Exploring diterpene metabolism in non-model species: transcriptome-enabled discovery and functional characterization of labda-7,13E-dienyl diphosphate synthase from Grindelia robusta.

Grindelia robusta or gumweed, is a medicinal herb of the sunflower family that forms a diverse suite of diterpenoid natural products. Its major constituents, grindelic acid and related grindelane diterpenoids accumulate in a resinous exudate covering the plants' surfaces, most prominently the unopened composite flower. Recent studies demonstrated potential pharmaceutical applications for grindelic acid and its synthetic derivatives. Mining of the previously published transcriptome of G. robusta flower tissue identified two additional diterpene synthases (diTPSs). We report the in vitro and in vivo functional characterization of an ent-kaurene synthase of general metabolism (GrTPS4) and a class II diTPS (GrTPS2) of specialized metabolism that converts geranylgeranyl diphosphate (GGPP) into labda-7,13E-dienyl diphosphate as verified by nuclear magnetic resonance (NMR) analysis. Tissue-specific transcript abundance of GrTPS2 in leaves and flowers accompanied by the presence of an endocyclic 7,13 double bond in labda-7,13E-dienyl diphosphate suggest that GrTPS2 catalyzes the first committed reaction in the biosynthesis of grindelic acid and related grindelane metabolites. With the formation of labda-7,13E-dienyl diphosphate, GrTPS2 adds an additional function to the portfolio of monofunctional class II diTPSs, which catalytically most closely resembles the bifunctional labda-7,13E-dien-15-ol synthase of the lycopod Selaginella moellendorffii. Together with a recently identified functional diTPS pair of G. robusta producing manoyl oxide, GrTPS2 lays the biosynthetic foundation of the diverse array of labdane-related diterpenoids in the genus Grindelia. Knowledge of these natural diterpenoid metabolic pathways paves the way for developing biotechnology approaches toward producing grindelic acid and related bioproducts.

Characterization of Solid Dispersion of Itraconazole Prepared by Solubilization in Concentrated Aqueous Solutions of Weak Organic Acids and Drying.

PURPOSE: The purpose of this study was to develop an amorphous solid dispersion (SD) of an extremely water-insoluble and very weakly basic drug, itraconazole (ITZ), by interaction with weak organic acids and then drying that would enhance dissolution rate of drug and physical stability of formulation. METHODS: Aqueous solubility of ITZ in concentrated solutions of weak organic acids, such as glutaric, tartaric, malic and citric acid, was determined. Solutions with high drug solubility were dried using vacuum oven and the resulting SDs having 2 to 20% drug load were characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD) and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. The dissolution of SDs was initially studied in 250 mL of 0.1 N HCl (pH 1.1), and any undissolved solids were collected and analyzed by PXRD. The pH of the dissolution medium was then changed from 1.1 to 5.5, particle size of precipitates were measured, and drug concentrations in solution were determined by filtration through membrane filters of varying pore sizes. RESULTS: The aqueous solubility of ITZ was greatly enhanced in presence of weak acids. While the solubility of ITZ in water was ~4 ng/ mL, it increased to 25-40 mg per g of solution at 25°C and 200 mg per g of solution at 65°C at a high acid concentration leading to extremely high solubilization. PXRD of SDs indicated that ITZ was present in the amorphous form, wherein the acid formed a partially crystalline matrix. ATR-FTIR results showed possible weak interactions, such as hydrogen bonding, between drug and acid but there was no salt formation. SDs formed highly supersaturated solutions at pH 1.1 and had superior dissolution rate as compared to amorphous drug and physical mixtures of drug and acids. Following the change in pH from 1.1 to 5.5, ITZ precipitated as mostly nanoparticles, providing high surface area for relatively rapid redissolution. CONCLUSIONS: A method of highly solubilizing an extremely water-insoluble drug, ITZ, in aqueous media and converting it into an amorphous form in a physically stable SD was successfully investigated. The dissolution rate and the extent of supersaturation of the drug in dissolution media improved greatly, and any precipitate formed at high pH had very small particle size.

Gene discovery of modular diterpene metabolism in nonmodel systems.

