Controlling toughness of polymer-grafted nanoparticle composites for impact mitigation.

Toughness in an entangled polymer network is typically controlled by the number of load-bearing topological constraints per unit volume. In this work, we demonstrate a new paradigm for controlling toughness at high deformation rates in a polymer-grafted nanoparticle composite system where the entanglement density increases with the molecular mass of the graft. An unexpected peak in the toughness is observed right before the system reaches full entanglement that cannot be described through the entanglement concept alone. Quasi-elastic neutron scattering reveals enhanced segmental fluctuations of the grafts on the picosecond time scale, which propagate out to nanoparticle fluctuations on the time scale 100s of seconds as evidenced by X-ray photon correlation spectroscopy. This surprising multi-scale dissipation process suggests a nanoparticle jamming-unjamming transition. The realization that segmental dynamics can be coupled with the entanglement concept for enhanced toughness at high rates of deformation is a novel insight with relevance to the design of composite materials.

Using microprojectiles to study the ballistic limit of polymer thin films.

The dynamic impact between a particle and a planar material is important in many high impact events, and there is a growing need to characterize the mechanical properties of light-weight polymeric materials at dynamic loading conditions. Here, a laser-induced projectile impact test (LIPIT) is employed to investigate the ballistic limit (V0) and materials properties at impact velocities ranging from 40 m s-1 to 70 m s-1. An analytical expression describing the various energy dissipation mechanisms is established to estimate the yield stress and elasticity for polycarbonate thin films. This measurement approach demonstrates the utility of using low sample mass for discovery of materials for impact mitigation, as well as high-throughput mechanical characterization at dynamic loading rates.

The Projectile Perforation Resistance of Materials: Scaling the Impact Resistance of Thin Films to Macroscale Materials.

From drug delivery to ballistic impact, the ability to control or mitigate the puncture of a fast-moving projectile through a material is critical. While puncture is a common occurrence, which can span many orders of magnitude in the size, speed, and energy of the projectile, there remains a need to connect our understanding of the perforation resistance of materials at the nano- and microscale to the actual behavior at the macroscale that is relevant for engineering applications. In this article, we address this challenge by combining a new dimensional analysis scheme with experimental data from micro- and macroscale impact tests to develop a relationship that connects the size-scale effects and materials properties during high-speed puncture events. By relating the minimum perforation velocity to fundamental material properties and geometric test conditions, we provide new insights and establish an alternative methodology for evaluating the performance of materials that is independent of the impact energy or the specific projectile puncture experiment type. Finally, we demonstrate the utility of this approach by assessing the relevance of novel materials, such as nanocomposites and graphene for real-world impact applications.

Superresolution four-wave mixing microscopy.

We report on the development of a superresolution four-wave mixing microscope with spatial resolution approaching 130 nm which represents better than twice the diffraction limit at 800 nm while retaining the ability to acquire materials- and chemical- specific contrast. The resolution enhancement is achieved by narrowing the microscope's excitation volume in the focal plane through the combined use of a Toraldo-style pupil phase filter with the multiplicative nature of four-wave mixing.

Toward absolute viability measurements for bacteria.

We aim to develop a quantitative viability method that distinguishes individual quiescent from dead cells and is measured in time (ns) as a referenceable, comparable quantity. We demonstrate that fluorescence lifetime imaging of an anionic, fluorescent membrane voltage probe fulfills these requirements for Streptococcus mutans. A random forest machine-learning model assesses whether individual S. mutans can be correctly classified into their original populations: stationary phase (quiescent), heat killed and inactivated via chemical fixation. We compare the results to intensity using three models: lifetime variables (τ1 , τ2 and p1 ), phasor variables (G, S) or all five variables, with the five variable models having the most accurate classification. This initial work affirms the potential for using fluorescence lifetime of a membrane voltage probe as a viability marker for quiescent bacteria, and future efforts on other bacterial species and fluorophores will help refine this approach.

Fluorescently Labeled Cellulose Nanofibers for Environmental Health and Safety Studies.

