Ten simple rules for supporting a temporary online pivot in higher education.

As continued COVID-19 disruption looks likely across the world, perhaps until 2021, contingency plans are evolving in case of further disruption in the 2020-2021 academic year. This includes delivering face-to-face programs fully online for at least part of the upcoming academic year for new and continuing cohorts. This temporary pivot will necessitate distance teaching and learning across almost every conceivable pedagogy, from fundamental degrees to professionally accredited ones. Each institution, program, and course will have its own myriad of individualized needs; however, there is a common question that unites us all: how do we provide teaching and assessment to students in a manner that is accessible, fair, equitable, and provides the best learning whilst acknowledging the temporary nature of the pivot? No "one size fits all" solution exists, and many of the choices that need to be made will be far from simple; however, this paper provides a starting point and basic principles to facilitate discussions taking place around the globe by balancing what we know from the pedagogy of online learning with the practicalities imposed by this crisis and any future crises.

Novel microwave assisted synthesis of ZnS nanomaterials.

A novel ambient pressure microwave assisted technique is developed in which silver and indium-modified ZnS is synthesized. The as-prepared ZnS is characterized by x-ray diffraction, UV-vis spectroscopy, x-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid-energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional chamber furnace, it is completely converted to ZnO at 600 °C. Both cubic blende and hexagonal ZnS show excellent photocatalytic activity under irradiation from a 60 W light bulb. These ZnS samples also show significantly higher photocatalytic activity than the commercially available TiO(2) (Evonik-Degussa P-25).

Nanostructured Ti(1-x)S(x)O(2-y)N(y) heterojunctions for efficient visible-light-induced photocatalysis.

Highly visible-light-active S,N-codoped anatase-rutile heterojunctions are reported for the first time. The formation of heterojunctions at a relatively low temperature and visible-light activity are achieved through thiourea modification of the peroxo-titania complex. FT-IR spectroscopic studies indicated the formation of a Ti(4+)-thiourea complex upon reaction between peroxo-titania complex and thiourea. Decomposition of the Ti(4+)-thiourea complex and formation of visible-light-active S,N-codoped TiO(2) heterojunctions are confirmed using X-ray diffraction, Raman spectroscopy, transmission electron microscopy, and UV/vis spectroscopic studies. Existence of sulfur as sulfate ions (S(6+)) and nitrogen as lattice (N-Ti-N) and interstitial (Ti-N-O) species in heterojunctions are identified using X-ray photoelectron spectroscopy (XPS) and FT-IR spectroscopic techniques. UV-vis and valence band XPS studies of these S,N-codoped heterojunctions proved the fact that the formation of isolated S 3p, N 2p, and Π* N-O states between the valence and conduction bands are responsible for the visible-light absorption. Titanium dioxide obtained from the peroxo-titania complex exists as pure anatase up to a calcination temperature as high as 900 °C. Whereas, thiourea-modified samples are converted to S,N-codoped anatase-rutile heterojunctions at a temperature as low as 500 °C. The most active S,N-codoped heterojunction 0.2 TU-TiO(2) calcined at 600 °C exhibits a 2-fold and 8-fold increase in visible-light photocatalytic activities in contrast to the control sample and the commercial photocatalyst Degussa P-25, respectively. It is proposed that the efficient electron-hole separation due to anatase to rutile electron transfer is responsible for the superior visible-light-induced photocatalytic activities of S,N-codoped heterojunctions.

A highly efficient TiO(2-x)C(x) nano-heterojunction photocatalyst for visible light induced antibacterial applications.

