The Role of Alkalis in Orchestrating Uranyl-Peroxide Reactivity Leading to Direct Air Capture of Carbon Dioxide.

Spectator ions have known and emerging roles in aqueous metal-cation chemistry, respectively directing solubility, speciation, and reactivity. Here, we isolate and structurally characterize the last two metastable members of the alkali uranyl triperoxide series, the Rb+ and Cs+ salts (Cs-U1 and Rb-U1). We document their rapid solution polymerization via small-angle X-ray scattering, which is compared to the more stable Li+, Na+ and K+ analogues. To understand the role of the alkalis, we also quantify alkali-hydroxide promoted peroxide deprotonation and decomposition, which generally exhibits increasing reactivity with increasing alkali size. Cs-U1, the most unstable of the uranyl triperoxide monomers, undergoes ambient direct air capture of CO2 in the solid-state, converting to Cs4[UVIO2(CO3)3], evidenced by single-crystal X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. We have attempted to benchmark the evolution of Cs-U1 to uranyl tricarbonate, which involves a transient, unstable hygroscopic solid that contains predominantly pentavalent uranium, quantified by X-ray photoelectron spectroscopy. Powder X-ray diffraction suggests this intermediate state contains a hydrous derivative of CsUVO3, where the parent phase has been computationally predicted, but not yet synthesized.

Boosting Photocatalytic Hydrogen Production by MOF-Derived Metal Oxide Heterojunctions with a 10.0 % Apparent Quantum Yield.

Photocatalytic hydrogen production offers an alternative pathway to establish a sustainable energy economy, utilizing the Earth's natural sunlight and water resources to address environmental concerns associated with fossil fuel combustion. While numerous photoactive materials exhibit high potential for generating hydrogen from water, the synergy achieved by combining two different materials with complementary properties in the form of heterojunctions can significantly enhance the rate of hydrogen production and quantum efficiency. Our study describes the design and generation of the metal-organic framework-derived (MOF) metal oxide heterojunction herein referred to as RTTA, composed of RuO2/N,S-TiO2. The RuO2/N,S-TiO2 is generated through the pyrolysis of MOFs, Ru-HKUST-1, and the amino-functionalized MIL-125-NH2 in the presence of thiourea. Among the various RTTA materials tested, RTTA-1, characterized by the lowest RuO2 content, exhibited the highest hydrogen evolution rate, producing 10,761 µmol ⋅ hr-1 ⋅ g-1 of hydrogen with an apparent quantum yield of 10.0 % in pure water containing glycerol. In addition to RTTA-1, we generated two other MOF-derived metal oxide heterojunctions, namely ZTTA-1 (ZnO/N,S-TiO2) and ITTA-1 (In2O3/N,S-TiO2). These heterojunctions were tested for their photocatalytic activity, leading to apparent quantum yields of 0.7 % and 0.3 %, respectively. The remarkable photocatalytic activity observed in RTTA-1 is thought to be attributed to the synergistic effects arising from the combination of metallic properties inherent in the metal oxides, complemented by the presence of suitable band alignment, porosity, and surface properties inherited from the parent MOFs. These properties enhance electron transfer and restrict hole movement. The photocatalytic efficiency of RTTA-1 was further demonstrated in actual water samples, producing hydrogen with a rate of 8,190 µmol ⋅ hr-1 ⋅ g-1 in tap water, and 6,390 µmol ⋅ hr-1 ⋅ g-1 in river water.

Hypsochromically-shifted Emission of Metal-organic Frameworks Generated through Post-synthetic Ligand Reduction.

