Manipulating chiral spin transport with ferroelectric polarization.

A magnon is a collective excitation of the spin structure in a magnetic insulator and can transmit spin angular momentum with negligible dissipation. This quantum of a spin wave has always been manipulated through magnetic dipoles (that is, by breaking time-reversal symmetry). Here we report the experimental observation of chiral spin transport in multiferroic BiFeO3 and its control by reversing the ferroelectric polarization (that is, by breaking spatial inversion symmetry). The ferroelectrically controlled magnons show up to 18% modulation at room temperature. The spin torque that the magnons in BiFeO3 carry can be used to efficiently switch the magnetization of adjacent magnets, with a spin-torque efficiency comparable to the spin Hall effect in heavy metals. Utilizing such controllable magnon generation and transmission in BiFeO3, an all-oxide, energy-scalable logic is demonstrated composed of spin-orbit injection, detection and magnetoelectric control. Our observations open a new chapter of multiferroic magnons and pave another path towards low-dissipation nanoelectronics.

Nonvolatile Electric Field Control of Thermal Magnons in the Absence of an Applied Magnetic Field.

Spin transport through magnetic insulators has been demonstrated in a variety of materials and is an emerging pathway for next-generation spin-based computing. To modulate spin transport in these systems, one typically applies a sufficiently strong magnetic field to allow for deterministic control of magnetic order. Here, we make use of the well-known multiferroic magnetoelectric, BiFeO_{3}, to demonstrate nonvolatile, hysteretic, electric-field control of thermally excited magnon current in the absence of an applied magnetic field. These findings are an important step toward magnon-based devices, where electric-field-only control is highly desirable.

Dynamic Hybrid Metasurfaces.

Efficient hybrid plasmonic-photonic metasurfaces that simultaneously take advantage of the potential of both pure metallic and all-dielectric nanoantennas are identified as an emerging technology in flat optics. Nevertheless, postfabrication tunable hybrid metasurfaces are still elusive. Here, we present a reconfigurable hybrid metasurface platform by incorporating the phase-change material Ge2Sb2Te5 (GST) into metal-dielectric meta-atoms for active and nonvolatile tuning of properties of light. We systematically design a reduced-dimension meta-atom, which selectively controls the hybrid plasmonic-photonic resonances of the metasurface via the dynamic change of optical constants of GST without compromising the scattering efficiency. As a proof-of-concept, we experimentally demonstrate two tunable metasurfaces that control the amplitude (with relative modulation depth as high as ≈80%) or phase (with tunability >230°) of incident light promising for high-contrast optical switching and efficient anomalous to specular beam deflection, respectively. Our findings further substantiate dynamic hybrid metasurfaces as compelling candidates for next-generation reprogrammable meta-optics.

ITO-based microheaters for reversible multi-stage switching of phase-change materials: towards miniaturized beyond-binary reconfigurable integrated photonics.

Inducing a large refractive-index change is the holy grail of reconfigurable photonic structures, a goal that has long been the driving force behind the discovery of new optical material platforms. Recently, the unprecedentedly large refractive-index contrast between the amorphous and crystalline states of Ge-Sb-Te (GST)-based phase-change materials (PCMs) has attracted tremendous attention for reconfigurable integrated nanophotonics. Here, we introduce a microheater platform that employs optically transparent and electrically conductive indium-tin-oxide (ITO) bridges for the fast and reversible electrical switching of the GST phase between crystalline and amorphous states. By the proper assignment of electrical pulses applied to the ITO microheater, we show that our platform allows for the registration of virtually any intermediate crystalline state into the GST film integrated on the top of the designed microheaters. More importantly, we demonstrate the full reversibility of the GST phase between amorphous and crystalline states. To show the feasibility of using this hybrid GST/ITO platform for miniaturized integrated nanophotonic structures, we integrate our designed microheaters into the arms of a Mach-Zehnder interferometer to realize electrically reconfigurable optical phase shifters with orders of magnitude smaller footprints compared to existing integrated photonic architectures. We show that the phase of optical signals can be gradually shifted in multiple intermediate states using a structure that can potentially be smaller than a single wavelength. We believe that our study showcases the possibility of forming a whole new class of miniaturized reconfigurable integrated nanophotonics using beyond-binary reconfiguration of optical functionalities in hybrid PCM-photonic devices.

