Highly selective synthesis of surface FeIV=O with nanoscale zero-valent iron and chlorite for efficient oxygen transfer reactions.

High-valent iron-oxo species (FeIV=O) has been a long-sought-after oxygen transfer reagent in biological and catalytic chemistry but suffers from a giant challenge in its gentle and selective synthesis. Herein, we propose a new strategy to synthesize surface FeIV=O (≡FeIV=O) on nanoscale zero-valent iron (nZVI) using chlorite (ClO2-) as the oxidant, which possesses an impressive ≡FeIV=O selectivity of 99%. ≡FeIV=O can be energetically formed from the ferrous (FeII) sites on nZVI through heterolytic Cl-O bond dissociation of ClO2- via a synergistic effect between electron-donating surface ≡FeII and proximal electron-withdrawing H2O, where H2O serves as a hydrogen-bond donor to the terminal O atom of the adsorbed ClO2- thereby prompting the polarization and cleavage of Cl-O bond for the oxidation of ≡FeII toward the final formation of ≡FeIV=O. With methyl phenyl sulfoxide (PMS16O) as the probe molecule, the isotopic labeling experiment manifests an exclusive 18O transfer from Cl18O2- to PMS16O18O mediated by ≡FeIV=18O. We then showcase the versatility of ≡FeIV=O as the oxygen transfer reagent in activating the C-H bond of methane for methanol production and facilitating selective triphenylphosphine oxide synthesis with triphenylphosphine. We believe that this new ≡FeIV=O synthesis strategy possesses great potential to drive oxygen transfer for efficient high-value-added chemical synthesis.

Photochemical Acceleration of Ammonia Production by Pt1-Ptn-TiN Reduction and N2 Activation.

Stable metal nitrides (MN) are promising materials to fit the future "green" ammonia-hydrogen nexus. Either through catalysis or chemical looping, the reductive hydrogenation of MN to MN1-x is a necessary step to generate ammonia. However, encumbered by the formation of kinetically stable M-NH1─3 surface species, this reduction step remains challenging under mild conditions. Herein, we discovered that deleterious Ti-NH1─3 accumulation on TiN can be circumvented photochemically with supported single atoms and clusters of platinum (Pt1-Ptn) under N2-H2 conditions. The photochemistry of TiN selectively promoted Ti-NH formation, while Pt1-Ptn effectively transformed any formed Ti-NH into free ammonia. The generated ammonia was found to originate mainly from TiN reduction with a minor contribution from N2 activation. The knowledge accrued from this fundamental study could serve as a springboard for the development of MN materials for more efficient ammonia production to potentially disrupt the century-old fossil-powered Haber-Bosch process.

Oxalate-Promoted SO2 Uptake and Oxidation on Iron Minerals: Implications for Secondary Sulfate Aerosol Formation.

Mineral dust serves as a significant source of sulfate aerosols by mediating heterogeneous sulfur dioxide (SO2) oxidation in the atmosphere. Given that a considerable proportion of small organic acids are deposited onto mineral dust via long-range transportation, understanding their impact on atmospheric SO2 transformation and sulfate formation is of great importance. This study investigates the effect of oxalate on heterogeneous SO2 uptake and oxidation phenomenon by in situ FTIR, theoretical calculation, and continuous stream experiments, exploiting hematite (Fe2O3) as an environmental indicator. The results highlight the critical role of naturally deposited oxalate in mononuclear monodentate coordinating surface Fe atoms of Fe2O3 that enhances the activation of O2 for oxidizing SO2 into sulfate. Meanwhile, oxalate increases the hygroscopicity of Fe2O3, facilitating H2O dissociation into reactive hydroxyl groups and further augmenting the SO2 uptake capacity of Fe2O3. More importantly, other conventional iron minerals, such as goethite and magnetite, as well as authentic iron-containing mineral dust, exhibit similar oxalate-promoted sulfate accumulation behaviors. Our findings suggest that oxalate-assisted SO2 oxidation on iron minerals is one of the important contributors to secondary sulfate aerosols, especially during the nighttime with high relative humidity.

