Extraction of Bioactive Compounds for Antioxidant, Antimicrobial, and Antidiabetic Applications.

This study was designed to check the potential of secondary metabolites of the selected plants; Citrullus colocynthis, Solanum nigrum, Solanum surattense, Calotropis procera, Agave americana, and Anagallis arvensis for antioxidant, antibacterial, antifungal, and antidiabetic agents. Plant material was soaked in ethanol/methanol to get the crude extract, which was further partitioned via solvent extraction technique. GCMS and FTIR analytical techniques were applied to check the compounds responsible for causing antioxidant, antimicrobial, and antidiabetic activities. It was concluded that about 80% of studied extracts/fractions were active against α-amylase, ranging from 43 to 96%. The highest activity (96.63%) was exhibited by butanol fractions of A. arvensis while the least response (43.65%) was shown by the aqueous fraction of C. colocynthis and the methanol fraction of fruit of S. surattense. The highest antioxidant activity was shown by the ethyl acetate fraction of Anagallis arvensis (78.1%), while aqueous as well as n-hexane fractions are the least active throughout the assay. Results showed that all tested plants can be an excellent source of natural products with potential antimicrobial, antioxidant, and antidiabetic potential. The biological response of these species is depicted as a good therapeutic agent, and, in the future, it can be encapsulated for drug discovery.

Numerical entropy analysis of MHD electro-osmotic flow of peristaltic movement in a nanofluid.

The present study investigates the MHD electro-osmotic flow of entropy generation analysis for peristaltic movement in a nanofluid with temperature-dependent viscosity. Long wavelengths, i.e., The magnitude of a wave's energy corresponds directly to its frequency while being inversely related to its wavelength in terms of velocity, temperature, and concentration, govern and confine the flow stream in the laminar region. Ohmic heating and hall effects are also included. Graphs are used to obtain and examine numerical solutions for axial velocity, temperature, concentration, Bejan number, and entropy generation. The effects of this research can help to improve pumping and gastrointestinal movements in different engineering devices. Debye-Huckel and lubrication approximations are studied to access the Boltzmann distribution of electric potential across an electric double layer. The investigations of an existing model are important in illuminating the microfluidics machinery used at the micro level for various transport phenomena in which fluids as well as particles are transported together. The current study has many applications and can be further extended to a three-dimensional profile with appropriate modifications and assumptions. When studying entropy generation, it is essential to examine the irreversible factors, while also taking into account the velocity and thermal slip conditions at channel boundaries. Moreover, the concept of entropy generation holds significant importance in comprehending various biological phenomena. Hence, the current research holds promising implications for both industrial and medical fields. The entropy generation is minimum at left wall of the channel for negative values of Helmholtz-Smoluchowski velocity.

Thermal and hydraulic performance of ZnO/EG based nanofluids in mini tubes of different diameters: An experimental investigation.

The present experimental study investigates the thermal and hydraulic performance of Ethylene Glycol (EG)-based ZnO nanofluids (NFs) in circular minichannel test sections, each of 330 mm in length and 1.0-2.0 mm inner diameters. The experiments were conducted under steady-state constant heat flux and laminar flow conditions. The stable ZnO/EG-based NFs were synthesized using a standard two-step method in varying nanoparticles (NPs) loadings (0.012-0.048 wt%). The morphological characteristics, crystal structure, and specific surface area (SSA) showed that the NPs were sized in nm, possessing excellent crystal structure and enhanced surface area. Thermal conductivity (TC) and viscosity (VC) of the NFs were examined in the 20-60 °C temperature range. Both TC and VC possessed an increasing trend with the rise in concentration of the NPs. However, with the temperature rise, TC increased while the VC decreased and vice versa. The highest enhancements in TC and VC were 14.38 % and 15.22 %, respectively, at 40 °C and 0.048 wt% of NPs loading. The highest enrichment recorded in the local and average heat transfer coefficient (HTC) were 14.80 % and 13.48% in a minichannel with 1.0 mm inner diameter, respectively. It was directly proportional to the NPs loading and volume flow rate of the NFs. The friction factor was also directly proportional to the test section's inner cross-sectional area, while the pressure gradient showed an inverse behavior. An inverse relationship was recorded for the volume flow rate of the NFs and vice versa. Maximum friction factor and the pressure drop for all three minichannel test sections were recorded as 34.58 % and 32.16 %, respectively. The well-known Shah correlation predicted the local and average HTC within ±15.0 %, while the friction factor and the pressure gradient were well predicted by the Darcy correlation within the ±10.0 % range.

Nucleotide detection mechanism and comparison based on low-dimensional materials: A review.