Photocarrier-Induced Active Control of Second-Order Optical Nonlinearity in Monolayer MoS2.

Atomically thin transition metal dichalcogenides (TMDs) in their excited states can serve as exceptionally small building blocks for active optical platforms. In this scheme, optical excitation provides a practical approach to control light-TMD interactions via the photocarrier generation, in an ultrafast manner. Here, it is demonstrated that via a controlled generation of photocarriers the second-harmonic generation (SHG) from a monolayer MoS2 crystal can be substantially modulated up to ≈55% within a timeframe of ≈250 fs, a set of performance characteristics that showcases the promise of low-dimensional materials for all-optical nonlinear data processing. The combined experimental and theoretical study suggests that the large SHG modulation stems from the correlation between the second-order dielectric susceptibility χ(2) and the density of photoexcited carriers in MoS2 . Indeed, the depopulation of the conduction band electrons, at the vicinity of the high-symmetry K/K' points of MoS2 , suppresses the contribution of interband electronic transitions in the effective χ(2) of the monolayer crystal, enabling the all-optical modulation of the SHG signal. The strong dependence of the second-order optical response on the density of photocarriers reveals the promise of time-resolved nonlinear characterization as an alternative route to monitoring carrier dynamics in excited states of TMDs.

Ultrafast Control of Phase and Polarization of Light Expedited by Hot-Electron Transfer.

All-optical modulation is an entangled part of ultrafast nonlinear optics with promising impacts on tunable optical devices in the future. Current advancements in all-optical control predominantly offer modulation by means of altering light intensity, while the ultrafast manipulation of other attributes of light have yet to be further explored. Here, we demonstrate the active modulation of the phase, polarization, and amplitude of light through the nonlinear modification of the optical response of a plasmonic crystal that supports subradiant, high Q, and polarization-selective resonance modes. The designed mode is exclusively accessible via TM-polarized light, which enables significant phase modulation and polarization conversion within the visible spectrum. To tailor the device performance in the time domain, we exploit the ultrafast transport dynamics of hot electrons at the interface of plasmonic metals and charge acceptor materials to facilitate an ultrafast switching speed. In addition, the operating wavelength of the proposed device can be tuned through the control of the in-plane momentum of light. Our work reveals the viability of dynamic phase and polarization control in plasmonic systems for all-optical switching and data processing.

Electrically driven reprogrammable phase-change metasurface reaching 80% efficiency.

Phase-change materials (PCMs) offer a compelling platform for active metaoptics, owing to their large index contrast and fast yet stable phase transition attributes. Despite recent advances in phase-change metasurfaces, a fully integrable solution that combines pronounced tuning measures, i.e., efficiency, dynamic range, speed, and power consumption, is still elusive. Here, we demonstrate an in situ electrically driven tunable metasurface by harnessing the full potential of a PCM alloy, Ge2Sb2Te5 (GST), to realize non-volatile, reversible, multilevel, fast, and remarkable optical modulation in the near-infrared spectral range. Such a reprogrammable platform presents a record eleven-fold change in the reflectance (absolute reflectance contrast reaching 80%), unprecedented quasi-continuous spectral tuning over 250 nm, and switching speed that can potentially reach a few kHz. Our scalable heterostructure architecture capitalizes on the integration of a robust resistive microheater decoupled from an optically smart metasurface enabling good modal overlap with an ultrathin layer of the largest index contrast PCM to sustain high scattering efficiency even after several reversible phase transitions. We further experimentally demonstrate an electrically reconfigurable phase-change gradient metasurface capable of steering an incident light beam into different diffraction orders. This work represents a critical advance towards the development of fully integrable dynamic metasurfaces and their potential for beamforming applications.

Synthetic Engineering of Morphology and Electronic Band Gap in Lateral Heterostructures of Monolayer Transition Metal Dichalcogenides.

