Prioritization, Identification, and Quantification of Emerging Contaminants in Recycled Textiles Using Non-Targeted and Suspect Screening Workflows by LC-ESI-HRMS.

Recycled textiles are becoming widely available to consumers as manufacturers adopt circular economy principles to reduce the negative impact of garment production. Still, the quality of the source material directly impacts the final product, where the presence of harmful chemicals is of utmost concern. Here, we develop a risk-based suspect and non-targeted screening workflow for the detection, identification, and prioritization of the chemicals present in consumer-based recycled textile products after manufacture and transport. We apply the workflow to characterize 13 recycled textile products from major retail outlets in Sweden. Samples were extracted and analyzed by liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS). In positive and negative ionization mode, 20,119 LC-HRMS features were detected and screened against persistent, mobile, and toxic (PMT) as well as other textile-related chemicals. Six substances were matched with PMT substances that are regulated in the European Union (EU) with a Level 2/3 confidence. Forty-three substances were confidently matched with textile-related chemicals reported for use in Sweden. For estimating the relative priority score, aquatic toxicity and concentrations were predicted for 7416 features with tandem mass spectra (MS2) and used to rank the non-targeted features. The top 10 substances were evaluated due to elevated environmental risk linked to the recycling process and potential release at end-of-life.

Online and Offline Prioritization of Chemicals of Interest in Suspect Screening and Non-targeted Screening with High-Resolution Mass Spectrometry.

Recent advances in high-resolution mass spectrometry (HRMS) have enabled the detection of thousands of chemicals from a single sample, while computational methods have improved the identification and quantification of these chemicals in the absence of reference standards typically required in targeted analysis. However, to determine the presence of chemicals of interest that may pose an overall impact on ecological and human health, prioritization strategies must be used to effectively and efficiently highlight chemicals for further investigation. Prioritization can be based on a chemical's physicochemical properties, structure, exposure, and toxicity, in addition to its regulatory status. This Perspective aims to provide a framework for the strategies used for chemical prioritization that can be implemented to facilitate high-quality research and communication of results. These strategies are categorized as either "online" or "offline" prioritization techniques. Online prioritization techniques trigger the isolation and fragmentation of ions from the low-energy mass spectra in real time, with user-defined parameters. Offline prioritization techniques, in contrast, highlight chemicals of interest after the data has been acquired; detected features can be filtered and ranked based on the relative abundance or the predicted structure, toxicity, and concentration imputed from the tandem mass spectrum (MS2). Here we provide an overview of these prioritization techniques and how they have been successfully implemented and reported in the literature to find chemicals of elevated risk to human and ecological environments. A complete list of software and tools is available from https://nontargetedanalysis.org/.

Comparison of high-resolution mass spectrometry acquisition methods for the simultaneous quantification and identification of per- and polyfluoroalkyl substances (PFAS).

Simultaneous identification and quantification of per- and polyfluoroalkyl substances (PFAS) were evaluated for three quadrupole time-of-flight mass spectrometry (QTOF) acquisition methods. The acquisition methods investigated were MS-Only, all ion fragmentation (All-Ions), and automated tandem mass spectrometry (Auto-MS/MS). Target analytes were the 25 PFAS of US EPA Method 533 and the acquisition methods were evaluated by analyte response, limit of quantification (LOQ), accuracy, precision, and target-suspect screening identification limit (IL). PFAS LOQs were consistent across acquisition methods, with individual PFAS LOQs within an order of magnitude. The mean and range for MS-Only, All-Ions, and Auto-MS/MS are 1.3 (0.34-5.1), 2.1 (0.49-5.1), and 1.5 (0.20-5.1) pg on column. For fast data processing and tentative identification with lower confidence, MS-Only is recommended; however, this can lead to false-positives. Where high-confidence identification, structural characterisation, and quantification are desired, Auto-MS/MS is recommended; however, cycle time should be considered where many compounds are anticipated to be present. For comprehensive screening workflows and sample archiving, All-Ions is recommended, facilitating both quantification and retrospective analysis. This study validated HRMS acquisition approaches for quantification (based upon precursor data) and exploration of identification workflows for a range of PFAS compounds.

