Exogenous compound bacteria enhance the nutrient removal efficiency of integrated bioremediation systems: Functional genes and microorganisms play key roles.

With the continuous development of intensive mariculture, the application of the integrated bioremediation system of aquaculture wastewater (IBSAW) is increasingly promoted. However, the process and nutrients removal performance of the IBSAW need to be further optimized due to its immature technologies. In this study, exogenous compound bacteria (ECB) were added to IBSAW to investigate its pollutants removal efficiency and the relevant mechanisms. High-throughput sequencing and Geochip gene array were used to analyze the correlation between nutrients and bacteria, and the abundance of N and P cycling genes were quantified. Multivariable statistics, dimensionality reduction analysis, and network analysis were applied to explore the mechanisms of IBSAW operation. The results showed that the nutrients decreased significantly after adding ECB, with the brush treatment group significantly outperforming the ceramsite in removing NO3- and PO43-. Ceramsite has an advantage in removing NO2--N. The addition of ECB and different substrates significantly affected the composition of bacterial communities. The contents of nosZ and nirKS related to denitrification in the treatment groups were significantly higher than those in the control group, and the contents in the brush treatment group were significantly higher than that of ceramsite. The biomarkers Psychroserpens and Ruegeria on the biofilm of the brush treatment group were positively correlated with nirKS, while Mycobacterium, Erythrobacter and Paracoccus, Pseudohaliea in the ceramsite group were positively correlated with nirS and nirK, respectively. Therefore, it is speculated that the ECB significantly promoted the increase of denitrification bacteria by affecting the composition of bacterial communities, and the ECB combined with functional genera improved the efficiency of nutrients removal in the system. This study provided a reference for understanding the process and mechanism of nutrients removal, optimizing the wastewater purification technology of the IBSAW and improving the performance of the system.

First-Principles Investigation of Phosphorus-Doped Graphitic Carbon Nitride as Anchoring Material for the Lithium-Sulfur Battery.

The utilization of lithium-sulfur battery is hindered by various challenges, including the "shuttle effect", limited sulfur utilization, and the sluggish conversion kinetics of lithium polysulfides (LiPSs). In the present work, a theoretical design for the viability of graphitic carbon nitride (g-C3N4) and phosphorus-doping graphitic carbon nitride substrates (P-g-C3N4) as promising host materials in a Li-S battery was conducted utilizing first-principles calculations. The PDOS shows that when the P atom is introduced, the 2p of the N atom is affected by the 2p orbital of the P atom, which increases the energy band of phosphorus-doping substrates. The energy bands of PC and Pi are 0.12 eV and 0.20 eV, respectively. When the lithium polysulfides are adsorbed on four substrates, the overall adsorption energy of PC is 48-77% higher than that of graphitic carbon nitride, in which the charge transfer of long-chain lithium polysulfides increase by more than 1.5-fold. It is found that there are powerful Li-N bonds between lithium polysulfides and P-g-C3N4 substrates. Compared with the graphitic carbon nitride monolayer, the anchoring effect of the LiPSs@P-g-C3N4 substrate is enhanced, which is beneficial for inhibiting the shuttle of high-order lithium polysulfides. Furthermore, the catalytic performance of the P-g-C3N4 substrate is assessed in terms of the S8 reduction pathway and the decomposition of Li2S; the decomposition energy barrier of the P-g-C3N4 substrate decrease by 10% to 18%. The calculated results show that P-g-C3N4 can promote the reduction of S8 molecules and Li-S bond cleavage within Li2S, thus improving the utilization of sulfur-active substances and the ability of rapid reaction kinetics. Therefore, the P-g-C3N4 substrates are a promising high-performance lithium-sulfur battery anchoring material.

Stability and Semiconducting Behavior of Magnesium Polysulfides by Nonequivalent sp3 Hybridizations.

The Mg/S battery has attracted enormous interest in recent years due to its high theoretical capacity, low cost, and high security. However, the understanding of many intermediate magnesium polysulfides in the Mg/S battery remains elusive. Combining extensive structural search and first-principles calculations, we investigate the phase stability, structural character, and electronic structure of magnesium polysulfides in a wide range from MgS to MgS8. The pyrite-type MgS2 (space group: Pa3̅) is predicted to be stable. Five magnesium polysulfides, MgSx (x = 3, 4, 5, 6, and 8), are found to be metastable, with formation enthalpies slightly above the convex hull. S2 dimer, "V"-like S3, and highly distorted Sx chains are found for the polysulfides with bond lengths close to or slightly longer than S8 and bond angles similar to S8. A wide range of band gaps (0.77-2.82 eV) are revealed for the polysulfides due to the contribution of the nonequivalent sp3 hybridization of the S atoms in Sx2-. Our results can help to further understand the electrochemical process in the Mg/S battery.

