RESUMO
Silver thiolate nanoclusters (Ag NCs) show distinctive optical properties resulting from their hybrid nature, metallic and molecular, exhibiting size-, structure-, and surface-dependent photoluminescence, thus enabling the exploitation of Ag NCs for potential applications in nanobiotechnology, catalysis, and biomedicine. However, tailoring Ag NCs for specific applications requires achieving long-term stability and may involve modifying surface chemistry, fine-tuning ligand composition, or adding functional groups. In this study, we report the synthesis of novel Ag NCs using 2-ethanephenylthiolate (SR) as a ligand, highlight critical points addressing stability, and characterize their optical and structural properties. A preliminary electrical characterization revealed high anisotropy, well suited for potential use in electronics/sensing applications. We also present the synthesis and characterization of Ag NCs using 10-carboxylic 2-ol thiolate (SR'COOH) having a terminal carboxylic group for conjugation with amine-containing molecules. We present a preliminary assessment of its bioconjugation capability using bovine serum albumin as a model protein indicating its prospective application as a biomolecule support.
Assuntos
Prata , Prata/química , LigantesRESUMO
A study aimed at the synthesis and structure optimization of new, efficient, optically active ß-amino alcohol ligands with a structure suitable for immobilization on magnetite nanoparticles has been carried out. The optimized homogeneous amino alcohol catalysts 13a and 13b, the chirality of which arises from the Sharpless epoxidation of suitable allyl alcohols, were tested by employing the well-established enantioselective amino alcohol-promoted addition of diethylzinc to benzaldehyde, giving the corresponding benzyl alcohol with nearly quantitative yield and ee = 95%. Then, their broad applicability as chiral catalysts was evaluated by carrying out the same reaction on a family of aldehydes, including variously substituted aromatic ones as well as an aliphatic analogue. The results have confirmed the validity of the fine-tuning process performed on ligands 13a and 13b. In fact, both exhibited excellent catalytic activity as demonstrated by the chemical yields and ee obtained from all the tested aldehydes, almost independent of the position and type of substitution in the aromatic ring.
RESUMO
Silver thiolate nanoclusters have been functionalized with a chiral amino alcohol ligand that has previously shown high catalytic efficiency in different asymmetric reactions. The as-developed nanostructured catalyst, which can be easily recovered by simple centrifugation, has been tested in the addition of nitromethane to aromatic aldehydes, showing the same catalytic activity as the homogeneous ligand. Moreover, it was reused for two further recycling cycles without loss of efficiency. To the best of our knowledge, this is the first example of silver nanoclusters employed as a support for chiral ligands for heterogeneous phase asymmetric catalysis.
RESUMO
Noble metal thiolate nanoclusters are a new class of nanomaterials with molecular-like properties such as high dispersibility and fluorescence in the visible and infrared spectral region, properties highly requested in biomedicine for imaging, sensing and drug delivery applications. We report on three new silver phenylethane thiolate nanoclusters, differing for slight modifications of the preparation, i.e., the reaction solvent and the thiolate quantity, producing changes in the nanocluster composition as well as in the fluorescence behavior. All samples, excited in the range 250-500 nm, emit around 400 and 700 nm differing in the emission maxima and behavior. The silver thiolate nanoclusters have been characterized by way of C, H, S elemental analyses and Thermal Gravimetric Analysis (TGA) to determine the nanocluster composition, Scanning Transmission Electron Microscopy (STEM) to investigate the nanocluster morphology and UV-Vis and fluorescence spectroscopy to study their optical properties.
RESUMO
Fluorescent atomically precise Ag38(11-azido-2-ol-undecane-thiolate)24 nanoclusters are easily prepared using sodium ascorbate as a "green" reducer and are extensively characterized by way of elemental analyses, ATR-FTIR, XRD, SAXS, UV-vis, fluorescence spectroscopies, and theoretical modeling. The fluorescence and the atomically determined stoichiometry and structure, the facile and environmentally green synthesis, together with the novel presence of terminal azido groups in the ligands which opens the way to "click"-binding a wide set of molecular species, make Ag38(11-azido-2-ol-undecane-thiolate)24 nanoclusters uniquely appealing systems for biosensing, recognition and functionalization in biomedicine applications and in catalysis.