Field-Based Distribution and Bioaccumulation Factors for Cyclic and Aliphatic Per- and Polyfluoroalkyl Substances (PFASs) in an Urban Sedentary Waterbird Population.

The field-based distribution and bioaccumulation factor (BAF) for per- and polyfluoroalkyl substances (PFASs) were determined in residential Black Swans (Cygnus atratus) from an urban lake (Melbourne, Australia). The concentrations of 46 aliphatic and cyclic PFASs were determined by HPLC-MS/MS in serum and excrement from swans, and water, sediment, aquatic macrophytes, soil, and grass samples in and around the lake. Elevated concentrations of ∑46PFASs were detected in serum (120 ng mL-1) and excrement (110 ng g-1 dw) were strongly related indicating a potential noninvasive sampling methodology. Environmental concentrations of PFASs were consistent with a highly impacted ecosystem and notably high concentrations of perfluoro-4-ethylcyclohexanesulfonate (PFECHS, 67584-42-3; C8HF15SO3) were detected in water (27 ng L-1) and swan serum (16 ng mL-1). In the absence of credible putative alternative sources of PFECHS input to the lake, we propose that the use of high-performance motorsport vehicles is a likely source of contamination to this ecosystem. The BAF of perfluorocarboxylic acids increased with each additional CF2 moiety from PFOA (15.7 L kg-1 ww) to PFDoDA (3615 L kg-1 ww). The BAF of PFECHS was estimated as 593 L kg-1 ww, which is lower compared with that of PFOS (1097 L kg-1 ww).

Evaluation and validation of methodologies for the extraction of per- and polyfluoroalkyl substances (PFASs) in serum of birds and mammals.

Advances in analytical techniques have allowed greater detection of environmental contaminants from small volumes of sample. Four methodologies were evaluated for the extraction of 53 per- and polyfluoroalkyl substances (PFASs) from eight classes in 200 µL of avian and mammal serum. Spiked serums at four concentrations (0, 0.5, 5.0 and 25 ng mL-1) were prepared by protein precipitation (PPT), enhanced matrix removal (EMR), weak anion exchange (WAX), and hydrophilic-lipophilic balance (HLB) solid-phase extraction cartridges. The extract from each methodology was analysed by high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS), and concentrations were compared with known concentrations in the spiked media. EMR performed the best overall, with 40 of 53 compounds effectively recovered at 5 ng mL-1. Furthermore, EMR was effective overall at concentrations ranging from 0.5 to 25 ng mL-1 for 39 out of 53. Similarly, PPT was effective for 35 of 53 compounds at all spiked serum concentrations. There was a negative correlation between internal standard recovery for compounds with increasing octanol-water coefficients (Kow) for WAX (R = - 0.65, p = 0.0043) and HLB (R = - 0.62, p = 0.0077) extractions, indicating methanol may not be a suitable solvent for long-chain PFAS extraction from protein-rich tissues. EMR and PPT represent fast and effective methodologies for the extraction of PFASs from low volumes of serum which allows greater accuracy and precision that can be applied to future human and wildlife biomonitoring programmes.

Validating blood microsampling for per- and polyfluoroalkyl substances quantification in whole blood.

