RESUMO
Partial cystectomy procedures for urinary bladder-related dysfunction involve long recovery periods, during which urodynamic studies (UDS) intermittently assess lower urinary tract function. However, UDS are not patient-friendly, they exhibit user-to-user variability, and they amount to snapshots in time, limiting the ability to collect continuous, longitudinal data. These procedures also pose the risk of catheter-associated urinary tract infections, which can progress to ascending pyelonephritis due to prolonged lower tract manipulation in high-risk patients. Here, we introduce a fully bladder-implantable platform that allows for continuous, real-time measurements of changes in mechanical strain associated with bladder filling and emptying via wireless telemetry, including a wireless bioresorbable strain gauge validated in a benchtop partial cystectomy model. We demonstrate that this system can reproducibly measure real-time changes in a rodent model up to 30 d postimplantation with minimal foreign body response. Studies in a nonhuman primate partial cystectomy model demonstrate concordance of pressure measurements up to 8 wk compared with traditional UDS. These results suggest that our system can be used as a suitable alternative to UDS for long-term postoperative bladder recovery monitoring.
Assuntos
Bexiga Urinária , Infecções Urinárias , Animais , Humanos , Bexiga Urinária/cirurgia , Urodinâmica/fisiologia , Próteses e Implantes , CistectomiaRESUMO
Soft microfluidic systems that capture, store, and perform biomarker analysis of microliter volumes of sweat, in situ, as it emerges from the surface of the skin, represent an emerging class of wearable technology with powerful capabilities that complement those of traditional biophysical sensing devices. Recent work establishes applications in the real-time characterization of sweat dynamics and sweat chemistry in the context of sports performance and healthcare diagnostics. This paper presents a collection of advances in biochemical sensors and microfluidic designs that support multimodal operation in the monitoring of physiological signatures directly correlated to physical and mental stresses. These wireless, battery-free, skin-interfaced devices combine lateral flow immunoassays for cortisol, fluorometric assays for glucose and ascorbic acid (vitamin C), and digital tracking of skin galvanic responses. Systematic benchtop evaluations and field studies on human subjects highlight the key features of this platform for the continuous, noninvasive monitoring of biochemical and biophysical correlates of the stress state.
Assuntos
Técnicas Biossensoriais/instrumentação , Microfluídica/métodos , Suor/química , Espectroscopia Dielétrica/instrumentação , Espectroscopia Dielétrica/métodos , Impedância Elétrica , Desenho de Equipamento/instrumentação , Desenho de Equipamento/métodos , Fluorometria , Humanos , Imunoensaio , Dispositivos Lab-On-A-Chip , Pele/química , Dispositivos Eletrônicos VestíveisRESUMO
Zinc metal anodes show great promise for cheap and safe energy storage devices. However, it remains challenging to regulate highly efficient Zn plating/stripping under a high depth of discharge (DOD). Guided by density functional theory calculation, we here synthesized an oxygen- and nitrogen-codoped carbon superstructure as an efficient host for high-DOD Zn metal anodes through rational monomer selection, polymer self-assembly, and structure-preserved carbonization. With microscale 3D hierarchical structures, microcrystalline graphitic layers, and zincophilic heteroatom dopants, a flower-shaped carbon (Cflower) host could guide Zn nucleation and growth in a heteroepitaxial mode, affording horizontal plating with a high Coulombic efficiency (CE) and long life. As a demonstration, the Cflower-hosted Zn anode was paired with both battery and supercapacitor cathodes and delivered large capacity/capacitance, fast rates, long life, and ca. 100% CE even under a high DOD, outclassing hostless Zn-based devices. As they possess cheap, scalable, and efficient features, Cflower hosts hold the potential for practical zinc-metal-based energy devices.
