RESUMO
Scots pine (Pinus sylvestris L.) is one of the most widespread and economically important conifer species in the world. Applications like genomic selection and association studies, which could help accelerate breeding cycles, are challenging in Scots pine because of its large and repetitive genome. For this reason, genotyping tools for conifer species, and in particular for Scots pine, are commonly based on transcribed regions of the genome. In this article, we present the Axiom Psyl50K array, the first single nucleotide polymorphism (SNP) genotyping array for Scots pine based on whole-genome resequencing, that represents both genic and intergenic regions. This array was designed following a two-step procedure: first, 192 trees were sequenced, and a 430K SNP screening array was constructed. Then, 480 samples, including haploid megagametophytes, full-sib family trios, breeding population, and range-wide individuals from across Eurasia were genotyped with the screening array. The best 50K SNPs were selected based on quality, replicability, distribution across the draft genome assembly, balance between genic and intergenic regions, and genotype-environment and genotype-phenotype associations. Of the final 49 877 probes tiled in the array, 20 372 (40.84%) occur inside gene models, while the rest lie in intergenic regions. We also show that the Psyl50K array can yield enough high-confidence SNPs for genetic studies in pine species from North America and Eurasia. This new genotyping tool will be a valuable resource for high-throughput fundamental and applied research of Scots pine and other pine species.
Assuntos
Pinus sylvestris , Pinus , Humanos , Pinus sylvestris/genética , Polimorfismo de Nucleotídeo Único/genética , Genótipo , Melhoramento Vegetal , Pinus/genética , DNA IntergênicoRESUMO
BACKGROUND: Forest trees can occupy extensive geography and environmentally highly variable areas which result in high genetic variability in the direction of pressure from natural selection. At the same time, the majority of conifer species are wind-pollinated from both short and long distances, resulting in wide-spread gene flow, which can lead to maladaptation to local conditions. Quantitative analyses of provenance/progeny tests correct for genetic differences between populations to ensure unbiased genetic parameters are obtained. Commonly, the provenance effect is fitted as a fixed term or can be implemented as a contemporary group in the pedigree. RESULTS: The use of a provenance effect, either as a fixed term or as the same contemporary groups in both maternal and paternal sides of the pedigree, resulted in fairly similar precision of genetic parameters in our case. However, when we developed a phantom contemporary group for the paternal side of the pedigree that considered a different genetic quality of pollen compared with the maternal contribution from trees in the local environment, the model fit and accuracy of breeding values increased. CONCLUSION: Consideration of the mating dynamics and the vector of gene flow are important factors in modelling contemporary genetic groups, particularly when implementing pedigrees within a mixed model framework to obtain unbiased estimates of genetic parameters. This approach is especially important in traits involved in local adaptation.
Assuntos
Variação Genética , Traqueófitas/fisiologia , Fluxo Gênico , Genética Populacional , Genótipo , Modelos Genéticos , Melhoramento Vegetal , Polinização , Reprodução , Traqueófitas/genéticaRESUMO
Genomic selection is expected to enhance the genetic improvement of forest tree species by providing more accurate estimates of breeding values through marker-based relationship matrices compared with pedigree-based methodologies. When adequately robust genomic prediction models are available, an additional increase in genetic gains can be made possible with the shortening of the breeding cycle through elimination of the progeny testing phase and early selection of parental candidates. The potential of genomic selection was investigated in an advanced Eucalyptus nitens breeding population focused on improvement for solid wood production. A high-density SNP chip (EUChip60K) was used to genotype 691 individuals in the breeding population, which represented two seed orchards with different selection histories. Phenotypic records for growth and form traits at age six, and for wood quality traits at age seven were available to build genomic prediction models using GBLUP, which were compared to the traditional pedigree-based alternative using BLUP. GBLUP demonstrated that breeding value accuracy would be improved and substantial increases in genetic gains towards solid wood production would be achieved. Cross-validation within and across two different seed orchards indicated that genomic predictions would likely benefit in terms of higher predictive accuracy from increasing the size of the training data sets through higher relatedness and better utilization of LD.
