Warm-season annual forages in forage-finishing beef systems: II. Animal performance and carcass characteristics.

More information on expected animal performance and carcass traits of forage-finished steers grazing warm-season annual forages is needed. To achieve this objective, a grazing trial was conducted in 2014, 2015, and 2016 (70, 63, and 56 d, respectively), with variation in length of grazing based on forage availability. Sixteen pastures (0.81 ha) were assigned to 1 of 4 forage treatments in a randomized complete block design. Forage treatments were brown midrib sorghum × sudangrass (BMR; Sorghum bicolor var. bicolor*bicolor var. sudanense), sorghum × sudangrass (SS), pearl millet [PM; Pennisetum glaucum (L.)R.Br.], or pearl millet planted with crabgrass [PMCG; Digitaria sanguinalis (L.) Scop.]. Each year, British-cross beef steers (n = 32; 3 y average: 429 ± 22 kg) were stratified by weight and randomly assigned to 1 of the 16 pastures for forage finishing. Each pasture was subdivided into two 0.405-ha paddocks for rotational stocking and a put-and-take stocking method was used to maintain a forage allowance of 116 kg forage dry matter/100 kg body weight (BW). Shrunk body weight and ultrasonically measured carcass composition were recorded at the initiation, middle, and end of each grazing season. Steers were harvested once forage availability became limited and chilled carcasses (24 h) were evaluated for yield grade and quality grade attributes. Statistical analysis was conducted using the GLIMMIX procedure in SAS 9.4 (Cary, NC) with main effects of treatment, year, and the interaction. Pasture and block were considered random effects while date was assessed as a main effect when applicable. Daily stocking densities were greater (P < 0.04) for SS than PMCG in the first 20 d of 2014 and 2015. Forage treatment did not affect (P > 0.17) total gain, total average daily gain, or body weight at any time point. Ultrasound composition traits of loin muscle area, 12th rib fat thickness, intramuscular fat, and rump fat were impacted (P < 0.01) by scanning date. No differences (P > 0.08) in forage treatments were observed for carcass characteristics associated with yield grade or quality grade. The findings suggest that forage-finished cattle during the summer months on BMR, SS, PM, and PMCG perform similarly, giving producers the option to use the most economical or practical forage type for their production system.

The impact of selection using residual average daily gain and marbling EPDs on growth, performance, and carcass traits in Angus steers1.

One hundred ninety-one Angus steers (age = 546 d ± 33.5; BW = 36.4 kg ± 4.2), sired by bulls divergently selected for feed efficiency over a 3-yr period, were used to compare growth, efficiency, body composition, and carcass characteristics. Selected Angus sires were either high (Hi) or low (Lo) for residual average daily gain (RADG) expected progeny differences (EPDs) and either high (Hi) or low (AVG; breed average) for marbling (MARB) EPDs. Steer weight and body composition, via ultrasound, were measured at weaning (205 d) and at 1 yr (365 d) of age. Steers entered the feedlot at 454 d of age and completed a 70-d GROWSAFE BEEF System evaluation to determine DMI, ADG, and residual feed intake (RFI). Steers were then slaughtered as they reached a backfat thickness of 1.3 cm. Carcasses were chilled for 48 h at 2 °C, ribbed, and USDA yield and quality grade data were collected. The right side of the carcass was fabricated and primal and subprimal weights were collected. A 2.5-cm longissimus steak was removed, vacuum-packaged, aged for 14 d, and frozen for slice shear force determination. Additionally, a 1.3-cm longissimus steak was removed from year 3 steers for proximate analysis. The GLM procedure of SAS was used and the main effects of RADG and MARB and their interaction were tested by the error term, SIRE(RADG*MARB). Year was evaluated as a replicate. Weight, ultrasound backfat, and REA were increased (P ≤ 0.05) at weaning in the Hi compared with AVG MARB steers. Feed efficiency, measured by RFI, was improved (P = 0.05) in the Hi RADG steers compared with Lo RADG steers. Slaughter weight and HCW were heavier (P ≤ 0.03) in the Hi RADG steers compared with Lo RADG steers. An interaction (P = 0.05) between RADG and MARB selection was found for marbling score, steers selected for Lo RADG and Hi MARB had greater marbling scores than all other groups. Longissimus proximate composition from year 3 showed that lipid content was greater (P < 0.01) in the Hi MARB and Lo RADG groups compared with the AVG MARB and Hi RADG groups, respectively. These findings suggest that selection using RADG or MARB EPDs has minimal impact on carcass yield. However, positive selection pressure placed on these breeding values can potentially improve efficiency and carcass quality. Lastly, it appears that improvements in feed efficiency can be obtained without negatively affecting beef carcass merit, especially USDA quality grade.