High Coulomb Efficiency Sn-Co Alloy/rGO Composite Anode Material for Li-ion Battery with Long Cycle-Life.

The low cycle performance and low Coulomb efficiency of tin-based materials confine their large-scale commercial application for lithium-ion batteries. To overcome the shortage of volume expansion of pristine tin, Sn-Co alloy/rGO composites have been successfully synthesized by chemical reduction and sintering methods. The effects of sintering temperature on the composition, structure and electrochemical properties of Sn-Co alloy/rGO composites were investigated by experimental study and first-principles calculation. The results show that Sn-Co alloys are composed of a large number of CoSn and trace CoSn2 intermetallics, which are uniformly anchored on graphene nanosheets. The sintering treatment effectively improves the electrochemical performance, especially for the first Coulomb efficiency. The first charge capacity of Sn-Co alloy/rGO composites sintered at 450 °C is 675 mAh·g-1, and the corresponding Coulomb efficiency reaches 80.4%. This strategy provides a convenient approach to synthesizing tin-based materials for high-performance lithium-ion batteries.

Self-Assembly of Copolymers Containing Crystallizable Blocks: Strategies and Applications.

The self-assembly of copolymers containing crystallizable blocks in solution has received increasing attention in the past few years. Various strategies including crystallization-driven self-assembly (CDSA) and polymerization-induced CDSA (PI-CDSA) have been widely developed. Abundant self-assembly morphologies are captured and advanced applications have been attempted. In this review, the synthetic strategies including the mechanisms and characteristics are highlighted and a survey on the advanced applications of crystalline nano-assemblies is collected. This review is hoped to depict a comprehensive outline for self-assembly of copolymers containing crystallizable blocks in recent years and to prompt the development of the self-assembly technology in interdisciplinary fields.

A Pt-Ir nanocube amplified lateral flow immunoassay for dehydroepiandrosterone.

The traditional gold-nanoparticle-based lateral flow immunoassay (LFIA) cannot satisfy the requirements for the sensitive detection of dehydroepiandrosterone (DHEA) in human urine. To enhance the sensitivity of the LFIA, platinum-iridium nanocubes (Pt-Ir NCs) with high catalytic efficiency and stability were synthesized and labelled with polyclonal antibody (pAb) to form a pAb-Pt-Ir probe. For the detection of DHEA, a novel LFIA with Pt-Ir NCs as an optical label and an enhanced LFIA in which the peroxidase-like activity of the Pt-Ir NCs was triggered by the introduction of the chromogenic substrate 3-amino-9-ethyl-carbazole (AEC) were developed and compared with a LFIA with platinum nanocubes (PtNCs) as an optical label. The visual limit of detection was 0.5 ng mL-1 for Pt-Ir-LFIA and 0.05 ng mL-1 for AEC-enhanced Pt-Ir-LFIA, in comparison to 100 ng mL-1 for PtNCs-LFIA and 50 ng mL-1 for AEC-enhanced PtNCs-LFIA. The average recoveries from spiked urine samples ranged from 90.8% to 110.4%, with a coefficient of variation below 12.6%, suggesting the accuracy and reliability of our developed immunoassay. Achieving excellent sensitivity, specificity, and reproducibility, Pt-Ir-LFIA provided a promising platform for monitoring DHEA.

Design, synthesis and biological evaluation of novel pleuromutilin derivatives as potent anti-MRSA agents targeting the 50S ribosome.

A series of novel pleuromutilin derivatives were designed and synthesized with 1,2,4-triazole as the linker connected to benzoyl chloride analogues under mild conditions. The in vitro antibacterial activities of the synthesized derivatives against four strains of Staphylococcus aureus (MRSA ATCC 43300, ATCC 29213, AD3 and 144) were tested by the broth dilution method. Most of the synthesized derivatives displayed potent activities, and 22-(3-amino-2-(4-methyl-benzoyl)-1,2,4-triazole-5-yl)-thioacetyl)-22-deoxypleuromutilin (compound 12) was found to be the most active antibacterial derivative against MRSA (MIC = 0.125 µg/mL). Furthermore, the time-kill curves showed compound 12 had a certain inhibitory effect against MRSA in vitro. The in vivo antibacterial activity of compound 12 was further evaluated using MRSA infected murine thigh model. Compound 12 exhibited superior antibacterial efficacy than tiamulin. It was also found that compound 12 had no significant inhibitory effect on the proliferation of RAW264.7 cells. Compound 12 was further evaluated in CYP450 inhibition assay and showed moderate inhibitory effect on CYP3A4 (IC50 = 3.95 µM). Moreover, seven candidate compounds showed different affinities with the 50S ribosome by SPR measurement. Subsequently, binding of compound 12 and 20 to the 50S ribosome was further investigated by molecular modeling. Three strong hydrogen bonds were formed through the interaction of compound 12 and 20 with 50S ribosome. The binding free energy of compound 12 and 20 with the ribosome was calculated to be -10.7 kcal/mol and -11.66 kcal/mol, respectively.