Assuntos
Cruzamentos Genéticos , Eucalyptus/genética , Genoma de Planta , Genômica , Sementes/genética , Seleção Genética , Algoritmos , Genômica/métodos , Padrões de Herança , Modelos Genéticos , Melhoramento VegetalRESUMO
Published online: 6 July 2018This article was originally published under standard licence, but has now been made available under a [CC BY 4.0] license. The PDF and HTML versions of the paper have been modified accordingly.
RESUMO
Open-pollinated (OP) mating is frequently used in forest tree breeding due to the relative temporal and financial efficiency of the approach. The trade-off is the lower precision of the estimated genetic parameters. Pedigree/sib-ship reconstruction has been proven as a tool to correct and complete pedigree information and to improve the precision of genetic parameter estimates. Our study analyzed an advanced generation Eucalyptus population from an OP breeding program using single-step genetic evaluation. The relationship matrix inferred from sib-ship reconstruction was used to rescale the marker-based relationship matrix (G matrix). This was compared with a second scenario that used rescaling based on the documented pedigree. The proposed single-step model performed better with respect to both model fit and the theoretical accuracy of breeding values. We found that the prediction accuracy was superior when using the pedigree information only when compared with using a combination of the pedigree and genomic information. This pattern appeared to be mainly a result of accumulated unrecognized relatedness over several breeding cycles, resulting in breeding values being shrunk toward the population mean. Using biased, pedigree-based breeding values as the base with which to correlate predicted GEBVs, resulted in the underestimation of prediction accuracies. Using breeding values estimated on the basis of sib-ship reconstruction resulted in increased prediction accuracies of the genotyped individuals. Therefore, selection of the correct base for estimation of prediction accuracy is critical. The beneficial impact of sib-ship reconstruction using G matrix rescaling was profound, especially in traits with inbreeding depression, such as stem diameter.
Assuntos
Cruzamento/métodos , Eucalyptus/genética , Eucalyptus/fisiologia , Genes de Plantas , Polinização , Marcadores GenéticosRESUMO
Genomic selection study (GS) focusing on nonadditive genetic effects of dominance and the first order of epistatic effects, in a full-sib family population of 695 Scots pine (Pinus sylvestris L.) trees, was undertaken for growth and wood quality traits, using 6,344 single nucleotide polymorphism markers (SNPs) generated by genotyping-by-sequencing (GBS). Genomic marker-based relationship matrices offer more effective modeling of nonadditive genetic effects than pedigree-based models, thus increasing the knowledge on the relevance of dominance and epistatic variation in forest tree breeding. Genomic marker-based models were compared with pedigree-based models showing a considerable dominance and epistatic variation for growth traits. Nonadditive genetic variation of epistatic nature (additive × additive) was detected for growth traits, wood density (DEN), and modulus of elasticity (MOEd) representing between 2.27 and 34.5% of the total phenotypic variance. Including dominance variance in pedigree-based Best Linear Unbiased Prediction (PBLUP) and epistatic variance in genomic-based Best Linear Unbiased Prediction (GBLUP) resulted in decreased narrow-sense heritability and increased broad-sense heritability for growth traits, DEN and MOEd. Higher genetic gains were reached with early GS based on total genetic values, than with conventional pedigree selection for a selection intensity of 1%. This study indicates that nonadditive genetic variance may have a significant role in the variation of selection traits of Scots pine, thus clonal deployment could be an attractive alternative for the species. Additionally, confidence in the role of nonadditive genetic effects in this breeding program should be pursued in the future, using GS.
RESUMO
Phenotyping individual trees to quantify interactions among genotype, environment, and management practices is critical to the development of precision forestry and to maximize the opportunity of improved tree breeds. In this study we utilized airborne laser scanning (ALS) data to detect and characterize individual trees in order to generate tree-level phenotypes and tree-to-tree competition metrics. To examine our ability to account for environmental variation and its relative importance on individual-tree traits, we investigated the use of spatial models using ALS-derived competition metrics and conventional autoregressive spatial techniques. Models utilizing competition covariate terms were found to quantify previously unexplained phenotypic variation compared with standard models, substantially reducing residual variance and improving estimates of heritabilities for a set of operationally relevant traits. Models including terms for spatial autocorrelation and competition performed the best and were labelled ACE (autocorrelation-competition-error) models. The best ACE models provided statistically significant reductions in residuals ranging from -65.48% for tree height (H) to -21.03% for wood stiffness (A), and improvements in narrow sense heritabilities from 38.64% for H to 14.01% for A. Individual tree phenotyping using an ACE approach is therefore recommended for analyses of research trials where traits are susceptible to spatial effects.
