The Use of Organic Rankine Cycles for Recovering the Heat Lost in the Compression Area of a Cryogenic Air Separation Unit.

The use of organic Rankine cycles (ORCs) is a viable solution for the recovery of waste heat. For an air separation unit (ASU) with a production of V˙O2=58300mN3/h operating in Romania, the value of utilization of the heat transferred to the cooling system of the compression area represents 21% of the global system electrical energy input. To recover this thermal energy and transform it into mechanical energy, an ORC system was proposed. To maximize the production of mechanical power, an exergy analysis was performed. Exergy analysis was used to choose the most suitable organic fluid and find the optimum constructive structure of the Rankine cycle. The calculation of the exergy destruction in the key apparatuses of the system allowed investigation into the optimization search procedure. The large exergy destruction in the liquid preheater suggested the decrease in the temperature difference in this part of the evaporator by increasing the inlet temperature of the liquid; and an internal recuperative heat exchanger was used for this purpose. When permitted, the overheating of the vapors also reduced the temperature difference between the heat source and the organic fluid during the heat transfer process. The analysis was comparatively performed for several organic fluids such as R-245fa, R123, n-pentane and R717. The use of ammonia, that offered the possibility of superheating the vapors at the turbine inlet, brought a gain of mechanical power corresponding to 6% economy in the electrical energy input of the global plant.

Exergetic Analysis of a Cryogenic Air Separation Unit.

This case study analyzes a cryogenic air separation unit (ASU) with a production of V˙O2=58,300 [m3Nh] of gaseous oxygen with a concentration greater than 98.5%, operating in Romania on a steel plant platform. The goal of the paper is to provide an extensive model of exergetic analysis that could be used in an optimization procedure when decisional parameters are changed or structural design modifications are implemented. For each key part of the Air Separation Unit, an exergetic product and fuel were defined and, based on their definition, the coefficient of performance of each functional zone was calculated. The information about the magnitude of the exergetic losses offers solutions for their future recovery. The analysis of the exergy destructions suggests when it is worth making a larger investment. The exergetic analysis of the compression area of the ASU points out an exergy destruction and loss of 37% from the total plant's electrical energy input. The exergy loss with the heat transferred to the cooling system of compressors can be recovered; for the exergy destruction portion, the challenge between investment and operating costs should be considered. The exergy destruction of the air separation columns found the High Pressure Column (HPC) to be more destructive than the Low Pressure Column. The share of the exergy destruction in the total plant's electrical energy input is 8.3% for the HPC. The local COP of the HPC, calculated depending on the total exergy of the local product and fuel, is 62.66%. The calculus of the air separation column is performed with the ChemSep simulator.

Glucose and glycerol temperature-pressure correlations for the design of cryopreservation protocols in an isochoric system at subfreezing temperature.

There is growing interest in the use of isochoric (constant volume) freezing for cryopreservation of biological matter. The goal of this study is to generate fundamental experimental data on the pressure temperature relation during the freezing of an isochoric system of aqueous solutions of two compounds, glucose and glycerol. Glucose and glycerol are commonly used as cryoprotectants in conventional isobaric (constant pressure) cryopreservation protocols. Earlier studies have shown that the increase in pressure during isochoric freezing is detrimental to biological matter and limits the range of temperatures in which isochoric freezing can be used for preservation to temperatures corresponding to pressures below 40 MPa. In physiological saline solution this pressure corresponds to a temperature of - 4 °C. Our new experimental data shows that the addition of 2 M glycerol to the saline solution lowers the temperature at which the isochoric freezing pressure is 40 MPa to -11 °C, 3 M glycerol to - 16.5 °C, and 4 M glycerol to - 24.5 °C, thereby substantially expending the range of temperatures in which cryopreservation by isochoric freezing can be practiced.

Isochoric and isobaric freezing of fish muscle.

We have recently shown that, a living organism, which succumbs to freezing to -4 °C in an isobaric thermodynamic system (constant atmospheric pressure), can survive freezing to -4 °C in an isochoric thermodynamic system (constant volume). It is known that the mechanism of cell damage in an isobaric system is the freezing caused increase in extracellular osmolality, and, the consequent cell dehydration. An explanation for the observed survival during isochoric freezing is the thermodynamic modeling supported hypothesis that, in the isochoric frozen solution the extracellular osmolality is comparable to the cell intracellular osmolality. Therefore, cells in the isochoric frozen organism do not dehydrate, and the tissue maintains its morphological integrity. Comparing the histology of: a) fresh fish white muscle, b) fresh muscle frozen to -5 °C in an isobaric system and c) fresh muscle frozen to -5 °C I in an isochoric system, we find convincing evidence of the mechanism of cell dehydration during isobaric freezing. In contrast, the muscle tissue frozen to -5 °C in an isochoric system appears morphologically identical to fresh tissue, with no evidence of dehydration. This is the first experimental evidence in support of the hypothesis that in isochoric freezing there is no cellular dehydration and therefore the morphology of the frozen tissue remains intact.

