Does vaping increase the likelihood of SARS-CoV-2 infection? Paradoxically yes and no.

Data on the relationship between electronic cigarettes (ECs) and SARS-CoV-2 infection are limited and contradictory. Our objectives were to investigate the impact of EC aerosols on SARS-CoV-2 infection of human bronchial epithelial cells and identify the causative chemical(s). Fully differentiated human bronchial epithelial tissues (hBETs) were exposed at the air-liquid interface (ALI) to aerosols produced from JUUL "Virginia Tobacco" and BLU ECs, as well as nicotine, propylene glycol (PG), vegetable glycerin (VG), and benzoic acid, and infection was then evaluated with SARS-CoV-2 pseudoparticles. Pseudoparticle infection of hBETs increased with aerosols produced from PG/VG, PG/VG plus nicotine, or BLU ECs; however, JUUL EC aerosols did not increase infection compared with controls. Increased infection in PG/VG alone was due to enhanced endocytosis, whereas increased infection in PG/VG plus nicotine or in BLU ECs was caused by nicotine-induced elevation of the aerosol's pH, which correlated with increased transmembrane protease, serine 2 (TMPRSS2) activity. Notably, benzoic acid in JUUL aerosols mitigated the enhanced infection caused by PG/VG or nicotine, offering protection that lasted for at least 48 h after exposure. In conclusion, the study demonstrates that EC aerosols can impact susceptibility to SARS-CoV-2 infection depending on their specific ingredients. PG/VG alone or PG/VG plus nicotine enhanced infection through different mechanisms, whereas benzoic acid in JUUL aerosols mitigated the increased infection caused by certain ingredients. These findings highlight the complex relationship between ECs and SARS-CoV-2 susceptibility, emphasizing the importance of considering the specific aerosol ingredients when evaluating the potential effects of ECs on infection risk.NEW & NOTEWORTHY Data on the relationship between electronic cigarettes (ECs) and SARS-CoV-2 infection are limited and contradictory. We investigated the impact of EC aerosols and their ingredients on SARS-CoV-2 infection of human bronchial epithelial cells. Our data show that specific ingredients in EC aerosols impact the susceptibility to SARS-CoV-2 infection. Propylene glycol (PG)/vegetable glycerin (VG) alone or PG/VG plus nicotine enhanced infection through different mechanisms, whereas benzoic acid in JUUL aerosols mitigated the increased infection caused by these ingredients.

Exposure, Retention, Exhalation, Symptoms, and Environmental Accumulation of Chemicals During JUUL Vaping.

Little is known about the chemical exposures that electronic cigarette (EC) users receive and emit during JUUL vaping and if exposures produce symptoms dose dependently. This study examined chemical exposure (dose), retention, symptoms during vaping, and the environmental accumulation of exhaled propylene glycol (PG), glycerol (G), nicotine, and menthol in a cohort of human participants who vaped JUUL "Menthol" ECs. We refer to this environmental accumulation as "EC exhaled aerosol residue" (ECEAR). Chemicals were quantified using gas chromatography/mass spectrometry in JUUL pods before and after use, lab-generated aerosols, human exhaled aerosols, and in ECEAR. Unvaped JUUL "Menthol" pods contained ∼621.3 mg/mL of G, ∼264.9 mg/mL of PG, ∼59.3 mg/mL of nicotine, ∼13.3 mg/mL of menthol, and ∼0.1 mg/mL of the coolant WS-23. Eleven experienced male EC users (aged 21-26) provided exhaled aerosol and residue samples before and after vaping JUUL pods. Participants vaped ad libitum for 20 min, while their average puff count (22 ± 6.4) and puff duration (4.4 ± 2.0) were recorded. The transfer efficiency of nicotine, menthol, and WS-23 from the pod fluid into the aerosol varied with each chemical and was generally similar across flow rates (9-47 mL/s). At 21 mL/s, the average mass of each chemical retained by the participants who vaped 20 min was 53.2 ± 40.3 mg for G, 18.9 ± 14.3 mg for PG, 3.3 ± 2.7 mg for nicotine, and 0.5 ± 0.4 mg for menthol, with retention deduced to be ∼90-100% for each chemical. There was a significant positive relationship between the number of symptoms during vaping and total chemical mass retained. ECEAR accumulated on enclosed surfaces where it could contribute to passive exposure. These data will be valuable to researchers studying human exposure to EC aerosols and agencies that regulate EC products.