An optimal methodology for locating and tracking cellulose nanofibers (CNFs) in vitro and in vivo is crucial to evaluate the environmental health and safety properties of these nanomaterials. Here, we report the use of a new boron-dipyrromethene (BODIPY) reactive fluorescent probe, meso-DichlorotriazineEthyl BODIPY (mDTEB), tailor-made for labeling CNFs used in simulated or in vivo ingestion exposure studies. Time-correlated single photon counting (TCSPC) fluorescence lifetime imaging microscopy (FLIM) was used to confirm covalent attachment and purity of mDTEB-labeled CNFs. The photoluminescence properties of mDTEB-labeled CNFs, characterized using fluorescence spectroscopy, include excellent stability over a wide pH range (pH2 to pH10) and high quantum yield, which provides detection at low (µM) concentrations. FLIM analysis also showed that lignin-like impurities present on the CNF reduce the fluorescence of the mDTEB-labeled CNF, via quenching. Therefore, the chemical composition and the methods of CNF production affect subsequent studies. An in vitro triculture, small intestinal, epithelial model was used to assess the toxicity of ingested mDTEB-labeled CNFs. Zebrafish (Danio rerio) were used to assess in vivo environmental toxicity studies. No cytotoxicity was observed for CNFs, or mDTEB-labeled CNFs, either in the triculture cells or in the zebrafish embryos.

Advantages and artifacts of higher order modes in nanoparticle-enhanced backscattering Raman imaging.

In order to facilitate nanoparticle-enhanced Raman imaging of complicated biological specimens, we have examined the use of higher order modes with radial and azimuthal polarizations focused onto a Au nanoparticle atomic force microscope (AFM) tip utilizing a backscattering reflection configuration. When comparing the Raman intensity profiles with the observed sample topography, the radial-polarized configuration demonstrates enhanced spatial resolution. This enhanced resolution results from the direction of the induced electron oscillation in the metal nanoparticle oriented by the electromagnetic field at the laser focus. The electric field component along the direction of laser propagation, attendant to the radial polarization, creates an enhanced field along the z-axis and normal to the sample. Substantial enhancement is observed utilizing an intermediate numerical aperture objective (NA = 0.7), necessary for backscattering measurements. The azimuthal polarization, similar to linear polarization, results in an enhanced field predominantly parallel to the sample, resulting in imaging artifacts. The Raman intensity profiles observed as the exciting laser polarization is switched between either a radially polarized or an azimuthally polarized state illustrate these imaging artifacts. Because azimuthal polarization arises readily from changes in the incident polarization onto the mode converter, the results presented here aid in identifying such artifacts when analyzing nanoparticle-enhanced Raman spectroscopic images. Due to the power law decay of the enhanced field, an enhancement orientation normal to the sample enables contrast between structures smaller than the tip dimensions as the apex of the nanoparticle tip, where the enhancement is strongest, passes over the sample. These effects are demonstrated using both carbon nanotube and fixed biological samples.

Tip-enhanced Raman spectroscopy and imaging: an apical illumination geometry.

Results are presented illustrating the use of tip-enhanced Raman spectroscopy (TERS) and imaging in a top-illumination geometry. A radially polarized beam is used to generate an electric field component in the direction of beam propagation, normal to the surface, resulting in a 5x increased enhancement compared to a linearly polarized beam. This multiplicative enhancement facilitates a discrimination of the near-field signal from the far-field Raman background. The top illumination configuration facilitates the application of TERS for investigating molecules on a variety of surfaces, such as Au, glass, and Si. The near-field Raman spectra of Si(100), rhodamine B, brilliant cresyl blue, and single wall carbon nanotubes are presented. Sufficient enhancement is obtained to permit a sub-diffraction-limited resolution Raman imaging of the surface distribution of large bundles of carbon nanotubes of various diameters.

Phase mask-based multimodal superresolution microscopy.

