Effect of the Proximity to the Quintero-Puchuncaví Industrial Zone on Compounds Isolated from Baccharis macraei Hook. & Arn: Their Antioxidant and Cytotoxic Activity.

Baccharis macraei Hook. & Arn (Asteraceae), commonly known as Vautro, is found in the coastal areas of central-southern Chile, including the industrial zone of Quintero-Puchuncaví, known for the contamination of its soils with heavy metals, which together with other factors generate abiotic stress in plant species, against which they present defensive mechanisms. For this reason, the objective was to evaluate the effect of abiotic stress generated by the proximity of B. macraei to the industrial complex by assessing the physiological and metabolic states reported by the extracts and compounds isolated from the species, as well as the photosynthetic capacity, metal content and production, and antioxidant activity and cytotoxicity against tumorigenic cell lines of the phytoconstituents. To this end, B. macraei was collected at two different distances from the industrial complex, observing that the closer the species is, the greater the concentration of copper in the soil, generating a decrease in the rate of electron transport in situ, but an increase in antioxidant activity with low cytotoxicity. This activity could be due to the presence of flavonoids such as Hispidulin, Cirsimaritina, and Isokaempferida, as well as monoterpenes, oxygenated and non-oxygenated sesquiterpenes identified in this study.

Effect of Industrial Pollution in Puchuncaví Valley on the Medicinal Properties of Senecio fistulosus Poepp. ex Les (Asteraceae): Content of Phytoconstituents and Their Antioxidant and Cytotoxic Activities.

Senecio fistulosus, an endemic plant in Chile, is highly regarded for its medicinal properties and is popular in alternative medicine. It thrives even in polluted areas, like Puchuncaví Valley, Chile. Therefore, the study aimed to assess the impact of industrial pollution in Puchuncaví Valley, Chile, on the phytoconstituent content, as well as the antioxidant and cytotoxic activities, of S. fistulosus. Phenols, flavonoids, and anthraquinones content were measured, alongside the assessment of antioxidant activities. Additionally, a GC-MS analysis was conducted to profile the phytoconstituents, while the cytotoxic potential was evaluated in HT-29 and MCF-7 and cell line non-tumorigenic MCF-10. The Wild sample exhibited a greater concentration of phytoconstituents (0 to 169.48 mg·L-1) compared to the Commercial control (0 to 95.38 mg·L-1), directly correlating with its antioxidant activity. While the Wild species showed cytotoxic activity, the Commercial control demonstrated cytotoxic effects on MCF-10 and MCF-7. Noteworthy compounds identified were hexadecanoic acid (12.76 to 19.57% relative area) and (Z,Z,Z)-9,12,15-octadecatrienoic acid (18.36% relative area), with anticancer properties. In conclusion, the abiotic stress experienced by S. fistulosus led to higher phytoconstituent content and improved antioxidant activity when contrasted with the Commercial control. The Commercial species showed increased cytotoxic activity against both tumorigenic and non-tumorigenic cell lines.

Knowing the enemy: homoacetogens in hydrogen production reactors.

One of the bottlenecks of the hydrogen production by dark fermentation is the low yields obtained because of the homoacetogenesis persistence, a metabolic pathway where H2 and CO2 are consumed to produce acetate. The central reactions of H2 production and homoacetogenesis are catalyzed by enzyme hydrogenase and the formyltetrahydrofolate synthetase, respectively. In this work, genes encoding for the formyltetrahydrofolate synthetase (fthfs) and hydrogenase (hydA) were used to investigate the diversity of homoacetogens as well as their phylogenetic relationships through quantitative PCR (qPCR) and next-generation amplicon sequencing. A total of 70 samples from 19 different H2-producing bioreactors with different configurations and operating conditions were analyzed. Quantification through qPCR showed that the abundance of fthfs and hydA was strongly associated with the type of substrate, organic loading rate, and H2 production performance. In particular, fthfs sequencing revealed that homoacetogens diversity was low with one or two dominant homoacetogens in each sample. Clostridium carboxivorans was detected in the reactors fed with agave hydrolisates; Acetobacterium woodii dominated in systems fed with glucose; Blautia coccoides and unclassified Sporoanaerobacter species were present in reactors fed with cheese whey; finally, Eubacterium limosum and Selenomonas sp. were co-dominant in reactors fed with glycerol. Altogether, quantification and sequencing analysis revealed that the occurrence of homoacetogenesis could take place due to (1) metabolic changes of H2-producing bacteria towards homoacetogenesis or (2) the displacement of H2-producing bacteria by homoacetogens. Overall, it was demonstrated that the fthfs gene was a suitable marker to investigate homoacetogens in H2-producing reactors. KEY POINTS: • qPCR and sequencing analysis revealed two homoacetogenesis phenomena. • fthfs gene was a suitable marker to investigate homoacetogens in H2 reactors.