The nematode Caenorhabditis elegans survives subfreezing temperatures in an isochoric system.

This study is the first experimental evidence showing that a living multicellular organism, the nematode Caenorhabditis elegans, can survive subfreezing temperatures in an isochoric (constant volume) thermodynamic system, while immersed in a simple isotonic solution, without the addition of cryoprotectants. Some of the test conditions were more extreme than those found at the ice/water interface of the Antarctic subglacial Vostok lake. On earth, life takes place in an isobaric (constant pressure) environment. In isobaric systems, subfreezing temperature survival of organisms in nature and subfreezing temperature preservation of living material for biotechnology and medicine, is made possible by use of cryoprotective chemicals additives. Our theoretical thermodynamic studies suggested that in an isochoric system, living biological material could survive subfreezing temperatures, without any cryoprotective chemicals. By confirming the theoretical predictions, this paper suggests a new technology for subfreezing preservation of cells, organs and organisms of possible value for biotechnology and medicine as well as new possible mechanisms of living organism survival in nature.

Evaluation of hyaluronic acid-polymacrolactone hydrogels with 3D printing capacity.

The implementation of personalized patches, tailored to individual genetic profiles and containing specific amounts of bioactive substances, has the potential to produce a transformative impact within the medical sector. There are several methods of designing scaffolds in the context of personalized medicine, with three-dimensional (3D) printing emerging as a pivotal technique. This innovative approach can be used to construct a wide variety of pharmaceutical dosage forms, characterized by variations in shape, release profile, and drug combinations, allowing precise dose individualization and the incorporation of multiple therapeutic agents. To expand the potential and applicability of personalized medicine, particularly with regards to indomethacin (IND), a drug necessitating individualized dosing, this study proposes the development of new transdermal delivery systems for IND based on hyaluronic acid and a polylactone synthesized within our research group, namely poly(ethylene brasilate-co-squaric acid) (PEBSA). The obtained systems were characterized in terms of their swelling capacity, rheological behavior, and morphological characteristics that highlighted the formation of stable three-dimensional networks. To impart specific shape and geometry to the structures, multi-component systems based on PEBSA, HA, and methacrylate gelatin were obtained. The scaffolds were loaded with IND and subsequently 3D printed. The release capacity of IND and its dependence on the relative ratios of the components comprising the scaffold composition were highlighted. The cytocompatibility studies revealed the successful development of biocompatible and noncytotoxic systems.

Self-healing injectable hydrogels incorporating hyaluronic acid and phytic acid: Rheological insights and implications for regenerative medicine.

Eying the increasing impact of hyaluronic acid (HA) and its multifaceted applications, this study employs a non-toxic, one-pot strategy to develop injectable, self-healing hydrogels for biomedical applications. Phytic acid (PA), a plant-derived organic acid with high biocompatibility and numerous hydroxyl groups, can act as a cross-linking agent to form hydrogen-bonded networks with the HA chains. The study examined the optimal mass ratio of HA to PA to achieve superior hydrogel performance. Fourier transform infrared spectroscopy, rheological studies, and thermal analysis confirmed the successful formation of the hydrogels, which exhibited injectability, rapid self-healing, malleability, and elasticity. The investigation of different compositions revealed a sensitive influence of PA on the self-assembly phenomena of HA during flow. SEM cross-section images of the freeze-dried gels revealed a porous surface in the form of an interconnected network of microchannels. In addition, the hydrogel exhibits good tissue adhesion properties and promotes cell proliferation in biocompatibility tests on human gingival fibroblasts. The significance of this study lies in the ability of the proposed materials to be injected, to conform to the complex 3D structure of host tissues as well as their ability to recover after damage, indicating significant potential as scaffolds for wound healing.

Study on cellulose nanofibrils/copolymacrolactone based nano-composites with hydrophobic behaviour, self-healing ability and antioxidant activity.

