Lagrangian Supersaturation Fluctuations at the Cloud Edge.

Evaporation of cloud droplets accelerates when turbulence mixes dry air into the cloud, affecting droplet-size distributions in atmospheric clouds, combustion sprays, and jets of exhaled droplets. The challenge is to model local correlations between droplet numbers, sizes, and supersaturation, which determine supersaturation fluctuations along droplet paths (Lagrangian fluctuations). We derived a statistical model that accounts for these correlations. Its predictions are in quantitative agreement with results of direct numerical simulations, and explain the key mechanisms at play.

Health-related quality of life during hormone therapy after breast cancer: a randomized trial.

AIM: To study the effects of menopausal hormone therapy (HT) on health-related quality of life in women after breast cancer. PATIENTS AND METHODS: In the Stockholm trial, breast cancer survivors were randomized to HT (estradiol and progestogen) or to a control group (no treatment). A subgroup of 75 women was studied (38 with HT, 37 controls). Fifty patients were on concomitant tamoxifen. Patients completed three questionnaires (EORTC QLQ C-30, EORTC QLQ-BR 23 and the Hospital Anxiety and Depression Scale (HADS)) during 1 year of treatment. RESULTS: A significant group-by-time interaction was found for improvement of insomnia in the HT group (p < 0.001). Within the HT group, but not in the control group, there was significant improvement for HADS anxiety, HADS depression, emotional, cognitive, and social functions and global quality of life. When HT was added to tamoxifen, the increase in global quality of life was significant (p < 0.01). CONCLUSION: The effects of HT on quality of life in breast cancer survivors have not previously been reported. The present data suggest that this controversial treatment may improve quality of life after breast cancer.

Attraction of the Larval Parasitoid Spintherus dubius (Hymenoptera: Pteromalidae) to Feces Volatiles from the Adult Apion Weevil Host.

The behavioral response of the larval parasitoid Spintherus dubius (Hymenoptera: Pteromalidae) to volatile compounds derived from its Apion weevil hosts was investigated in two-choice bioassays. Odor source candidates were the larval and adult stages of weevils, clover flowers, and feces from adult weevils. Despite S. dubius being a larval parasitoid, the odor of weevil larvae isolated from the clover flowers was not attractive to female parasitoids. Surprisingly, S. dubius females were instead attracted by the odor from the feces of adult weevils. The female parasitoids were similarly attracted to the feces produced by the two main hosts, the red clover weevil (A. trifolii) and the white clover weevil (A. fulvipes). Chemical analysis of the volatile composition of feces produced by the two hosts revealed qualitatively similar odor profiles, correlating with the observed attraction by the parasitoid towards both odor sources. Some of the identified volatile compounds are commonly present in clover plant headspace fractions and may function as a kairomone to facilitate orientation by S. dubius to Apion-infested clover flowers. Larval and adult weevils were not attractive for parasitoid females, whereas, for the white clover weevil-plant association, infested flowers were highly attractive. These data show the use by the clover weevil parasitoid of an alternative source of olfactory information for locating its host.

A database generator for human brain imaging.

Sharing scientific data containing complex information requires new concepts and new technology. NEUROGENERATOR is a database generator for the neuroimaging community. A database generator is a database that generates new databases. The scientists submit raw PET and fMRI data to NEUROGENERATOR, which then processes the data in a uniform way to create databases of homogeneous data suitable for data sharing, met-analysis and modelling the human brain at the systems level. These databases are then distributed to the scientists.

MEAD: an interdisciplinary study of the marine effects of atmospheric deposition in the Kattegat.

This paper summarises the results of the EU funded MEAD project, an interdisciplinary study of the effects of atmospheric nitrogen deposition on the Kattegat Sea between Denmark and Sweden. The study considers emissions of reactive nitrogen gases, their transport, transformations, deposition and effects on algal growth together with management options to reduce these effects. We conclude that atmospheric deposition is an important source of fixed nitrogen to the region particularly in summer, when nitrogen is the limiting nutrient for phytoplankton growth, and contributes to the overall eutrophication pressures in this region. However, we also conclude that it is unlikely that atmospheric deposition can, on its own, induce algal blooms in this region. A reduction of atmospheric nitrogen loads to this region will require strategies to reduce emissions of ammonia from local agriculture and Europe wide reductions in nitrous oxide emissions.

