at the crown preparation margin using different scanning resolutions of a specific intraoral scanner system. An all-ceramic crown preparation of a mandibular first molar was constructed in a typodont, and a scan (n = 3) was created with an industrial-grade laboratory scanner (3Shape D2000) as the control. Digital impressions were obtained with an intraoral scanner (3Shape TRIOS 3) under three settings-high resolution (HR), standard resolution (SR), and combined resolution (SHR). Comparative 3D analysis of scans was performed with Geomagic Control X software to measure the discrepancy between intraoral scans and the control scan along the preparation finish line. The scan time and number of images captured per scan were recorded. Statistical analysis was performed by one-way ANOVA, two-way repeated measures ANOVA, Pearson's correlation, and Dunnett's T3 test (α = 0.05). Significant differences were observed for scan time and for number of images captured among scan resolution settings (α < 0.05). The scan time for the SR group was, on average, 34.2 s less than the SHR group and 46.5 s less than the HR group. For discrepancy on the finish line, no significant differences were observed among scanning resolutions (HR: 31.5 ± 5.5 µm, SHR: 33.2 ± 3.7 µm, SR: 33.6 ± 3.1 µm). Significant differences in discrepancy were observed among tooth surfaces, with the distal surface showing the highest discrepancies. In conclusion, the resolution of the intra-oral scanner is primarily defined by the system hardware and optimized for default scans. A software high-resolution mode that obtains more data over a longer time may not necessarily benefit the scan accuracy, while the tooth preparation and surface parameters do affect the accuracy.

Diagnosis of Occlusal Caries with Dynamic Slicing of 3D Optical Coherence Tomography Images.

Detecting the extent of occlusal caries is a clinically important but challenging task required for treatment decision making. The aim of this study was to assess the diagnostic power of 3D swept-source optical coherence tomography (OCT) for evaluation of occlusal caries in comparison with X-ray radiography. Extracted human molars not exhibiting American Dental Association (ADA) criteria advanced caries were mounted in a silicone block and digital dental radiographs were captured from the buccal side. Subsequently, occlusal surfaces were scanned with a prototype Yoshida Dental OCT. Thirteen examiners evaluated the presence and extent of caries on radiographs and dynamically sliced 3D OCT video images, using a 4 level scale-0: intact; 1: enamel demineralization without cavitation; 2: enamel caries with cavitation; 3: dentin caries with or without cavitation. Sensitivity, specificity and area under operating characteristic curves (Az) were statistically analyzed (α = 0.05). Reliability analysis showed an excellent agreement among the 13 examiners for both methods. The OCT presented a significantly higher sensitivity and Az value for the detection of caries compared to radiographs (p < 0.05). Radiography showed especially low sensitivity for dentin caries (0-2 versus 3). Dynamic slicing of 3D OCT volumes is a powerful adjunct tool to visual inspection to diagnose the dentin occlusal caries in vitro.

Efficacy of Various Surface Treatments on the Bonding Performance of Saliva-contaminated Lithium-Disilicate Ceramics.

PURPOSE: To investigate the efficacy of different ceramic surface cleaning methods after saliva contamination on the resin bond strength to lithium disilicate ceramics. MATERIALS AND METHODS: 300 e.max CAD blocks (Ivoclar Vivadent) were polished with 600-grit silicon carbide paper and divided into five groups with or without human saliva contamination and according to the surface treatment performed (n = 10); control: no pretreatment; MP: Monobond Plus; PA+MP: 37% phosphoric acid (PA) followed by MP; HF+MP: 5% hydrofluoric acid (HF) followed by MP; MEP: Monobond Etch & Prime. The specimens were bonded with one of three resin cements: Variolink Esthetic DC (VE), Multilink Automix (MA) and Speed CEM (SC). After 24-h water storage, tensile bond strength (TBS) was measured. The ceramic surfaces after pretreatment were analyzed using x-ray photoelectron spectroscopy (XPS). RESULTS: XPS analysis showed similar elemental distributions between saliva contamination vs no saliva in PA, HF, and MEP. The TBSs were significantly influenced by surface treatments (p < 0.05). HF+MP and MEP showed statistically non-significantly different bond strengths to saliva-contaminated HF+MP and MEP, but were different from MP and saliva-contaminated MP. The TBSs after 24 h were significantly higher in HF+MP and MEP groups with VE. HF+MP and MEP did not show statistically significant differences among any groups with or without saliva contamination. CONCLUSION: Surface treatments with PA or HF followed by silane or by MEP alone were effective in removing saliva contamination and enhancing the resin bond strength.

Remineralization capacity of carious and non-carious white spot lesions: clinical evaluation using ICDAS and SS-OCT.