The multiple uses of cellulose nanofibrils (CNFs) originate from their availability from renewable resources, and are due to their physico-chemical properties, biodegradability and biocompatibility. At the same time, reducing sensitivity to humidity, increasing interfacial adhesion and hydrophobic modification of the CNF surface to diversify applications and improve operation, are current targets pursued. This study focuses on the preparation of a novel gel structure using cellulose nanofibrils (CNFs) and poly(ethylene brassylate-co-squaric acid) (PEBSA50/50), a bio-based copolymacrolactone. The primary goal is to achieve the gel with reduced sensitivity to humidity and enhanced hydrophobic behaviour. The new system was characterized in comparison to its constituent components using various techniques, such as Fourier transform infrared spectroscopy, thermal analysis, X-ray diffraction, and NIR - chemical imaging. Rheological tests demonstrated the formation of the CNF_PEBSA50/50 gel as a result of physical interactions between the two polymeric partners and revealed self-healing abilities for the prepared gels. Determination of the contact angle, surface free energy, as well as dynamic measurements of the vapour sorption of the CNF_PEBSA50/50 system, confirmed the achievement of the study's aim. Furthermore, the CNF_PEBSA50/50 network was utilized to encapsulate citric acid, resulting in the creation of a new bioactive composite with both antioxidant and antimicrobial activity.

Automatic Detection of the Orientation of Strain Gauges Bonded on Composite Materials with Polymer Matrix, in Order to Reduce the Measurement Errors.

Composite materials with a polymer matrix are used on a large scale to make light structures that involve high responsibility. The failure mechanisms of composite materials are very complex and for this reason, advanced techniques for damage detection and the assessment of structural integrity are required. The continuous structural health monitoring (SHM) uses nondestructive testing (NDT) techniques, sensors integrated into the structures, computers and dedicated software. This article presents a new automatic and precise method for detecting the orientation of strain gauges glued onto composite materials with a polymer matrix. The automatic identification of both the directions of the reinforcing fibers and that of the orientation of the strain gauge, respectively, allows for the calculation of the angle between these two directions. By knowing the difference between the nominal value of this angle and the value actually obtained after gluing the strain gauge, corrections obtained by calculation on the experimental values can be applied, using equations found in specialized literature. In this way, a drastic reduction of measurement errors introduced by the misalignment of strain gauges glued on composite materials can be achieved, resulting in a significant increase of measurement accuracy, which contributes to increasing the security of the monitored structures.

Novel Bio-Based Materials: From Castor Oil to Epoxy Resins for Engineering Applications.

The paper presents the synthesis and thermal behavior of novel epoxy resins prepared from epoxidized castor oil in the presence of or without trimethylolpropane triglycidyl ether (TMP) crosslinked with 3-hexahydro-4-methylphtalic anhydride (MHHPA) and their comparison with a petroleum-based epoxy resin (MHHPA and TMP). Epoxidized castor oil (ECO) was obtained via in situ epoxidation of castor oil with peroxyacetic acid. The chemical structures of castor oil (CO), ECO, and epoxy matrix were confirmed using FT-IR and 1H-NMR spectroscopy. The morphological and thermal behavior of the resulting products have been investigated. Compared to petroleum-based resins, castor oil-based ones have a lower Tg. Anyway, the introduction of TMP increases the Tg of the resins containing ECO. The morphological behavior is not significantly influenced by using ECO or by adding TMP in the synthesis of resins. The dielectric properties of epoxy resins have been analyzed as a function of frequency (1 kHz-1 MHz) and temperature (-50 to 200 °C). The water absorption test showed that as Tg increased, the percent mass of water ingress decreased.

Analytical modelling of food storage cooling with solar ammonia-water absorption system, powered by parabolic trough collectors. Method.

The study presents a new analytical model capable to reveal the thermal behaviour of all the components of the solar ammonia-water absorption system, powered by parabolic trough collectors, serving different types of food storages: refrigeration chamber, refrigerated food storage, freezing chamber and frozen food storage. The heat inputs, that determine the total cooling load, for each food storage spaces consist of: heat gains through walls, heat gains through ventilation (fresh air), heat that must be dissipated from the stored products (technological cooling load required to cool down the products) and heat gains through operation. The influence of the number of solar parabolic trough collectors and of the storage tank size on different parameters of the refrigeration plant are investigated under low and high storage temperatures.•Food cooling with solar absorption refrigeration system.•Hourly based variation of NH3-H2O solar absorption system performances.•Long term simulation of solar absorption cooling for refrigeration and cooling.