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various nucleotide sensors and describes their limits of detection and mechanisms. To understand the far-reaching impact of this discipline, we briefly discussed conventional and nanomaterial-based sensors, and then proposed the feature prospects of these devices. Two types of sensing mechanisms were further divided into their sub-branches: polymerase chain reaction and photospectrometric-based sensors. The nanomaterial-based sensor was further subdivided into optical and electrical sensors. The optical sensors included fluorescence (FL), surface plasmon resonance (SPR), colorimetric, and surface-enhanced Raman scattering (SERS), while electrical sensors included electrochemical luminescence (ECL), microfluidic chip, and field-effect transistor (FET). A synopsis of sensing materials, mechanisms, detection limits, and ranges has been provided. The sensing mechanism and materials used were discussed for each category in terms of length, collectively forming a fusing platform to highlight the ultrahigh detection technique of nucleotide sensors. We discussed potential trends in improving the fabrication of nucleotide nanosensors based on low-dimensional materials. In this area, particular aspects, including sensitivity, detection mechanism, stability, and challenges, were addressed. The optimization of the sensing performance and selection of the best sensor were concluded. Recent trends in the atomic-scale simulation of the development of Deoxyribonucleic acid (DNA) sensors using 2D materials were highlighted. A critical overview of the challenges and opportunities of deoxyribonucleic acid sensors was explored, and progress made in deoxyribonucleic acid detection over the past decade with a family of deoxyribonucleic acid sensors was described. Areas in which further research is needed were included in the future scope.

Simulation of Gold Nanoparticle Transport during MHD Electroosmotic Flow in a Peristaltic Micro-Channel for Biomedical Treatment.

The study of gold nanoparticles (AuNPs) in the blood flow has emerged as an area of interest for numerous researchers, due to its many biomedical applications, such as cancer radiotherapy, DNA and antigens, drug and gene delivery, in vitro evaluation, optical bioimaging, radio sensitization and laser phototherapy of cancer cells and tumors. Gold nanoparticles can be amalgamated in various shapes and sizes. Due to this reason, gold nanoparticles can be diffused efficiently, target the diseased cells and destroy them. The current work studies the effect of gold nanoparticles of different shapes on the electro-magneto-hydrodynamic (EMHD) peristaltic propulsion of blood in a micro-channel under various effects, such as activation energy, bioconvection, radiation and gyrotactic microorganisms. Four kinds of nanoparticle shapes, namely bricks, cylinders and platelets, are considered. The governing equations are simplified under the approximations of low Reynolds number (LRN), long wavelength (LWL) and Debye-Hückel linearization (DHL). The numerical solutions for the non-dimensional equations are solved using the computational software MATLAB with the help of the bvp4c function. The influences of different physical parameters on the flow and thermal characteristics are computed through pictorial interpretations.

Heat Transfer Attributes of Gold-Silver-Blood Hybrid Nanomaterial Flow in an EMHD Peristaltic Channel with Activation Energy.

The heat enhancement in hybrid nanofluid flow through the peristaltic mechanism has received great attention due to its occurrence in many engineering and biomedical systems, such as flow through canals, the cavity flow model and biomedicine. Therefore, the aim of the current study was to discuss the hybrid nanofluid flow in a symmetric peristaltic channel with diverse effects, such as electromagnetohydrodynamics (EMHD), activation energy, gyrotactic microorganisms and solar radiation. The equations governing this motion were simplified under the approximations of a low Reynolds number (LRN), a long wavelength (LWL) and Debye-Hückel linearization (DHL). The numerical solutions for the non-dimensional system of equations were tackled using the computational software Mathematica. The influences of diverse physical parameters on the flow and thermal characteristics were computed through pictorial interpretations. It was concluded from the results that the thermophoresis parameter and Grashof number increased the hybrid nanofluid velocity near the right wall. The nanoparticle temperature decreased with the radiation parameter and Schmidt number. The activation energy and radiation enhanced the nanoparticle volume fraction, and motile microorganisms decreased with an increase in the Peclet number and Schmidt number. The applications of the current investigation include chyme flow in the gastrointestinal tract, the control of blood flow during surgery by altering the magnetic field and novel drug delivery systems in pharmacological engineering.

Novel Copper-Zinc-Manganese Ternary Metal Oxide Nanocomposite as Heterogeneous Catalyst for Glucose Sensor and Antibacterial Activity.