Surface Hydrogen Bond-Induced Oxygen Vacancies of TiO2 for Two-Electron Molecular Oxygen Activation and Efficient NO Oxidation.

Defect engineering can provide a feasible approach to achieving ambient molecular oxygen activation. However, conventional surface defects (e.g., oxygen vacancies, OVs), featured with the coordinatively unsaturated metal sites, often favor the reduction of O2 to •O2- rather than O22- via two-electron transfer, hindering the efficient pollutant removal with high electron utilization. Herein, we demonstrate that this bottleneck can be well discharged by modulating the electronic structure of OVs via phosphorization. As a proof of concept, TiO2 nanoparticles are adopted as a model material for NaH2PO2 (HP) modification, in which HP induces the formation of OVs via weakening the Ti-O bonds through the hydrogen bond interactions. Additionally, the formed Ti-O-P covalent bond refines the electronic structure of OVs, which enables rapid electron transfer for two-electron molecular oxygen activation. As exemplified by NO oxidation, HP-modified TiO2 with abundant OVs achieved complete NO removal with high selectivity for benign nitrate, superior to that of pristine TiO2. This study highlights a promising approach to regulate the O2 activation via an electronic structure modulation and provides fresh insights into the rational design of a photocatalyst for environmental remediation.

Hydroxyl Radical-Mediated Efficient Photoelectrocatalytic NO Oxidation with Simultaneous Nitrate Storage Using A Flow Photoanode Reactor.

The selective conversion of dilute NO pollutant into low-toxic product and simultaneous storage of metabolic nitrogen for crop plants remains a great challenge from the perspective of waste management and sustainable chemistry. This study demonstrates that this bottleneck can be well tackled by refining the reactive oxygen species (ROS) on Ni-modified NH2 -UiO-66(Zr) (Ni@NU) using nickel foam (NF) as a three-dimensional (3D) substrate through a flow photoanode reactor via the gas-phase photoelectrocatalysis. By rationally refining the ROS to ⋅OH, Ni@NU/NF can rapidly eliminate 82 % of NO without releasing remarkable NO2 under a low bias voltage (0.3 V) and visible light irradiation. The abundant mesoporous pores on Ni@NU/NF are conducive to the diffusion and storage of the formed nitrate, which enables the progressive conversion NO into nitrate with selectivity over 99 % for long-term use. Through calculation, 90 % of NO could be recovered as the nitrate species, indicating that this state-of-the-art strategy can capture, enrich and recycle the pollutant N source from the atmosphere. This study offers a new perspective of NO pollutant treatment and sustainable nitrogen exploitation, which may possess great potential to the development of highly efficient air purification systems for industrial and indoor NOx control.

Vacancy-Rich and Porous NiFe-Layered Double Hydroxide Ultrathin Nanosheets for Efficient Photocatalytic NO Oxidation and Storage.

An appealing strategy in the direction of circular chemistry and sustainable nitrogen exploitation is to efficiently convert NOx pollutants into low-toxic products and simultaneously provide crop plants with metabolic nitrogen. This study demonstrates that such a scenario can be realized by a defect- and morphology-coengineered Ni-Fe-layered double hydroxide (NiFe-LDH) comprising ultrathin nanosheets. Rich oxygen vacancies are introduced onto the NiFe-LDH surface, which facilitate charge carrier transfer and enable photocatalytic O2 activation into superoxide radicals (•O2-) under visible light. •O2- on NiFe-LDH thermodynamically oxidizes NO into nitrate with selectivity over 92%, thus suppressing dangerous NO2 emissions. By merit of abundant mesopores on NiFe-LDH ultrathin nanosheets bearing a high surface area (103.08 m2/g), nitrate can be readily stored without compromising the NO oxidation reactivity or selectivity for long-term usage. The nitrate species can be easily washed off the NiFe-LDH surface and then enriched in the liquid form as easy-to-use chemicals.

