Resonant domain-wall-enhanced tunable microwave ferroelectrics.

Ordering of ferroelectric polarization1 and its trajectory in response to an electric field2 are essential for the operation of non-volatile memories3, transducers4 and electro-optic devices5. However, for voltage control of capacitance and frequency agility in telecommunication devices, domain walls have long been thought to be a hindrance because they lead to high dielectric loss and hysteresis in the device response to an applied electric field6. To avoid these effects, tunable dielectrics are often operated under piezoelectric resonance conditions, relying on operation well above the ferroelectric Curie temperature7, where tunability is compromised. Therefore, there is an unavoidable trade-off between the requirements of high tunability and low loss in tunable dielectric devices, which leads to severe limitations on their figure of merit. Here we show that domain structure can in fact be exploited to obtain ultralow loss and exceptional frequency selectivity without piezoelectric resonance. We use intrinsically tunable materials with properties that are defined not only by their chemical composition, but also by the proximity and accessibility of thermodynamically predicted strain-induced, ferroelectric domain-wall variants8. The resulting gigahertz microwave tunability and dielectric loss are better than those of the best film devices by one to two orders of magnitude and comparable to those of bulk single crystals. The measured quality factors exceed the theoretically predicted zero-field intrinsic limit owing to domain-wall fluctuations, rather than field-induced piezoelectric oscillations, which are usually associated with resonance. Resonant frequency tuning across the entire L, S and C microwave bands (1-8 gigahertz) is achieved in an individual device-a range about 100 times larger than that of the best intrinsically tunable material. These results point to a rich phase space of possible nanometre-scale domain structures that can be used to surmount current limitations, and demonstrate a promising strategy for obtaining ultrahigh frequency agility and low-loss microwave devices.

Negative differential resistance in armchair silicene nanoribbons.

Due to dimensional confinement of carriers and non-trivial changes in the electronic structure, novel tunable transport properties manifest in nanoscale materials. Here, we report using first-principles density functional theory and non-equilibrium Green's function formalism, the occurrence of negative differential resistance (NDR) in armchair silicene nanoribbons (ASNRs). Interestingly, NDR manifests only in pristine [Formula: see text] ASNRs, where [Formula: see text]. We show that the origin of such a novel transport phenomenon lies in the bias-induced changes in the density of states of this particular family of nanoribbons. With increasing width of the nanoribbons belonging to this family, the peak-to-valley ratios of current decrease due to the increase in the number of sub-bands leading to a reduction in NDR. NDR is possible not only in [Formula: see text] ASNRs, but also in mixed configurations of armchair and zigzag silicene nanoribbons. This universality of NDR along with its unprecedented width-induced tunability can be useful for silicene-based low-power logic and memory applications.

Semiconductor to metal transition in bilayer phosphorene under normal compressive strain.

Phosphorene, a two-dimensional analog of black phosphorous, has been a subject of immense interest recently, due to its high carrier mobilities and a tunable bandgap. So far, tunability has been predicted to be obtained with very high compressive/tensile in-plane strains, and vertical electric field, which are difficult to achieve experimentally. Here, we show using density functional theory based calculations the possibility of tuning electronic properties by applying normal compressive strain in bilayer phosphorene. A complete and fully reversible semiconductor to metal transition has been observed at [Formula: see text] strain, which can be easily realized experimentally. Furthermore, a direct to indirect bandgap transition has also been observed at [Formula: see text] strain, which is a signature of unique band-gap modulation pattern in this material. The absence of negative frequencies in phonon spectra as a function of strain demonstrates the structural integrity of the sheets at relatively higher strain range. The carrier mobilities and effective masses also do not change significantly as a function of strain, keeping the transport properties nearly unchanged. This inherent ease of tunability of electronic properties without affecting the excellent transport properties of phosphorene sheets is expected to pave way for further fundamental research leading to phosphorene-based multi-physics devices.

Ultra-sensitive pressure dependence of bandgap of rutile-GeO2 revealed by many body perturbation theory.

The reported values of bandgap of rutile GeO2 calculated by the standard density functional theory within local-density approximation (LDA)/generalized gradient approximation (GGA) show a wide variation (∼2 eV), whose origin remains unresolved. Here, we investigate the reasons for this variation by studying the electronic structure of rutile-GeO2 using many-body perturbation theory within the GW framework. The bandgap as well as valence bandwidth at Γ-point of rutile phase shows a strong dependence on volume change, which is independent of bandgap underestimation problem of LDA/GGA. This strong dependence originates from a change in hybridization among O-p and Ge-(s and p) orbitals. Furthermore, the parabolic nature of first conduction band along X-Γ-M direction changes towards a linear dispersion with volume expansion.