We demonstrate a multimodal superresolution microscopy technique based on a phase masked excitation beam in combination with spatially filtered detection. The theoretical foundation for calculating the focus from a non-paraxial beam with an arbitrary azimuthally symmetric phase mask is presented for linear and two-photon excitation processes as well as the theoretical resolution limitations. Experimentally this technique is demonstrated using two-photon luminescence from 80 nm gold particle as well as two-photon fluorescence lifetime imaging of fluorescent polystyrene beads. Finally to illustrate the versatility of this technique we acquire two-photon fluorescence lifetime, two-photon luminescence, and second harmonic images of a mixture of fluorescent molecules and 80 nm gold particles with > 120 nm resolution (λ/7). Since this approach exclusively relies on engineering the excitation and collection volumes, it is suitable for a wide range of scanning-based microscopies.

Rapid Wafer-Scale Growth of Polycrystalline 2H-MoS2 by Pulsed Metalorganic Chemical Vapor Deposition.

High volume manufacturing of devices based on transition metal dichalcogenide (TMD) ultra-thin films will require deposition techniques that are capable of reproducible wafer-scale growth with monolayer control. To date, TMD growth efforts have largely relied upon sublimation and transport of solid precursors with minimal control over vapor phase flux and gas-phase chemistry, which are critical for scaling up laboratory processes to manufacturing settings. To address these issues, we report a new pulsed metalorganic chemical vapor deposition (MOCVD) route for MoS2 film growth in a research-grade single-wafer reactor. Using bis(tert-butylimido)-bis(dimethylamido)molybdenum and diethyl disulfide we deposit MoS2 films from ≈ 1 nm to ≈ 25 nm in thickness on SiO2/Si substrates. We show that layered 2H-MoS2 can be produced at comparatively low reaction temperatures of 591 °C at short deposition times, approximately 90 s for few-layer films. In addition to the growth studies performed on SiO2/Si, films with wafer-level uniformity are demonstrated on 50 mm quartz wafers. Process chemistry and impurity incorporation from precursors are also discussed. This low-temperature and fast process highlights the opportunities presented by metalorganic reagents in the controlled synthesis of TMDs.

Observation of interfacial damage in a silk-epoxy composite, using a simple mechanoresponsive fluorescent probe.

Polymer composite materials are found throughout the world both natural and artificial in origin. In the vast majority of applications in these arenas, composites serve as structural support or reinforcement. Demand for lightweight tough composites is growing in multiple application spaces such as aerospace, biomaterials, and infrastructure with physical properties as diverse as the applications. The unifying component in all composites is the presence of the interphase. Many measurement techniques and measurement tools have been developed for the study of this crucial region in composite materials. Many of these methods are great for the measurement and study of bulk properties or model systems. However, development of tools that permit the direct observation of interactions at the interphase during applied stress are needed. Here we employ fluorescence lifetime imaging and hyperspectral imaging to observe activation of a fluorogenic dye at the composite interface as a result of applied stress. The advantages of this system include commercial availability of the dye precursor, and simple one-pot functionalization. The attachment of the dye at the interface is easily monitored through emission wavelength shifts or fluorescence lifetime. Interfacial mechano-responsive dyes have potential for both fundamental studies as well as industrial use as a structural health monitoring tool.

The structural phases and vibrational properties of Mo1-xWxTe2 alloys.

The structural polymorphism in transition metal dichalcogenides (TMDs) provides exciting opportunities for developing advanced electronics. For example, MoTe2 crystallizes in the 2H semiconducting phase at ambient temperature and pressure, but transitions into the 1T' semimetallic phase at high temperatures. Alloying MoTe2 with WTe2 reduces the energy barrier between these two phases, while also allowing access to the T d Weyl semimetal phase. The Mo1-x WxTe2 alloy system is therefore promising for developing phase change memory technology. However, achieving this goal necessitates a detailed understanding of the phase composition in the MoTe2-WTe2 system. We combine polarization-resolved Raman spectroscopy with x-ray diffraction (XRD) and scanning transmission electron microscopy (STEM) to study bulk Mo1-xWxTe2 alloys over the full compositional range x from 0 to 1. We identify Raman and XRD signatures characteristic of the 2H, 1T', and T d structural phases that agree with density-functional theory (DFT) calculations, and use them to identify phase fields in the MoTe2-WTe2 system, including single-phase 2H, 1T', and T d regions, as well as a two-phase 1T' + T d region. Disorder arising from compositional fluctuations in Mo1-xWxTe2 alloys breaks inversion and translational symmetry, leading to the activation of an infrared 1T'-MoTe2 mode and the enhancement of a double-resonance Raman process in 2H-Mo1-x WxTe2 alloys. Compositional fluctuations limit the phonon correlation length, which we estimate by fitting the observed asymmetric Raman lineshapes with a phonon confinement model. These observations reveal the important role of disorder in Mo1-xWxTe2 alloys, clarify the structural phase boundaries, and provide a foundation for future explorations of phase transitions and electronic phenomena in this system.