An Electrochemical Strategy for Simultaneous Heavy Metal Complexes Wastewater Treatment and Resource Recovery.

Heavy metals chelated with coexisting organic ligands in wastewater impose severe risks to public health and the ambient ecosystem but are also valuable metal resources. For sustainable development goals, the treatment of heavy metal complexes wastewater requires simultaneous metal-organic bond destruction and metal resource recovery. In this study, we demonstrated that a neutral pH electro-Fenton (EF) system, which was composed of an iron anode, carbon cloth cathode, and sodium tetrapolyphosphate electrolyte (Na6TPP), could induce a successive single-electron activation pathway of molecular oxygen due to the formation of Fe(II)-TPP complexes. The boosted •OH generation in the Na6TPP-EF process could decomplex 99.9% of copper ethylene diamine tetraacetate within 8 h; meanwhile, the released Cu ions were in situ deposited on the carbon cloth cathode in the form of Cu nanoparticles with a high energy efficiency of 2.45 g kWh-1. Impressively, the recovered Cu nanoparticles were of purity over 95.0%. More importantly, this neutral EF strategy could realize the simultaneous removal of Cu, Ni, and Cr complexes from real electroplating effluents. This study provides a promising neutral EF system for simultaneous heavy metal complexes wastewater treatment and resource recovery and sheds light on the importance of molecular oxygen activation in the field of pollutant control.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx.

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO2 was designed for photo-induced treating low-concentration NOx indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional •O2- reactive species, a synergic effect between a singlet oxygen (1O2) and mobile hydroxyl radicals (•OHf) was first illustrated for removing NOx indoor gas (1O2 + 2NO → 2NO2, NO2 + •OHf → HNO3), inhibiting the production of the byproducts of NO2. This work is helpful for understanding the surface mechanism of photocatalytic NOx oxidation and provides a new perspective for the development of highly efficient air purification systems.

Kirkendall Effect Boosts Phosphorylated nZVI for Efficient Heavy Metal Wastewater Treatment.

Removal of non-biodegradable heavy metals has been the top priority in wastewater treatment and the development of green technologies remains a significant challenge. We demonstrate that phosphorylated nanoscale zero-valent iron (nZVI) is promising for removal of heavy metals (NiII , CuII , CrVI , HgII ) via a boosted Kirkendall effect. Phosphorylation confines tensile hoop stress on the nZVI particles and "breaks" the structurally dense spherical nZVI to produce numerous radial nanocracks. Exemplified by NiII removal, the radial nanocracks favor the facile inward diffusion of NiII and the rapid outward transport of electrons and ferrous ions through the oxide shell for surface (NiII /electron) and boundary (NiII /Fe0 ) galvanic exchange. Accompanied by a pronounced hollowing phenomenon, phosphorylated nZVI can instantly reduce and immobilize NiII throughout the oxide shell with a high capacity (258 mg Ni g-1 Fe). For real electroplating factory wastewater treatment, this novel nZVI performs simultaneous NiII and CuII removal, producing effluent of stable quality that meets local discharge regulations.

Hydrogen Spillover to Oxygen Vacancy of TiO2-xHy/Fe: Breaking the Scaling Relationship of Ammonia Synthesis.

Optimizing kinetic barriers of ammonia synthesis to reduce the energy intensity has recently attracted significant research interest. The motivation for the research is to discover means by which activation barriers of N2 dissociation and NHz (z = 1-2, surface intermediates) destabilization can be reduced simultaneously, that is, breaking the "scaling relationship". However, by far only a single success has been reported in 2016 based on the discovery of a strong-weak N-bonding pair: transition metals (nitrides)-LiH. Described herein is a second example that is counterintuitively founded upon a strong-strong N-bonding pair unveiled in a bifunctional nanoscale catalyst TiO2-xHy/Fe (where 0.02 ≤ x ≤ 0.03 and 0 < y < 0.03), in which hydrogen spillover (H) from Fe to cascade oxygen vacancies (OV-OV) results in the trapped form of OV-H on the TiO2-xHy component. The Fe component thus enables facile activation of N2, while the OV-H in TiO2-xHy hydrogenates the N or NHz to NH3 easily.