Heterostructures of two-dimensional transition metal dichalcogenides (TMDs) can offer a plethora of opportunities in condensed matter physics, materials science, and device engineering. However, despite state-of-the-art demonstrations, most current methods lack enough degrees of freedom for the synthesis of heterostructures with engineerable properties. Here, we demonstrate that combining a postgrowth chalcogen-swapping procedure with the standard lithography enables the realization of lateral TMD heterostructures with controllable dimensions and spatial profiles in predefined locations on a substrate. Indeed, our protocol receives a monolithic TMD monolayer (e.g., MoSe2) as the input and delivers lateral heterostructures (e.g., MoSe2-MoS2) with fully engineerable morphologies. In addition, through establishing MoS2xSe2(1-x)-MoS2ySe2(1-y) lateral junctions, our synthesis protocol offers an extra degree of freedom for engineering the band gap energies up to ∼320 meV on each side of the heterostructure junction via changing x and y independently. Our electron microscopy analysis reveals that such continuous tuning stems from the random intermixing of sulfur and selenium atoms following the chalcogen swapping. We believe that, by adding an engineering flavor to the synthesis of TMD heterostructures, our study lowers the barrier for the integration of two-dimensional materials into practical optoelectronic platforms.

Hot-Electron-Assisted Femtosecond All-Optical Modulation in Plasmonics.

The optical Kerr nonlinearity of plasmonic metals provides enticing prospects for developing reconfigurable and ultracompact all-optical modulators. In nanostructured metals, the coherent coupling of light energy to plasmon resonances creates a nonequilibrium electron distribution at an elevated electron temperature that gives rise to significant Kerr optical nonlinearities. Although enhanced nonlinear responses of metals facilitate the realization of efficient modulation devices, the intrinsically slow relaxation dynamics of the photoexcited carriers, primarily governed by electron-phonon interactions, impedes ultrafast all-optical modulation. Here, femtosecond (≈190 fs) all-optical modulation in plasmonic systems via the activation of relaxation pathways for hot electrons at the interface of metals and electron acceptor materials, following an on-resonance excitation of subradiant lattice plasmon modes, is demonstrated. Both the relaxation kinetics and the optical nonlinearity can be actively tuned by leveraging the spectral response of the plasmonic design in the linear regime. The findings offer an opportunity to exploit hot-electron-induced nonlinearities for design of self-contained, ultrafast, and low-power all-optical modulators based on plasmonic platforms.

Defect-Mediated Alloying of Monolayer Transition-Metal Dichalcogenides.

Alloying plays a central role in tailoring the material properties of 2D transition-metal dichalcogenides (TMDs). However, despite widespread reports, the details of the alloying mechanism in 2D TMDs have remained largely unknown and are yet to be further explored. Here, we combine a set of systematic experiments with ab initio density functional theory (DFT) calculations to unravel a defect-mediated mechanism for the alloying of monolayer TMD crystals. In our alloying approach, a monolayer MoSe2 film serves as a host crystal in which exchanging selenium (Se) atoms with sulfur (S) atoms yields a MoS2 xSe2(1- x) alloy. Our study reveals that the driving force required for the alloying of CVD-grown films with abundant vacancy-type defects is significantly lower than that required for the alloying of exfoliated films with fewer vacancies. Indeed, we show that pre-existing Se vacancies in the host MoSe2 lattice mediate the replacement of chalcogen atoms and facilitate the synthesis of MoS2 xSe2(1- x) alloys. Our DFT calculations suggest that S atoms can bind to Se vacancies and then diffuse throughout the host MoSe2 lattice via exchanging the position with Se vacancies, further supporting our proposed defect-mediated alloying mechanism. Beside native vacancy defects, we show that the existence of large-scale defects in CVD-grown MoSe2 films causes the fracture of alloys under the alloying-induced strain, while no such effect is observed in exfoliated MoSe2 films. Our study provides a deep insight into the details of the alloying mechanism and enables the synthesis of 2D alloys with tunable properties.

Flexible MoS2 Field-Effect Transistors for Gate-Tunable Piezoresistive Strain Sensors.