Assuntos
Carbono , Grafite , Fontes de Energia Elétrica , Eletrodos , ZincoRESUMO
Flexible electronic/optoelectronic systems that can intimately integrate onto the surfaces of vital organ systems have the potential to offer revolutionary diagnostic and therapeutic capabilities relevant to a wide spectrum of diseases and disorders. The critical interfaces between such technologies and living tissues must provide soft mechanical coupling and efficient optical/electrical/chemical exchange. Here, we introduce a functional adhesive bioelectronic-tissue interface material, in the forms of mechanically compliant, electrically conductive, and optically transparent encapsulating coatings, interfacial layers or supporting matrices. These materials strongly bond both to the surfaces of the devices and to those of different internal organs, with stable adhesion for several days to months, in chemistries that can be tailored to bioresorb at controlled rates. Experimental demonstrations in live animal models include device applications that range from battery-free optoelectronic systems for deep-brain optogenetics and subdermal phototherapy to wireless millimetre-scale pacemakers and flexible multielectrode epicardial arrays. These advances have immediate applicability across nearly all types of bioelectronic/optoelectronic system currently used in animal model studies, and they also have the potential for future treatment of life-threatening diseases and disorders in humans.
Assuntos
Implantes Absorvíveis , Adesivos , Animais , Condutividade Elétrica , EletrônicaRESUMO
To enhance energy efficiency and durability, a highly active and durable 3D ordered mesoporous cobalt oxide framework has been developed for rechargeable zinc-air batteries. The bifunctional air electrode consisting of 3DOM Co3 O4 having high active surface area and robust structure, results in superior charge and discharge battery voltages, and durable performance for electrically rechargeable zinc-air batteries.
RESUMO
This study aimed to investigate the biotransformation of soybean isoflavones to hydroxyisoflavones, and the primary and secondary metabolite change during Aspergillus oryzae KACC40247-mediated fermentation by gas chromatography-time of flight-mass spectrometry and LC-MS with multivariate analysis. The mass spectrometric analysis revealed that acetylglycosides and glycosides decreased during the first 12 h of fermentation, while the aglycones increased up to that time point. This was followed by a decrease in aglycone levels due to the formation of hydroxyisoflavones. The hydroxyflavones, 8-hydroxydaidzein, hydroxygenistein, and hydroxyglycitein, resulting from the biotransformation of the corresponding aglycones, increased up to 24 h, and then subsequently decreased. During fermentation, the levels of monosaccharides, aspartic acid, pyroglutamic acid, gamma-aminobutyric acid, and organic acids gradually decreased, whereas the levels of threonine, serine, and glycine increased. Hydroxyisoflavone was more strongly correlated with antioxidant activity than the other metabolites. Our results suggest that biotransformation has the potential to improve the nutritional properties of soy-based food.
Assuntos
Aspergillus oryzae/metabolismo , Glycine max/química , Isoflavonas/metabolismo , Metabolômica , Antioxidantes/metabolismo , Biotransformação , Fermentação , Extratos Vegetais/metabolismoRESUMO
Highly luminescent CdTe quantum dots (QDs) were synthesized through a co-precipitation route in aqueous salt solutions using different thiols as stabilizers. The synthetic procedure was simple, efficient, and stable. It could also allow controlling the emission wavelength by varying the experimental conditions such as reaction time and pH values. The strong luminescence of the QDs was observed under UV-excitation and emission colors could be adjusted. The interaction between CdTe QDs and triethylenetetramine dihydrochloride (TETA) which is a candidate treatment for diabetic cardiovascular complication was investigated by fluorescence spectroscopy. Based on the quenching effect on CdTe photoluminescence intensity by TETA, a simple assay system for analyzing the content of TETA in aqueous samples was developed. The linearity was maintained in the range of 0.2 µM to 1.2 µM (R2 = 0.994) with a limit of detection (LOD; S/N = 3) at 28 nM. The results showed that CdTe QDs capped with diverse thiols has a potential for the quantitative analysis of TETA in urine samples.