Plants produce over 10,000 different diterpenes of specialized (secondary) metabolism, and fewer diterpenes of general (primary) metabolism. Specialized diterpenes may have functions in ecological interactions of plants with other organisms and also benefit humanity as pharmaceuticals, fragrances, resins, and other industrial bioproducts. Examples of high-value diterpenes are taxol and forskolin pharmaceuticals or ambroxide fragrances. Yields and purity of diterpenes obtained from natural sources or by chemical synthesis are often insufficient for large-volume or high-end applications. Improvement of agricultural or biotechnological diterpene production requires knowledge of biosynthetic genes and enzymes. However, specialized diterpene pathways are extremely diverse across the plant kingdom, and most specialized diterpenes are taxonomically restricted to a few plant species, genera, or families. Consequently, there is no single reference system to guide gene discovery and rapid annotation of specialized diterpene pathways. Functional diversification of genes and plasticity of enzyme functions of these pathways further complicate correct annotation. To address this challenge, we used a set of 10 different plant species to develop a general strategy for diterpene gene discovery in nonmodel systems. The approach combines metabolite-guided transcriptome resources, custom diterpene synthase (diTPS) and cytochrome P450 reference gene databases, phylogenies, and, as shown for select diTPSs, single and coupled enzyme assays using microbial and plant expression systems. In the 10 species, we identified 46 new diTPS candidates and over 400 putatively terpenoid-related P450s in a resource of nearly 1 million predicted transcripts of diterpene-accumulating tissues. Phylogenetic patterns of lineage-specific blooms of genes guided functional characterization.

Acquired hypocalciuric hypercalcemia in a patient with CKD.

We present a case of an 82-year-old woman with elevated parathyroid hormone (PTH) levels, hypocalciuria, hypercalcemia, and stage 3 chronic kidney disease. Hypocalciuria initially was attributed to chronic kidney disease, and hypercalcemia was attributed to primary hyperparathyroidism. Subsequent laboratory studies showed autoantibodies in the patient's serum directed against the calcium-sensing receptor (CaSR). Functional testing in a CaSR-transfected human embryonic kidney-293 cell line showed that the patient's antibodies inhibited CaSR-mediated intracellular signaling that ordinarily would have been stimulated by extracellular calcium ions. Her serum calcium and PTH levels were normalized by treatment with the calcimimetic cinacalcet. We advise consideration of the presence of inhibitory autoantibodies directed at the CaSR in patients with hypercalcemic hyperparathyroidism and unexplained hypocalciuria or with confounding conditions affecting interpretation of urinary calcium measurement. A calcimimetic is an effective treatment for the hypercalcemia and elevated PTH levels in acquired hypocalciuric hypercalcemia caused by inhibitory anti-CaSR autoantibodies.

Supersolubilization and amorphization of a model basic drug, haloperidol, by interaction with weak acids.

PURPOSE: To present a novel approach of greatly enhancing aqueous solubility of a model weakly basic drug, haloperidol, by using weak acids that would not form salts with the drug and to attain physically stable form of amorphous drug by drying such aqueous solutions. METHOD: Aqueous solubility of haloperidol in presence of increasing concentrations of four different weak organic acids (malic, tartaric, citric, fumaric) were determined. Several concentrated aqueous solutions with differing drug-to-acid molar ratios were dried in vacuum oven, and dried materials were characterized by DSC, powder XRD, dissolution testing, and stability study. RESULT: Acids were selected such that they would not form salts with haloperidol. Haloperidol solubility increased greatly with increased concentrations of malic, tartaric and citric acids, reaching >300 mg/g of solution. In contrast to the haloperidol HCl aqueous solubility of 4 mg/g, this may be called supersolubilization. Fumaric acid did not cause such solubilization as it had low water solubility. Dried solids formed dispersions of amorphous haloperidol in acids that were either amorphous or partially crystalline. Amorphous haloperidol was physically stable and had better dissolution rate than HCl salt. CONCLUSION: A novel method of drug solubilization in aqueous media by acid-base interaction is presented. Physically stable amorphous systems of drugs may also be prepared by using this organic solvent-free approach.

Understanding and optimizing the dual excipient functionality of sodium lauryl sulfate in tablet formulation of poorly water soluble drug: wetting and lubrication.