Luminescent materials with tunable emission are becoming increasingly desirable as we move towards needing efficient Light Emitting Diodes (LEDs) for displays. Key to developing better displays is the advancement of strategies for rationally designing emissive materials that are tunable and efficient. We report a series of emissive metal-organic frameworks (MOFs) generated using BUT-10 (BUT: Beijing University of Technology) that emits green light with λmax at 525 nm. Post-synthetic reduction of the ketone on the fluorenone ligand in BUT-10 generates new materials, BUT-10-M and BUT-10-R. The emission for BUT-10-R is hypsochromically-shifted by 113 nm. Multivariate BUT-10-M structures demonstrate emission with two maxima corresponding to the emission of both fluorenol and fluorenone moieties present in their structures. Our study represents a novel post-synthetic ligand reduction strategy for producing emissive MOFs with tunable emission ranging from green, white-blue to deep blue.

An Aqueous Dual-Ion Battery Cathode of Mn3 O4 via Reversible Insertion of Nitrate.

We report reversible electrochemical insertion of NO3 - into manganese(II, III) oxide (Mn3 O4 ) as a cathode for aqueous dual-ion batteries. Characterization by TGA, FTIR, EDX, XANES, EXAFS, and EQCM collectively provides unequivocal evidence that reversible oxidative NO3 - insertion takes place inside Mn3 O4 . Ex situ HRTEM and corresponding EDX mapping results suggest that NO3 - insertion de-crystallizes the structure of Mn3 O4 . Kinetic studies reveal fast migration of NO3 - in the Mn3 O4 structure. This finding may open a new direction for novel low-cost aqueous dual-ion batteries.

Superior cathode of sodium-ion batteries: orthorhombic V2O5 nanoparticles generated in nanoporous carbon by ambient hydrolysis deposition.

For the first time, we demonstrate that orthorhombic V2O5 can exhibit superior electrochemical performance in sodium ion batteries when uniformly coated inside nanoporous carbon. The encapsulated V2O5 shows a specific capacity as high as 276 mAh/g, while the whole nanocomposite exhibits a capacity of 170 mAh/g. The V2O5/C composite was fabricated by a novel ambient hydrolysis deposition that features sequential water vapor adsorption in nanoporous carbon, followed by a hydrolysis reaction, exclusively inside the nanopores. The unique structure of the nanocomposite significantly enhances the capacity as well as the rate performance of orthorhombic V2O5 where the composite retains a capacity of over 90 mAh/g at a current rate of 640 mA/g. Furthermore, by calculating, we also revealed that a large portion of the sodium-ion storage, particularly at high current rates, is due to the V2O5 pseudocapacitance.

Pyrolysis of cellulose under ammonia leads to nitrogen-doped nanoporous carbon generated through methane formation.

Here, we present a simple one-step fabrication methodology for nitrogen-doped (N-doped) nanoporous carbon membranes via annealing cellulose filter paper under NH3. We found that nitrogen doping (up to 10.3 at %) occurs during cellulose pyrolysis under NH3 at as low as 550 °C. At 700 °C or above, N-doped carbon further reacts with NH3, resulting in a large surface area (up to 1973.3 m(2)/g). We discovered that the doped nitrogen, in fact, plays an important role in the reaction, leading to carbon gasification. CH4 was experimentally detected by mass spectrometry as a product in the reaction between N-doped carbon and NH3. When compared to conventional activated carbon (1533.6 m(2)/g), the N-doped nanoporous carbon (1326.5 m(2)/g) exhibits more than double the unit area capacitance (90 vs 41 mF/m(2)).

Bismuth-Polyoxocation Coordination Networks: Controlling Nuclearity and Dimension-Dependent Photocatalysis.