A novel copper-zinc-manganese trimetal oxide nanocomposite was synthesized by the simple co-precipitation method for sensing glucose and methylene blue degradation. The absorption maximum was found by ultraviolet-visible spectroscopy (UV-Vis) analysis, and the bandgap was 4.32 eV. The formation of a bond between metal and oxygen was confirmed by Fourier Transform Infrared Spectroscopy (FT-IR) analysis. The average crystallite size was calculated as 17.31 nm by X-ray powder diffraction (XRD) analysis. The morphology was observed as spherical by scanning electron microscope (SEM) and high-resolution transmission electron microscopy (HR-TEM) analysis. The elemental composition was determined by Energy Dispersive X-ray Analysis (EDAX) analysis. The oxidation state of the metals present in the nanocomposites was confirmed by the X-ray photoelectron spectroscopy (XPS) analysis. The hydrodynamic diameter and zeta potential of the nanocomposite were 218 nm and -46.8 eV, respectively. The thermal stability of the nanocomposite was analyzed by thermogravimetry-differential scanning calorimetry (TG-DSC) analysis. The synthesized nanocomposite was evaluated for the electrochemical glucose sensor. The nanocomposite shows 87.47% of degradation ability against methylene blue dye at a 50 µM concentration. The trimetal oxide nanocomposite shows potent activity against Escherichia coli. In addition to that, the prepared nanocomposite shows strong antioxidant application where scavenging activity was observed to be 76.58 ± 0.30, 76.89 ± 0.44, 81.41 ± 30, 82.58 ± 0.32, and 84.36 ± 0.09 % at 31, 62, 125, 250, and 500 µg/mL, respectively. The results confirm the antioxidant potency of nanoparticles (NPs) was concentration dependent.

The Recent Development in Chemoresistive-Based Heterostructure Gas Sensor Technology, Their Future Opportunities and Challenges: A Review.

Atmospheric pollution has become a critical problem for modern society; therefore, the research in this area continually aims to develop a high-performance gas sensor for health care and environmental safety. Researchers have made a significant contribution in this field by developing highly sensitive sensor-based novel selective materials. The aim of this article is to review recent developments and progress in the selective and sensitive detection of environmentally toxic gases. Different classifications of gas sensor devices are discussed based on their structure, the materials used, and their properties. The mechanisms of the sensing devices, identified by measuring the change in physical property using adsorption/desorption processes as well as chemical reactions on the gas-sensitive material surface, are also discussed. Additionally, the article presents a comprehensive review of the different morphologies and dimensions of mixed heterostructure, multilayered heterostructure, composite, core-shell, hollow heterostructure, and decorated heterostructure, which tune the gas-sensing properties towards hazardous gases. The article investigates in detail the growth and interface properties, concentrating on the material configurations that could be employed to prepare nanomaterials for commercial gas-sensing devices.

Novel Nd-N/TiO2 Nanoparticles for Photocatalytic and Antioxidant Applications Using Hydrothermal Approach.

In this study, photocatalysis was employed to degrade a wastewater pollutant (AB-29 dye) under visible light irradiation. For this purpose, nitrogen (N)- and neodymium (Nd)-doped TiO2 nanoparticles were prepared using the simple hydrothermal method. X-ray diffraction (XRD) revealed an anatase phase structure of the Nd-N/TiO2 photocatalyst, whereas properties including the surface morphology, chemical states/electronics structure and optical structure were determined using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible (UV-vis.) and photoluminescence (PL) spectroscopies. Photocatalytic testing of the prepared nanomaterials was performed to remove acid blue-29 (AB-29) dye under visible-light exposure. The prepared Nd-N/TiO2 nanoparticles demonstrated a superior photocatalytic activity and the decolorization efficiency was about 92% after visible-light illumination for 1 h and 20 min, while N/TiO2, Nd/TiO2 and TiO2 only showed a 67%, 43% and 31% decolorization efficiency, respectively. The enhanced photocatalytic activity of the Nd-N/TiO2 photocatalyst was due to a decrease in the electron/hole's recombination and the increased absorption of TiO2 in the visible range. The reusability results showed that the average photocatalytic activity decrease for all the samples was only about 16% after five consecutive cycles, indicating a good stability of the prepared nanomaterials. Moreover, the radical scavenging activity of the prepared nanomaterials was evaluated using the DPPH method. The novel Nd-N/TiO2 exhibited a higher antioxidant activity compared to all the other samples.

Recent Progress, Challenges, and Trends in Polymer-Based Sensors: A Review.

Polymers are long-chain, highly molecular weight molecules containing large numbers of repeating units within their backbone derived from the product of polymerization of monomeric units. The materials exhibit unique properties based on the types of bonds that exist within their structures. Among these, some behave as rubbers because of their excellent bending ability, lightweight nature, and shape memory. Moreover, their tunable chemical, structural, and electrical properties make them promising candidates for their use as sensing materials. Polymer-based sensors are highly utilized in the current scenario in the public health sector and environment control due to their rapid detection, small size, high sensitivity, and suitability in atmospheric conditions. Therefore, the aim of this review article is to highlight the current progress in polymer-based sensors. More importantly, this review provides general trends and challenges in sensor technology based on polymer materials.