Microsampling allows the collection of blood samples using a method which is inexpensive, simple and minimally-invasive, without the need for specially-trained medical staff. Analysis of whole blood provides a more holistic understanding of per- and polyfluoroalkyl substances (PFAS) body burden. Capillary action microsamplers (Trajan hemaPEN®) allow the controlled collection of whole blood as dried blood spots (DBS) (four 2.74 µL ± 5 %). The quantification of 75 PFAS from DBS was evaluated by comparing five common extraction techniques. Spiked blood (5 ng/mL PFAS) was extracted by protein precipitation (centrifuged; filtered), acid-base liquid-liquid extraction, trypsin protease digestion, and weak anion exchange (WAX) solid-phase extraction with analysis by high-performance liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Filtered protein precipitation was the most effective extraction method, recovering 72 of the 75 PFAS within 70 to 130 % with method reporting limit (MRL) for PFOS of 0.17 ng/L and ranging between 0.05 ng/mL and 0.34 ng/mL for all other PFAS. The optimised method was applied to human blood samples to examine Inter- (n = 7) and intra-day (n = 5) PFAS blood levels in one individual. Sixteen PFAS were detected with an overall Σ16PFAS mean = 6.3 (range = 5.7-7.0) ng/mL and perfluorooctane sulfonate (branched and linear isomers, ΣPFOS) = 3.3 (2.8-3.7) ng/mL being the dominant PFAS present. To the authors knowledge, this minimally invasive self-sampling protocol is the most extensive method for PFAS in blood reported and could be a useful tool for large scale human biomonitoring studies.

Evaluating the reliability of environmental concentration data to characterize exposure in environmental risk assessments.

Environmental risk assessments often rely on measured concentrations in environmental matrices to characterize exposure of the population of interest-typically, humans, aquatic biota, or other wildlife. Yet, there is limited guidance available on how to report and evaluate exposure datasets for reliability and relevance, despite their importance to regulatory decision-making. This paper is the second of a four-paper series detailing the outcomes of a Society of Environmental Toxicology and Chemistry Technical Workshop that has developed Criteria for Reporting and Evaluating Exposure Datasets (CREED). It presents specific criteria to systematically evaluate the reliability of environmental exposure datasets. These criteria can help risk assessors understand and characterize uncertainties when existing data are used in various types of assessments and can serve as guidance on best practice for the reporting of data for data generators (to maximize utility of their datasets). Although most reliability criteria are universal, some practices may need to be evaluated considering the purpose of the assessment. Reliability refers to the inherent quality of the dataset and evaluation criteria address the identification of analytes, study sites, environmental matrices, sampling dates, sample collection methods, analytical method performance, data handling or aggregation, treatment of censored data, and generation of summary statistics. Each criterion is evaluated as "fully met," "partly met," "not met or inappropriate," "not reported," or "not applicable" for the dataset being reviewed. The evaluation concludes with a scheme for scoring the dataset as reliable with or without restrictions, not reliable, or not assignable, and is demonstrated with three case studies representing both organic and inorganic constituents, and different study designs and assessment purposes. Reliability evaluation can be used in conjunction with relevance evaluation (assessed separately) to determine the extent to which environmental monitoring datasets are "fit for purpose," that is, suitable for use in various types of assessments. Integr Environ Assess Manag 2024;20:981-1003. © 2024 Society of Environmental Toxicology & Chemistry (SETAC). This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.

High-resolution temporal wastewater treatment plant investigation to understand influent mass flux of per- and polyfluoroalkyl substances (PFAS).

This study aims to identify sources of per- and polyfluoroalkyl substances (PFAS) to wastewater treatment plants (WWTPs) and reveals previously undescribed variability in daily PFAS concentrations by measuring their occurrence in WWTP influent each hour over the course of a week. ∑50PFAS concentrations ranged between 89 ± 38 on Monday and 173 ± 110 ng L-1 on Friday, where perfluoroalkyl carboxylic acids (PFCAs), disubstituted phosphate esters (diPAPs), and perfluoroalkyl sulfonic acids (PFSAs) contributed the largest proportion to overall weekly concentrations 37%, 30%, and 17% respectively. Simultaneous pulse events of perfluorooctanesulfonic acid (PFOS; 400 ng L-1) and perfluoroheptanesulfonic acid (PFHpS; 18 ng L-1) indicate significant industrial or commercial waste discharge that persists for up to 3 h. The minimum number of hourly grab samples required to detect variation of PFOS and PFHpS concentrations are 7 and 9 samples respectively, indicating a high degree of variability in PFAS concentrations between days. Overall, the risk of sampling bias from grab samples is high given the variability in PFAS concentrations and more frequent sampling campaigns must be balanced against the cost of analysis carefully to avoid the mischaracterisation of mass flux to receiving surface waters.