Modelling non-structural best management practices--focus on reductions in stormwater pollution.

This paper describes a modelling approach for evaluating the efficiency of different non-structural best management practices for stormwater management. A scenario with a set of source reduction practices was simulated using the substance flow model SEWSYS for an urban catchment in the city of Göteborg, Sweden. The scenario is based on a hypothetical control program that includes prevention, education and regulations. The simulation shows relatively high reductions of copper and PAH, 77% and 50%, respectively. The reduction in copper is mainly due to less copper roof corrosion and brake wear, while reduced road wear has the greatest effect for PAH. An important result from this study is that the nonstructural BMPs applied did not give a sufficient reduction in pollution to meet the desirable environmental quality criteria. To meet these criteria, additional BMPs must be implemented, preferably a combination of both non-structural and structural measures.

Modelling of different measures for improving removal in a stormwater pond.

The effect of retrofitting an existing pond on removal efficiency and hydraulic performance was modelled using the commercial software Mike21 and compartmental modelling. The Mike21 model had previously been calibrated on the studied pond. Installation of baffles, the addition of culverts under a causeway and removal of an existing island were all studied as possible improvement measures in the pond. The subsequent effect on hydraulic performance and removal of suspended solids was then evaluated. Copper, cadmium, BOD, nitrogen and phosphorus removal were also investigated for that specific improvement measure showing the best results. Outcomes of this study reveal that all measures increase the removal efficiency of suspended solids. The hydraulic efficiency is improved for all cases, except for the case where the island is removed. Compartmental modelling was also used to evaluate hydraulic performance and facilitated a better understanding of the way each of the different measures affected the flow pattern and performance. It was concluded that the installation of baffles is the best of the studied measures resulting in a reduction in the annual load on the receiving lake by approximately 8,000 kg of suspended solids (25% reduction of the annual load), 2 kg of copper (10% reduction of the annual load) and 600 kg of BOD (10% reduction of the annual load).

Quality assurance in radiation therapy: physics efforts.

During the last two years, several important documents on quality assurance in radiation therapy have been published. In 1981 the Committee on Radiation Oncology Studies, in a report to the Director of the National Cancer Institute, outlined criteria for multidisciplinary cancer management, including technical standards in radiation therapy. In March 1983, a task group of the American Association of Physicists in Medicine (AAPM) submitted a document for review and publication on "The Physical Aspects of Quality Assurance in Radiation Therapy". This document addresses quality assurance problems related to: 1. treatment machines; 2. measurement equipment; 3. treatment planning; 4. treatment verification; 5. brachytherapy; and 6. radiation safety. One chapter in this latter document discusses the problem of estimating the uncertainty in dose delivered to a patient. The contributions to this uncertainty are analyzed and separated into dosimetric and spatial uncertainties. The dosimetric uncertainties resulting from the central axis calibration and treatment planning amount to about 5% at the 95% confidence level in an optimal situation. The spatial uncertainties resulting from machine alignment problems combined with patient set-up and organ motion may be about 8 mm to 10 mm, corresponding to two standard deviations. An example of how the spatial uncertainty translates into a dose uncertainty for a three-field esophageal plan is discussed.

An external beam treatment technique for retinoblastoma.

The main difficulty in the irradiation of retinoblastoma has been to deliver a high uniform dose to the entire retinal surface and spare the lens. Conventional techniques are inadequate to deliver an acceptable dose distribution especially for cases when there are both anterior and posterior lesions. We have developed a procedure to deliver a high dose anteriorly at the ora serrata for a compromise of about 30-35% of the target dose to the lens. The technique consists of 3 pairs of non-coplanar arcs using a 4 MV accelerator. This technique may offer a higher probability of tumor control and cure when gross tumor is present at the ora serrata when compared to the conventional techniques using lateral techniques.

Mantle irradiation in the upright position: a technique to reduce the volume of lung irradiated in patients with bulky mediastinal Hodgkin's disease.

