Comparison of measured and calculated dose rates for the Castor HAW 20/28 CG.

In January 2003 neutron and gamma dose rate measurements at a CASTOR HAW 20/28 CG were performed by the Bundesamt für Strahlenschutz at Gorleben. First, commercial dose rate measurement devices were used, then spectral measurements with a Bonner sphere system were made to verify the results. Axial and circumferential dose rate profiles were measured near the cask surface and spectral measurements were performed for some locations. A shielding analysis of the cask was performed with the MCNP Monte Carlo Code with ENDF/B-VI cross section libraries. The cask was modelled 'as built', i.e. with its real inventory, dimensions and material densities and with the same configuration and position as in the storage facility. The average C/E-ratios are 1.3 for neutron dose rates and 1.4 for gamma dose rates. Both the measured and calculated dose rates show the same qualitative trends in the axial and circumferential direction. The spectral measurements show a variation in the spectra across the cask surface. This correlates with the variation found in the C/E-ratios. At cask midheight good agreement between the Bonner sphere system and the commercial device (LB 6411) is found with a 7% lower derived H*(10) dose rate from the Bonner sphere system.

Stereoselectivity of Mucorales lipases toward triradylglycerols--a simple solution to a complex problem.

The lipases from Rhizopus and Rhizomucor are members of the family of Mucorales lipases. Although they display high sequence homology, their stereoselectivity toward triradylglycerols (sn-2 substituted triacylglycerols) varies. Four different triradylglycerols were investigated, which were classified into two groups: flexible substrates with rotatable O'-C1' ether or ester bonds adjacent to C2 of glycerol and rigid substrates with a rigid N'-C1' amide bond or a phenyl ring in sn-2. Although Rhizopus lipase shows opposite stereopreference for flexible and rigid substrates (hydrolysis in sn-1 and sn-3, respectively), Rhizomucor lipase hydrolyzes both groups of triradylglycerols preferably in sn-1. To explain these experimental observations, computer-aided molecular modeling was applied to study the molecular basis of stereoselectivity. A generalized model for both lipases of the Mucorales family highlights the residues mediating stereoselectivity: (1) L258, the C-terminal neighbor of the catalytic histidine, and (2) G266, which is located in a loop contacting the glycerol backbone of a bound substrate. Interactions with triradylglycerol substrates are dominated by van der Waals contacts. Stereoselectivity can be predicted by analyzing the value of a single substrate torsion angle that discriminates between sn-1 and sn-3 stereopreference for all substrates and lipases investigated here. This simple model can be easily applied in enzyme and substrate engineering to predict Mucorales lipase variants and synthetic substrates with desired stereoselectivity.

The His gap motif in microbial lipases: a determinant of stereoselectivity toward triacylglycerols and analogs.

Lipases preferably hydrolyze the sn-1 and sn-3 acyl chain of triacylglycerols and sn-2 substituted analogs. Molecular modeling studies of the stereopreference of microbial lipases from Rhizopus oryzae, Rhizomucor miehei, Candida rugosa, and lipase B from Candida antarctica toward the hydrolysis of triacylglycerols and analogs revealed that sterical interactions occurring between the sn-2 substituent and the His gap affect substrate geometry, which can be monitored by a single torsion angle. This torsion angle correlates to the experimentally determined stereopreference and is, therefore, suitable to predict stereopreference by molecular modeling. For a given microbial lipase, stereopreference can be estimated by measuring the distance between the side chains of the His gap residues: a narrow His gap cleft implies sn-3 stereopreference for all investigated substrates; a medium-sized His gap discriminates by flexibility of the substrates: flexible substrates are hydrolyzed in sn-1, while rigid substrates are hydrolyzed in sn-3. A wide open His gap implies sn-1 stereopreference for all substrates. This rule holds for all investigated microbial wild type lipases and mutants.

Rational design of Rhizopus oryzae lipase with modified stereoselectivity toward triradylglycerols.

The binding site of sn-1(3)-regioselective Rhizopus oryzae lipase (ROL) has been engineered to change the stereoselectivity of hydrolysis of triacylglycerol substrates and analogs. Two types of prochiral triradylglycerols were considered: 'flexible' substrates with ether, benzylether or ester groups, and 'rigid' substrates with amide or phenyl groups, respectively, in the sn-2 position. The molecular basis of sn-1(3) stereoselectivity of ROL was investigated by modeling the interactions between substrates and ROL, and the model was confirmed by experimental determination of the stereoselectivity of wild-type and mutated ROL. For the substrates, the following rules were derived: (i) stereopreference of ROL toward triradylglycerols depends on the substrate structure. Substrates with 'flexible' sn-2 substituents are preferably hydrolyzed at sn-1, 'rigid' substrates at sn-3. (ii) Stereopreference of ROL toward triradylglycerols can be predicted by analyzing the geometry of the substrate docked to ROL: if the torsion angle phiO3-C3 of glycerol is more than 150 degrees, the substrate will preferably be hydrolyzed in sn-1, otherwise in sn-3. For ROL, the following rules were derived: (i) residue 258 affects stereoselectivity by steric interactions with the sn-2 substituent rather than polar interactions. To a lower extent, stereoselectivity is influenced by mutations further apart (L254) from residue 258. (ii) With 'rigid' substrates, increasing the size of the binding site (mutations L258A and L258S) shifts stereoselectivity of hydrolysis toward sn-1, decreasing its size (L258F and L258F/L254F) toward sn-3.