PURPOSE: To evaluate and optimize sodium lauryl sulfate (SLS) and magnesium stearate (Mg.St) levels, with respect to dissolution and compaction, in a high dose, poorly soluble drug tablet formulation. METHODS: A model poorly soluble drug was formulated using high shear aqueous granulation. A D-optimal design was used to evaluate and model the effect of granulation conditions, size of milling screen, SLS and Mg.St levels on tablet compaction and ejection. The compaction profiles were generated using a Presster(©) compaction simulator. Dissolution of the kernels was performed using a USP dissolution apparatus II and intrinsic dissolution was determined using a stationary disk system. RESULTS: Unlike kernels dissolution which failed to discriminate between tablets prepared with various SLS contents, the intrinsic dissolution rate showed that a SLS level of 0.57% was sufficient to achieve the required release profile while having minimal effect on compaction. The formulation factors that affect tablet compaction and ejection were identified and satisfactorily modeled. The design space of best factor setting to achieve optimal compaction and ejection properties was successfully constructed by RSM analysis. CONCLUSIONS: A systematic study design helped identify the critical factors and provided means to optimize the functionality of key excipient to design robust drug product.

Rat prostaglandin EP3 receptor is highly promiscuous and is the sole prostanoid receptor family member that regulates INS-1 (832/3) cell glucose-stimulated insulin secretion.

Chronic elevations in fatty acid metabolites termed prostaglandins can be found in circulation and in pancreatic islets from mice or humans with diabetes and have been suggested as contributing to the ß-cell dysfunction of the disease. Two-series prostaglandins bind to a family of G-protein-coupled receptors, each with different biochemical and pharmacological properties. Prostaglandin E receptor (EP) subfamily agonists and antagonists have been shown to influence ß-cell insulin secretion, replication, and/or survival. Here, we define EP3 as the sole prostanoid receptor family member expressed in a rat ß-cell-derived line that regulates glucose-stimulated insulin secretion. Several other agonists classically understood as selective for other prostanoid receptor family members also reduce glucose-stimulated insulin secretion, but these effects are only observed at relatively high concentrations, and, using a well-characterized EP3-specific antagonist, are mediated solely by cross-reactivity with rat EP3. Our findings confirm the critical role of EP3 in regulating ß-cell function, but are also of general interest, as many agonists supposedly selective for other prostanoid receptor family members are also full and efficacious agonists of EP3. Therefore, care must be taken when interpreting experimental results from cells or cell lines that also express EP3.

Systemic Metabolic Alterations Correlate with Islet-Level Prostaglandin E2 Production and Signaling Mechanisms That Predict ß-Cell Dysfunction in a Mouse Model of Type 2 Diabetes.

The transition from ß-cell compensation to ß-cell failure is not well understood. Previous works by our group and others have demonstrated a role for Prostaglandin EP3 receptor (EP3), encoded by the Ptger3 gene, in the loss of functional ß-cell mass in Type 2 diabetes (T2D). The primary endogenous EP3 ligand is the arachidonic acid metabolite prostaglandin E2 (PGE2). Expression of the pancreatic islet EP3 and PGE2 synthetic enzymes and/or PGE2 excretion itself have all been shown to be upregulated in primary mouse and human islets isolated from animals or human organ donors with established T2D compared to nondiabetic controls. In this study, we took advantage of a rare and fleeting phenotype in which a subset of Black and Tan BRachyury (BTBR) mice homozygous for the Leptinob/ob mutation-a strong genetic model of T2D-were entirely protected from fasting hyperglycemia even with equal obesity and insulin resistance as their hyperglycemic littermates. Utilizing this model, we found numerous alterations in full-body metabolic parameters in T2D-protected mice (e.g., gut microbiome composition, circulating pancreatic and incretin hormones, and markers of systemic inflammation) that correlate with improvements in EP3-mediated ß-cell dysfunction.

Human Islet Expression Levels of Prostaglandin E2 Synthetic Enzymes, But Not Prostaglandin EP3 Receptor, Are Positively Correlated with Markers of ß-Cell Function and Mass in Nondiabetic Obesity.