Policy-relevant differences between secondhand and thirdhand smoke: strengthening protections from involuntary exposure to tobacco smoke pollutants.

Starting in the 1970s, individuals, businesses and the public have increasingly benefited from policies prohibiting smoking indoors, saving thousands of lives and billions of dollars in healthcare expenditures. Smokefree policies to protect against secondhand smoke exposure, however, do not fully protect the public from the persistent and toxic chemical residues from tobacco smoke (also known as thirdhand smoke) that linger in indoor environments for years after smoking stops. Nor do these policies address the economic costs that individuals, businesses and the public bear in their attempts to remediate this toxic residue. We discuss policy-relevant differences between secondhand smoke and thirdhand smoke exposure: persistent pollutant reservoirs, pollutant transport, routes of exposure, the time gap between initial cause and effect, and remediation and disposal. We examine four policy considerations to better protect the public from involuntary exposure to tobacco smoke pollutants from all sources. We call for (a) redefining smokefree as free of tobacco smoke pollutants from secondhand and thirdhand smoke; (b) eliminating exemptions to comprehensive smoking bans; (c) identifying indoor environments with significant thirdhand smoke reservoirs; and (d) remediating thirdhand smoke. We use the case of California as an example of how secondhand smoke-protective laws may be strengthened to encompass thirdhand smoke protections. The health risks and economic costs of thirdhand smoke require that smokefree policies, environmental protections, real estate and rental disclosure policies, tenant protections, and consumer protection laws be strengthened to ensure that the public is fully protected from and informed about the risks of thirdhand smoke exposure.

Disposable Puff Bar Electronic Cigarettes: Chemical Composition and Toxicity of E-liquids and a Synthetic Coolant.

The popularity of disposable fourth-generation electronic cigarettes (ECs) among young adults and adolescents has been increasing since the ban on flavored cartridge EC products such as JUUL. Although the constituents and toxicity of some cartridge-based fourth-generation ECs, such as JUUL, have been studied, limited data exist for other disposable ECs such as Puff. The purpose of this study was to determine flavor chemicals, synthetic coolants, and nicotine concentrations in 16 disposable Puff devices, evaluate the cytotoxicity of the different flavors from the Puff brand using in vitro assays, and investigate the health risks of synthetic coolants in EC products. Gas chromatography/mass spectrometry was used to identify and quantify chemicals in Puff EC fluids. One hundred and twenty-six flavor chemicals were identified in Puff fluids, and 16 were >1 mg/mL. WS-23 (2-isopropyl-N,2,3-trimethylbutyramide) was present in all products, and concentrations ranged from 0.8 to 45.1 mg/mL. WS-3 (N-ethyl-p-menthane-3-carboxamide) concentrations ranged from 1.5 to 16.4 mg/mL in 6/16 products. Nicotine concentrations ranged from 40.6 to 52.4 (average 44.8 mg/mL). All unvaped fluids were cytotoxic at dilutions between 0.1 and 10% in the MTT and neutral red uptake assays when tested with BEAS-2B lung epithelial cells. The cytotoxicity of Puff fluids was highly correlated with total chemical concentrations, nicotine, WS-23, both synthetic coolants, and synthetic coolants plus ethyl maltol. Lower concentrations of WS-23 than those in the fluids adversely affected cell growth and morphology. Concentrations of synthetic coolants exceeded levels used in consumer products. The margin of exposure data showed that WS-3 and WS-23 concentrations were high enough in Puff products to present a health hazard. Our study demonstrates that disposable Puff ECs have high levels of cytotoxic chemicals. The data support the regulation of flavor chemicals and synthetic coolants in ECs to limit potentially harmful health effects.

Exposure to Cigarette Smoke Impedes Human Osteoblast Differentiation Independently of Nicotine.