Warm-season annual forages in forage-finishing beef systems: I. Forage yield and quality.

The demand for a year-round supply of fresh, locally grown, forage-finished beef products has created a need for forage-finishing strategies during the summer months in the southeast. A 3-yr study was conducted to evaluate four warm-season annual forages in a southeastern forage-finishing beef production system. Treatments were four forage species and included brown-midrib sorghum × sudangrass (Sorghum bicolor var. bicolor*bicolor var. sudanense; BMR), sorghum × sudangrass (SS), pearl millet [Pennisetum glaucum (L.) R. Br.; PM], or pearl millet planted with crabgrass [Digitaria sanguinalis (L.) Scop.; PMCG]. Treatments were distributed in a randomized complete block design with four replicates. Pastures (0.81 ha, experimental unit) were assigned to one of four forage treatments, subdivided, and rotationally stocked with a variable stocking density. British-cross beef steers (n = 32; 3-yr average: 429 ± 22 kg) grazed for 70, 63, and 56 d in 2014, 2015, and 2016, respectively. Put-and-take animals were used to maintain a forage allowance of 116 kg forage dry matter /100 kg body weight. Forage mass was measured by clipping a 4.3-m2 area in triplicate on d 0 and on 14-d intervals. Hand grab samples for forage nutritive value determination and quadrat clippings for species compositions were measured on d 0 and on 34-d intervals until termination of the trial. Forage mass was lowest (P < 0.01) for PMCG at the initiation of the grazing trial, whereas BMR was greater (P < 0.01) than SS at wk 6. Total digestible nutrients in 2014 were greater for SS compared to BMR and PM at the middle harvest (P < 0.01) and BMR, PM, and PMCG at the final harvest (P < 0.01). At the middle and final harvests in both 2015 and 2016, PM and PMCG contained greater (P < 0.01) concentrations of crude protein than SS. These results suggest that BMR, SS, PM, and PMCG may all be used in southeastern forage-finishing beef production systems, as long as the producer strategically accounts for the slight growth and nutritive value differences throughout the season.

Effect of sodium citrate plus sodium diacetate or buffered vinegar on quality attributes of enhanced beef top sirloins.

As new pathogen intervention products come to market, it is important to ensure that they maintain or improve meat quality. Shelf-life and palatability traits were measured for top sirloins enhanced to 110% with solutions containing 0.5% sodium chloride and 0.4% sodium tripolyphosphate (CNT); CNT with a 1% solution of 80% sodium citrate plus 20% sodium diacetate (SC+D); or CNT with 2% buffered vinegar (VIN) in the final product. Enhancement solution did not influence color over 7days of retail display, except VIN was subjectively more red than CNT and SC+D on d 7 and SC+D had less discoloration than CNT on d 7 (P<0.05). VIN was rated lower (P<0.05) than CNT for trained sensory tenderness and there was no difference in shear force between treatments. SC+D and VIN show promise for use in beef enhancement solutions, however, further sensory studies are warranted.

Effects of sodium citrate plus sodium diacetate and buffered vinegar on Escherichia coli O157:H7 and psychrotrophic bacteria in brine-injected beef.

The objective of this research was to examine the effects of sodium citrate plus sodium diacetate or buffered vinegar on Escherichia coli O157:H7 and psychrotrophic bacteria when incorporated in brine solutions for injected beef. Two experiments were conducted in which 30 top rounds and 30 top sirloins were injected (110%) to contain (i) 0.5% sodium chloride and 0.4% sodium tripolyphosphate as the control (CNT); (ii) CNT with a 1% solution of 80% sodium citrate plus 20% sodium diacetate (SC + D); or (iii) CNT with 2% buffered vinegar (VIN) in the final product. For the E. coli challenge, muscles were surface inoculated to target 6 log CFU/cm(2). After injection and 10 days of storage in a vacuum package (4°C), one half of each muscle was sampled raw and the other half was cooked to an internal temperature of 60°C with a 12-min hold. For raw samples, a significant reduction of 0.6 and 1.0 log CFU/g of E. coli O157:H7 was observed in both SC + D- and VIN-injected top rounds and sirloins, respectively. All cooked samples were E. coli O157:H7 negative. For psychrotrophic analysis, subprimals were injected and vacuum packaged for 10 days at 0 ± 1°C. After 10 days of storage, steaks were fabricated and placed in aerobic display (4 ± 1°C) for 1, 7, 14, and 21 days. Psychrotrophic organism growth was restricted in SC + D and VIN samples when compared with CNT on all days except day 1. Sodium citrate plus sodium diacetate or buffered vinegar may improve the safety and shelf life of multineedle brine-injected beef.