New Hydrogels Based on Agarose/Phytagel and Peptides.

Short aromatic peptide derivatives, i.e., peptides or amino acids modified with aromatic groups, such as 9-fluorenylmethoxycarbonyl (Fmoc), can self-assemble into extracellular matrix-like hydrogels due to their nanofibrillar architecture. Among different types of amino acids, lysine (Lys) and glycine (Gly) are involved in multiple physiological processes, being key factors in the proper growth of cells, carnitine production, and collagen formation. The authors have previously successfully presented the possibility of obtaining supramolecular gels based on Fmoc-Lys-Fmoc and short peptides such as Fmoc-Gly-Gly-Gly in order to use them as a substrate for cell cultures. This paper investigates how the introduction of a gelling polymer can influence the properties of the network as well as the compatibility of the resulting materials with different cell types. A series of hydrogel compositions consisting of combinations of Fmoc-Lys-Fmoc and Fmoc-Gly-Gly-Gly with Agarose and Phytagel are thus obtained. All compositions form structured gels as shown by rheological studies and scanning electron microscopy. Fourier transform infrared spectroscopy analysis evidences the formation of H-bonds between the polysaccharides and amino acids or short peptides. Moreover, all gels exhibit good cell viability on fibroblasts as demonstrated by a live-dead staining test and good in vivo biocompatibility, which highlights the great potential of these biomaterials for biomedical applications.

Synthesis and Comparative Studies of Glucose Oxidase Immobilized on Fe3O4 Magnetic Nanoparticles Using Different Coupling Agents.

Squaric acid (SA) is a compound with potential to crosslink biomacromolecules. Although SA has become over the last years a well-known crosslinking agent as a result of its good biocompatibility, glutaraldehyde (GA), a compound with proven cytotoxicity is still one of the most used crosslinkers to develop nanomaterials. In this regard, the novelty of the present study consists in determining whether it may be possible to substitute GA with a new bifunctional and biocompatible compound, such as SA, in the process of enzyme immobilization on the surface of magnetic nanoparticles (MNPs). Thus, a direct comparison between SA- and GA-functionalized magnetic nanoparticles was realized in terms of physico-chemical properties and ability to immobilize catalytic enzymes. The optimal conditions of the synthesis of the two types of GOx-immobilized MNPs were described, thus emphasizing the difference between the two reagents. Scanning Electron Microscopy and Dynamic Light Scattering were used for size, shape and colloidal stability characterization of the pristine MNPs and of those coupled with GOx. Binding of GOx to MNPs by using GA or SA was confirmed by FT-IR spectroscopy. The stability of the immobilized and free enzyme was investigated by measuring the enzymatic activity. The study confirmed that the resulting activity of the immobilized enzyme and the optimization of enzyme immobilization depended on the type of reagent used and duration of the process. The catalytic performance of immobilized enzyme was tested, revealing that the long-term colloidal stability of SA-functionalized MNPs was superior to those prepared with GA. In conclusion, the SA-functionalized bioconjugates have a better potential as compared to the GA-modified nanosystems to be regarded as catalytic nanodevices for biomedical purposes such as biosensors.

Development of a new polymer network system carrier of essential oils.

The study presents the development of a new copolymacrolactone structure based on ethylene brassylate (EB) and squaric acid (SA) with different ratios between comonomers. The new system was tested as a network for essential oils encapsulation. The structure of the copolymers was confirmed by spectroscopic investigations and correlated in interdependence with the comonomers content. The interfacial characteristics of the poly(ethylene brassylate-co-squaric acid) copolymers were determined, and the transition from a moderate hydrophilic surface towards a hydrophobic region by increasing the molar content of SA comonomer was highlighted. The affinity for hydrophobic substances of the synthesised macromolecular compounds was used in a process of encapsulation of thymol (Thy) and carvacrol (CC). The newly prepared bioactive compounds were characterised by in vivo biocompatibility tests, and antimicrobial activity, Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC).

Preparation of an Antioxidant Assembly Based on a Copolymacrolactone Structure and Erythritol following an Eco-Friendly Strategy.