INTRODUCTION: Tobacco smoking has been implicated in an array of adverse health outcomes, including those that affect adult bone. However, little is known about the impact of tobacco products on developing bone tissue as it develops in the embryo. AIMS AND METHODS: Here, human embryonic stem cells were differentiated into osteoblasts in vitro and concomitantly exposed to various concentrations of smoke solutions from two conventional, one additive-free and two harm-reduction brands of cigarettes. Differentiation inhibition was determined by calcium assays that quantified matrix mineralization and compared to the cytotoxicity of the tobacco product. RESULTS: Exposure to mainstream smoke from conventional and additive-free cigarettes caused no inhibition of cell viability or mineralization, while sidestream smoke (SS) concentration-dependently produced cell death. In contrast, mineralization was inhibited only by the highest mainstream concentration of harm-reduction smoke solution. Additionally, sidestream smoke solution from the harm-reduction cigarettes impeded calcification at concentrations lower than those determined to be cytotoxic for conventional products. CONCLUSIONS: Sidestream smoke impaired in vitro osteogenesis at subtoxic concentrations. In addition, though often perceived as safer, smoke from harm-reduction cigarettes was more potent in inhibiting in vitro osteogenesis than smoke from conventional cigarettes. IMPLICATIONS: This study adds to a growing list of adverse outcomes associated with pre-natal tobacco exposure. Specifically, in vitro exposure to tobacco products interfered with osteogenic differentiation of human embryonic stem cells, a well-established surrogate model for human embryonic bone development. Contrasting a diverse array of tobacco products unveiled that sidestream smoke was generally more developmentally osteotoxic than mainstream smoke and that harm-reduction products may not be less harmful than conventional products, adverse effects that were seemingly independent of nicotine.

Flavour chemicals, synthetic coolants and pulegone in popular mint-flavoured and menthol-flavoured e-cigarettes.

BACKGROUND: The Food and Drug Administration (FDA) has recently banned flavours from pod-style electronic cigarettes (e-cigarettes), except for menthol and tobacco. JUUL customers have quickly discovered that flavoured disposable e-cigarettes from other manufacturers, such as Puff, are readily available. Our goal was to compare flavour chemicals, synthetic coolants and pulegone in mint-flavoured/menthol-flavoured e-cigarettes from JUUL and Puff, evaluate the cytotoxicity of the coolants and perform a cancer risk assessment for pulegone, which is present in both JUUL pods and disposable Puff products. METHODS: Identification and quantification of chemicals were performed using gas chromatography/mass spectrometry. Cytotoxicity of the coolants was evaluated with BEAS-2B cells using the MTT 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The cancer risk of pulegone was calculated using the margin of exposure (MOE). RESULTS: Menthol was the dominant flavour chemical (>1 mg/mL) in all products from both manufacturers. Minor flavour chemicals (<1 mg/mL) differed in the JUUL and Puff fluids and may produce flavour accents. The concentrations of WS-3 and WS-23 were higher in Puff than in JUUL. WS-23 was cytotoxic in the MTT assay at concentrations 90 times lower than concentrations in Puff fluids. The risk of cancer (MOE<10 000) was greater for mint than for menthol products and greater for Puff than for JUUL. CONCLUSIONS: Switching from flavoured JUUL to Puff e-cigarettes may expose users to increased harm due to the higher levels of WS-23 and pulegone in Puff products. Cancer risk may be reduced in e-cigarettes by using pure menthol rather than mint oils to produce minty-flavoured e-cigarette products.

Ethyl maltol, vanillin, corylone and other conventional confectionery-related flavour chemicals dominate in some e-cigarette liquids labelled 'tobacco' flavoured.