Assuntos
Compostos de Cádmio/química , Nanotecnologia/métodos , Fenômenos Ópticos , Pontos Quânticos/química , Compostos de Sulfidrila/química , Telúrio/química , Trientina/análise , Concentração de Íons de Hidrogênio , Cinética , Tensoativos/química , Tioglicolatos/químicaRESUMO
Despite the very high theoretical energy density, Li-S batteries still need to fundamentally overcome the sluggish redox kinetics of lithium polysulfides (LiPSs) and low sulfur utilization that limit the practical applications. Here, highly active and stable cathode, nitrogen-doped porous carbon nanotubes (NPCTs) decorated with NixCo1-xS2 nanocrystals are systematically synthesized as multi-functional electrocatalytic materials. The nitrogen-doped carbon matrix can contribute to the adsorption of LiPSs on heteroatom active sites with buffering space. Also, both experimental and computation-based theoretical analyses validate the electrocatalytic principles of co-operational facilitated redox reaction dominated by covalent-site-dependent mechanism; the favorable adsorption-interaction and electrocatalytic conversion of LiPSs take place subsequently by weakening sulfur-bond strength on the catalytic NiOh 2+-S-CoOh 2+ backbones via octahedral TM-S (TM = Ni, Co) covalency-relationship, demonstrating that fine tuning of CoOh 2+ sites by NiOh 2+ substitution effectively modulates the binding energies of LiPSs on the NixCo1-xS2@NPCTs surface. Noteworthy, the Ni0.261Co0.739S2@NPCTs catalyst shows great cyclic stability with a capacity of up to 511 mAh g-1 and only 0.055% decay per cycle at 5.0 C during 1000 cycles together with a high areal capacity of 2.20 mAh cm-2 under 4.61 mg cm-2 sulfur loading even after 200 cycles at 0.2 C. This strategy highlights a new perspective for achieving high-energy-density Li-S batteries.
RESUMO
To understand environmental effects affecting paralytic shellfish toxin production of Centrodinium punctatum, this study examined the growth responses, and toxin contents and profiles of a C. punctatum culture exposed to drastic changes of temperature (5-30 °C) and salinity (15-40). C. punctatum grew over a temperature range of 15-25 °C, with an optimum of 20 °C., and over a salinity range of 25-40, with optimum salinities of 30-35. This suggests that C. punctatum prefers relatively warm waters and an oceanic habitat for its growth and can adapt to significant changes of salinity levels. When C. punctatum was cultivated at different temperature and salinity levels, the PST profile included four major analogs (STX, neoSTX, GTX1 and GTX4, constituted >80 % of the profile), while low amounts of doSTX and traces of dc-STX and dc-GTX2 were also observed. Interestingly, though overall toxin contents did not change significantly with temperature, increases in the proportion of STX, and decreases in proportions in GTX1 and GTX4 were observed with higher temperatures. Salinity did not affect either toxin contents or profile from 25 to 35. However, the total toxin content dropped to approximately half at salinity 40, suggesting this salinity may induce metabolic changes in C. punctatum.
Assuntos
Dinoflagellida , Toxinas Biológicas , Temperatura , Salinidade , Oceanos e MaresRESUMO
This 20-year study (2001-2020) conducted in Jangmok Bay, Korea, assessed the intricate relationships between environmental factors and Noctiluca scintillans blooms. Granger causality tests and PCA analysis were used to assess the impact of sea surface temperature (SST), salinity, dissolved oxygen (DO) concentration, wind patterns, rainfall, and chlorophyll-a (Chl-a) concentration on bloom dynamics. The results revealed significant, albeit delayed, influences of these variables on bloom occurrence, with SST exhibiting a notable 2-month lag and salinity a 1-month lag in their impact. Additionally, the analysis highlighted the significant roles of phosphate, ammonium, and silicate, which influenced N. scintillans blooms with lags of 1 to 3 months. The PCA demonstrates how SST and wind speed during spring and summer, along with wind direction and salinity in winter, significantly impact N. scintillans blooms. We noted not only an increase in large-scale N. scintillans blooms but also a cyclical pattern of occurrence every 3 years. These findings underscore the synergistic effects of environmental factors, highlighting the complex interplay between SST, salinity, DO concentration, and weather conditions to influence bloom patterns. This research enhances our understanding of harmful algal blooms (HABs), emphasizing the importance of a comprehensive approach that considers multiple interconnected environmental variables for predicting and managing N. scintillans blooms.