Development of enzyme-free single-step immunoassays for glycocholic acid based on palladium nanoparticle-mediated signal generation.

Palladium nanoparticles (PdNPs) are composed mainly of inert noble metals, and their outstanding properties have attracted wide attention. PdNPs are not only capable of mimicking the oxidase-like characteristics of natural bio-enzymes, but they also present a clear black band in the test zone. In this work, the synthesized PdNPs promoted a transformation of colorless tetramethylbenzidine (TMB) to a blue oxidation product of TMB, providing a Km value of 0.09 mM for TMB, and revealing the good catalytic performance of the synthesized PdNPs. For both signal generation and amplification, PdNPs effectively replaced natural bio-enzymes as a new labeling tag. Thus, the PdNP-based enzyme-free single-step immunoassays were successfully developed for efficient and sensitive detection of glycocholic acid (GCA). Under optimal conditions, a noticeable linear relationship was identified by the enzyme-linked immunosorbent assay (ELISA) over a range of 8-2390 ng/mL, while the visual limit of detection (vLOD) in the constructed lateral flow immunoassay (LFA) was 10 ng/mL for GCA. The recovery rate in spiked urine samples obtained by the ELISA ranged from 84.2 to 117.9%, which was consistent with the results in LFA. The present work demonstrates the potential of PdNPs as labeling matrices in enzyme-free single-step immunoassays.

First-principles calculations on the deposition behavior of LixNay (x + y ≤ 5) clusters during the hybrid storage of Li and Na atoms on graphene.

A new strategy of sodium ion batteries with the hybrid storage of Li and Na ions has attracted much attention in the field of large-scale energy storage. For revealing the mechanism of hybrid storage of Li and Na atoms in carbon materials, the lowest energy configuration, adsorption energy, differential charge density and density of states of LixNay clusters on graphene, as a structural unit of carbon materials, were calculated and investigated based on first principles density functional theory. The calculation results show that the deposition behavior of single Li or Na atoms on graphene is similar, and both are preferentially deposited at the hollow of graphene (H-site). The Li atom is deposited preferentially over the Na atom, and the deposition height of the Li atom is lower. When the total number of metal atoms x + y ≥ 3, LixNay clusters are deposited on graphene in the form of a stereotypical atomic cluster, in which the Li atom is usually at the bottom of the LixNay cluster, while the Na atom is usually at the top of the cluster. The electronic structure analysis shows that the electrons of the LixNay cluster are transferred to the anti-bonding π orbitals adjacent to graphene. The 2s orbitals of Li atoms and the 2s and 2p orbitals of Na atoms are hybridized with the 2p orbitals of C atoms. Therefore, the Li-C bonds or Na-C bonds formed between Li or Na atoms and C atoms of graphene are usually ionic bonds with partial covalent bond properties. Meanwhile, the Li-Li, Na-Na or Li-Na bonds formed inside LixNay clusters are usually multiple metal-metal bonds.

Clinical and microbiological characteristics of Cryptococcus gattii isolated from 7 hospitals in China.

BACKGROUND: Infection, even outbreak, caused by Cryptococcus gattii (C. gattii) has been reported in Canada and the United States, but there were sparsely-reported cases of C. gattii in China. Our interest in occurrence, clinical manifestation, laboratory identification and molecular characterization of Chinese C. gattii strains leads us to this research. RESULTS: Out of 254 clinical isolates, initially identified as Cryptococcus neoformans (C. neoformans), eight strains were re-identified as C. gattii. Multi-locus sequence typing (MLST) showed genotype VGI accounted for the most (6 / 8), the other two strains were genotype VGII (VGIIa and VGIIb respectively) with 3 specific spectra of molecular weight about 4342, 8686, 9611 Da by MALDI-TOF MS. The minimal inhibitory concentrations (MICs) of Fluconazole with Yeast one was 2~4 times higher than that with ATB fungus 3 and MICs of antifungal agents against VGII strains were higher than against VGI strains. Comparative proteome analysis showed that 329 and 180 proteins were highly expressed by C. gattii VGI and VGII respectively. The enrichment of differentially expressed proteins was directed to Golgi complex. CONCLUSIONS: Infection by C. gattii in China occurred sparsely. Genotype VGI was predominant but VGII was more resistant to antifungal agents. There was significant difference in protein expression profile between isolates of VGI and VGII C. gattii.