BACKGROUND: The increased popularity of electronic cigarettes (e-cigarettes) has been linked to the abundance of flavoured products that are attractive to adolescents and young adults. In the last decade, e-cigarette designs have evolved through four generations that include modifications in battery power, e-cigarette liquid (e-liquid) reservoirs and atomiser units. E-liquids have likewise evolved in terms of solvent use/ratios, concentration and number of flavour chemicals, use of nicotine salts and acids, the recent increased use of synthetic cooling agents and the introduction of synthetic nicotine. Our current objective was to evaluate and compare the evolving composition of tobacco-flavoured e-liquids over the last 10 years. METHODS: Our extensive database of flavour chemicals in e-liquids was used to identify trends and changes in flavour chemical composition and concentrations. RESULTS: Tobacco-flavoured products purchased in 2010 and 2011 generally had very few flavour chemicals, and their concentrations were generally very low. In tobacco-flavoured refill fluids purchased in 2019 and Puff Bar Tobacco e-cigarettes, the total number and concentration of flavour chemicals were higher than expected. Products with total flavour chemicals >10 mg/mL contained one to five dominant flavour chemicals (>1 mg/mL). The most frequently used flavour chemicals in tobacco e-liquids were fruity and caramellic. CONCLUSIONS: There is a need for continuous surveillance of e-liquids, which are evolving in often subtle and harmful ways. Chemical constituents of tobacco flavours should be monitored as they clearly can be doctored by manufacturers to have a taste that would appeal to young users.

Menthol in electronic cigarettes: A contributor to respiratory disease?

Menthol is widely used in tobacco products. This study compared the effects of menthol on human bronchial epithelium using submerged cultures, a VITROCELL® cloud chamber that provides air liquid interface (ALI) exposure without solvents or heating, and a Cultex ALI system that delivers aerosol equivalent to that inhaled during vaping. In submerged culture, menthol significantly increased calcium influx and mitochondrial reactive oxygen species (ROS) via the TRPM8 receptor, responses that were inhibited by a TRPM8 antagonist. VITROCELL® cloud chamber exposure of BEAS-2B monolayers increased mitochondrial protein oxidation, expression of the antioxidant enzyme SOD2, activation of NF-κB, and secretion of inflammatory cytokines (IL-6 and IL-8). Proteomics data collected following ALI exposure of 3D EpiAirway tissue in the Cultex showed upregulation of NRF-2-mediated oxidative stress, oxidative phosphorylation, and IL-8 signaling. Across the three platforms, menthol adversely effected human bronchial epithelium in a manner that could lead to respiratory disease.

Electronic Cigarette Refill Fluids Sold Worldwide: Flavor Chemical Composition, Toxicity, and Hazard Analysis.

Flavor chemicals in electronic cigarette (EC) fluids, which may negatively impact human health, have been studied in a limited number of countries/locations. To gain an understanding of how the composition and concentrations of flavor chemicals in ECs are influenced by product sale location, we evaluated refill fluids manufactured by one company (Ritchy LTD) and purchased worldwide. Flavor chemicals were identified and quantified using gas chromatography/mass spectrometry (GC/MS). We then screened the fluids for their effects on cytotoxicity (MTT assay) and proliferation (live-cell imaging) and tested authentic standards of specific flavor chemicals to identify those that were cytotoxic at concentrations found in refill fluids. A total of 126 flavor chemicals were detected in 103 bottles of refill fluid, and their number per/bottle ranged from 1-50 based on our target list. Two products had none of the flavor chemicals on our target list, nor did they have any nontargeted flavor chemicals. A total of 28 flavor chemicals were present at concentrations ≥1 mg/mL in at least one product, and 6 of these were present at concentrations ≥10 mg/mL. The total flavor chemical concentration was ≥1 mg/mL in 70% of the refill fluids and ≥10 mg/mL in 26%. For sub-brand duplicate bottles purchased in different countries, flavor chemical concentrations were similar and induced similar responses in the in vitro assays (cytotoxicity and cell growth inhibition). The levels of furaneol, benzyl alcohol, ethyl maltol, ethyl vanillin, corylone, and vanillin were significantly correlated with cytotoxicity. The margin of exposure calculations showed that pulegone and estragole levels were high enough in some products to present a nontrivial calculated risk for cancer. Flavor chemical concentrations in refill fluids often exceeded concentrations permitted in other consumer products. These data support the regulation of flavor chemicals in EC products to reduce their potential for producing both cancer and noncancer toxicological effects.