Assuntos
Baías , Monitoramento Ambiental , Proliferação Nociva de Algas , República da Coreia , Salinidade , Dinoflagellida/crescimento & desenvolvimento , Estações do Ano , Clorofila A/análise , Água do Mar/química , Temperatura , VentoRESUMO
Developing commercially viable electrocatalyst lies at the research hotspot of rechargeable Zn-air batteries, but it is still challenging to meet the requirements of energy efficiency and durability in realistic applications. Strategic material design is critical to addressing its drawbacks in terms of sluggish kinetics of oxygen reactions and limited battery lifespan. Herein, a "raisin-bread" architecture is designed for a hybrid catalyst constituting cobalt nitride as the core nanoparticle with thin oxidized coverings, which is further deposited within porous carbon aerogel. Based on synchrotron-based characterizations, this hybrid provides oxygen vacancies and Co-Nx -C sites as the active sites, resulting from a strong coupling between CoOx Ny nanoparticles and 3D conductive carbon scaffolds. Compared to the oxide reference, it performs enhanced stability in harsh electrocatalytic environments, highlighting the benefits of the oxynitride. Furthermore, the 3D conductive scaffolds improve charge/mass transportation and boost durability of these active sites. Density functional theory calculations reveal that the introduced N species into hybrid can synergistically tune the d-band center of cobalt and improve its bifunctional activity. As a result, the obtained air cathode exhibits bifunctional overpotential of 0.65 V and a battery lifetime exceeding 1350 h, which sets a new record for rechargeable Zn-air battery reported so far.
RESUMO
A recombinant oleate hydratase from Lysinibacillus fusiformis converted ricinoleic acid to a product, whose chemical structure was identified as the novel compound 10,12-dihydroxystearic acid by gas chromatograph/mass spectrometry, Fourier transform infrared, and nuclear magnetic resonance analysis. The reaction conditions for the production of 10,12-dihydroxystearic acid were optimized as follows: pH 6.5, 30 °C, 15 g l(-1) ricinoleic acid, 9 mg ml(-1) of enzyme, and 4 % (v/v) methanol. Under the optimized conditions, the enzyme produced 13.5 g l(-1) 10,12-dihydroxystearic acid without detectable byproducts in 3 h, with a conversion of substrate to product of 90 % (w/w) and a productivity of 4.5 g l(-1) h(-1). The emulsifying activity of 10,12-dihydroxystearic acid was higher than that of oleic acid, ricinoleic acid, stearic acid, and 10-hydroxystearic acid, indicating that 10,12-dihydroxystearic acid can be used as a biosurfactant.
Assuntos
Bacillaceae/enzimologia , Proteínas de Bactérias/metabolismo , Ácido Oleico/metabolismo , Ácidos Ricinoleicos/metabolismo , Ácidos Esteáricos/química , Ácidos Esteáricos/metabolismo , Bacillaceae/química , Bacillaceae/genética , Proteínas de Bactérias/química , Proteínas de Bactérias/genética , Estabilidade Enzimática , Cromatografia Gasosa-Espectrometria de Massas , Cinética , Estrutura MolecularRESUMO
Aspergillus oryzae KACC 40247 was selected from among 60 fungal strains as an effective 7,8,4'-trihydroxyisoflavone (8-hydroxydaidzein)-producing fungus. The optimal culture conditions for production by this strain in a 7-L fermentor were found to be 30 °C, pH 6, and 300 rpm. Under these conditions, A. oryzae KACC 40247 produced 62 mg/L of 8-hydroxydaidzein from soybean extract in 30 h, with a productivity of 2.1 mg/L/h. These are the highest production and productivity for 8-hydroxydaidzein ever reported. To increase production, several concentrations of daidzin and of daidzein as precursor were added at several culture times. The optimal addition time and concentration for daidzin were 12 h and 1,248 mg/L, and those for daidzein were 12 h and 254 mg/L respectively. Maximum production and productivity for 8-hydroxydaidzein with the addition of daidzein were 95 mg/L and 3.2 mg/L/h respectively, and those with the addition of daidzin were 160 mg/L and 4.4 mg/L/h respectively.