Elevated islet production of prostaglandin E2 (PGE2), an arachidonic acid metabolite, and expression of prostaglandin E2 receptor subtype EP3 (EP3) are well-known contributors to the ß-cell dysfunction of type 2 diabetes (T2D). Yet, many of the same pathophysiological conditions exist in obesity, and little is known about how the PGE2 production and signaling pathway influences nondiabetic ß-cell function. In this work, plasma arachidonic acid and PGE2 metabolite levels were quantified in a cohort of nondiabetic and T2D human subjects to identify their relationship with glycemic control, obesity, and systemic inflammation. In order to link these findings to processes happening at the islet level, cadaveric human islets were subject to gene expression and functional assays. Interleukin-6 (IL-6) and cyclooxygenase-2 (COX-2) mRNA levels, but not those of EP3, positively correlated with donor body mass index (BMI). IL-6 expression also strongly correlated with the expression of COX-2 and other PGE2 synthetic pathway genes. Insulin secretion assays using an EP3-specific antagonist confirmed functionally relevant upregulation of PGE2 production. Yet, islets from obese donors were not dysfunctional, secreting just as much insulin in basal and stimulatory conditions as those from nonobese donors as a percent of content. Islet insulin content, on the other hand, was increased with both donor BMI and islet COX-2 expression, while EP3 expression was unaffected. We conclude that upregulated islet PGE2 production may be part of the ß-cell adaption response to obesity and insulin resistance that only becomes dysfunctional when both ligand and receptor are highly expressed in T2D.

Functional performance of silicified microcrystalline cellulose versus microcrystalline cellulose: a case study.

BACKGROUND: During the development of a tablet dosage form of an investigational compound, R411, several aspects were identified as critical quality attributes that required optimization. The use of nonsolvent processing prevented the moisture-induced physical changes in the drug product but presented manufacturing challenges related to sticking during compression and slowdown in dissolution after storage at stress conditions. AIM: The aim of this study was to evaluate silicified microcrystalline cellulose (SMCC), microcrystalline cellulose (MCC), and physical mixture of MCC-colloidal silicon dioxide (MCC/CSD at 98:2 ratio) as extragranular compression aids to address the processing and dissolution stability issues of this formulation. METHODS: The compactibility and stickiness upon compression over extended period of time as well as the dissolution of R411 formulations incorporating the aforementioned compression aids were investigated. In addition, the water sorption/desorption properties of these compression aids were determined. RESULTS: All formulations showed comparable compactibility irrespective of the compression aid used. Nevertheless, MCC alone or in a physical mixture with CSD showed sticking of the lower punches, whereas SMCC resulted in clean punch surface during extended compression runs. Furthermore, the three compression aids were compared for their effect on dissolution stability after storage at stress conditions. The formulations containing SMCC provided superior dissolution stability over the other compression aids evaluated in the study. CONCLUSIONS: Novel functionalities of SMCC are presented in terms of sticking prevention while having the most beneficial effect on dissolution stability in R411 formulation.

Stabilization of low glass transition temperature indomethacin formulations: impact of polymer-type and its concentration.

The objectives of this study were to formulate and stabilize amorphous formulation of low T(g) drug (Indomethacin, INM) with selected polymers and compare these formulations based on solubility and dissolution rate studies. Eudragit EPO (EPO), Polyvinylpyrrolidone-vinyl acetate copolymer (PVP-VA), and Polyvinylpyrrolidone K30 (PVPK30) were selected as hydrophilic polymers. The melt extrudates were characterized using differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), intrinsic dissolution rate and solubility studies. The formation of single-phase amorphous form was confirmed by DSC and PXRD. The melt extrudates showed a higher intrinsic dissolution rate (IDR), and solubility compared to the pure drug. The amorphous drug in solid solutions with EPO, PVP-VA, and PVPK30 showed tendency to revert back to crystalline form. However, the rate of reversion was dependent on the nature and concentration of the polymer. The solid solution with high ratio of EPO provided superior stabilization of the amorphous INM from crystallization. The stability of the amorphous form of INM could not be related to the glass transition temperature of the formulation as the mechanism of stabilization with EPO appears to be molecular interaction rather than immobilization. The presence of specific molecular interactions between INM and EPO was also shown by the antiplasticization effect.

Improving the dissolution rate of poorly water soluble drug by solid dispersion and solid solution: pros and cons.