Bismuth-oxocluster nodes for metal-organic frameworks (MOFs) and coordination networks/polymers are less prolific than other families featuring zinc, zirconium, titanium, lanthanides, etc. However, Bi3+ is non-toxic, it readily forms polyoxocations, and its oxides are exploited in photocatalysis. This family of compounds provides opportunity in medicinal and energy applications. Here, we show that Bi node nuclearity depends on solvent polarity, leading to a family of Bix-sulfonate/carboxylate coordination networks with x = 1-38. Larger nuclearity-node networks were obtained from polar and strongly coordinating solvents, and we attribute the solvent's ability to stabilize larger species in solution. The strong role of the solvent and the lesser role of the linker in defining node topologies differ from other MOF syntheses, and this is due to the Bi3+ intrinsic lone pair that leads to weak node-linker interactions. We describe this family by single-crystal X-ray diffraction (eleven structures), obtained in pure forms and high yields. Ditopic linkers include NDS (1,5-naphthalenedisulfonate), DDBS (2,2'-[biphenyl-4,4'-diylchethane-2,1-diyl] dibenzenesulphonate), and NH2-benzendicarboxylate (BDC). While the BDC and NDS linkers yield more open-framework topologies that resemble those obtained by carboxylate linkers, topologies with DDBS linkers appear to be in part driven by association between DDBS molecules. An in situ small-angle X-ray scattering study of Bi38-DDBS reveals stepwise formation, including Bi38-assembly, pre-organization in solution, followed by crystallization, confirming the less important role of the linker. We demonstrate photocatalytic hydrogen (H2) generation with select members of the synthesized materials without the benefit of a co-catalyst. Band gap determination from X-ray photoelectron spectroscopy (XPS) and UV-vis data suggest the DDBS linker effectively absorbs in the visible range with ligand-to-Bi-node charge transfer. In addition, materials containing more Bi (larger Bi38-nodes or Bi6 inorganic chains) exhibit strong UV absorption, also contributing to effective photocatalysis by a different mechanism. All tested materials became black with extensive UV-vis exposure, and XPS, transmission electron microscopy, and X-ray scattering of the black Bi38-framework suggest that Bi0 is formed in situ, without phase segregation. This evolution leads to enhanced photocatalytic performance, perhaps due to increased light absorption.

Reversible Cl/Cl- redox in a spinel Mn3O4 electrode.

A unique prospect of using halides as charge carriers is the possibility of the halides undergoing anodic redox behaviors when serving as charge carriers for the charge-neutrality compensation of electrodes. However, the anodic conversion of halides to neutral halogen species has often been irreversible at room temperature due to the emergence of diatomic halogen gaseous products. Here, we report that chloride ions can be reversibly converted to near-neutral atomic chlorine species in the Mn3O4 electrode at room temperature in a highly concentrated chloride-based aqueous electrolyte. Notably, the Zn2+ cations inserted in the first discharge and trapped in the Mn3O4 structure create an environment to stabilize the converted chlorine atoms within the structure. Characterization results suggest that the Cl/Cl- redox is responsible for the observed large capacity, as the oxidation state of Mn barely changes upon charging. Computation results corroborate that the converted chlorine species exist as polychloride monoanions, e.g., [Cl3]- and [Cl5]-, inside the Zn2+-trapped Mn3O4, and the presence of polychloride species is confirmed experimentally. Our results point to the halogen plating inside electrode lattices as a new charge-storage mechanism.

An ethyl methyl sulfone co-solvent eliminates macroscopic morphological instabilities of lithium metal anode.

Lithium metal anodes suffer from a short cycle life, and the parasitic reactions of lithium with electrolytes are widely observed. Common sense is to avoid such reactions. Herein, we head in the opposite direction by using an oxidizing co-solvent, ethyl methyl sulfone, in the electrolyte, which addresses the 'dendrite' issue entirely, resulting in a dense and macroscopically smooth surface morphology of the plated lithium. However, a dendrite-free lithium metal anode does not necessarily exhibit a high coulombic efficiency.

Reversible intercalation of methyl viologen as a dicationic charge carrier in aqueous batteries.