Assuntos
Aspergillus oryzae/metabolismo , Fermentação , Isoflavonas/biossíntese , Aspergillus oryzae/genética , Meios de Cultura , Isoflavonas/química , Isoflavonas/genética , Isoflavonas/metabolismo , Glycine max/químicaRESUMO
The fabrication of microlens arrays (MLAs) using diffuser-assisted photolithography (DPL) has garnered substantial recent interest owing to the exceptional capabilities of DPL in adjusting the size and shape, achieving high fill factors, enhancing productivity, and ensuring excellent reproducibility. The inherent unpredictability of light interactions within the diffuser poses challenges in accurately forecasting the final shape and dimensions of microlenses in the DPL process. Herein, we introduce a comprehensive theoretical model to forecast microlens shapes in response to varying exposure doses within a DPL framework. We establish a robust MLA fabrication method aligned with conventional DPL techniques to enable precise shape modulation. By calibrating the exposure doses meticulously, we generate diverse MLA configurations, each with a distinct shape and size. Subsequently, by utilizing the experimentally acquired data encompassing parameters such as height, radius of curvature, and angles, we develop highly precise theoretical prediction models, achieving R-squared values exceeding 95%. The subsequent validation of our model encompasses the accurate prediction of microlens shapes under specific exposure doses. The verification results exhibit average error rates of approximately 2.328%, 7.45%, and 3.16% for the height, radius of curvature, and contact angle models, respectively, all of which were well below the 10% threshold.
RESUMO
Au and Pt are well-known catalysts for electrocatalytic oxidation of biomass-derived glycerol. Although some nonprecious-metal-based materials to replace the costly Au and Pt are used for this reaction, the fundamental question of how the nonprecious catalysts affect the reaction chemistry and mechanism compared to Au and Pt catalysts is still unanswered. In this work, both experimental and computational methods are used to understand how and why the reaction performance and chemistry for the electrocatalytic glycerol oxidation reaction (EGOR) change with electrochemically-synthesized CuCo-oxide, Cu-oxide, and Co-oxide catalysts compared to conventional Au and Pt catalysts. The Au and Pt catalysts generate major glyceric acid and glycolic acid products from the EGOR. Interestingly, the prepared Cu-based oxides produce glycolic acid and formic acid with high selectivity of about 90.0%. This different reaction chemistry is related to the enhanced ability of CC bond cleavage on the Cu-based oxide materials. The density functional theory calculations demonstrate that the formic acids are mainly formed on the Cu-based oxide surfaces rather than in the process of glycolic acid formation in the free energy diagram. This study provides critical scientific insights into developing future nonprecious-based materials for electrochemical biomass conversions.
RESUMO
To better understand the role of resting cysts in the outbreak of paralytic shellfish poisoning and bloom dynamics in Jinhae-Masan Bay, Korea, this study investigated the germination features of ellipsoidal Alexandrium cysts isolated from sediments collected in winter and summer under different combinations of temperature and salinity. Morphology and phylogeny of germling cells revealed that the ellipsoidal Alexandrium cysts belong to Alexandrium catenella (Group I). The cysts could germinate across a wide range of temperature (5-25 °C) with germination success within 5 days, indicating that continuous seeding for the maintenance of vegetative cells in the water column may occur through the year without an endogenous clock to regulate germination timing. In addition, the cyst germination of A. catenella (Group I) was not controlled by seasonal salinity changes. Based on the results, this study provides a schematic scenario of the bloom development of A. catenella (Group I) in Jinhae-Masan Bay, Korea.
Assuntos
Cistos , Dinoflagellida , Intoxicação por Frutos do Mar , Humanos , Dinoflagellida/fisiologia , Temperatura , Baías , Salinidade , República da CoreiaRESUMO
The high explosiveness of hydrogen gas in the air necessitates prompt detection in settings where hydrogen is used. For this reason, hydrogen sensors are required to offer rapid detection and possess superior sensing characteristics in terms of measurement range, linearity, selectivity, lifetime, and environment insensitivity according to the publicized protocol. However, previous approaches have only partially achieved the standardized requirements and have been limited in their capability to develop reliable materials for spatially accessible systems. Here, an electrical hydrogen sensor with an ultrafast response (â¼0.6 s) satisfying all demands for hydrogen detection is demonstrated. Tailoring structural engineering based on the reaction kinetics of hydrogen and palladium, an optimized heating architecture that thermally activates fully suspended palladium (Pd) nanowires at a uniform temperature is designed. The developed Pd nanostructure, at a designated temperature distribution, rapidly reacts with hydrogen, enabling a hysteresis-free response from 0.1% to 10% and durable characteristics in mechanical shock and repetitive operation (>10,000 cycles). Moreover, the device selectively detects hydrogen without performance degradation in humid or carbon-based interfering gas circumstances. Finally, to verify spatial accessibility, the wireless hydrogen detection system has been demonstrated, detecting and reporting hydrogen leakage in real-time within just 1 s.