Interfacial Charging-Decharging Strategy for Efficient and Selective Aerobic NO Oxidation on Oxygen Vacancy.

Intelligent defect engineering to harness surface molecular processes is at the core of selective oxidation catalysis. Here, we demonstrate that the two-electron-trapped oxygen vacancy (VO) of BiOCl, a prototypical F center (VŐ''), is a superb site to confine O2 toward efficient and selective NO oxidation to nitrate. Stimulated by solar light, VŐ'' accomplishes NO oxidation through a two-electron charging (VŐ'' + O2 → VŐ''-O22-) and subsequent one-electron decharging process (VŐ''-O22- + NO → VO-NO3- + e-). The back-donated electron is retrapped by VO to produce a new single-electron-trapped VO (VO'), simultaneously triggering a second round of NO oxidation (VO'-O2 + NO → VO-NO3-). This unprecedented interfacial charging-decharging scheme alters the peroxide-associated NO oxidation selectivity from NO2 to NO3- with a high efficiency and thus hold great promise for the treatment of risky NO x species in indoor air.

Oxygen Vacancies Promoted the Selective Photocatalytic Removal of NO with Blue TiO2 via Simultaneous Molecular Oxygen Activation and Photogenerated Hole Annihilation.

Semiconductor photocatalytic technology has great potential for the removal of dilute gaseous NO in indoor and outdoor atmospheres but suffers from unsatisfactory NO-removal selectivity due to undesirable NO2 byproduct generation. In this study, we demonstrate that the 99% selectivity of photocatalytic NO oxidation toward nitrate can be achieved over blue TiO2 bearing oxygen vacancies (OVs) under visible-light irradiation. First-principles density functional theory calculation and experimental results suggested that the OVs of blue TiO2 with localized electrons could facilitate the molecular oxygen activation through single-electron pathways to generate ·O2- and simultaneously promote the photogenerated hole annihilation. The generated ·O2- directly converted NO to nitrate, while the hole annihilation inhibited the side-reaction between holes and NO to avoid toxic NO2 byproduct formation, resulting in the highly selective removal of NO. This study reveals the dual functions of OVs in defective photocatalysts and also provides fundamental guidance for the selective purification of NO with photocatalytic technology.

Oxygen Vacancies Mediated Complete Visible Light NO Oxidation via Side-On Bridging Superoxide Radicals.

It is of a great challenge to seek for semiconductor photocatalysts with prominent reactivity to remove kinetically inert dilute NO without NO2 emission. In this study, complete visible light NO oxidation mediated by O2 is achieved over a defect-engineered BiOCl with selectivity exceeding 99%. Well-designed oxygen vacancies on the prototypical (001) surface of BiOCl favored the possible formation of geometric-favorable superoxide radicals (•O2-) in a side-on bridging mode under ambient condition, which thermodynamically suppressed the terminal end-on •O2- associated NO2 emission in case of higher temperatures, and thus selectively oxidized NO to nitrate. These findings can help us to understand the intriguing surface chemistry of photocatalytic NO oxidation and design highly efficient NO x removal systems.

Visible Light Driven Organic Pollutants Degradation with Hydrothermally Carbonized Sewage Sludge and Oxalate Via Molecular Oxygen Activation.