Many patients with mediastinal Hodgkin's disease radiographically show a wider horizontal width of disease in the supine or prone as compared to the upright position. Yet for most patients mantle treatment in the supine/prone position is still preferable. This position allows good patient immobilization and precise matching between the mantle and paraaortic-splenic pedicle fields that would not be possible in the sitting or upright position. Adequate blocking of the lungs and heart remains possible in the supine position since most patients do not have extensive subcarinal Hodgkin's disease. Even when more extensive disease is present, contoured blocks to protect the heart and lungs can be adjusted to protect a greater portion of normal tissues if the mediastinal nodes respond to treatment. But if sizeable mediastinal disease persists, it may be impossible to protect sufficient heart and lung. Under these circumstances, repositioning the patient upright can shift the configuration of the mass, allowing larger lung blocks to be added. We report the use of a chair to facilitate treatment with mantle irradiation in the upright position for patients whose mediastinal disease when supine is too large to allow adequate blocking of heart and lung. Blocks are made from the initial port films and daily treatment films are taken to confirm an accurate set-up. To avoid excessive dose to the spinal cord, patients who are to receive para-aortic irradiation receive a maximum of 15-20 Gy in the upright position and the remainder of the mantle is given in the supine-prone position. The use of the upright technique allows for the use of radiation in patients who would otherwise be unable to receive adequate doses due to potential lung and cardiac toxicity.

Optimization of radiation therapy: integral-response of a model biological system.

Several radiotherapy treatment planning criteria have been proposed for dose distribution optimization. Here we present a simple mathematical model of an idealized biological system. From it we have derived an objective function designed to achieve an extremum for that particular plan which minimizes the probabilities of occurrence of unacceptable complications in healthy tissue and of recurrence or spread of disease. The model assumes that an organism is separable into physiologically discrete compartments or organs, each consisting of a set of microscopic functional units with their own dose-response characteristics. In analogy to the integral-dose, we define an integral-response parameter v as a measure of radiation-induced damage; the value of this v may be calculated for any given spatial distribution of dose in a compartment or organ. A Probability of Serious Complications function, PSC(v), then provides an estimate of the likelihood of occurrence of unacceptable complications. Special problems arising with paired organs (kidneys), "series" organs (spinal cord), and the recurrence and spread of disease are addressed. The PSC for the various organs and neoplasia can be combined to form a compound Complication Factor (CF) objective function; the lower the value of the CF, the better the overall plan. Prospects for making the model explicitly time/fractionation dependent, and for incorporating utility theoretic ideas, are discussed.

Progress in 3-D treatment planning for photon beam therapy.

The purpose of this report is to study the feasibility of improving dose distributions using non-coplanar photon beams from a linear accelerator. Non-coplanar beams may enter the patient in any arbitrary configuration. This type of treatment technique requires a three-dimensional (3-D) planning system. Clinical examples are used to illustrate the general problems in 3-D treatment planning, and the potential improvement over coplanar beam treatments. Features of a treatment planning system for 3-D planning are discussed.

A beam alignment device for matching fields.

When radiation treatment is delivered to adjacent or contiguous tumor volumes with multiple fields, the geometric alignment of the beams is particularly critical. A beam alignment device has been developed that enables precise matching of such fields.

The Harvard Joint Center for Radiation Therapy, 1968-1999: a unique concept and its relationship to the prevailing times in academic medicine.

PURPOSE: Institutional structure, function, and philosophy reflect the organizational needs, and tend to mirror societal values of the times. For many years, the field of radiation oncology had among its major academic centers, an organization that served as a model for collaboration among health care institutions in an effort to serve the common good of its patients, hospitals, professional colleagues, and community. For over three decades, the Joint Center for Radiation Therapy (JCRT) was a leader in developing new organizational approaches for academic and clinical radiation oncology through the philosophy of collaboration in patient care, education, and research. METHODS AND RESULTS: In tracing the development and changes in organizational philosophy and structure of the JCRT, one can see the impact on academic oncology and cancer care through the emergence of both radiation and medical oncology as independent subspecialties, the importance of the National Cancer Act of 1971 accompanied by the growth of the NIH research and training programs and, more recently, the effect of the changing attitudes and approaches of hospitals, academicians, practitioners, and policy makers to health care delivery, structures, and cooperation. CONCLUSION: Lessons learned from the 31-year history of the JCRT may help provide organizational insight useful in guiding academic oncology and academic medical centers through periods of change.