Infrared Signatures for Phase Identification in Hafnium Oxide Thin Films.

Phase identification in HfO2-based thin films is a prerequisite to understanding the mechanisms stabilizing the ferroelectric phase in these materials, which hold great promise in next-generation nonvolatile memory and computing technology. While grazing-incidence X-ray diffraction is commonly employed for this purpose, it has difficulty unambiguously differentiating between the ferroelectric phase and other metastable phases that may exist due to similarities in the d-spacings, their low intensities, and the overlapping of reflections. Infrared signatures provide an alternative route. However, their use in phase identification remains limited because phase control has overwhelmingly been accomplished via substituents, thereby convoluting infrared signatures between the substituents and the phase changes that they induce. Herein, we report the infrared optical responses of three undoped hafnium oxide films where annealing conditions have been used to create films consisting primarily of the ferroelectric polar orthorhombic Pca21, antipolar orthorhombic Pbca, and monoclinic P21/c phases, as was confirmed via transmission electron microscopy (TEM), UV-visible optical properties, and electrical property measurements. Vibrational signatures acquired from synchrotron nano-Fourier transform infrared spectroscopy (nano-FTIR) are shown to be capable of differentiating between the phases in a nondestructive, rapid, and nanoscale manner. The utility of nano-FTIR is illustrated for a film exhibiting an antiferroelectric polarization response. In this sample, it is proven that this behavior results from the Pbca phase rather than the often-cited tetragonal phase. By demonstrating that IR spectroscopy can unambiguously distinguish phases in this material, this work establishes a tool needed to isolate the factors dictating the ferroelectric phase stability in HfO2-based materials.

A Multilevel Analytical Theory for Prediction of Ferroelectric Perovskite Oxide Properties from Composition.

Prediction of properties from composition is a fundamental goal of materials science that is particularly relevant for ferroelectric perovskite oxide solid solutions where compositional variation is a primary tool for material design. Design of ferroelectric oxide solid solutions has been guided by heuristics and first-principles and Landau-Ginzburg-Devonshire theoretical methods that become increasingly difficult to apply in ternary, quaternary, and quintary solid solutions. To address this problem, a multilevel model is developed for the prediction of the ferroelectric-to-paraelectric transition temperature (Tc ), coercive field (Ec ), and polarization (P) of PbTiO3 -derived ferroelectric solid solutions from composition. The characteristics of the materials at different length scales, starting at the level of the electronic structure and chemical bonding of the constituent ions and ending at the level of collective behavior, are analytically related by using ferroelectric domain walls and cationic off-center displacements as the key links between the different levels of the model. The obtained composition-structure-property relationships provide a unified quantitatively predictive theory for understanding PbTiO3 -derived solid solutions. Such a multilevel analytical modeling approach is likely to be generally applicable to different classes of ferroelectric perovskite oxides and to other functional properties, and to materials and properties beyond the field of ferroelectrics.

A Predictive Theory for Domain Walls in Oxide Ferroelectrics Based on Interatomic Interactions and its Implications for Collective Material Properties.

Domain walls separating regions of ferroelectric material with polarization oriented in different directions are crucial for applications of ferroelectrics. Rational design of ferroelectric materials requires the development of a theory describing how compositional and environmental changes affect domain walls. To model domain wall systems, a discrete microscopic Landau-Ginzburg-Devonshire (dmLGD) approach with A- and B-site cation displacements serving as order parameters is developed. Application of dmLGD to the classic BaTiO3 , KNbO3, and PbTiO3 ferroelectrics shows that A-B cation repulsion is the key interaction that couples the polarization in neighboring unit cells of the material. dmLGD decomposition of the total energy of the system into the contributions of the individual cations and their interactions enables the prediction of different properties for a wide range of ferroelectric perovskites based on the results obtained for BaTiO3 , KNbO3, and PbTiO3 only. It is found that the information necessary to estimate the structure and energy of domain-wall "defects" can be extracted from single-domain 5-atom first-principles calculations, and that "defect-like" domain walls offer a simple model system that sheds light on the relative stabilities of the ferroelectric, antiferroelectric, and paraelectric bulk phases. The dmLGD approach provides a general theoretical framework for understanding and designing ferroelectric perovskite oxides.