The solid dispersions with poloxamer 188 (P188) and solid solutions with polyvinylpyrrolidone K30 (PVPK30) were evaluated and compared in an effort to improve aqueous solubility and bioavailability of a model hydrophobic drug. All preparations were characterized by differential scanning calorimetry, powder X-ray diffraction, intrinsic dissolution rates, and contact angle measurements. Accelerated stability studies also were conducted to determine the effects of aging on the stability of various formulations. The selected solid dispersion and solid solution formulations were further evaluated in beagle dogs for in vivo testing. Solid dispersions were characterized to show that the drug retains its crystallinity and forms a two-phase system. Solid solutions were characterized to be an amorphous monophasic system with transition of crystalline drug to amorphous state. The evaluation of the intrinsic dissolution rates of various preparations indicated that the solid solutions have higher initial dissolution rates compared with solid dispersions. However, after storage at accelerated conditions, the dissolution rates of solid solutions were lower due to partial reversion to crystalline form. The drug in solid dispersion showed better bioavailability in comparison to solid solution. Therefore, considering physical stability and in vivo study results, the solid dispersion was the most suitable choice to improve dissolution rates and hence the bioavailability of the poorly water soluble drug.

Quantitative metabolome, proteome and transcriptome analysis of midgut and fat body tissues in the mountain pine beetle, Dendroctonus ponderosae Hopkins, and insights into pheromone biosynthesis.

Bark beetles (Coleoptera: Scolytinae) are pests of many forests around the world. The mountain pine beetle (MPB), Dendroctonus ponderosae Hopkins, is a significant pest of western North American pine forests. The MPB is able to overcome the defences of pine trees through pheromone-assisted aggregation that results in a mass attack of host trees. These pheromones, both male and female produced, are believed to be biosynthesized in the midgut and/or fat bodies of these insects. We used metabolite analysis, quantitative proteomics (iTRAQ) and transcriptomics (RNA-seq) to identify proteins and transcripts differentially expressed between sexes and between tissues when treated with juvenile hormone III. Juvenile hormone III induced frontalin biosynthesis in males and trans-verbenol biosynthesis in females, as well as affected the expression of many proteins and transcripts in sex- and tissue-specific ways. Based on these analyses, we identified candidate genes involved in the biosynthesis of frontalin, exo-brevicomin, and trans-verbenol pheromones.

Characterization of physico-mechanical properties of indomethacin and polymers to assess their suitability for hot-melt extrusion processs as a means to manufacture solid dispersion/solution.

The objective of the study was to characterize the physical and viscoelastic properties of binary mixtures of drug and selected polymers to assess their suitability for use in the hot-melt extrusion (HME) process as a means to improve solubility by manufacturing either solid dispersion or solid solution. Indomethacin (INM) was selected as a model drug. Based on comparable solubility parameters, the selected polymers were Eudragit EPO (EPO), polyvinylpyrrolidone/vinyl acetate copolymer (PVP-VA), polyvinylpyrrolidone K30 (PVPK30), and poloxamer 188 (P188). The various drug and polymer systems were characterized for thermal and rheological properties as a function of drug concentration to provide an insight into miscibility and processibility of these systems. From the thermal analysis studies, a single T(g) was observed for the binary mixtures of INM/EPO, INM/PVP-VA, and INM/PVPK30, indicating miscibility of drug and polymer in the given ratios. In the case of mixtures of INM/P188, two melting endotherms were observed with decreasing drug melting point as a function of polymer concentration indicating partial miscibility of drug in polymer. As part of the rheological evaluation, zero rate viscosity (eta(o)) and activation energy (E(a)) was determined for the various systems using torque rheometer at varying shear rates and temperatures. The eta(o) for binary mixtures of drug and EPO, PVP-VA and PVPK30 were found to be significantly lower as compared to pure polymer, indicating disruption of the polymer structure due to miscibility of the drug. On the other hand, INM/P188 mixtures showed a higher eta(o) compared to pure polymer indicating partial miscibility of drug and polymer. With respect to E(a), the mixtures of INM/EPO showed an increase in E(a) with increasing drug concentration, suggesting antiplasticization effect of the drug. These findings corroborate the thermal analysis results showing increase T(g) for the various binary mixtures. The mixtures of INM/PVP-VA showed a decrease in the E(a) with the increasing drug concentration suggesting a plasticization effect of the drug. The understanding of thermal and rheological properties of the various drug/polymer mixtures help established the processing conditions for hotmelt extrusion (such as extrusion temperatures and motor load) as well as provided insight into the properties of the final extrudates. Using the actual hot-melt processing, a model was developed correlating the zero rate viscosity to the motor load determined by rheological evaluation.