The study presents the achievement of a new assembly with antioxidant behaviour based on a copolymacrolactone structure that encapsulates erythritol (Eryt). Poly(ethylene brassylate-co-squaric acid) (PEBSA) was synthesised in environmentally friendly conditions, respectively, through a process in suspension in water by opening the cycle of ethylene brassylate macrolactone, followed by condensation with squaric acid. The compound synthesised in suspension was characterised by comparison with the polymer obtained by polymerisation in solution. The investigations revealed that, with the exception of the molecular masses, the compounds generated by the two synthetic procedures present similar properties, including good thermal stability, with a Tpeak of 456 °C, and the capacity for network formation. In addition, the investigation by dynamic light scattering techniques evidenced a mean diameter for PEBSA particles of around 596 nm and a zeta potential of -25 mV, which attests to their stability. The bio-based copolymacrolactone was used as a matrix for erythritol encapsulation. The new PEBSA-Eryt compound presented an increased sorption/desorption process, compared with the PEBSA matrix, and a crystalline morphology confirmed by X-ray diffraction analysis. The bioactive compound was also characterised in terms of its biocompatibility and antioxidant behaviour.

A comparison of freezing-damage during isochoric and isobaric freezing of the potato.

BACKGROUND: Freezing is commonly used for food preservation. It is usually done under constant atmospheric pressure (isobaric). While extending the life of the produce, isobaric freezing has detrimental effects. It causes loss of food weight and changes in food quality. Using thermodynamic analysis, we have developed a theoretical model of the process of freezing in a constant volume system (isochoric). The mathematical model suggests that the detrimental effects associated with isobaric freezing may be reduced in an isochoric freezing system. To explore this hypothesis, we performed a preliminary study on the isochoric freezing of a produce with which our group has experience, the potato. METHOD: Experiments were performed in an isochoric freezing device we designed. The device is robust and has no moving parts. For comparison, we used a geometrically identical isobaric freezing device. Following freezing and thawing, the samples were weighed, examined with colorimetry, and examined with microscopy. RESULTS: It was found that potatoes frozen to -5 °C in an isochoric system experienced no weight loss and limited enzymatic browning. In contrast the -5 °C isobaric frozen potato experienced substantial weight loss and substantial enzymatic browning. Microscopic analysis shows that the structural integrity of the potato is maintained after freezing in the isochoric system and impaired after freezing in the isobaric system. DISCUSSION: Tissue damage during isobaric freezing is caused by the increase in extracellular osmolality and the mechanical damage by ice crystals. Our thermodynamic analysis predicts that during isochoric freezing the intracellular osmolality remains comparable to the extracellular osmolality and that isochoric systems can be designed to eliminate the mechanical damage by ice. The results of this preliminary study seem to confirm the theoretical predictions. CONCLUSION: This is a preliminary exploratory study on isochoric freezing of food. We have shown that the quality of a food product preserved by isochoric freezing is better than the quality of food preserved to the same temperature in isobaric conditions. Obviously, more extensive research remains to be done to extend this study to lower freezing temperatures and other food items.

The effects of cinnamon supplementation on blood lipid concentrations: A systematic review and meta-analysis.

BACKGROUND: Cinnamon is a rich botanical source of polyphenols, whose positive effects on blood lipid concentrations have been hypothesized, but have not been conclusively studied. OBJECTIVE: The objective of the study was to systematically review and evaluate the effect of administration of cinnamon on blood lipid concentrations. METHODS: We assessed 13 randomized controlled trials with 750 participants investigating the effect of cinnamon supplementation on blood lipid concentrations. A meta-analysis was performed using random effect models, with weighted mean differences (WMDs; with 95% confidence interval [CI]) for endpoints calculated using a random effects model. RESULTS: No statistically significant effect of cinnamon was observed on blood low-density lipoprotein cholesterol (LDL-C; WMD: -0.16 mmol/L [-6.19 mg/dL], 95% CI: -0.35, 0.03 [-13.53, 1.16], P = .10) and high-density lipoprotein cholesterol (HDL-C; WMD: 0.05 mmol/L [1.92 mg/dL], 95% CI: -0.03, 0.12 [-0.03, 4.64], P = .21) concentrations. However, a statistically significant reduction in blood triglycerides (WMD: -0.27 mmol/L [-23.91 mg/dL], 95% CI: -0.39, -0.14 [-34.54, -12.40], P < .01) and total cholesterol concentrations (WMD: -0.36 mmol/L [-13.92 mg/dL], 95% CI: -0.63, -0.09 [-24.36, -3.48], P < .01) was observed. HDL-C was significantly elevated after the omission of 1 study (WMD: 0.04 mmol/L [1.54 mg/dL], 95% CI: 0.03, 0.06 [1.16, 2.32], P < .01) during our sensitivity analysis. A meta-regression analysis was conducted, and no significant association was found between changes in lipid parameters and cinnamon dose. In contrast, changes in blood levels of total cholesterol (slope: 0.09; 95% CI: 0.02, 0.16; P < .01), LDL-C (slope: 0.05; 95% CI: 0.001, 0.10; P = .05) and triglycerides (slope: 0.06; 95% CI: 0.04, 0.09; P < .01) were significantly and positively associated with the duration of supplementation. No statistically significant association was found between blood HDL-C changes and duration of supplementation. CONCLUSION: Cinnamon supplementation significantly reduced blood triglycerides and total cholesterol concentrations without any significant effect on LDL-C and HDL-C.