Role of copper and alumina for heat transfer in hybrid nanofluid by using Fourier sine transform.

The convection, thermal conductivity, and heat transfer of hybrid nanofluid through nanoparticles has become integral part of several natural and industrial processes. In this manuscript, a new fractionalized model based on hybrid nanofluid is proposed and investigated by employing singular verses and non-singular kernels. The mathematical modeling of hybrid nanofluid is handled via modern fractional definitions of differentiations. The combined Laplace and Fourier Sine transforms have been configurated on the governing equations of hybrid nanofluid. The analytical expression of the governing temperature and velocity equations of hybrid nanofluid have been solved via special functions. For the sake of thermal performance, dimensional analysis of governing equations and suitable boundary conditions based on Mittage-Leffler function have been invoked for the first time in literature. The comparative analysis of heat transfer from hybrid nanofluid has been observed through Caputo-Fabrizio and Atangana-Baleanu differential operators. Finally, our results suggest that volume fraction has the decelerated and accelerated trends of temperature distribution and inclined and declined profile of heat transfer is observed copper and alumina nanoparticles.

Thermal characteristics of longitudinal fin with Fourier and non-Fourier heat transfer by Fourier sine transforms.

The quest for high-performance of heat transfer components on the basis of accommodating shapes, smaller weights, lower costs and little volume has significantly diverted the industries for the enhancement of heat dissipation with variable thermal properties of fins. This manuscript proposes the fractional modeling of Fourier and non-Fourier heat transfer of longitudinal fin via non-singular fractional approach. The configuration of longitudinal fin in terms of one dimension is developed for the mathematical model of parabolic and hyperbolic heat transfer equations. By considering the Fourier and non-Fourier heat transfer from longitudinal fin, the mathematical techniques of Fourier sine and Laplace transforms have been invoked. An analytic approach is tackled for handling the governing equation through special functions for the fractionalized parabolic and hyperbolic heat transfer equations in longitudinal fin. For the sake of comparative analysis of parabolic verses hyperbolic heat conduction of fin temperature, we depicted the distinct graphical illustrations; for instance, 2-dimensional graph, bar chart, contour graphs, heat graph, 3-dimensional graphs and column graphs on for the variants of different rheological impacts of longitudinal fin.

Study to Investigate the Potential of Combined Extract of Leaves and Seeds of Moringa oleifera in Groundwater Purification.

Several parts of the Moringa oleifera plant have revealed incredible potential for water quality improvement. However, the purification potential of a combined leaf and seed extract of Moringa oleifera plants remains unexplored. To the best of our knowledge, this research would be the first to work towards exploiting the combined potential of a leaf and seed extract of the Moringa oleifera plant in the process of water purification. In this study, we investigated the combined effectiveness of the leaf and seed extract in the purification of groundwater. The jar test method was used to analyze the effectiveness of Moringa plant extract (in combination) on different quality parameters of groundwater. Treatment with the combined plant extract (seed and leaf) resulted in significant improvement of various physicochemical (hardness, pH, turbidity, Total Dissolved Solid (TDS), and metallic impurities) and biological parameters (E.coli count) over individual seed and leaf extracts in groundwater samples. Experimental findings have strongly shown the enhanced purification efficacy of the hexane extract of combined plant materials in comparison to the individual extracts, thereby providing us with a potent natural coagulant that could combat the side effects of chemical coagulants.

Enhancement of thermoelectric performance of a nanoribbon made of [Formula: see text] lattice.

We present electronic and transport properties of a zigzag nanoribbon made of [Formula: see text] lattice. Our particular focus is on the effects of the continuous evolution of the edge modes (from flat to dispersive) on the thermoelectric transport properties. Unlike the case of graphene nanoribbon, the zigzag nanoribbon of [Formula: see text] lattice can host a pair of dispersive edge modes at the two valleys for specific width of the ribbon. Moreover, gap opening can also occur at the two valleys depending on the width. The slope of the dispersive edge modes and the energy gap strongly depend on the relative strength of two kinds of hoping parameters present in the system. We compute corresponding transport coefficients such as conductance, thermopower, thermal conductance and the thermoelectric figure of merits by using the tight-binding Green function formalism, in order to explore the roles of the dispersive edge modes. It is found that the thermopower and thermoelectric figure of merits can be enhanced significantly by suitably controlling the edge modes. The figure of merits can be enhanced by thirty times under suitable parameter regime in comparison to the case of graphene. Finally, we reveal that the presence of line defect, close to the edge, can cause a significant impact on the edge modes as well as on electrical conductance and thermopower.