RESUMO
Increasing resistance against foliar diseases is an important goal in the Pinus radiata D.Don breeding program in New Zealand, and screening for resistance has been in place for some time, since the late 1960s. The current study presents results of four progeny trials within the breeding program to investigate whether multiple disease resistance could be detected against three different needle diseases in P. radiata: Dothistroma needle blight (DNB) caused by Dothistroma septosporum, Cyclaneusma needle cast (CNC) caused by Cyclaneusma minus, and red needle cast (RNC) caused by Phytophthora pluvialis. Four progeny trials in the North Island of New Zealand were available to estimate heritabilities and between-trait genetic correlations. Two of the trials were assessed for DNB, involving 63 full-sib families. A third trial was assessed for CNC, involving 172 half-sib families, and a fourth trial was assessed for RNC, involving 170 half-sib families. Disease resistances had moderate estimates of heritability (0.28-0.48) in all trials. We investigated the potential for multiple disease resistance to the three foliar diseases by estimating genetic correlations between disease resistances using a spatial linear mixed model. The correlation between DNB and CNC resistance was favorable and strong (0.81), indicating that genotypes that are highly resistant to DNB also have a high resistance to CNC. These results suggest that selection based on resistance to DNB could allow for simultaneous indirect selection for resistance to CNC, usually only expressed at a later age. This would allow selections to be made earlier due to the earlier expression of DNB than CNC and reduce the number of expensive disease assessments being undertaken. Conversely, genetic correlation estimates for RNC with DNB and CNC were close to zero, and very imprecise. As such, later-age assessments for this disease would still be required.
RESUMO
Multivariate analysis using mixed models allows for the exploration of genetic correlations between traits. Additionally, the transition to a genomic based approach is simplified by substituting classic pedigrees with a marker-based relationship matrix. It also enables the investigation of correlated responses to selection, trait integration and modularity in different kinds of populations. This study investigated a strategy for the construction of a marker-based relationship matrix that prioritized markers using Partial Least Squares. The efficiency of this strategy was found to depend on the correlation structure between investigated traits. In terms of accuracy, we found no benefit of this strategy compared with the all-marker-based multivariate model for the primary trait of diameter at breast height (DBH) in a radiata pine (Pinus radiata) population, possibly due to the presence of strong and well-estimated correlation with other highly heritable traits. Conversely, we did see benefit in a shining gum (Eucalyptus nitens) population, where the primary trait had low or only moderate genetic correlation with other low/moderately heritable traits. Marker selection in multivariate analysis can therefore be an efficient strategy to improve prediction accuracy for low heritability traits due to improved precision in poorly estimated low/moderate genetic correlations. Additionally, our study identified the genetic diversity as a factor contributing to the efficiency of marker selection in multivariate approaches due to higher precision of genetic correlation estimates.
RESUMO
Accurate inference of relatedness between individuals in breeding population contributes to the precision of genetic parameter estimates, effectiveness of inbreeding management and the amount of genetic progress delivered from breeding programs. Pedigree reconstruction has been proven to be an efficient tool to correct pedigree errors and recover hidden relatedness in open pollinated progeny tests but the method can be limited by the lack of parental genotypes and the high proportion of alien pollen from outside the breeding population. Our study investigates the efficiency of sib-ship reconstruction in an advanced breeding population of Eucalyptus nitens with only partially tracked pedigree. The sib-ship reconstruction allowed the identification of selfs (4% of the sample) and the exploration of their potential effect on inbreeding depression in the traits studied. We detected signs of inbreeding depression in diameter at breast height and growth strain while no indications were observed in wood density, wood stiffness and tangential air-dry shrinkage. After the application of a corrected sib-ship relationship matrix, additive genetic variance and heritability were observed to increase where signs of inbreeding depression were initially detected. Conversely, the same genetic parameters for traits that appeared to be free of inbreeding depression decreased in size. It therefore appeared that greater genetic variance may be due, at least in part, to contributions from inbreeding in these studied populations rather than a removal of inbreeding as is traditionally thought.