Identification of novel polyfluoroalkyl substances in surface water runoff from a chemical stockpile fire.

In 2018, over 30,000 L of fluorine-free firefighting foam was used to extinguish an industrial warehouse fire of uncharacterized chemical and industrial waste. Contaminated firewater and runoff were discharged to an adjacent freshwater creek in Melbourne, Australia. In this study, we applied nontarget analysis using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QToF-MS) to 15 surface water samples to investigate the presence of legacy, novel and emerging per-and polyfluoroalkyl substances (PFAS). We identified six novel and emerging fluorotelomer-based fluorosurfactants in the Australian environment for the first time, including: fluorotelomer sulfonamido betaines (FTABs or FTSA-PrB), fluorotelomer thioether amido sulfonic acids (FTSASs), and fluorotelomer sulfonyl amido sulfonic acids (FTSAS-So). Legacy PFAS including C6-C8 perfluoroalkyl sulfonic acids, C4-C10 perfluoroalkyl carboxylic acids, and perfluoro-4-ethylcyclohexanesulfonate were also detected in surface water. Of note, we report the first environmental detection of ethyl 2-ethenyl-2-fluoro-1-(trifluoromethyl) cyclopropane-1-carboxylate. Analysis of several Class B certified fluorine-free foam formulations allowed for use in Australia revealed that there was no detectable PFAS. Patterns in the homologue profiles of fluorotelomers detected in surface water are consistent with environments impacted by fluorinated aqueous film-forming foams. These results provide strong evidence that firewater runoff of stockpiled fluorinated firefighting foam was the dominant source of detectable PFAS to the surrounding environment.

A baseline study of per- and polyfluoroalkyl substances (PFASs) in waterfowl from a remote Australian environment.

Elevated concentrations of PFASs in the liver may pose a toxicological risk to bird species and humans that consume them. This study aimed to determine concentrations of 43 per- and polyfluoroalkyl substances (PFASs) in livers (n = 80) of Australian Shelducks (Tadorna tadornoides), Pacific Black Ducks (Anas superciliosa), and Teals (Anas sp.), as well as water and sediment from a remote Australian environment. Maximum concentrations of PFBA (1.9 ng L-1), PFOA (1.7 ng L-1) and PFOS (0.99 ng L-1) in water were consistent with long-range atmospheric and oceanic transport. PFOS (30%) and PFNA (22%) were the most frequently detected PFASs in Australian Shelduck livers (0.31 ± 0.68 ng g-1 ww and 0.16 ± 0.15 ng g-1 ww respectively). Maximum concentrations of PFOS in Pacific Black Ducks (50%) and Teals (44%) was 2.4 ng g-1 ww and 5.3 ng g-1 ww respectively. While PFAS levels in birds from this remote environment were below current animal consumption guidelines, continued monitoring of this ecosystem is recommended to assess the human health risk of consumption of wild game.

Occurrence and fate of legacy and novel per- and polyfluoroalkyl substances (PFASs) in freshwater after an industrial fire of unknown chemical stockpiles.