Prevalence and clinical associations of calcium-sensing receptor and NALP5 autoantibodies in Finnish APECED patients.

CONTEXT: Previous studies have identified the calcium-sensing receptor (CaSR) and NALP5 as parathyroid autoantibody targets in patients with autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy (APECED). However, although NALP5 antibodies have been associated with the occurrence of hypoparathyroidism (HP) in APECED, it is unclear whether CaSR antibodies are a specific or sensitive marker for APECED-associated HP. OBJECTIVE: The objective of the study was to identify associations between the presence of CaSR and NALP5 antibodies and the disease manifestations and demographic characteristics of Finnish APECED patients. DESIGN, SUBJECTS, AND METHODS: This was a case-control study including 44 APECED patients and 38 age- and sex-matched healthy controls. Antibodies against the CaSR and NALP5 were detected using immunoprecipitation assays and radioligand binding assays, respectively. RESULTS: CaSR and NALP5 antibodies were detected in 16 of 44 (36%) and 13 of 44 (30%) patients, respectively. No statistically significant associations were found between the presence of CaSR or NALP5 antibodies and the disease manifestations of APECED including HP (P > .05). For the diagnosis of HP, CaSR and NALP5 antibodies had specificities of 83% and 50%, respectively, and sensitivities of 39% and 26%, respectively. A significant association between both a shorter APECED and HP duration (<10 y) and positivity for CaSR antibodies was noted (P = .019 and P = .0061, respectively). CONCLUSION: Neither CaSR nor NALP5 antibodies were found to be specific or sensitive markers for HP in APECED. Further investigations are required to determine the exact role of the autoimmune response against the CaSR and NALP5 in the pathogenesis of this autoimmune syndrome.

Low frequency of pendrin autoantibodies detected using a radioligand binding assay in patients with autoimmune thyroid disease.

CONTEXT: Pendrin is a transmembrane protein located at the apical end of the thyrocyte in which it mediates the efflux of iodide through the thyroid follicular cell. Recently pendrin was described as a significant antibody target in Japanese patients with Graves' disease (GD) or autoimmune hypothyroidism (AH) using an immunoblotting assay. However, a subsequent study failed to verify this in autoimmune thyroid disease (ATD) patients of Tunisian origin. OBJECTIVE: The aim of the current study was to evaluate a UK population of patients with ATD for the presence of pendrin autoantibodies using a novel radioligand binding assay (RBA). RESULTS: Sera from 71 GD and 66 AH patients and 28 healthy controls were evaluated for pendrin autoantibody reactivity in RBAs. The results indicated that 8.8% of patients with ATD (9.9% GD and 7.6% AH) were positive for pendrin autoantibodies. Overall, the frequency of pendrin autoantibodies did not differ significantly between the ATD patient cohorts and the healthy control group: P = .186 and P = .317 for GD and AH patients, respectively. CONCLUSION: Pendrin autoantibodies, detected using a novel RBA, are not widely prevalent in UK patients with ATD, nor do they differ in frequency between GD and AH. These autoantibodies are therefore unlikely to be a useful marker for disease diagnosis, although the role that pendrin may play as an autoantigen in the initiation or maintenance of thyroid autoimmunity remains to be established.

Interplay of formulation and process methodology on the extent of nifedipine molecular dispersion in polymers.