OBJECTIVES: To assess the remineralization capacity of carious, non-carious, and combined white spot lesions (WSLs) using the ICDAS and SS-OCT. MATERIALS AND METHODS: This clinical trial was based on a quasi-experimental design. Forty-two healthy subjects (median age 26.6 years), who visited university hospital and had at least one WSL with an ICDAS score of 2 or 1, were recruited. The subjects chewed a non-blind sugar-free gum containing bioavailable calcium and fluoride for 3 months. The remineralization capacities of carious and non-carious 121 WSLs were assessed using ICDAS by two calibrated non-blind examiners and optical boundary depth (BD) by SS-OCT at a monthly recall. The outcome variables, transitions of ICDAS score, mean BD, and mean BD recovery rate (RR%), were statistically analyzed using the chi-square test, two way-repeated measures ANOVA, and Wilcoxon rank sum test, respectively (alpha = 0.05). RESULTS: Based on the visual inspection, OCT images at the baseline, 72 WSLs were purely carious, 20 were non-carious (developmental) lesions, while 29 were combined (carious-developmental). The responses of WSLs over time showed to be highly variable. There was a significant difference in transitions of ICDAS scores after 3 months between carious and non-carious WSLs (p < 0.05) and non-carious and combined WSLs (p < 0.05). Carious and combined WSLs underwent significant changes in the mean BD between baseline (161.8 ± 56.8 µm) and 2 months (130.7 ± 57.4 µm) or 3 months (119.1 ± 57.5 µm) (p < 0.05), while there was no significant difference between baseline (132.2 ± 26.2 µm) and 2 months (122.8 ± 24.1 µm) or 3 months (119.8 ± 22.6 µm) in non-carious WSLs (p > 0.05). There was a significant difference in mean RR% after 2 and 3 months between carious and non-carious WSLs (p < 0.05). CONCLUSIONS: The remineralization capacity of WSL was variable among the cases and subjects, and depended on the WSLs history, etiology (carious, non-carious, or combined lesion) and structure (histological pattern). CLINICAL RELEVANCE: Carious WSLs showed the highest remineralization potential.

Microcomputed Tomography Evaluation of Root Dentin Caries Prevention by Topical Fluorides and Potassium Iodide.

The mineral content of dental hard tissues has traditionally been measured by destructive tests such as transverse microradiography. Microfocus X-ray computed tomography (micro CT) has enabled non-destructive 3D assessment of tooth demineralization. This study compared the preventive effects of silver diammine fluoride (SDF) and potassium iodide (KI) in comparison with fluoride varnish. SDF has been known to arrest caries but darkens the tooth. KI creates a precipitate with SDF that reduces the discoloration, but its effects on SDF efficacy in terms of preventing demineralization of at-risk root dentin surfaces is unknown. Bovine root dentin blocks were randomly distributed into four groups and subjected to a pretreatment in each group (n = 8); Control: deionized water (DIW); F-Varnish: 5% sodium fluoride varnish: 38% Saforide; SDF+KI: SDF followed by saturated solution of KI in DIW. The treated dentin was subjected to 8 cycles of demineralization (pH 5) for 14 h and remineralization in artificial saliva (pH 7) for 10 h. Specimens were then scanned for 12 min using micro CT at 73 KV and 1012 µA with 8.3 µm resolution. The 3D images were analyzed in Amira software to calculate lesion depth (LD), surface layer mineral density (SL) and mineral loss (ΔZ) for each specimen. One-way ANOVA with Bonferroni posthoc showed that there was a statistically significant difference between Control and all three other groups for all parameters (P < 0.001), however, there was no statistical difference among F-Varnish, SDF and SDF+KI (P > 0.05). Single application of F-Varnish, SDF and SDF+KI showed comparable preventive effects against root dentin demineralization. Application of KI did not affect anti-demineralization properties of SDF in this study. Micro CT is a quick and effective method for objective and high-resolution characterization of dentin caries lesions.

Near-Infrared Imaging of Artificial Enamel Caries Lesions with a Scanning Fiber Endoscope.

Several studies have shown that near-infrared imaging has great potential for the detection of dental caries lesions. A miniature scanning fiber endoscope (SFE) operating at near-infrared (NIR) wavelengths was developed and used in this study to test whether the device could be used to discriminate demineralized enamel from sound enamel. Varying depths of artificial enamel caries lesions were prepared on 20 bovine blocks with smooth enamel surfaces. Samples were imaged with a SFE operating in the reflectance mode at 1310-nm and 1460-nm in both wet and dry conditions. The measurements acquired by the SFE operating at 1460-nm show significant difference between the sound and the demineralized enamel. There was a moderate positive correlation between the SFE measurements and micro-CT measurements, and the NIR SFE was able to detect the presence of demineralization with high sensitivity (0.96) and specificity (0.85). This study demonstrates that the NIR SFE can be used to detect early demineralization from sound enamel. In addition, the NIR SFE can differentiate varying severities of demineralization. With its very small form factor and maneuverability, the NIR SFE should allow clinicians to easily image teeth from multiple viewing angles in real-time.

Effect of silver diamine fluoride and potassium iodide on bonding to demineralized dentin.

PURPOSE: To evaluate the microtensile bond strength (MTBS) of resin composite to demineralized dentin treated with SDF or SDF-KI. METHODS: Occlusal enamel of 30 caries-free extracted human molars was removed to expose flat dentin surfaces. Specimens were immersed in demineralizing solution (pH 4.5) for 7 days. A standard smear layer was created using 600-grit silicon carbide paper. Specimens were distributed into three groups (n=10). Control: Dentin rinsed with deionized water; SDF: Dentin treated with 38% SDF; and SDF-KI: Dentin treated with SDF and KI. Specimens were bonded with composite using Scotchbond Universal in etch-and-rinse mode. MTBS beams were prepared from each specimen after 24 hours and tested. Data was analyzed by one-way ANOVA with Tukey HSD post-hoc test. RESULTS: MTBS test results ranged from 0 to 40 MPa. The highest values were obtained in the Control and lowest in SDF-KI, where pre-test failures were frequently observed. One-way ANOVA showed a significant difference among groups (P< 0.005); post-hoc analysis suggested no statistical difference between Control and SDF, but both groups showed higher MTBS compared with SDF-KI. CLINICAL SIGNIFICANCE: Silver diamine fluoride can be applied precisely and regionally on demineralized dentin before bonding without compromising the bond strength of a universal adhesive used with phosphoric acid etching. Addition of potassium iodide to reduce discoloration will dramatically weaken the bond.