RESUMO
The interest in biodegradable pressure sensors in the biomedical field is growing because of their temporary existence in wearable and implantable applications without any biocompatibility issues. In contrast to the limited sensing performance and biocompatibility of initially developed biodegradable pressure sensors, device performances and functionalities have drastically improved owing to the recent developments in micro-/nano-technologies including device structures and materials. Thus, there is greater possibility of their use in diagnosis and healthcare applications. This review article summarizes the recent advances in micro-/nano-structured biodegradable pressure sensor devices. In particular, we focus on the considerable improvement in performance and functionality at the device-level that has been achieved by adapting the geometrical design parameters in the micro- and nano-meter range. First, the material choices and sensing mechanisms available for fabricating micro-/nano-structured biodegradable pressure sensor devices are discussed. Then, this is followed by a historical development in the biodegradable pressure sensors. In particular, we highlight not only the fabrication methods and performances of the sensor device, but also their biocompatibility. Finally, we intoduce the recent examples of the micro/nano-structured biodegradable pressure sensor for biomedical applications.
Assuntos
Técnicas Biossensoriais , Próteses e ImplantesRESUMO
An alternative electrosynthesis of PdTe, using the electrochemical atomic layer deposition (E-ALD) method, is reported. The cyclic voltammetry technique was used to analyze Au substrate in copper (Cu2+), and a tellurous (Te4+) solution was used to identify UPDs and set the E-ALD cycle program. Results obtained using atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques reveal the nanometer-sized flat morphology of the systems, indicating the epitaxial characteristics of Pd and PdTe nanofilms. The effect of the Pd:Te ratio on the crystalline structure, electronic properties, and magnetic properties was investigated using a combination of density functional theory (DFT) and X-ray diffraction techniques. Te-containing electrocatalysts showed improved peak current response and negative onset potential toward ethanol oxidation (5 mA; -0.49 V) than Pd (2.0 mA; -0.3 V). Moreover, DFT ab initio calculation results obtained when the effect of Te content on oxygen adsorption was studied revealed that the d-band center shifted relative to the Fermi level: -1.83 eV, -1.98 eV, and -2.14 eV for Pd, Pd3Te, and Pd3Te2, respectively. The results signify the weakening of the CO-like species and the improvement in the PdTe catalytic activity. Thus, the electronic and geometric effects are the descriptors of Pd3Te2 activity. The results suggest that Pd2Te2 is a potential candidate electrocatalyst that can be used for the fabrication of ethanol fuel cells.
RESUMO
Engineering thermoplastics, such as poly(arylene ether sulfone), are more often synthesized using F-containing monomers rather than Cl-containing monomers because the F atom is considered more electronegative than Cl, leading to a better condensation polymerization reaction. In this study, the reaction's spontaneity improved when Cl atoms were used compared to the case using F atoms. Specifically, sulfonated poly(arylene ether sulfone) was synthesized by reacting 4,4'-dihydroxybiphenyl with two types of biphenyl sulfone monomers containing Cl and F atoms. No significant difference was observed in the structural, elemental, and chemical properties of the two copolymers based on nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, transmission electron microscopy, and electrochemical impedance spectroscopy. However, the solution viscosity and mechanical strength of the copolymer synthesized with the Cl-terminal monomers were slightly higher than those of the copolymer synthesized with the F-terminal monomers due to higher reaction spontaneity. The first-principle study was employed to elucidate the underlying mechanisms of these reactions.