The interactions between charge carriers and electrode structures represent one of the most important considerations in the search for new energy storage devices. Currently, ionic bonding dominates the battery chemistry. Here we report the reversible insertion of a large molecular dication, methyl viologen, into the crystal structure of an aromatic solid electrode, 3,4,9,10-perylenetetracarboxylic dianhydride. This is the largest insertion charge carrier when non-solvated ever reported for batteries; surprisingly, the kinetic properties of the (de)insertion of methyl viologen are excellent with 60% of capacity retained when the current rate is increased from 100 mA g-1 to 2000 mA g-1. Characterization reveals that the insertion of methyl viologen causes phase transformation of the organic host, and embodies guest-host chemical bonding. First-principles density functional theory calculations suggest strong guest-host interaction beyond the pure ionic bonding, where a large extent of covalency may exist. This study extends the boundary of battery chemistry to large molecular ions as charge carriers and also highlights the electrochemical assembly of a supramolecular system.

Oxide and carbide formation at titanium/organic monolayer interfaces.

X-ray photoelectron spectra (XPS) are reported from a series of buried titanium/organic monolayer interfaces accessed through sample delamination in ultrahigh vacuum (UHV). Conventional characterization of such buried interfaces requires ion-mill depth profiling, an energetic process that frequently destroys bonding information by chemically reducing the milled material. In contrast, we show that delaminating the samples at the metal/organic interface in vacuum yields sharp, nonreduced spectra that allow quantitative analysis of the buried interface chemistry. Using this UHV delamination XPS, we examine titanium vapor deposited onto a C18 cadmium stearate Langmuir-Blodgett monolayer supported on Au, SiO2, or PtO2 substrates. Titanium is widely used as an adhesion layer in organic thick film metallization as well as a top metal contact for molecular monolayer junctions, where it has been assumed to form a few-atoms-thick Ti carbide overlayer. We establish here that under many conditions the titanium instead forms a few-nanometers-thick Ti oxide overlayer. Both TiO2 and reduced TiOx species exist, with the relative proportion depending on oxygen availability. Oxygen is gettered during deposition from the ambient, from the organic film, and remarkably, from the substrate itself, producing substrate-dependent amounts of Ti oxide and Ti carbide "damage". On Au substrates, up to 20% of the molecular-monolayer carbon formed titanium carbide, SiO2 substrates approximately 15%, and PtO2 substrates <5%. Titanium oxide formation is also strongly dependent on the deposition rate and chamber pressure.

Glucose Sensing Using Functionalized Amorphous In-Ga-Zn-O Field-Effect Transistors.

Recent advances in glucose sensing have focused on the integration of sensors into contact lenses to allow noninvasive continuous glucose monitoring. Current technologies focus primarily on enzyme-based electrochemical sensing which requires multiple nontransparent electrodes to be integrated. Herein, we leverage amorphous indium gallium zinc oxide (IGZO) field-effect transistors (FETs), which have found use in a wide range of display applications and can be made fully transparent. Bottom-gated IGZO-FETs can have significant changes in electrical characteristics when the back-channel is exposed to different environments. We have functionalized the back-channel of IGZO-FETs with aminosilane groups that are cross-linked to glucose oxidase and have demonstrated that these devices have high sensitivity to changes in glucose concentrations. Glucose sensing occurs through the decrease in pH during glucose oxidation, which modulates the positive charge of the aminosilane groups attached to the IGZO surface. The change in charge affects the number of acceptor-like surface states which can deplete electron density in the n-type IGZO semiconductor. Increasing glucose concentrations leads to an increase in acceptor states and a decrease in drain-source conductance due to a positive shift in the turn-on voltage. The functionalized IGZO-FET devices are effective in minimizing detection of interfering compounds including acetaminophen and ascorbic acid. These studies suggest that IGZO FETs can be effective for monitoring glucose concentrations in a variety of environments, including those where fully transparent sensing elements may be of interest.

Direct fabrication of nanoporous graphene from graphene oxide by adding a gasification agent to a magnesiothermic reaction.

CaCO3 acts as a gasification agent during magnesiothermic reduction of graphene oxide, thus preventing the newly formed graphene from restacking. The surface area of the obtained graphene increases from 66 m(2) g(-1) to 603 m(2) g(-1) by adding CaCO3 with a high yield of ∼70% based on the carbon content in graphene oxide.

Chemical and structural investigation of high-resolution patterning with HafSO(x).