Effect of set-up error on the dose across the junction of matching cranial-spinal fields in the treatment of medulloblastoma.

PURPOSE: The effect of systematic and stochastic setup error on the dose delivered to the gap region for the three field radiation treatment of medulloblastoma is studied. The consequences of such setup error is discussed. METHODS AND MATERIALS: The treatment of medulloblastoma is typically a 3 field technique, in which two lateral cranial fields are matched with a spine field. The x-ray dose delivered to the region between the matched fields depends upon the gap size. The choice of the gap width between the cranial and spinal fields is controversial. It is currently a compromise between minimizing the risk of dose hot spots to the spine, and the associated clinical complications, as well as the magnitude of cold spots (underdosing) across the gap, with the associated risk of disease recurrence. In this paper, we examine the effect of gap width with a moving junction, referred to as "field feathering", on the dose across the field junction for a 6MV photon beam. In addition, we have studied 129 portal films and 40 simulation films to assess the accuracy and precision of patient setup during treatment with a plan involving feathered fields. Selected landmarks observable on both portal and simulation films were identified and the variation in the distances to the field edges measured. The distribution of patient setup error was convoluted with the beam profiles for a 6MV linac. These convoluted field edges were used obtain dose profiles across the gap region as a function of gap separation. The consequences for therapy are discussed. In addition, analysis of patient setup error on an alternative treatment involving beam modifiers to broaden the beam penumbra is discussed. RESULTS: The magnitude of the spatial stochastic and systematic setup error was determined to be approximately three and two millimeters respectively. The dosimetric consequences of patient setup error lead to over and under dosing in the spinal gap region for the three field technique. The degree of under or over dose depends on the nature and magnitude of the patient setup error. CONCLUSIONS: The effect of patient setup error can lead to significant dosimetric errors in the dose to the gap region depending on the magnitude of the setup errors. The effective over and under dose can be compensated by the use beams modifiers such as a beam spoiler or vibrating jaws.

Dynamic field shaping for stereotactic radiosurgery: a modeling study.

PURPOSE: This work assesses the relative field shaping advantages of dynamic field shaping devices for stereotactic radiosurgery using a linear accelerator. METHODS AND MATERIALS: We selected 43 intracranial tumors (2.0-4.2 cm maximum dimension, 1.5-25.5 cc tumor volume) out of the first 64 intracranial tumors treated with radiosurgery at the Joint Center for Radiation Therapy. We modeled five field shaping devices, each including a fixed auxiliary circular collimator: (a) fixed circular collimator alone; (b) two independent parallel jaws; (c) four independent rectangular jaws; (d) four independent rotatable jaws; and (e) "ideal" multileaf collimator. We adjusted the model parameters until the minimum target isodose was 80% of the dose delivered to isocenter. We defined the treatment volume ratio as the target volume divided by the treatment volume (volume receiving at least the minimum target dose). We used the treatment volume ratio to compare the five models and the actual patient treatments. RESULTS: For 34 tumors originally treated with one isocenter, the median Treatment Volume Ratio was higher for all of the device models except the fixed circular collimator compared to the actual patient treatments. For the nine tumors originally treated with multiple isocenters, the median Treatment Volume Ratio for the actual multiple isocenter treatments was similar to that for two parallel jaws, four rectangular jaws and four rotatable jaws. Only the median "ideal" collimator treatment volume ratio was higher for these nine tumors. CONCLUSION: Simple field shaping devices have approximately 50% of the conformal advantage of an "ideal" multileaf collimator. Approximately 50% of typical radiosurgical tumors between 2 and 4 cm have field shaping advantages which exceed the geometrical uncertainties inherent in linear accelerator radiosurgery treatments. The three models, two parallel, four rectangular, or four rotatable independent jaws would improve current linear accelerator technology by providing homogeneous doses with equivalent field shaping for most tumors originally treated with inhomogeneous multiple isocenter plans (6/9 tumors in the current series).