RESUMO
Herein, the synthesis and catalytic activity of two ephedrine-based catalysts and two ephedrine-based magnetic nanoparticle-supported catalysts are reported. All catalysts developed were tested in the addition of diethylzinc to aromatic aldehydes and in the Henry reaction. The homogeneous catalysts showed moderate catalytic activity in the organozinc addition and good activity in the Henry reaction, whereas in the case of the nanocatalyst, it was not effective in the addition of diethylzinc to aldehydes and gave reasonable results in the Henry reaction. Moreover, the nanocatalyst remained unchanged over the course of up to three catalytic cycles. To the best of our knowledge, the proposed system is the first recyclable ephedrine-based magnetic nanocatalyst employed in an enantioselective reaction.
RESUMO
One-phase, one-pot synthesis of Ag(0) nanoparticles capped with alkanethiolate molecules has been optimized to easily achieve a pure product in quantitative yield. We report the synthesis of dodecanethiolate-capped silver particles and the chemophysical, structural, and morphologic characterization performed by way of UV-vis, (1)H NMR, and X-ray photoelectron (XPS) spectroscopies, X-ray powder diffraction (XRD) and X-ray absorption fine structure analysis (XFAS), electron diffraction and high-resolution transmission electron microscopy (HR-TEM), and scanning and transmission electron microscopy (SEM and TEM). Depending on the molar ratio of the reagents (dodecylthiosulphate/Ag(+)), the mean Ag(0) particle size D(XRD) is tuned from 4 to 3 nm with a narrow size distribution. The particles are highly soluble, very stable in organic solvents (hexane, toluene, dichloromethane, etc.), and resistant to oxidation; the hexane solution after one year at room temperature does not show any precipitation or formation of oxidation byproducts.
RESUMO
A linear ß-amino alcohol ligand, previously found to be a very efficient catalyst for enantioselective addition of dialkylzinc to aromatic aldehydes, has been anchored on differently functionalized superparamagnetic core-shell magnetite-silica nanoparticles (1a and 1b). Its catalytic activity in the addition of dialkylzinc to aldehydes has been evaluated, leading to promising results, especially in the case of 1b for which the recovery by simple magnetic decantation and reuse was successfully verified.
RESUMO
With the aim to easily recover and reuse the catalyst, an efficient amino alcohol catalyst previously tested in the asymmetric addition of diethylzinc to several aromatic aldehydes has been immobilized on proper functionalized superparamagnetic core-shell magnetite-silica nanoparticles and employed in the Henry reaction in the semi-homogeneous phase. The nanocatalyst exhibits a promising catalytic activity that remains unchanged in the three catalytic cycles performed. The results prove that highly efficient catalysts, by being immobilized on suitable magnetic nanosupports, can be easily recovered and reused, maintaining their catalytic behavior.
RESUMO
We show that using the same reaction procedure, by hindering or allowing the formation of a reaction intermediate, the Ag+dodecanethiolate polymeric complex, it is possible to selectively obtain Ag dodecanethiolate nanoparticles or Ag dodecanethiolate nanoclusters in the size range 4-2 nm. Moreover, the Ag dodecanethiolate nanoclusters display a lamellar superstructure templated from the precursor Ag+dodecanethiolate polymeric complex. A plausible formation mechanism is illustrated where, starting from the precursor and scaffold lamellar Ag+ thiolate polymeric complex, first the nanocluster Agn0 core is formed by reduction of isoplanar Ag+ ions, followed by Ag+ thiolate units that build protection, the nanocluster shell, around the core. The nanoclusters are characterized by elemental analyses, XRD, ATR-FTIR, XPS, XAS, MALDI, ESI, UV-Vis and fluorescence measurements. The luminescent Ag15(dodecanethiolate)11·2H2O nanocluster is achieved in good yield after 4 hours of reaction whereas after 2 hours, the luminescent Ag35(dodecanethiolate)16 is isolated. Both Ag nanoclusters present emission bands in the range 330-450 nm, the shifting depending on the excitation wavelength. This phenomenon is attributed to a possible dipolar state causing distribution in energies due to variability of dipole-dipole interactions. Moreover, both nanoclusters further present a NIR emission at about 700 nm independent from the excitation wavelength. Thanks to their optical and structural properties, the synthesized nanoclusters, perfect molecular/nanoparticle hybrids, have great potentiality for new applications in nanotechnologies.