Microbial communities from 20 different hydrogen-producing reactors studied by 454 pyrosequencing.

To provide new insight into the dark fermentation process, a multi-lateral study was performed to study the microbiology of 20 different lab-scale bioreactors operated in four different countries (Brazil, Chile, Mexico, and Uruguay). Samples (29) were collected from bioreactors with different configurations, operation conditions, and performances. The microbial communities were analyzed using 16S rRNA genes 454 pyrosequencing. The results showed notably uneven communities with a high predominance of a particular genus. The phylum Firmicutes predominated in most of the samples, but the phyla Thermotogae or Proteobacteria dominated in a few samples. Genera from three physiological groups were detected: high-yield hydrogen producers (Clostridium, Kosmotoga, Enterobacter), fermenters with low-hydrogen yield (mostly from Veillonelaceae), and competitors (Lactobacillus). Inocula, reactor configurations, and substrates influence the microbial communities. This is the first joint effort that evaluates hydrogen-producing reactors and operational conditions from different countries and contributes to understand the dark fermentation process.

Simultaneous production and separation of biohydrogen in mixed culture systems by continuous dark fermentation.

Hydrogen production by dark fermentation is one promising technology. However, there are challenges in improving the performance and efficiency of the process. The important factors that must be considered to obtain a suitable process are the source of the inoculum and its pre-treatment, types of substrates, the reactor configurations and the hydrogen partial pressure. Furthermore, to obtain high-quality hydrogen, it is necessary to integrate an effective separation procedure that is compatible with the intrinsic characteristics of a biological process. Recent studies have suggested that a stable and robust process could be established if there was an effective selection of a mixed microbial consortium with metabolic pathways directly targeted to high hydrogen yields. Additionally, the integration of membrane technology for the extraction and separation of the hydrogen produced has advantages for the upgrading step, because this technology could play an important role in reducing the negative effect of the hydrogen partial pressure. Using this technology, it has been possible to implement a production-purification system, the 'hydrogen-extractive membrane bioreactor'. This configuration has great potential for direct applications, such as fuel cells, but studies of new membrane materials, module designs and reactor configurations are required to achieve higher separation efficiencies.

Standardized protocol for determination of biohydrogen potential.

Biohydrogen production potential (BHP) depends on several factors like inoculum source, substrate, pH, among many others. Batch assays are the most common strategy to evaluate such parameters, where the comparison is a challenging task due to the different procedures used. The present method introduces the first internationally validated protocol, evaluated by 8 independent laboratories from 5 different countries, to assess the biohydrogen potential. As quality criteria, a coefficient of variation of the cumulative hydrogen production (H max) was defined to be <15 %. Two options to run BHP batch tests were proposed; a manual protocol with periodic measurements of biogas production, needing conventional laboratory materials and analytical equipment for biogas characterization; and an automatic protocol, which is run in a device developed for online measurements of low biogas production. The detailed procedures for both protocol options are presented, as well as data validating them. The validation showed acceptable repeatability and reproducibility, measured as intra- and inter-laboratory coefficient of variation, which can be reduced up to 9 %.

Microbial ecology of fermentative hydrogen producing bioprocesses: useful insights for driving the ecosystem function.

One of the most important biotechnological challenges is to develop environment friendly technologies to produce new sources of energy. Microbial production of biohydrogen through dark fermentation, by conversion of residual biomass, is an attractive solution for short-term development of bioH2 producing processes. Efficient biohydrogen production relies on complex mixed communities working in tight interaction. Species composition and functional traits are of crucial importance to maintain the ecosystem service. The analysis of microbial community revealed a wide phylogenetic diversity that contributes in different-and still mostly unclear-ways to hydrogen production. Bridging this gap of knowledge between microbial ecology features and ecosystem functionality is essential to optimize the bioprocess and develop strategies toward a maximization of the efficiency and stability of substrate conversion. The aim of this review is to provide a comprehensive overview of the most up-to-date biodata available and discuss the main microbial community features of biohydrogen engineered ecosystems, with a special emphasis on the crucial role of interactions and the relationships between species composition and ecosystem service. The elucidation of intricate relationships between community structure and ecosystem function would make possible to drive ecosystems toward an improved functionality on the basis of microbial ecology principles.