Discovery of 2,6-difluorobenzyl ether series of phenyl ((R)-3-phenylpyrrolidin-3-yl)sulfones as surprisingly potent, selective and orally bioavailable RORγt inverse agonists.

In an effort to discover oral inverse agonists of RORγt to treat inflammatory diseases, a new 2,6-difluorobenzyl ether series of cyclopentyl sulfones were found to be surprisingly more potent than the corresponding alcohol derivatives. When combined with a more optimized phenyl ((R)-3-phenylpyrrolidin-3-yl)sulfone template, the 2,6-difluorobenzyl ethers yielded a set of very potent RORγt inverse agonists (e.g., compound 26, RORγt Gal4 EC50 11 nM) that are highly selective against PXR, LXRα and LXRß. After optimizing for stability in human and mouse liver microsomes, compounds 29 and 38 were evaluated in vivo and found to have good oral bioavailability (56% and 101%, respectively) in mice. X-ray co-crystal structure of compound 27 in RORγt revealed that the bulky benzyl ether group causes helix 11 of the protein to partially uncoil to create a new, enlarged binding site, which nicely accommodates the benzyl ether moiety, leading to net potency gain.

Discovery of (3S,4S)-3-methyl-3-(4-fluorophenyl)-4-(4-(1,1,1,3,3,3-hexafluoro-2-hydroxyprop-2-yl)phenyl)pyrrolidines as novel RORγt inverse agonists.

A novel series of cis-3,4-diphenylpyrrolidines were designed as RORγt inverse agonists based on the binding conformation of previously reported bicyclic sulfonamide 1. Preliminary synthesis and structure-activity relationship (SAR) study established (3S,4S)-3-methyl-3-(4-fluorophenyl)-4-(4-(1,1,1,3,3,3-hexafluoro-2-hydroxyprop-2-yl)phenyl)pyrrolidine as the most effective scaffold. Subsequent SAR optimization led to identification of a piperidinyl carboxamide 31, which was potent against RORγt (EC50 of 61 nM in an inverse agonist assay), selective relative to RORα, RORß, LXRα and LXRß, and stable in human and mouse liver microsomes. Furthermore, compound 31 exhibited considerably lower PXR Ymax (46%) and emerged as a promising lead. The binding mode of the diphenylpyrrolidine series was established with an X-ray co-crystal structure of 10A/RORγt.

Prevalence and characteristics of surgical site hypervirulent Klebsiella pneumoniae isolates.

BACKGROUND: We aim to determine the prevalence of hypervirulent Klebsiella pneumoniae (hvKp), which causes surgical site infections (SSIs), and describe the microbiological and molecular characteristics of hvKp isolates. METHODS: Non-duplicate K. pneumoniae strains were isolated from wound drainage specimens of postoperative patients at the Chinese PLA General Hospital between September 2008 and July 2017. Antimicrobial susceptibility, string test, pulsed-field gel electrophoresis (PFGE), and genome sequencing analyses were performed. RESULTS: Fifty-one K. pneumoniae strains were isolated from wound drainage specimens collected from postoperative patients. Twenty-six hvKp strains, including 17 (17/37, 46.0%) and 9 (9/14, 64.3%) hvKp strains, were isolated from 37 and 14 patients with SSIs and community-acquired infections (CAIs), respectively. Notably, 4 extended-spectrum beta-lactamase (ESBL)-producing hvKp strains (4/26, 15.4%) and 2 carbapenem-resistant hvKp strains (2/26, 7.7%) were found. Thirteen K1 serotype (13/26, 50.0%) and 7 K2 serotype (7/26, 26.9%) strains were identified. Phylogenetic analysis results showed that 13 K1 serotype isolates exhibited a high degree of clonality, while 7 K2 serotype strains were genetically unrelated. MLST analysis indicated that there was a strong correlation between ST23 and the K1 serotype. ST65, ST86, and ST375 were prevalent in K2 serotype strains. Almost all hvKp strains (24/26, 92.3%) harbored large virulence plasmids with a high degree of homology to pNTUH-K2044 and sizes ranging from 140 to 220 kbp. CONCLUSIONS: HvKp strains were prevalent in SSIs. Effective surveillance and control measures should be implemented to prevent the dissemination of such organisms, including the ESBL-producing and carbapenem-resistant hvKp strains.