An industrial warehouse illegally storing a large quantity of unknown chemical and industrial waste ignited in an urban area in Melbourne, Australia. The multiday fire required firefighters to use large amounts of fluorine-free foam that carried contaminated firewater runoff into an adjacent freshwater creek. In this study, the occurrence and fate of 42 per- and polyfluoroalkyl substances (PFASs) was determined from triplicate surface water samples (n = 45) from five locations (upstream, point-source, downstream; 8 km) over three sampling campaigns from 2018 to 2020. Out of the 42 target PFASs, perfluorocarboxylates (PFCAs: C4-C14), perfluoroalkane sulfonates (PFSAs: C4-C10), and perfluoroalkyl acid precursors (e.g. 6:2 fluorotelomer sulfonate (6:2 FTSA)) were ubiquitously detected in surface waters (concentration ranges: <0.7-3000 ng/L). A significant difference in ΣPFAS concentration was observed at the point-source (mean 5500 ng/L; 95% CI: 4800, 6300) relative to upstream sites (mean 100 ng/L; 95% CI: 90, 110; p ≤ 0.001). The point-source ΣPFAS concentration decreased from 5500 ± 1200 ng/L to 960 ± 42 ng/L (-83%) after two months and to 430 ± 15 ng/L (-98%) two years later. 6:2 FTSA and perfluorooctanesulfonate (PFOS) dominated in surface water, representing on average 31% and 20% of the ΣPFAS, respectively. Emerging PFASs including a cyclic perfluoroalkanesulfonate (PFECHS) and a C4 perfluoroalkane sulfonamide (FBSA) were repeatedly present in surface water (concentration ranges <0.3-77 ng/L). According to the updated Australian PFAS guidelines for ecological conservation, the water samples collected at the time of monitoring may have posed a short-term risk to aquatic organisms in regard to PFOS levels. These results illustrate that acute high dose exposure to PFASs can result from industrial fires at sites storing or stockpiling PFAS-based waste products. Continued monitoring will be crucial to evaluate potential long-term risk to wildlife in the region.

Correlations between Per- and Polyfluoroalkyl Substances and Body Morphometrics in Fledgling Shearwaters Impacted by Plastic Consumption from a Remote Pacific Island.

We investigated the concentrations of 45 per- and polyfluoroalkyl substances (PFASs) in fledgling flesh-footed shearwater (Ardenna carneipes; n = 33) and wedge-tailed shearwater (A. pacifica; n = 9) livers via liquid chromatography-tandem mass spectrometry and their relationship to body morphometrics and ingested plastic mass recorded in 2019 on Lord Howe Island (NSW, Australia). Sixteen PFASs were detected, of which perfluorooctanesulfonate (PFOS) was the dominant compound, detected in 100% of birds (1.34-13.4 ng/g wet wt). Long-chain perfluorocarboxylic acids, including perfluorodecanoic acid (PFDA; <0.04-0.79 ng/g wet wt) and perfluorotridecanoic acid (PFTrDA; <0.05-1.6 ng/g wet wt) were detected in >50% of birds. There was a positive correlation between PFDA and PFTrDA concentrations and wing chord length (Rs = 0.36, p = 0.0204; Rs = 0.44, p = 0.0037, respectively), and between PFDA concentrations and total body mass (Rs = 0.33, p = 0.032), suggesting that these compounds may impact shearwater fledgling morphometrics. Plastic was present in the intestinal tract of 79% of individuals (<7.6 g), although there was no correlation between PFAS concentrations and plastic mass, indicating that ingested plastic is not the likely primary exposure source. The widespread occurrence of PFASs in fledgling marine birds from a relatively pristine location in the Southern Hemisphere suggests that further studies in adult shearwaters and other marine birds are warranted to investigate whether there are any long-term physiological effects on bird species. Environ Toxicol Chem 2021;40:799-810. © 2020 SETAC.

Contamination of groundwater with per- and polyfluoroalkyl substances (PFAS) from legacy landfills in an urban re-development precinct.