Chemical Elements in Electronic Cigarette Solvents and Aerosols Inhibit Mitochondrial Reductases and Induce Oxidative Stress.

INTRODUCTION: Chemical elements and their toxicity were evaluated in electronic cigarette (EC) solvents, fluids, and aerosols. AIMS AND METHODS: Element identification and quantification in propylene glycol (PG), glycerin (G), refill fluids before and after use, and aerosols was done using inductively coupled plasma optical emission spectrometry. Cytotoxicity and oxidative stress were evaluated using in vitro assays. RESULTS: Seven elements were present in PG, G, and popular refill fluids, and they transferred to aerosols made with ECs. Selenium was in all products (0.125-0.292 mg/L), while arsenic, aluminum, and tin were frequently in solvent and refill fluid samples at lower concentrations. Iron, chromium, copper, nickel, zinc, and lead were only detected in fluid after EC use, indicating they came from heated atomizers. Elements transferred most efficiently to aerosols made with second-/third-generation ECs. Of the elements in fluid, selenium and arsenic were the most cytotoxic to human bronchial epithelial cells (BEAS-2B) and pulmonary fibroblasts in the 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide assay. Selenium increased superoxide production in mitochondria and nucleoli and elevated selenoprotein H in nucleoli of BEAS-2B cells at concentrations found in EC aerosols (10 nM or 0.002 mg/L). CONCLUSIONS: Elements in EC aerosols came from both e-fluids and atomizing units. Within second-/third-generation products, transfer became more efficient as power increased. In vitro responses occurred at concentrations of selenium found in some EC aerosols. Human exposure to chemical elements in ECs could be reduced by regulating (decreasing) allowable EC power and by improving the purity of PG and G. IMPLICATIONS: PG, G, refill fluids, and e-fluids contained potentially toxic chemical elements that transferred to aerosols. Transfer was more efficient in second- and third-generation EC products and increased as power increased. Selenium and arsenic were the most cytotoxic of the elements tested in the 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide assay. Selenium tetrachloride-induced oxidative stress in BEAS-2B cells, but not in human pulmonary fibroblasts. All fluids contained selenium above the concentration that induced oxidative stress in human bronchial epithelial cells. Selenium increased superoxide in mitochondria and nucleoli and increased selenoprotein H, a redox responsive DNA-binding protein that is upregulated by superoxide and an indicator of nucleolar stress. EC users are exposed to elements in aerosols, which may with chronic exposure contribute to diseases associated with oxidative stress.

Highly efficient genome editing via CRISPR-Cas9 in human pluripotent stem cells is achieved by transient BCL-XL overexpression.

Genome editing of human induced pluripotent stem cells (iPSCs) is instrumental for functional genomics, disease modeling, and regenerative medicine. However, low editing efficiency has hampered the applications of CRISPR-Cas9 technology in creating knockin (KI) or knockout (KO) iPSC lines, which is largely due to massive cell death after electroporation with editing plasmids. Here, we report that the transient delivery of BCL-XL increases iPSC survival by ∼10-fold after plasmid transfection, leading to a 20- to 100-fold increase in homology-directed repair (HDR) KI efficiency and a 5-fold increase in non-homologous end joining (NHEJ) KO efficiency. Treatment with a BCL inhibitor ABT-263 further improves HDR efficiency by 70% and KO efficiency by 40%. The increased genome editing efficiency is attributed to higher expressions of Cas9 and sgRNA in surviving cells after electroporation. HDR or NHEJ efficiency reaches 95% with dual editing followed by selection of cells with HDR insertion of a selective gene. Moreover, KO efficiency of 100% can be achieved in a bulk population of cells with biallelic HDR KO followed by double selection, abrogating the necessity for single cell cloning. Taken together, these simple yet highly efficient editing strategies provide useful tools for applications ranging from manipulating human iPSC genomes to creating gene-modified animal models.

Health Effects Associated With Electronic Cigarette Use: Automated Mining of Online Forums.

