Analysis of munitions constituents in IMX formulations by HPLC and HPLC-MS.

The use of Insensitive Munitions eXplosives (IMX) is increasing as the Army seeks to replace certain conventional munitions constituents, such as 2,4,6-trinitrotolene (TNT), for improved safety. The IMX formulations are more stable and therefore less prone to accidental detonation while designed to match the performance of legacy materials. Two formulations, IMX 101 and 104 are being investigated as a replacement for TNT in artillery rounds and composition B Army mortars, respectively. The chemical formulations of IMX-101 and 104 are comprised of four constituents;2,4-dinitroanisole (DNAN), 3-nitro-1,2,4-triazol-5-one (NTO), 1-nitroguanidine (NQ), and Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) which are mixed in various ratios to achieve the desired performance. The current work details the analysis of the IMX constituents by single column HPLC-UV-ESI-MS. Detection limits determined are in agreement with similar HPLC analysis of compounds, ranging from 7 to 9µg/L. Gradient mobile phases are used to allow separation of the 4 target compounds in more complex mixture of other concomitant compounds. Mass spectra are used to confirm analyte identity with chromatographic retention time.

Characterization of metals released from coal fly ash during dredging at the Kingston ash recovery project.

A storage-pond dike failure occurred on December 22, 2008 at the Tennessee Valley Authority Kingston Fossil Plant resulting in the release of over 4million cubic meters (5million cubic yards) of fly ash. Approximately half of the released ash was deposited in the main channel of the Emory River, Tennessee, USA. Remediation efforts of the Emory River focused on hydraulic dredging, as well as mechanical excavation in targeted areas. However, agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could promote dissolution and desorption of metals from the solid fly ash material. Furthermore, aeration of the dredge slurry could alter the redox state of metals in the fly ash material and thereby change their sorption, mobility, and toxicity properties. The research presented here focuses on the concentrations and speciation of metals during the fly ash recovery from the Emory River. Our results indicate that arsenite [As(III)] released from the fly ash material during dredging was slowly oxidized to arsenate [As(V)] in the slurry recovery system with subsequent removal through precipitation or sorption reactions with suspended fly ash material. Concentrations of other dissolved metals, including iron and manganese, also generally decreased in the ash recovery system prior to water discharge back to the river.

Mechanical properties and structure of the biological multilayered material system, Atractosteus spatula scales.

During recent decades, research on biological systems such as abalone shell and fish armor has revealed that these biological systems employ carefully arranged hierarchical multilayered structures to achieve properties of high strength, high ductility and light weight. Knowledge of such structures may enable pathways to design bio-inspired materials for various applications. This study was conducted to investigate the spatial distribution of structure, chemical composition and mechanical properties in mineralized fish scales of the species Atractosteus spatula. Microindentation tests were conducted, and cracking patterns and damage sites in the scales were examined to investigate the underlying protective mechanisms of fish scales under impact and penetration loads. A difference in nanomechanical properties was observed, with a thinner, stiffer and harder outer layer (indentation modulus ∼69 GPa and hardness ∼3.3 GPa) on a more compliant and thicker inner layer (indentation modulus ∼14.3 GPa and hardness ∼0.5 GPa). High-resolution scanning electron microscopy imaging of a fracture surface revealed that the outer layer contained oriented nanorods embedded in a matrix, and that the nanostructure of the inner layer contained fiber-like structures organized in a complex layered pattern. Damage patterns formed during microindentation show complex deformation mechanisms. Images of cracks identify growth through the outer layer, then deflection along the interface before growing and arresting in the inner layer. High-magnification images of the crack tip in the inner layer show void-linking and fiber-bridging exhibiting inelastic behavior. The observed difference in mechanical properties and unique nanostructures of different layers may have contributed to the resistance of fish scales to failure by impact and penetration loading.

Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests.

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.