RESUMO
In this study, novel high throughput metal waste chips and foam electrodes were developed for the electrocoagulation of graywater for the first time. The developed electrodes were then compared with traditional metal plate electrodes, which showed higher efficiency of developed electrodes. The effective parameters of pH, electrode distance, applied voltage, and reaction time on COD removal were optimized using RSM as a multivariate optimization technique, and the data were analyzed by ANOVA, normal plot, residual distribution, and 3D plots. The optimal conditions for electrocoagulation of graywater using metal (Al) plate electrode were determined as a pH of 6.86, electrode distance of 5 mm, and applied voltage of 5 V for a reaction time of 10 min, resulting in 89.1% COD removal and 74% turbidity removal. Finally, the performance of aluminum plate electrodes, foam electrodes, and electrodes made from metal waste chips was compared using COD removal efficiency as the index, revealing 84%, 93%, and 87% COD removal, respectively. These results demonstrated that the newly developed electrodes are suitable for graywater treatment with excellent COD removal efficiency, metal chip waste recycling, and cost-saving.