Converting sewage sludge into functional environmental materials has become an attractive sewage sludge disposal route. In this study, we synthesize a sewage sludge-based material via a facile one-pot hydrothermal carbonization method and construct a visible light molecular oxygen activation system with hydrothermally carbonized sewage sludge (HTC-S) and oxalate to degrade various organic pollutants. It was found that iron species of HTC-S could chelate with oxalate to generate H2O2 via molecular oxygen activation under visible light, and also promote the H2O2 decomposition to produce •OH for the fast organic pollutants degradation. Taking sulfadimidine as the example, the apparent degradation rate of HTC-S/oxalate system was almost 5-20 times that of iron oxides/oxalate system. This outstanding degradation performance was attributed to the presence of iron-containing clay minerals in HTC-S, as confirmed by X-ray diffraction measurements and Mössbauer spectrometry. In the oxalate solution, these iron-containing clay minerals could be excited more easily than common iron oxides under visible light, because the silicon species strongly interacted with iron species in HTC-S to form Fe-O-Si bond, which lowered the excitation energy of Fe-oxalate complex. This work provides an alternative sewage sludge conversion pathway and also sheds light on the environmental remediation applications of sewage sludge-based materials.

A Two-color Single-molecule Sequencing Platform and Its Clinical Applications.

DNA sequencers have become increasingly important research and diagnostic tools over the past 20 years. In this study, we developed a single-molecule desktop sequencer, GenoCare 1600 (GenoCare), which utilizes amplification-free library preparation and two-color sequencing-by-synthesis chemistry, making it more user-friendly compared with previous single-molecule sequencing platforms for clinical use. Using the GenoCare platform, we sequenced an Escherichia coli standard sample and achieved a consensus accuracy exceeding 99.99%. We also evaluated the sequencing performance of this platform in microbial mixtures and coronavirus disease 2019 (COVID-19) samples from throat swabs. Our findings indicate that the GenoCare platform allows for microbial quantitation, sensitive identification of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, and accurate detection of virus mutations, as confirmed by Sanger sequencing, demonstrating its remarkable potential in clinical application.

Locally Asymmetric BiOBr for Efficient Exciton Dissociation and Selective O2 Activation toward Oxidative Coupling of Amines.

Two-dimensional (2D) layered photocatalysts with highly ordered out-of-plane symmetry usually display robust excitonic effects, thus being ineffective in driving catalytic reactions that necessitate unchained charge carriers. Herein, taking 2D BiOBr as a prototype model, we implement a superficial asymmetric [Br-Bi-O-Bi] stacking in the out-of-plane direction by selectively stripping off the top-layer Br of BiOBr. This local asymmetry disrupts the diagnostic confinement configuration of BiOBr to urge energetic exciton dissociation into charge carriers and further contributes to the emergence of a surface dipole field that powers the subsequent separation of transient electron-hole pairs. Distinct from the symmetric BiOBr, which activates O2 into 1O2 via an exciton-mediated energy transfer, surface asymmetric BiOBr favors selective O2 activation into ·O2- for a broad range of amine-to-imine conversions. Our work here not only presents a paradigm for asymmetric photocatalyst design but also expands the toolkit available for regulating exciton behaviors in semiconductor photocatalytic systems.

Azadirachtin Inhibits Nuclear Receptor HR3 in the Prothoracic Gland to Block Larval Ecdysis in the Fall Armyworm, Spodoptera frugiperda.

Azadirachtin has been used to control agricultural pests for a long time; however, the molecular mechanism of azadirachtin on lepidopterans is still not clear. In this study, the fourth instar larvae of fall armyworm were fed with azadirachtin, and then the ecdysis was blocked in the fourth instar larval stage (L4). The prothoracic glands (PGs) of the treated larvae were dissected for RNA sequencing to determine the effect of azadirachtin on ecdysis inhibition. Interestingly, one of the PG-enriched genes, the nuclear hormone receptor 3 (HR3), was decreased after azadirachtin treatment, which plays a critical role in the 20-hydroxyecdysone action during ecdysis. To deepen the understanding of azadirachtin on ecdysis, the HR3 was knocked out by using the CRISPR/Cas9 system, while the HR3 mutants displayed embryonic lethal phenotype; thus, the stage-specific function of HR3 during larval molting was not enabled to unfold. Hence, the siRNA was injected into the 24 h L4 larvae to knock down HR3. After 96 h, the injected larvae were blocked in the old cuticle during ecdysis which is consistent with the azadirachtin-treated larvae. Taken together, we envisioned that the inhibition of ecdysis in the fall armyworm after the azadirachtin treatment is due to an interference with the expression of HR3 in PG, resulting in larval mortality. The results in this study specified the understanding of azadirachtin on insect ecdysis and the function of HR3 in lepidopteran in vivo.