High-resolution transmission electron microscopy (TEM) imaging and energy-dispersive X-ray spectroscopy (EDS) chemical mapping have been used to examine key processing steps that enable sub-20-nm lithographic patterning of the material Hf(OH)4-2x-2y(O2)x(SO4)y·qH2O (HafSOx). Results reveal that blanket films are smooth and chemically homogeneous. Upon exposure with an electron beam, the films become insoluble in aqueous tetramethylammonium hydroxide [TMAH(aq)]. The mobility of sulfate in the exposed films, however, remains high, because it is readily exchanged with hydroxide from the TMAH(aq) solution. Annealing the films after soaking in TMAH(aq) results in the formation of a dense hafnium hydroxide oxide material that can be converted to crystalline HfO2 with a high electron-beam dose. A series of 9 nm lines is written with variable spacing to investigate the cross-sectional shape of the patterned lines and the residual material found between them.

Production of graphene by reduction using a magnesiothermic reaction.

We have, for the first time, employed a magnesiothermic reaction to convert microwave-irradiated graphite oxide to pure graphene. The magnesiothermic reaction increases the carbon to oxygen atomic ratio from 22.2 to 165.7 and maintains a high surface area. The new strategy demonstrates an efficient method for obtaining highly pure graphene materials.

An organic/Si nanowire hybrid field configurable transistor.

We report a field configurable transistor (FCT) fabricated on a Si nanowire FET platform by integrating a thin film of conjugated polymer poly[2-methoxy-5-(2'-ethylhexyloxy)-p-phenylene vinylene] (MEH-PPV) and an ionic conductive layer (RbAg4I5) into the gate. The FCT can be precisely configured to desired nonvolatile analog state dynamically, repeatedly, and reversibly by controlling the concentration of iodide ions in the MEH-PPV layer with a gate voltage. The flexible configurability and plasticity of the FCT could facilitate field-programmable circuits for defect-tolerance and synapse-like devices for learning.

In-situ infrared spectroscopy of buried organic monolayers: influence of the substrate on titanium reactivity with a Langmuir-Blodgett film.

The reactivity of metals vapor deposited onto organic monolayers has historically been correlated to the metal/terminal organic group chemistry. Here we demonstrate that the chemical composition of the substrate unexpectedly plays a significant role as well. In particular, the reactivity of evaporated titanium toward a cadmium stearate Langmuir-Blodgett (LB) film was found to depend on the substrate upon which the LB film was deposited. Infrared spectra taken in a modified ATR (Kretschmann) geometry with a thin Au substrate showed large changes in peak shape, peak position, and peak width in the C-H stretching region, indicating titanium penetration into the LB film and decomposition of the original well-packed monolayer structure. LB monolayers formed on a platinum oxide (PtO(x)) surface showed remarkably small changes after Ti deposition, indicating only a slight increase in disorder and no significant metal penetration into the film. Films on SiO2 substrates showed reactivity between that of Au and PtO(x). These differences in reactivity can be correlated primarily with the amount of available oxygen associated with each substrate, including surface oxide layers and water incorporated within the LB film.

Plasma-induced formation of Ag nanodots for ultra-high-enhancement surface-enhanced Raman scattering substrates.

We report here plasma-induced formation of Ag nanostructures for surface-enhanced Raman scattering (SERS) applications. An array of uniform Ag patterned structures of 150 nm diameter was first fabricated on a silicon substrate with imprint lithography; then the substrate was further treated with an oxygen plasma to fracture the patterned structures into clusters of smaller, interconnected, closely packed Ag nanoparticles (20-60 nm) and redeposited Ag nanodots ( approximately 10 nm) between the clusters. The substrate thus formed had a uniform ultrahigh SERS enhancement factor (1010) over the entire substrate for 4-mercaptophenol molecules. By comparison, Au patterned structures fabricated with the same method did not undergo such a morphological change after the plasma treatment and showed no enhancement of Raman scattering.