Platinum nanoflowers with peroxidase-like property in a dual immunoassay for dehydroepiandrosterone.

Platinum nanoflowers (PtNFs) were utilized in a competitive enzyme-linked immunosorbent assay (ELISA) and in a lateral flow immunoassay (LFIA) for superior peroxidase-like activity and intense brown color, respectively. PtNFs were linked to the polyclonal antibody (pAb) to form the pAb-PtNFs probes for the dual immunoassay. Based on optimized pAb-PtNF probes, both enzyme-linked immunosorbent assay (PtNFs-ELISA) and lateral flow immunoassay (PtNFs-LFIA) perform very well. The absorbance at 450 nm decreases linearly in the DHEA concentration range 2.1 to 118.1 ng mL-1, and the limit of detection is 1.3 ng mL-1 and the IC50 value is 15.7 ng mL-1 of PtNFs-ELISA. The visual cut-off value of PtNFs-LFIA is 10.0 ng mL-1. The average recoveries from spiked samples range from 95.0 to 108.9% with a coefficient of variation below 12.2%. Excellent recoveries and correlation between the two methods were observed. Furthermore, the designed immunosensors exhibited good selectivity, confirming a broad development prospect in DHEA monitoring. Graphical Abstract.

MnO2/rGO/CNTs Framework as a Sulfur Host for High-Performance Li-S Batteries.

Lithium-sulfur batteries are very promising next-generation energy storage batteries due to their high theoretical specific capacity. However, the shuttle effect of lithium-sulfur batteries is one of the important bottlenecks that limits its rapid development. Herein, physical and chemical dual adsorption of lithium polysulfides are achieved by designing a novel framework structure consisting of MnO2, reduced graphene oxide (rGO), and carbon nanotubes (CNTs). The framework-structure composite of MnO2/rGO/CNTs is prepared by a simple hydrothermal method. The framework exhibits a uniform and abundant mesoporous structure (concentrating in ~12 nm). MnO2 is an α phase structure and the α-MnO2 also has a significant effect on the adsorption of lithium polysulfides. The rGO and CNTs provide a good physical adsorption interaction and good electronic conductivity for the dissolved polysulfides. As a result, the MnO2/rGO/CNTs/S cathode delivered a high initial capacity of 1201 mAh g-1 at 0.2 C. The average capacities were 916 mAh g-1, 736 mAh g-1, and 547 mAh g-1 at the current densities of 0.5 C, 1 C, and 2 C, respectively. In addition, when tested at 0.5 C, the MnO2/rGO/CNTs/S exhibited a high initial capacity of 1010 mAh g-1 and achieved 780 mAh g-1 after 200 cycles, with a low capacity decay rate of 0.11% per cycle. This framework-structure composite provides a simple way to improve the electrochemical performance of Li-S batteries.

Biotinylated single-chain variable fragment-based enzyme-linked immunosorbent assay for glycocholic acid.

Glycocholic acid (GCA) has been identified as a novel selective and sensitive biomarker for hepatocellular carcinoma (HCC). In this work, a recombinant antibody, scFv-G11, which was shown previously to have selective reactivity for GCA, was labeled with biotin using a chemical and an enzymatic method, respectively. The enzymatic method proved superior giving sensitive scFv-biotin preparations. Based on biotinylated scFv against GCA and a biotin-streptavidin system for signal amplification, an indirect competitive biotin-streptavidin-amplified enzyme-linked immunosorbent assay (BA-ELISA) has been established for the sensitive and rapid detection of GCA. Several physiochemical factors that influenced assay performance, such as organic cosolvent, ionic strength, and pH, were studied. Under the optimized conditions, the indirect competitive BA-ELISA based on the obtained biotinylated scFv antibodies indicated that the average concentration required for 50% inhibition of binding (IC50) and the limit of detection (LOD) for GCA were 0.42 µg mL-1 and 0.07 µg mL-1, respectively, and the linear response range extended from 0.14 to 1.24 µg mL-1. Cross-reactivity of biotinylated scFv antibodies with various bile acid analogues was below 1.89%, except for taurocholic acid. The recoveries of GCA from urine samples via this indirect competitive BA-ELISA ranged from 108.3% to 131.5%, and correlated well with liquid chromatography-electrospray tandem mass spectrometry (LC-MS/MS), which indicated the accuracy and reliability of biotinylated scFv-based ELISA in the detection of GCA in urine samples. This study also demonstrates the broad utility of scFv for the development of highly sensitive immunoassays.