Sustainable existence of solid mercury (Hg) nanoparticles at room temperature and their applications.

Although liquid mercury (Hg) has been known since antiquity, the formation of stable solid nano forms of Hg at room temperature has not been reported so far. Here, for the first time, we report a simple sonochemical route to obtain solid mercury nanoparticles, stabilized by reduced graphene oxide at ambient conditions. The as-formed solid Hg nanoparticles were found to exhibit remarkable rhombohedral morphology and crystallinity at room temperature. Extensive characterization using various physicochemical techniques revealed the unique properties of the solid nanoparticles of Hg compared to its bulk liquid metal phase. Furthermore, the solid nature of the Hg nanoparticles was studied electrochemically, revealing distinctive properties. We believe that solid Hg nanoparticles have the potential for important applications in the fields of electroanalytical chemistry and electrocatalysis.

First-Principles Investigation of Black Phosphorus Synthesis.

Black phosphorus (BP) is a layered semiconductor with outstanding properties, making it a promising candidate for optoelectronic and other applications. BP synthesis is an intriguing task largely due to the insufficient understanding of the synthesis mechanism. In this work, we use density functional theory calculations to examine BP and its precursor red phosphorus as they are formed from P4 building blocks. Our results suggest that, without external effects such as pressure or addition of a catalyst, the precursor is energetically favored in the initial steps of the synthesis, even though BP is the more stable allotrope. The higher energy of BP is dictated by its 2D geometry that gives rise to the higher number of high-energy strained bonds at the edge compared to the 1D geometry of red phosphorus. The elucidated BP formation pathway provides a natural explanation for the effectiveness of the recently discovered Sn/I catalyst used in BP synthesis.

Atomically thin gallium layers from solid-melt exfoliation.

Among the large number of promising two-dimensional (2D) atomic layer crystals, true metallic layers are rare. Using combined theoretical and experimental approaches, we report on the stability and successful exfoliation of atomically thin "gallenene" sheets on a silicon substrate, which has two distinct atomic arrangements along crystallographic twin directions of the parent α-gallium. With a weak interface between solid and molten phases of gallium, a solid-melt interface exfoliation technique is developed to extract these layers. Phonon dispersion calculations show that gallenene can be stabilized with bulk gallium lattice parameters. The electronic band structure of gallenene shows a combination of partially filled Dirac cone and the nonlinear dispersive band near the Fermi level, suggesting that gallenene should behave as a metallic layer. Furthermore, it is observed that the strong interaction of gallenene with other 2D semiconductors induces semiconducting to metallic phase transitions in the latter, paving the way for using gallenene as promising metallic contacts in 2D devices.

Metal Immiscibility Route to Synthesis of Ultrathin Carbides, Borides, and Nitrides.

Ultrathin ceramic coatings are of high interest as protective coatings from aviation to biomedical applications. Here, a generic approach of making scalable ultrathin transition metal-carbide/boride/nitride using immiscibility of two metals is demonstrated. Ultrathin tantalum carbide, nitride, and boride are grown using chemical vapor deposition by heating a tantalum-copper bilayer with corresponding precursor (C2 H2 , B powder, and NH3 ). The ultrathin crystals are found on the copper surface (opposite of the metal-metal junction). A detailed microscopy analysis followed by density functional theory based calculation demonstrates the migration mechanism, where Ta atoms prefer to stay in clusters in the Cu matrix. These ultrathin materials have good interface attachment with Cu, improving the scratch resistance and oxidation resistance of Cu. This metal-metal immiscibility system can be extended to other metals to synthesize metal carbide, boride, and nitride coatings.

Fluorinated h-BN as a magnetic semiconductor.

We report the fluorination of electrically insulating hexagonal boron nitride (h-BN) and the subsequent modification of its electronic band structure to a wide bandgap semiconductor via introduction of defect levels. The electrophilic nature of fluorine causes changes in the charge distribution around neighboring nitrogen atoms in h-BN, leading to room temperature weak ferromagnetism. The observations are further supported by theoretical calculations considering various possible configurations of fluorinated h-BN structure and their energy states. This unconventional magnetic semiconductor material could spur studies of stable two-dimensional magnetic semiconductors. Although the high thermal and chemical stability of h-BN have found a variety of uses, this chemical functionalization approach expands its functionality to electronic and magnetic devices.