BACKGROUND: Our previous infodemiological study was performed by manually mining health-effect data associated with electronic cigarettes (ECs) from online forums. Manual mining is time consuming and limits the number of posts that can be retrieved. OBJECTIVE: Our goal in this study was to automatically extract and analyze a large number (>41,000) of online forum posts related to the health effects associated with EC use between 2008 and 2015. METHODS: Data were annotated with medical concepts from the Unified Medical Language System using a modified version of the MetaMap tool. Of over 1.4 million posts, 41,216 were used to analyze symptoms (undiagnosed conditions) and disorders (physician-diagnosed terminology) associated with EC use. For each post, sentiment (positive, negative, and neutral) was also assigned. RESULTS: Symptom and disorder data were categorized into 12 organ systems or anatomical regions. Most posts on symptoms and disorders contained negative sentiment, and affected systems were similar across all years. Health effects were reported most often in the neurological, mouth and throat, and respiratory systems. The most frequently reported symptoms and disorders were headache (n=939), coughing (n=852), malaise (n=468), asthma (n=916), dehydration (n=803), and pharyngitis (n=565). In addition, users often reported linked symptoms (eg, coughing and headache). CONCLUSIONS: Online forums are a valuable repository of data that can be used to identify positive and negative health effects associated with EC use. By automating extraction of online information, we obtained more data than in our prior study, identified new symptoms and disorders associated with EC use, determined which systems are most frequently adversely affected, identified specific symptoms and disorders most commonly reported, and tracked health effects over 7 years.

High-Nicotine Electronic Cigarette Products: Toxicity of JUUL Fluids and Aerosols Correlates Strongly with Nicotine and Some Flavor Chemical Concentrations.

Whereas JUUL electronic cigarettes (ECs) have captured the majority of the EC market, with a large fraction of their sales going to adolescents, little is known about their cytotoxicity and potential effects on health. The purpose of this study was to determine flavor chemical and nicotine concentrations in the eight currently marketed prefilled JUUL EC cartridges ("pods") and to evaluate the cytotoxicity of the different variants (e.g., "Cool Mint" and "Crème Brulee") using in vitro assays. Nicotine and flavor chemicals were analyzed using gas chromatography-mass spectrometry in pod fluid before and after vaping and in the corresponding aerosols. 59 flavor chemicals were identified in JUUL pod fluids, and 3 were >1 mg/mL. Duplicate pods were similar in flavor chemical composition and concentration. Nicotine concentrations (average 60.9 mg/mL) were significantly higher than those of any EC products we have previously analyzed. The transfer efficiency of individual flavor chemicals that were >1 mg/mL and nicotine from the pod fluid into aerosols was generally 35-80%. All pod fluids were cytotoxic at a 1:10 dilution (10%) in the MTT and neutral red uptake assays when tested with BEAS-2B lung epithelial cells. Most aerosols were cytotoxic in these assays at concentrations between 0.2 and 1.8%. The cytotoxicity of collected aerosol materials was highly correlated with nicotine and ethyl maltol concentrations and moderately to weakly correlated with total flavor chemical concentration and menthol concentration. Our study demonstrates that (1) some JUUL flavor pods have sufficiently high concentrations of flavor chemicals that may make them attractive to youth and (2) the concentrations of nicotine and some flavor chemicals (e.g., ethyl maltol) are high enough to be cytotoxic in acute in vitro assays, emphasizing the need to determine if JUUL products will lead to adverse health effects with chronic use.

Analysis of the elements and metals in multiple generations of electronic cigarette atomizers.