RESUMO
We have explored the synthesis of iron oxide particles, tubes, and fibrils within the pores of nanoporous polycarbonate and alumina membranes. The membranes contain uniformly distributed cylindrical pores with monodispersed diameters (varying between 20 and 200 nm) and thicknesses of 6 and 60 microm, respectively. By hydrolysis and polymerization of iron salts, particles of different sizes and phases were formed in the pores, building iron oxide particle nanowires. Alternatively, by the sol-gel technique, using as reagents metalloorganic compounds, fibrils and tubes of different iron oxide phases were prepared. Structural and morphological investigations performed using scanning electron microscopy and transmission electron microscopy revealed ordered iron oxide particle wires, tubes, and fibrils formed inside the membrane nanopores. Magnetic characterization was accomplished with a vibrating sample magnetometer. Below the blocking temperature (T(B)), the magnetic behavior of the nanowires was governed by dipolar interaction between nearest-neighbor nanoparticles inside the pore, whereas the energy barrier, and therefore the T(B) value, was mainly governed by dipolar interaction between magnetic moments over larger (interpore) distances. As expected, crystalline iron oxide nanotubes exhibited magnetic perpendicular anisotropy due to their magnetocrystalline and shape anisotropy.
RESUMO
Uniform, well-dispersed silver particles of various morphologies have been prepared by reducing highly acidic silver nitrate solutions with ascorbic acid in the presence of a sodium naphthalene sulfonate-formaldehyde copolymer as dispersing agent. By varying the temperature of the reaction, the free acid content, the addition rate of the reductant, and the aging time, both isometric and anisotropic silver particles could be obtained. It was found that the latter were formed by aggregation of nanosize subunits, which were identified by electron microscopy and X-ray diffractometry.
RESUMO
The development of synthetic hybrid organic-inorganic approaches and the understanding of the chemico-physical mechanisms leading to hierarchical assembly of nanocrystals into superstructures pave the way to the design and fabrication of multifunction microdevices able to simultaneously control processes at the nanoscale. This work deals with the design of spherical mesoporous magnetic assemblies through a surfactant assisted water-based strategy and the study of the formation mechanism by a combined use of transmission electron microscopy, X-ray diffraction, and time-resolved small angle X-ray scattering techniques. We visualize the hierarchical mechanism formation of the magnetic assemblies in the selected sodium dodecylsulfate (SDS)-assisted water-based strategy. At the first stage, an intermediate lamellar phase (L) represented by ß-Co(OH)2 and FeOOH hexagonal plates is formed. Then, the nucleation of primary CoFe2O4 (N1) nanocrystals of about 6-7 nm occurs by the dissolution of FeOOH and the reaction of Fe(III) ions coordinated to the SDS micelles, at the reactive sites provided by vertices and edges of the ß-Co(OH)2 plates. The intermediate phase consumes as the primary crystalline nanoparticles form, confined by the surfactant molecules around them, and assembly in spherical mesoporous assemblies. The key role of the surfactant in the formation of porous assemblies has been evidenced by an experiment carried out in the absence of SDS and confirmed by the pore size diameter of the assemblies (about 2-3 nm), that can be correlated with the length of the surfactant dodecylsulfate molecule.