Ultrasound image fusion for external beam radiotherapy for prostate cancer.

PURPOSE: To determine whether real-time ultrasound imaging and targeting system for the treatment of prostate cancer was feasible. The initial phase of this project included a study to develop and determine (a) software for the fusion of ultrasound images to standard x-rays obtained during simulation, and (b) the potential reduction in field size with real-time imaging. METHODS AND MATERIALS: During 13 patient simulations a transrectal ultrasound image was obtained. Orthogonal x-ray films were acquired with the rectal probe in place. Both the x-ray and ultrasound images were digitized and a fusion image was created of the prostate position in relation to the probe, bladder, and rectum. The two-dimensional area of the rectum, bladder, and prostate was determined in the lateral projection. Potential conformal blocks were designed for the lateral portals in a four-field treatment technique. RESULTS: The transrectal ultrasound probe enabled real-time prostate imaging. The lateral field size can be reduced to 6.08 x 5.68 cm2 +/- 0.62 x 0.48 cm2 from the standard 8 x 8 cm2 field. The posterior rectal wall was physically displaced out of the lateral field. The area of the rectum included in the lateral field is 1.75 cm2 +/- 0.85 cm2. CONCLUSION: The prostate position can be determined with certainty on a regular basis with transrectal ultrasonography. The amount of normal tissue in the high dose volume can be reduced. This approach may reduce acute and chronic morbidity and allow further dose escalation.

Measurements of dose from secondary radiation outside a treatment field.

Radiation dose to organs outside the radiotherapy treatment field can be significant and therefore is of clinical interest. We have made measurements of dose at distances up to 70 cm from the central axes of 5 X 5, 15 X 15 and 25 X 25 cm radiation fields of 300 kVp, 4 MV and 8 MV X rays, and 60Co gamma rays, at the surface and at depths in water of 5 and 10 cm. Contributions to the total secondary radiation dose from water scatter, machine (collimator) scatter and leakage radiation have been separated. We have found that the component of dose from water scatter can be described by a simple exponential function of distance from the central axis of the radiation field for all energies and field sizes. Machine scatter contributes 20 to 40% of the total secondary dose depending on machine, field size and distance from the field. Leakage radiation contributes very little dose, but becomes the dominant component at distances beyond 60 cm from the central axis. Estimates of the risk of second tumors in long term survivors indicate a small incremental increase above the natural incidence rate based on information from the 1980 BEIR Committee report.

Three-field technique for breast irradiation using tangential field corner blocks.

A further modification of the three-field technique for the radiotherapy of the breast has been developed. Two isocentric opposing tangential fields encompass the breast, chest wall, and may include the internal mammary lymph nodes. The third, an anterior field, encompasses the axilla and supraclavicular areas. As with our previously reported techniques, the objectives of the present modification is to make the posterior edges of the tangential fields coplanar and to match the cephalad geometric edges of the tangential fields to the caudad geometric edge of the supraclavicular field. A half-beam block is used to shield the caudad half of the anterior field, thus producing a vertical transverse plane to which the tangential fields are matched. Small corner blocks are used on the cephalad edges of the tangential fields to produce the vertical edge necessary for matching to the anterior field. It is essential that the match between the tangential fields and the anterior field be geometrically correct to ensure both local control of disease and good cosmetic results. Two advantages of the present technique are the ease with which it can be carried out and the precision of the match plane without the use of cumbersome mechanical accessories.

Dose optimization with computer-controlled gantry rotation, collimator motion and dose-rate variation.

The applications of a computer-controlled radiation therapy system to optimize dose distributions in two dimensions are explored. This study is limited to a target volume with constant cross-section along an axis parallel to the long axis of the patient. The machine components that are continuously varied during treatment are the dose rate, the gantry angle, and the four independent collimator jaws, two of which can cross the beam centerline. Basic control strategies, treatment planning and delivery techniques are illustrated with clinical examples. We conclude that the computer-controlled radiation therapy system can easily and reliably deliver dose distributions which are significantly better than those produced by conventional multiple-field techniques.