Programmable vector point-spread function engineering.

We use two nematic liquid crystal spatial light modulators (SLM's) to control the vector point spread function (VPSF) of a 1.3 numerical aperture (NA) microscope objective. This is achieved by controlling the polarization and relative phase of the electric field in the objective's pupil. We measure the resulting VPSF's for several different pupil field polarization states. By using single fluorescent molecules as local field probes, we are able to map out the focal field distributions and polarization purity of the synthesized fields. We report the achieved field purity and address the experimental issues that currently limit it.

Assessing strain mapping by electron backscatter diffraction and confocal Raman microscopy using wedge-indented Si.

The accuracy of electron backscatter diffraction (EBSD) and confocal Raman microscopy (CRM) for small-scale strain mapping are assessed using the multi-axial strain field surrounding a wedge indentation in Si as a test vehicle. The strain field is modeled using finite element analysis (FEA) that is adapted to the near-indentation surface profile measured by atomic force microscopy (AFM). The assessment consists of (1) direct experimental comparisons of strain and deformation and (2) comparisons in which the modeled strain field is used as an intermediate step. Direct experimental methods (1) consist of comparisons of surface elevation and gradient measured by AFM and EBSD and of Raman shifts measured and predicted by CRM and EBSD, respectively. Comparisons that utilize the combined FEA-AFM model (2) consist of predictions of distortion, strain, and rotation for comparison with EBSD measurements and predictions of Raman shift for comparison with CRM measurements. For both EBSD and CRM, convolution of measurements in depth-varying strain fields is considered. The interconnected comparisons suggest that EBSD was able to provide an accurate assessment of the wedge indentation deformation field to within the precision of the measurements, approximately 2×10(-4) in strain. CRM was similarly precise, but was limited in accuracy to several times this value.

Characterization of Few-Layer 1T' MoTe2 by Polarization-Resolved Second Harmonic Generation and Raman Scattering.

We study the crystal symmetry of few-layer 1T' MoTe2 using the polarization dependence of the second harmonic generation (SHG) and Raman scattering. Bulk 1T' MoTe2 is known to be inversion symmetric; however, we find that the inversion symmetry is broken for finite crystals with even numbers of layers, resulting in strong SHG comparable to other transition-metal dichalcogenides. Group theory analysis of the polarization dependence of the Raman signals allows for the definitive assignment of all the Raman modes in 1T' MoTe2 and clears up a discrepancy in the literature. The Raman results were also compared with density functional theory simulations and are in excellent agreement with the layer-dependent variations of the Raman modes. The experimental measurements also determine the relationship between the crystal axes and the polarization dependence of the SHG and Raman scattering, which now allows the anisotropy of polarized SHG or Raman signal to independently determine the crystal orientation.

Noncontact conductivity and dielectric measurement for high throughput roll-to-roll nanomanufacturing.

Advances in roll-to-roll processing of graphene and carbon nanotubes have at last led to the continuous production of high-quality coatings and filaments, ushering in a wave of applications for flexible and wearable electronics, woven fabrics, and wires. These applications often require specific electrical properties, and hence precise control over material micro- and nanostructure. While such control can be achieved, in principle, by closed-loop processing methods, there are relatively few noncontact and nondestructive options for quantifying the electrical properties of materials on a moving web at the speed required in modern nanomanufacturing. Here, we demonstrate a noncontact microwave method for measuring the dielectric constant and conductivity (or geometry for samples of known dielectric properties) of materials in a millisecond. Such measurement times are compatible with current and future industrial needs, enabling real-time materials characterization and in-line control of processing variables without disrupting production.