User Interface Design in Medical Distributed Web Applications.

User interfaces are important to facilitate easy learning and operating with an IT application especially in the medical world. An easy to use interface has to be simple and to customize the user needs and mode of operation. The technology in the background is an important tool to accomplish this. The present work aims to creating a web interface using specific technology (HTML table design combined with CSS3) to provide an optimized responsive interface for a complex web application. In the first phase, the current icMED web medical application layout is analyzed, and its structure is designed using specific tools, on source files. In the second phase, a new graphic adaptable interface to different mobile terminals is proposed, (using HTML table design (TD) and CSS3 method) that uses no source files, just lines of code for layout design, improving the interaction in terms of speed and simplicity. For a complex medical software application a new prototype layout was designed and developed using HTML tables. The method uses a CSS code with only CSS classes applied to one or multiple HTML table elements, instead of CSS styles that can be applied to just one DIV tag at once. The technique has the advantage of a simplified CSS code, and a better adaptability to different media resolutions compared to DIV-CSS style method. The presented work is a proof that adaptive web interfaces can be developed just using and combining different types of design methods and technologies, using HTML table design, resulting in a simpler to learn and use interface, suitable for healthcare services.

Effects of supplementation with pomegranate juice on plasma C-reactive protein concentrations: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Pomegranate juice (PJ) has a high content of antioxidants and bioactive polyphenols, being widely used for its antioxidant, anti-inflammatory and chemopreventive effects. PURPOSE: The objective of this meta-analysis consisted in investigating the impact of PJ on plasma C-reactive protein (CRP) concentrations. METHODS: The search included SCOPUS, Medline and two Iranian bibliographic databases namely MagIran and Scientific Information Database (from inception to December 09, 2014) to identify prospective trials for investigating the impact of pomegranate preparations on serum concentrations of CRP. Two independent reviewers extracted data on study characteristics, methods and outcomes. RESULTS: Among 427 participants in the selected studies, 216 were allocated to PJ groups, and 211 to control group. Meta-analysis of data from 5 eligible randomized controlled trials (RCTs) arms did not provide compelling evidence as to a significant CRP-lowering effect of supplementation with pomegranate juice (WMD: -0.22 mg/l, 95% CI: -0.45, 0.01, p = 0.061). The impact of pomegranate juice on plasma CRP levels was found to be independent of duration of supplementation (slope: 0.003; 95% CI: -0.005, 0.011; p = 0.444). CONCLUSION: In conclusion, this meta-analysis of data from 5 prospective trials did not indicate a significant effect of PJ on plasma CRP levels, and this effect was independent of duration of supplementation.

Eosinophilic ascites in a patient with toxocara canis infection. A case report.

We report the case of a young female patient, admitted for a recent ascites of unknown origin. The acute onset was with colicky abdominal pain and peritoneal effusion, which led to the suspicion of perforated ulcer. A diagnostic laparoscopy was performed which showed free peritoneal fluid and normal abdominal viscera. At upper gastro-intestinal endoscopy, performed a few days later, patchy erythema in the antral region and duodenal edema were revealed. Duodenal biopsies showed marked eosinophilic infiltration. The ascitic fluid was straw coloured, sterile with 90% eosinophils. Eosinophilic gastroenteritis was suspected, but differential diagnosis required the exclusion of migrant parasites. The stool exams were negative but serology for Toxocara antibodies was positive. The treatment with albendazole (Zentel 400 mg twice a day for 5 days) led to the disappearance of signs and symptoms. The eosinophilic infiltrate of the gut was absent in duodenal biopsies taken two months later.