BACKGROUND: Since their release in 2004, electronic cigarettes (ECs) and their atomizers have undergone significant evolution. OBJECTIVE: The purpose of this study was to evaluate and compare the elemental/metal composition of atomizers in cartomizer and tank style ECs produced over a 5-year period. METHODS: Popular cartomizer and tank models of ECs were dissected and photographed using a stereoscopic microscope, and elemental analysis of EC atomizers was done using scanning electron microscopy coupled with energy dispersive x-ray spectroscopy. RESULTS: Eight elements/metals were found in most products across and within brands purchased at different times. These included chromium, nickel, copper, silver, tin, silicon, aluminum, and zinc. Iron and lead were found in some but not all products, while manganese, cobalt, molybdenum, titanium, and tungsten were only found in a few of the products. The metals used in various components were often similar in cartomizer and tank models. Filaments were usually chromium and nickel (nichrome), although in some newer products, the filament also contained iron, copper, and manganese. The thick wire in earlier products was usually copper coated with silver, while in some newer products, the thick wire was predominantly nickel. In all products, the wick was silica, and sheaths, when present, were fiberglass (silicon, oxygen, calcium, aluminum, magnesium). Wire-to-wire joints were either brazed or clamped with brass (copper and zinc), and air-tube-to-thick wire joints, when present, were usually soldered with tin. Tank style products generally lacked a thick wire and sheaths. CONCLUSION: In general, atomizer components in ECs were remarkably similar over time and between brands. Certain elements/metals were consistently found in most models from all generations, and these should be studied carefully to determine if their transfer to aerosols affects user's health and if their accumulation in trash affects the environment.

Identification and quantification of electronic cigarette exhaled aerosol residue chemicals in field sites.

BACKGROUND: Electronic cigarette (EC) users may exhale large clouds of aerosol that can settle on indoor surfaces forming ECEAR (EC exhaled aerosol residue). Little is known about the chemical composition or buildup of this residue. OBJECTIVE: Our objective was to identify and quantify ECEAR chemicals in two field sites: an EC user's living room and a multi-user EC vape shop. METHODS: We examined the buildup of ECEAR in commonly used materials (cotton, polyester, or terrycloth towel) placed inside the field sites. Materials were subjected to different lengths of exposure. Nicotine, nicotine alkaloids, and tobacco-specific nitrosamines (TSNAs) were identified and quantified in unexposed controls and field site samples using analytical chemical techniques. RESULTS: Nicotine and nicotine alkaloids were detected in materials inside the EC user's living room. Concentrations of ECEAR chemicals remained relatively constant over the first 5 months, suggesting some removal of the chemicals by air flow in the room approximating a steady state. ECEAR chemicals were detected in materials inside the vape shop after 6 h of exposure and levels continually increased over a month. By 1 month, the nicotine in the vape shop was 60 times higher than in the EC user's living room. ECEAR chemical concentrations varied in different locations in the vape shop. Control fabrics had either no detectable or very low concentrations of chemicals. CONCLUSIONS: In both field sites, chemicals from exhaled EC aerosols were deposited on indoor surfaces and accumulated over time forming ECEAR. Non-smokers, EC users, and employees of vape shops should be aware of this potential environmental hazard.

iQOS: evidence of pyrolysis and release of a toxicant from plastic.

OBJECTIVE: To evaluate performance of the I quit original smoking (iQOS) heat-not-burn system as a function of cleaning and puffing topography, investigate the validity of manufacturer's claims that this device does not burn tobacco and determine if the polymer-film filter is potentially harmful. METHODS: iQOS performance was evaluated using five running conditions incorporating two different cleaning protocols. Heatsticks were visually and stereomicroscopically inspected preuse and postuse to determine the extent of tobacco plug charring (from pyrolysis) and polymer-film filter melting, and to elucidate the effects of cleaning on charring. Gas chromatography-mass spectrometry headspace analysis was conducted on unused polymer-film filters to determine if potentially toxic chemicals are emitted from the filter during heating. RESULTS: For all testing protocols, pressure drop decreased as puff number increased. Changes in testing protocols did not affect aerosol density. Charring due to pyrolysis (a form of organic matter thermochemical decomposition) was observed in the tobacco plug after use. When the manufacturer's cleaning instructions were followed, both charring of the tobacco plug and melting of the polymer-film filter increased. Headspace analysis of the polymer-film filter revealed the release of formaldehyde cyanohydrin at 90°C, which is well below the maximum temperature reached during normal usage. DISCUSSION: Device usage limitations may contribute to decreases in interpuff intervals, potentially increasing user's intake of nicotine and other harmful chemicals. This study found that the tobacco plug does char and that charring increases when the device is not cleaned between heatsticks. Release of formaldehyde cyanohydrin is a concern as it is highly toxic at very low concentrations.