The extent of per- and polyfluoroalkyl substances (PFAS) in groundwater surrounding legacy landfills is currently poorly constrained. Seventeen PFAS were analysed in groundwater surrounding legacy landfills in a major Australian urban re-development precinct. Sampling locations (n = 13) included sites installed directly in waste material and down-gradient from landfills, some of which exhibited evidence of leachate contamination including elevated concentrations of ammonia-N (≤106 mg/L), bicarbonate (≤1,740 mg/L) and dissolved methane (≤10.4 mg/L). Between one and fourteen PFAS were detected at all sites and PFOS, PFHxS, PFOA and PFBS were detected in all samples. The sum of detected PFAS (∑14PFAS) varied from 26 ng/L at an ambient background site to 5,200 ng/L near a potential industrial point-source. PFHxS had the highest median concentration (34 ng/L; range: 2.6-280 ng/L) followed by PFOS (26 ng/L; range: 1.3-4,800 ng/L), PFHxA (19 ng/L; range:

An investigation into per- and polyfluoroalkyl substances (PFAS) in nineteen Australian wastewater treatment plants (WWTPs).

Quantifying the emissions of per- and polyfluoroalkyl substances (PFAS) from Australian wastewater treatment plants (WWTP) is of high importance due to potential impacts on receiving aquatic ecosystems. The new Australian PFAS National Environmental Management Plan recommends 0.23 ng L-1 of PFOS as the guideline value for 99% species protection for aquatic systems. In this study, 21 PFAS from four classes were measured in WWTP solid and aqueous samples from 19 Australian WWTPs. The mean ∑21PFAS was 110 ng L-1 (median: 80 ng L-1; range: 9.3-520 ng L-1) in aqueous samples and 34 ng g-1 dw (median: 12 ng g-1 dw; range: 2.0-130 ng g-1 dw) in WWTP solids. Similar to WWTPs worldwide, perfluorocarboxylic acids were generally higher in effluent, compared to influent. Partitioning to solids within WWTPs increased with increasing fluoroalkyl chain length from 0.05 to 1.22 log units. Many PFAS were highly correlated, and PCA analysis showed strong associations between two groups: odd chained PFCAs, PFHxA and PFSAs; and 6:2 FTS with daily inflow volume and the proportion of trade waste accepted by WWTPs (as % of typical dry inflow). The compounds PFPeA, PFHxA, PFHpA, PFOA, PFNA, and PFDA increased significantly between influent and final effluent. The compounds 6:2 FTS and 8:2 FTS were quantified and F-53B detected and reported in Australian WWTP matrices. The compound 6:2 FTS was an important contributor to PFAS emissions in the studied Australian WWTPs, supporting the need for future research on its sources (including precursor degradation), environmental fate and impact in Australian aquatic environments receiving WWTP effluent.

Investigating recycled water use as a diffuse source of per- and polyfluoroalkyl substances (PFASs) to groundwater in Melbourne, Australia.

The purpose of this study was to investigate the contribution of per- and polyfluoroalkyl substances (PFASs) to groundwater at a location where recycled water from a wastewater treatment plant (WWTP) is used to irrigate crops. Groundwater from Werribee South, located west of Melbourne, Australia, was sampled over two campaigns in 2017 and 2018, extracted using solid phase extraction (SPE) and analysed with liquid chromatography-tandem mass spectrometry (LC-MS/MS-QQQ). PFASs were detected in 100% of the groundwater samples. The sum total of twenty PFAS compounds (∑20PFASs) for all sites in the study ranged from <0.03 to 74 ng/L (n = 28) and the highest levels of which were observed in the centre of the irrigation district. Perfluorooctanesulfonic acid (PFOS) was the most detected compound overall (96%) with a mean concentration of 11 ng/L (<0.03-34 ng/L), followed by perfluorobutanesulfonic acid (PFBS; 86%, 4.4 ng/L), perfluorooctanoic acid (PFOA; 82%, 2.2 ng/L) and perfluorobutanoic acid (PFBA; 77%, 6.1 ng/L). Concentrations of PFASs found in this study are greater than background levels of PFASs detected in groundwater and are in the range of concentrations typically detected in wastewater effluent. This study presents evidence that the use of recycled water can be a source of PFAS contamination to groundwater.