Identification of bicyclic hexafluoroisopropyl alcohol sulfonamides as retinoic acid receptor-related orphan receptor gamma (RORγ/RORc) inverse agonists. Employing structure-based drug design to improve pregnane X receptor (PXR) selectivity.

We disclose the optimization of a high throughput screening hit to yield benzothiazine and tetrahydroquinoline sulfonamides as potent RORγt inverse agonists. However, a majority of these compounds showed potent activity against pregnane X receptor (PXR) and modest activity against liver X receptor α (LXRα). Structure-based drug design (SBDD) led to the identification of benzothiazine and tetrahydroquinoline sulfonamide analogs which completely dialed out LXRα activity and were less potent at PXR. Pharmacodynamic (PD) data for compound 35 in an IL-23 induced IL-17 mouse model is discussed along with the implications of a high Ymax in the PXR assay for long term preclinical pharmacokinetic (PK) studies.

Development of an Indirect Competitive Enzyme-Linked Immunosorbent Assay for Glycocholic Acid Based on Chicken Single-Chain Variable Fragment Antibodies.

Glycocholic acid (GCA) is an important metabolite of bile acids, whose urine levels are expected to be a specific diagnostic biomarker for hepatocellular carcinoma (HCC). A high-throughput immunoassay for determination of GCA would be of significant advantage and useful for primary diagnosis, surveillance, and early detection of HCC. Single-chain variable fragment (scFv) antibodies have several desirable characteristics and are an attractive alternative to traditional antibodies for the immunoassay. Because chicken antibodies possess single heavy and light variable functional domains, they are an ideal framework for simplified generation of recombinant antibodies for GCA detection. However, chicken scFvs have rarely been used to detect GCA. In this study, a scFv library was generated from chickens immunized with a GCA hapten coupled to bovine serum albumin (BSA), and anti-GCA scFvs were isolated by a phage-displayed method. Compared to the homologous coating antigen, use of a heterologous coating antigen resulted in about an 85-fold improvement in sensitivity of the immunoassay. This assay, under optimized conditions, had a linear range of 0.02-0.18 µg/mL, with an IC50 of 0.06 µg/mL. The assay showed negligible cross-reactivity with various related bile acids, except for taurocholic acid. The detection of GCA from spiked human urine samples ranged from 86.7% to 123.3%. These results, combined with the advantages of scFv antibodies, indicated that a chicken scFv-based enzyme-linked immunosorbent assay is a suitable method for high-throughput screening of GCA in human urine.

Polysulfide intercalation in bilayer-structured graphitic C3N4: a first-principles study.

Lithium-sulfur (Li-S) batteries have attracted increasing attention due to their high theoretical capacity, being a promising candidate for portable electronics, electric vehicles and large-scale energy storage. The interactions of bilayer structured graphitic C3N4 (bi-C3N4) with S8, lithium polysulfides (LiPSs), 1,3-dioxolane, 1,2-dimethoxyethane and tetrahydrofuran ether-based solvents have been studied using first-principles calculations. It has been found that the (micropore-scale) interlayer of bi-C3N4 shows intimate contact and strong binding with S8 and LiPSs due to the formation of chemical Li-N bonds. The incorporation of soluble LiPSs by the wrinkled layers of bi-C3N4 with 5.5-7.2 Å interlayer pores can suppress the shuttling effect. The interlayer ultramicropores with interlayer distances of <4 Å can accommodate the small Li2S2 and Li2S molecules, and impede the irreversible reaction between the solvents and the LiPSs. The calculated energy gap of bi-C3N4 decreases to be narrow during lithiation. Our results can provide a guideline for promoting the electrochemical performance of microporous g-C3N4/sulfur composites for Li-S batteries.

Identification and synthesis of potent and selective pyridyl-isoxazole based agonists of sphingosine-1-phosphate 1 (S1P1).

The synthesis and structure-activity relationship (SAR) of a series of pyridyl-isoxazole based agonists of S1P1 are discussed. Compound 5b provided potent in vitro activity with selectivity, had an acceptable pharmacokinetic profile, and demonstrated efficacy in a dose dependent manner when administered orally in a rodent model of arthritis.