The aim of this study is to evaluate effects of formulation and process technology on drug molecular dispersibility in solid dispersions (SDs). Nifedipine solid dispersions with ethylcellulose (EC) and/or Eudragit RL (RL) prepared by co-precipitation, co-evaporation, and fusion methods were characterized with FTIR, DSC, and XRPD for the content of nifedipine as molecular dispersion, amorphous and/or crystalline suspensions. A method was developed based on regular solution and Flory-Huggins theories to calculate drug-polymer interaction parameter in solid dispersion systems. A synergic effect of RL and EC on nifedipine molecular dispersibility in solid dispersions was observed. Increasing RL/EC ratio resulted in a higher degree of drug-polymer interaction that thermodynamically favored molecular dispersion, which, however, was counteracted by a corresponding decrease in the matrix glass transition point that kinetically favored phase-separation. Process methodology was found to play an important role in the formation of amorphous SD. The ranking of technologies with respect to the extent of molecular dispersion from high to low is fusion>co-evaporation>co-precipitation, wherein the solidification rate of polymeric solution and non-solvent effects were linked to kinetic entrapment of drug molecules in polymeric networks. Since nifedipine molecular dispersibility in EC/RL polymer(s) is a result of interplay between thermodynamic and kinetic factors, nifedipine molecular dispersions prepared for this study are thermodynamically metastable systems. To explore those supersaturation systems for use in drug delivery of poorly water soluble drugs, it is critical to balance drug-polymer interactions and matrix glass transition point and to consider a process technology with a fast solidification rate during formulation and process development of amorphous SD.

Preclinical in vivo evaluation of efficacy, pharmacokinetics, and pharmacodynamics of a novel MEK1/2 kinase inhibitor RO5068760 in multiple tumor models.

Targeting the Ras/Raf/mitogen-activated protein kinase kinase (MEK)/extracellular signal-regulated kinase (ERK) pathway represents a promising anticancer strategy. Recently, we have reported a novel class of potent and selective non-ATP-competitive MEK1/2 inhibitors with a unique structure and mechanism of action. RO5068760 is a representative of this class showing significant efficacy in a broad spectrum of tumors with aberrant mitogen-activated protein kinase pathway activation. To understand the relationship between systemic exposures and target (MEK1/2) inhibition as well as tumor growth inhibition, the current study presents a detailed in vivo characterization of efficacy, pharmacokinetics, and pharmacodynamics of RO5068760 in multiple xenograft tumor models. For inhibition of MEK1/2 as measured by the phosphorylated ERK levels, the estimated EC(50)s in plasma were 1.36 micromol/L (880 ng/mL) and 3.35 micromol/L (2168 ng/mL) in LOX melanoma and HT-29 colorectal cancer models, respectively. A similar EC(50) (1.41 micromol/L or 915 ng/mL) was observed in monkey peripheral blood lymphocytes. To achieve tumor growth inhibition (>or=90%), an average plasma drug concentration of 0.65 or 5.23 micromol/L was required in B-RafV600E or K-Ras mutant tumor models, respectively, which were remarkably similar to the IC(90) values (0.64 or 4.1 micromol/L) determined in vitro for cellular growth inhibition. With equivalent in vivo systemic exposures, RO5068760 showed superior efficacy in tumors harboring B-RafV600E mutation. The plasma concentration time profiles indicate that constant p-ERK suppression (>50%) may not be required for optimal efficacy, especially in highly responsive tumors. This study may facilitate future clinical trial design in using biochemical markers for early proof of mechanism and in selecting the right patients and optimal dose regimen.

Effect of formulation and processing variables on the granulation kinetics of hot melt granulation (HMG) process.

The objective of the study was to evaluate the effect of formulation factors, such as type of drug and particulate properties of a drug, and processing variables, i.e. jacket temperature, impeller speed, and scale, on granulation kinetics the of hot-melt granulation (HMG) process. Two model active pharmaceutical ingredients (API) Ro-A and indomethacin were selected for this evaluation using poloxamer 188 as a meltable binder. The effect of solid-state properties of API was investigated for Ro-A, whereas the binder properties were maintained constant. General factorial design was used to investigate the effect of independent process variables, impeller speed and jacket temperature using impeller motor power consumption as response variable. Consistent granulation could be developed for Ro-A by optimizing the binder level and impeller speed, however, the addition of third excipient was necessary for indomethacin. The granulation rate was related to the bulk density and the surface area of the drug. The jacket temperature affected overall granulation time but had no significant effect on the granulation kinetics, suggesting that faster heating rate is desirable for optimal productivity. A significant increase in the granulation rate was observed with increase in impeller speed. The effect of impeller speed was further confirmed at 5 L and 25 L scale. From the formulation prospective, the critical factors were the level of binder, inherent binding properties of the API, the solid-state properties of API and binder. From processing perspectives, the impeller speed had a significant effect on the granulation kinetics.