Electronic cigarette chemicals transfer from a vape shop to a nearby business in a multiple-tenant retail building.

BACKGROUND: Electronic cigarettes (ECs) are nicotine delivery devices that produce aerosol without combustion of tobacco; therefore, they do not produce sidestream smoke. Nevertheless, many users exhale large clouds of aerosol that can result in passive exposure of non-users. Analogous to thirdhand cigarette smoke, the exhaled aerosol also settles on indoor surfaces where it can produce a residue. We refer to this residue as EC exhaled aerosol residue (ECEAR). Our objective was to determine if exhaled EC aerosol transferred from a vape shop in a multiple-tenant retail building, where it was produced, to a nearby business (field site) where it could deposit as ECEAR. METHODS: We examined the build-up of ECEAR in commonly used materials (cotton towel and paper towels) placed inside the field site across from the vape shop. Materials were subjected to short-term (days) and long-term (months) exposures. Nicotine, other alkaloids and tobacco-specific nitrosamines (TSNAs) were identified and quantified in controls and field site samples using analytical chemical techniques. RESULTS: Nicotine and other alkaloids were detected after 1 day of exposure in the field site, and these chemicals generally increased as exposure times increased. TSNAs, which have been linked to carcinogenesis, were also detected in short-term and long-term exposed samples from the field site. CONCLUSIONS: In a multiple-tenant retail building, chemicals in EC aerosol travelled from a vape shop into an adjacent business where they deposited forming ECEAR. Regulatory agencies and tenants occupying such buildings should be aware of this potential environmental hazard.

Circulating monocytes accelerate acute liver failure by IL-6 secretion in monkey.

Acute liver failure (ALF) is associated with high mortality, and a poor understanding of the underlying pathophysiology has resulted in a lack of effective treatments so far. Here, using an amatoxin-induced rhesus monkey model of ALF, we panoramically revealed the cellular and molecular events that lead to the development of ALF. The challenged monkeys with toxins underwent a typical course of ALF including severe hepatic injury, systemic inflammation and eventual death. Adaptive immune was not noticeably disturbed throughout the progress of ALF. A systematic examination of serum factors and cytokines revealed that IL-6 increase was the most rapid and drastic. Interestingly, we found that IL-6 was mainly produced by circulating monocytes. Furthermore, ablation of monocyte-derived IL-6 in mice decreased liver injury and systemic inflammation following chemical injection. Our findings reveal a critical role of circulating monocytes in initiating and accelerating ALF, indicating a potential therapeutic target in clinical treatment for ALF.

Comparing the cytotoxicity of electronic cigarette fluids, aerosols and solvents.

BACKGROUND: As thousands of electronic cigarette (e-cigarette) refill fluids continue to be formulated and distributed, there is a growing need to understand the cytotoxicity of the flavouring chemicals and solvents used in these products to ensure they are safe. The purpose of this study was to compare the cytotoxicity of e-cigarette refill fluids/solvents and their corresponding aerosols using in vitro cultured cells. METHODS: E-cigarette refill fluids and do-it-yourself products were screened in liquid and aerosol form for cytotoxicity using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The sensitivity of human pulmonary fibroblasts, lung epithelial cells (A549) and human embryonic stem cells to liquids and aerosols was compared. Aerosols were produced using Johnson Creek's Vea cartomizer style e-cigarette. RESULTS: A hierarchy of potency was established for the aerosolised products. Our data show that (1) e-cigarette aerosols can produce cytotoxic effects in cultured cells, (2) four patterns of cytotoxicity were found when comparing refill fluids and their corresponding aerosols, (3) fluids accurately predicted aerosol cytotoxicity 74% of the time, (4) stem cells were often more sensitive to aerosols than differentiated cells and (5) 91% of the aerosols made from refill fluids containing only glycerin were cytotoxic, even when produced at a low voltage. CONCLUSIONS: Our data show that various flavours/brands of e-cigarette refill fluids and their aerosols are cytotoxic and demonstrate the need for further evaluation of e-cigarette products to better understand their potential health effects.