Visible-light-induced antibacterial activity of carbon-doped anatase-brookite titania nano-heterojunction photocatalysts are reported for the first time. These heterostructures were prepared using a novel low temperature (100 °C) nonhydrothermal low power microwave (300 W) assisted method. Formation of interband C 2p states was found to be responsible for the band gap narrowing of the carbon doped heterojunctions. The most active photocatalyst obtained after 60 min of microwave irradiation exhibits a 2-fold higher visible-light induced photocatalytic activity in contrast to the standard commercial photocatalyst Evonik-Degussa P-25. Staphylococcus aureus inactivation rate constant for carbon-doped nano-heterojunctions and the standard photocatalyst was 0.0023 and -0.0081 min(-1), respectively. It is proposed that the photoexcited electrons (from the C 2p level) are effectively transferred from the conduction band of brookite to that of anatase causing efficient electron-hole separation, which is found to be responsible for the superior visible-light induced photocatalytic and antibacterial activities of carbon-doped anatase-brookite nano-heterojunctions.

Effect of N-doping on the photocatalytic activity of sol-gel TiO2.

In order to study the visible light photocatalytic activity of nitrogen doped titanium dioxide, the interaction between nitrogen dopant sources and titania precursors during sol-gel synthesis is investigated. N-TiO(2) was synthesised using the sol-gel method using 1,3-diaminopropane as a nitrogen source. Samples were annealed several temperatures and the percentage of rutile present determined by X-ray diffraction to be 0% (500°C), 46% (600°C), and 94% (700°C). The reducing amounts of anatase at higher temperatures are studied using FTIR, which suggests the absence of any polymeric chains formed by the chelating agents, which would normally extend anatase-to-rutile transformation temperatures. Differential scanning calorimetry shows that crystalliation occurs before 500°C, providing the crystalline form determined by XRD at 500°C. Increased temperature also resulted in diminished visible light absorption capability, with only the 500°C sample showing significant absorption in the visible region. XPS studies revealed that nitrogen remained within the TiO(2) lattice at higher temperatures. Consequent with the reduced visible light absorption capacity, photocatalytic activity also reduced with increased annealing temperature. Degradation kinetics of methylene blue, irradiated with a 60 W house-bulb, resulted in first order degradation rates constants of 0.40 × 10(-2), 0.19 × 10(-2), and 0.22 × 10(-2)min(-1) for 500, 600, and 700°C respectively. Degradation of Degussa P25 was minimal under the same conditions, and that of undoped TiO(2) was 0.02 × 10(-2)min(-1). Similarly, using 4-chlorophenol under solar irradiation conditions, the N-doped sample at 500°C substantially out-performed the undoped sample. These results are discussed in the context of the effect of increasing temperature on the nature of the band gap.

Photophysics of ruthenium polypyridyl complexes formed with lacunary polyoxotungstates with iron addenda.

The interactions between luminophore [Ru(bpy)3]2+, and the lacunary Dawson heteropolyanions, [P2W17O61(FeOH2)]7-, [P2W17O61(FeBr)]6- and [P2W17O61]10- were investigated using a combination of photophysics, optical and Raman spectroscopy. Extensive quenching of the excited state of [Ru(bpy)3]2+ was observed in each case. Quenching is attributed to the formation of association complexes between [Ru(bpy)(3)]2+ and the heteropolyanions in which the charge on the heteropolyanions is fully compensated for by the ruthenium polypyridyl species. The interaction appears to be principally electrostatic in nature producing [Ru(bpy)3]3.5[P2W17O61(FeOH2)], [Ru(bpy)3]3[P2W17O61(FeBr)] and [Ru(bpy)3]5[P2W17O61]10-. The association constants for formation of the clusters were obtained from photophysical studies and surprisingly, despite the electrostatic nature of the interaction, there was no correlation between the charge on the polyoxometallate and the association constant. In particular, the unsubstituted lacunary, [P2W17O61]10-, showed considerably weaker association compared to the transition metal substituted lacunaries, in spite of its 10- charge. Difference absorption spectroscopy revealed a new transition at ca. 480 nm for each of the cluster complexes. From resonance Raman spectroscopy the origin of this transition was found to involve the polyoxometallate. Unlike previously reported adducts, the cluster complexes formed were not luminescent. In all cases the cluster complexes exhibit remarkable photostability, with no photodecomposition or photo-induced ligand exchange reactions evident in acetonitrile, under conditions where [Ru(bpy)3]2+ alone exhibits considerable photolability.