RESUMO
Within the transition metal oxide systems, vanadium presents a unique chemistry due to its capacity to form a great number of mixed-valence oxo clusters which often have the peculiarity to incorporate species that function, for size, shape, and charge, as templates. Prismatic, lustrous dark brown crystals of [(n-C(4)H(9))NH(3)](9)[V(19)O(49)].7H(2)O are obtained by reacting (n-C(4)H(9)NH(3))VO(3), VOSO(4), and (n-C(4)H(9))NH(2) in H(2)O. The X-ray crystal structure shows an ellipsoidal metal-oxo cluster formed by 15 VO(5) and 3 VO(4) polyhedra surrounding an almost regular VO(4) tetrahedron located on the 3-fold axis of a trigonal cell of dimensions a = 19.113(5) Å and c = 13.743(5) Å with space group P&thremacr; and Z = 2. Exponentially weighted bond valence sum calculations, manganometric titration of the V(IV) centers, and magnetic measurements are consistent with the presence of three localized and three delocalized electrons. Variable-temperature solid-state susceptibility studies indicate antiferromagnetic coupling between V(IV) centers. Cyclic voltammetry in acetonitrile shows a irreversible reduction at -1.24 V and a reversible oxidation at +0.17 V (vs Ag/AgCl). The title compound converts quantitatively to the metal oxide K(2)V(3)O(8) with an extended layered structure as soon as a potassium salt is added to a neutral aqueous solution of the polyoxoanion.
RESUMO
Silver nanocrystals have been prepared by reacting silver nitrate with ascorbic acid in aqueous solution containing a low concentration of a commercial polynaphthalene sulfonate polymer (Daxad 19). Various crystalline morphologies have been obtained simply by tuning the reaction temperature. We have investigated the nanoparticle formation mechanism at three different temperatures by in situ and time resolved small angle X-ray scattering measurements. By modeling the scattering intensity with interacting spherical particles in a fractal-like polymer-Ag matrix, we found signatures of nucleation, growth and assembly of primary particles of about 15-20 nm. We observed how the time evolution of both spatial correlations between primary particles and the dynamic fractal geometry of the polymer-Ag matrix could influence and determine both the aggregation mechanism and the morphology of forming nanostructures in solution.
Assuntos
Nanopartículas Metálicas/química , Polímeros/química , Prata/química , Ácido Ascórbico/química , Nanopartículas Metálicas/ultraestrutura , Naftalenossulfonatos/química , Tamanho da Partícula , Temperatura , Água/químicaRESUMO
Flower-like silver nanoparticle superstructures are prepared by the reaction of silver nitrate and ascorbic acid in an acidic aqueous solution of a polynaphthalene system. The three-dimensional flower-like structure has a purely hierarchic arrangement, wherein each petal is composed of bundles of silver particle chains, each enclosed in a polymer sheath. The ordering arises from strong adsorption of silver ions onto the polymer and by the interplay of the redox properties of nitric and ascorbic acid. As a result, linear silver cyanide, formed on the polymer, probably due to intrinsic electric dipole fields, organizes the silver particle chains in dumbbell-like structures, resembling buds and flower-like structures. By dilution and heating of the mother liquors, it is also possible to obtain single petals, i.e. micrometer sized bundles of linearly aggregated silver nanoparticle chains, each enclosed in a polymer sheath.The comprehension of the hierarchic assembly of silver nanoparticles, paves the way to a facile general method to prepare polymer-metal nanoparticle chains and flower-like superstructures.The results of this study improve both the understanding of the formation mechanism of hierarchic structures at mild temperatures and our ability to tailor them to sizes and shapes appropriate for technological purposes.
Assuntos
Nanopartículas Metálicas/química , Prata/química , Nanopartículas Metálicas/ultraestrutura , Polímeros/química , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Silver particles have been prepared by reduction of silver nitrate with ascorbic acid in acidic aqueous solution containing a low concentration of a commercial polynaphthalene sulfonate polymer (Daxad 19) as dispersant agent. The reduction has been induced and controlled by the slow addition of ascorbic acid at a fixed rate; in this way, we were able to monitor the formation of a silver crystalline colloidal dispersion by in situ and time resolved Small Angle X-ray Scattering measurements. Modeling the scattering intensity with interacting spherical particles in a polymer-Ag like-fractal template allowed us to distinguish different stages involving liquid-like ordered cluster nucleation, cluster growth up to primary particle formation and particle coalescence. Between primary particle formation and particle coalescence, we observed the occurrence of a transient phase of core-shell type structures having primary particles as stable cores in expanding shells built by the organic polymer. We discuss these results in a twofold perspective pertaining both to technology, relative to controlled fabrication of metal nanoparticles and to basic chemical physics, dealing with non standard stepwise crystallization from solutions.