Near-field infrared imaging and spectroscopy of a thin film polystyrene/poly(ethyl acrylate) blend.

The application of broadband, near-field infrared microscopy to the characterization of the mesoscale structure of a thin film polymer blend is described. Key features of this instrument, which couples the nanoscale spatial resolution of scanning probe microscopy with the chemical specificity of vibrational spectroscopy, include broad tunability and bandwidth, parallel spectral detection for high image acquisition rates, and infrared-transparent aperture probes. Nearfield spectral transmission images of a thin film of polystyrene/poly(ethyl acrylate) acquired in the C-H stretching region are reported. An assessment of the relative importance of transmission image contrast mechanisms is a significant aim of this work. Analysis of the near-field infrared spectra indicates that the image contrast in the C-H stretching region is largely due to near-field coupling and/or scattering effects. Identification and differentiation of the operative contrast mechanisms on the basis of their relative dependence on wavelength is discussed. Analysis of the contrast attributed to absorption is consistent with the chemical morphology of this sample derived from previous chemical modification/atomic force microscopy studies.

Comparison of the properties of cellulose nanocrystals and cellulose nanofibrils isolated from bacteria, tunicate, and wood processed using acid, enzymatic, mechanical, and oxidative methods.

This work describes the measurement and comparison of several important properties of native cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs), such as crystallinity, morphology, aspect ratio, and surface chemistry. Measurement of the fundamental properties of seven different CNCs/CNFs, from raw material sources (bacterial, tunicate, and wood) using typical hydrolysis conditions (acid, enzymatic, mechanical, and 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-mediated oxidation), was accomplished using a variety of measurement methods. Atomic force microscopy (AFM), transmission electron microscopy (TEM), and 13C cross-polarization magic angle spinning (CPMAS) nuclear magnetic resonance (NMR) spectroscopy were used to conclude that CNCs, which are rodlike in appearance, have a higher crystallinity than CNFs, which are fibrillar in appearance. CNC aspect ratio distributions were measured and ranged from 148±147 for tunicate-CNCs to 23±12 for wood-CNCs. Hydrophobic interactions, measured using inverse gas chromatography (IGC), were found to be an important contribution to the total surface energy of both types of cellulose. In all cases, a trace amount of naturally occurring fluorescent compounds was observed after hydrolysis. Confocal and Raman microscopy were used to confirm that the fluorescent species were unique for each cellulose source, and demonstrated that such methods can be useful for monitoring purity during CNC/CNF processing. This study reveals the broad, tunable, multidimensional material space in which CNCs and CNFs exist.

Comparison of the sensitivity and image contrast in spontaneous Raman and coherent Stokes Raman scattering microscopy of geometry-controlled samples.

We experimentally compare the performance and image contrast of spontaneous Raman and coherent Stokes Raman scattering microscopy. We demonstrate the differences between these techniques on a series of geometry-controlled samples that range in complexity from a point (array of tips) to one-dimensional (line grating) and, lastly, two-dimensional (checkereboard) microstructure. Through the use of this sample series, a comparison of the focal volume, achievable signal-to-noise, and resulting image contrast is made. The results demonstrate the efficiency and spatial resolution attainable in coherent Raman microscopy relative to spontaneous Raman microscopy. Additionally, we detail potential complications in the interpretation of coherent Raman images of sample fine structure, where contrast is no longer based solely on oscillator concentration but can be influenced by sample microstructure.

Coherent stokes scattering from gold nanorods: critical dimensions and multicolor near-resonant plasmon excitation.

In this study, we detail the coherent Stokes scattering from gold nanorods in ensemble and single particle measurements. An increase of more than an order of magnitude was observed in the surface plasmon resonance enhancement of coherent Stokes scattering by gold nanorods for small changes in nanorod dimensions. The impact of this dimensional change is, in general, smaller when probed by single color linear and non-linear techniques. We find that the size sensitivity and associated wavelength dependence of the enhanced coherent Stokes scattering from individual gold nanorods is consistent with predictions based on local surface plasmon resonances found from exact solutions obtained using boundary element methods.