Zero-valent iron coupled calcium hydroxide: A highly efficient strategy for removal and magnetic separation of concentrated fluoride from acidic wastewater.

The removal of concentrated fluoride in acidic wastewater by the conventional Ca(OH)2 method is challenged by the insufficient efficiency and difficult separation of fine CaF2 precipitate. Herein, we construct a strategy to tackle these challenges by coupling zero-valent iron (ZVI) with Ca(OH)2. ZVI reduces fluoride concentration from 12,000 to 3980 mg L-1 under optimal conditions primarily through the in-situ growth of porous FeF2·4H2O shell on its surface, which simultaneously assists fluoride removal via adsorption. The residual fluoride after ZVI treatment then decreases to 6.74 mg L-1 via precipitation with Ca(OH)2. Interestingly, the iron ions dissolved from ZVI also participate in the precipitation to form magnetite. This co-precipitation reinforces the fluoride removal and meanwhile endows the resulted precipitates with magnetism, thus enabling the perfect solid-liquid separation by the magnetic field before discharge. The application prospect of this coupling strategy is further verified by its ability in decreasing the concentrations of fluoride and other coexisting heavy metals (Zn2+, Cd2+ and Pb2+) in real smeltery wastewater below their discharge limitations. This study provides a promising strategy for the treatment of concentrated fluoride in acidic wastewater and also highlights ZVI as a good candidate to couple with conventional methods for enhanced pollution control.

Plasmonic O2 dissociation and spillover expedite selective oxidation of primary C-H bonds.

Manipulating O2 activation via nanosynthetic chemistry is critical in many oxidation reactions central to environmental remediation and chemical synthesis. Based on a carefully designed plasmonic Ru/TiO2-x catalyst, we first report a room-temperature O2 dissociation and spillover mechanism that expedites the "dream reaction" of selective primary C-H bond activation. Under visible light, surface plasmons excited in the negatively charged Ru nanoparticles decay into hot electrons, triggering spontaneous O2 dissociation to reactive atomic ˙O. Acceptor-like oxygen vacancies confined at the Ru-TiO2 interface free Ru from oxygen-poisoning by kinetically boosting the spillover of ˙O from Ru to TiO2. Evidenced by an exclusive isotopic O-transfer from 18O2 to oxygenated products, ˙O displays a synergistic action with native ˙O2 - on TiO2 that oxidizes toluene and related alkyl aromatics to aromatic acids with extremely high selectivity. We believe the intelligent catalyst design for desirable O2 activation will contribute viable routes for synthesizing industrially important organic compounds.

Ultrafast Microwave Polarizing Electrons to Form Vertically Aligned Metal Hybrids as Lithiophilic Buffer for Lithium-Metal Batteries.

Lithium-metal batteries (LMBs) have attracted great attention because of their high theoretical capacity and low electrochemical potential. However, uncontrollable Li dendrite growth and significant volume expansion result in safety issues that largely limit their practical applications. Herein, we explore a microwave-assisted strategy for the rapid synthesis of vertically aligned metal hybrids on Cu foil (VAMH@CF). Such an elaborate architecture of VAMH provides a lithiophilic buffer layer after prelithiation, offering vast nucleation sites/seeds for Li deposition (Li@VAMH@CF) and lower nucleation overpotential. Consequently, Li@VAMH@CF exhibits an outstanding cyclability with a long lifespan (up to 5500 cycles) and a low voltage hysteresis (28 mV) in a symmetrical cell at 3 mA cm-2. LiFePO4||Li@VAMH@CF full cells deliver a reversible capacity of about 140 mAh g-1 for 200 cycles, further demonstrating opportunities of the microwave-involved strategy for optimizing Li-metal anodes.