Atomically thin molybdenum disulfide (MoS2) is a promising two-dimensional semiconductor for high-performance flexible electronics, sensors, transducers, and energy conversion. Here, piezoresistive strain sensing with flexible MoS2 field-effect transistors (FETs) made from highly uniform large-area films is demonstrated. The origin of the piezoresistivity in MoS2 is the strain-induced band gap change, which is confirmed by optical reflection spectroscopy. In addition, the sensitivity to strain can be tuned by more than 1 order of magnitude by adjusting the Fermi level via gate biasing.

A single-cell correlative nanoelectromechanosensing approach to detect cancerous transformation: monitoring the function of F-actin microfilaments in the modulation of the ion channel activity.

Cancerous transformation may be dependent on correlation between electrical disruptions in the cell membrane and mechanical disruptions of cytoskeleton structures. Silicon nanotube (SiNT)-based electrical probes, as ultra-accurate signal recorders with subcellular resolution, may create many opportunities for fundamental biological research and biomedical applications. Here, we used this technology to electrically monitor cellular mechanosensing. The SiNT probe was combined with an electrically activated glass micropipette aspiration system to achieve a new cancer diagnostic technique that is based on real-time correlation between mechanical and electrical behaviour of single cells. Our studies demonstrated marked changes in the electrical response following increases in the mechanical aspiration force in healthy cells. In contrast, such responses were extremely weak for malignant cells. Confocal microscopy results showed the impact of actin microfilament remodelling on the reduction of the electrical response for aspirated cancer cells due to the significant role of actin in modulating the ion channel activity in the cell membrane.

Cell-imprinted substrates act as an artificial niche for skin regeneration.

Bioinspired materials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. In this study, biomimetic micro/nanoenvironments were fabricated by cell-imprinted substrates based on mature human keratinocyte morphological templates. The data obtained from atomic force microscopy and field emission scanning electron microscopy revealed that the keratinocyte-cell-imprinted poly(dimethylsiloxane) casting procedure could imitate the surface morphology of the plasma membrane, ranging from the nanoscale to the macroscale, which may provide the required topographical cell fingerprints to induce differentiation. Gene expression levels of the genes analyzed (involucrin, collagen type I, and keratin 10) together with protein expression data showed that human adipose-derived stem cells (ADSCs) seeded on these cell-imprinted substrates were driven to adopt the specific shape and characteristics of keratinocytes. The observed morphology of the ADSCs grown on the keratinocyte casts was noticeably different from that of stem cells cultivated on the stem-cell-imprinted substrates. Since the shape and geometry of the nucleus could potentially alter the gene expression, we used molecular dynamics to probe the effect of the confining geometry on the chain arrangement of simulated chromatin fibers in the nuclei. The results obtained suggested that induction of mature cell shapes onto stem cells can influence nucleus deformation of the stem cells followed by regulation of target genes. This might pave the way for a reliable, efficient, and cheap approach of controlling stem cell differentiation toward skin cells for wound healing applications.

A vertically aligned carbon nanotube-based impedance sensing biosensor for rapid and high sensitive detection of cancer cells.

A novel vertically aligned carbon nanotube based electrical cell impedance sensing biosensor (CNT-ECIS) was demonstrated for the first time as a more rapid, sensitive and specific device for the detection of cancer cells. This biosensor is based on the fast entrapment of cancer cells on vertically aligned carbon nanotube arrays and leads to mechanical and electrical interactions between CNT tips and entrapped cell membranes, changing the impedance of the biosensor. CNT-ECIS was fabricated through a photolithography process on Ni/SiO(2)/Si layers. Carbon nanotube arrays have been grown on 9 nm thick patterned Ni microelectrodes by DC-PECVD. SW48 colon cancer cells were passed over the surface of CNT covered electrodes to be specifically entrapped on elastic nanotube beams. CNT arrays act as both adhesive and conductive agents and impedance changes occurred as fast as 30 s (for whole entrapment and signaling processes). CNT-ECIS detected the cancer cells with the concentration as low as 4000 cells cm(-2) on its surface and a sensitivity of 1.7 × 10(-3)Ω cm(2). Time and cell efficiency factor (TEF and CEF) parameters were defined which describe the sensor's rapidness and resolution, respectively. TEF and CEF of CNT-ECIS were much higher than other cell based electrical biosensors which are compared in this paper.