Analysis of single quantum-dot mobility inside 1D nanochannel devices.

We visualized individual quantum dots using a combination of a confining nanochannel and an ultra-sensitive microscope system, equipped with a high numerical aperture lens and a highly sensitive camera. The diffusion coefficients of the confined quantum dots were determined from the experimentally recorded trajectories according to the classical diffusion theory for Brownian motion in two dimensions. The calculated diffusion coefficients were three times smaller than those in bulk solution. These observations confirm and extend the results of Eichmann et al (2008 Langmuir 24 714-21) to smaller particle diameters and more narrow confinement. A detailed analysis shows that the observed reduction in mobility cannot be explained by conventional hydrodynamic theory.

A wafer-scale fabrication method for three-dimensional plasmonic hollow nanopillars.

Access to nanofabrication strategies for crafting three-dimensional plasmonic structures is limited. In this work, a fabrication strategy to produce 3D plasmonic hollow nanopillars (HNPs) using Talbot lithography and I-line photolithography is introduced. This method is named subtractive hybrid lithography (SHL), and permits intermixed usage of nano-and-macroscale patterns. Sputter-redeposition of gold (Au) on the SHL resist pattern yields large areas of dense periodic Au-HNPs. These Au-HNPs are arranged in a square unit cell with a 250 nm pitch. The carefully controlled fabrication process resulted in Au-HNPs with nanoscale dimensions over the Au-HNP dimensions such as an 80 ± 2 nm thick solid base with a 133 ± 4 nm diameter, and a 170 ± 10 nm high nano-rim with a 14 ± 3 nm sidewall rim-thickness. The plasmonic optical response is assessed with FDTD-modeling and reveals that the highest field enhancement is at the top of the hollow nanopillar rim. The modeled field enhancement factor (EF) is compared to the experimental analytical field enhancement factor, which shows to pair up with ca. 103 < EF < 104 and ca. 103 < EF < 105 for excitation wavelengths of 633 and 785 nm. From a broader perspective, our results can stimulate the use of Au-HNPs in the fields of plasmonic sensors and spectroscopy.

Chemically anisotropic single-crystalline silicon nanotetrahedra.

We describe a method based on silicon micromachining to machine single-crystalline silicon nanoparticles bounded by (111) faces in the form of tetrahedra. The technology allows the fabrication of tetrahedra in a size range from 20 to 1000 nm side length, and gives the possibility to chemically modify sites (faces, edges and/or tips) within certain limits. The chemical modification is anticipated to facilitate the self-assembly into new supermaterials such as photonic crystals in the diamond lattice.

Transition flow through an ultra-thin nanosieve.

The fabrication and gas flow characterization of an ultra-thin inorganic nanosieve structured by interference lithography and a bond-micromachining approach are reported. The nanosieve has been observed to exhibit transition gas flow behaviour around atmospheric pressure and ambient temperature. The small lip thickness (45 nm) of the nanopores with respect to their diameter (120 nm) helps in understanding pure transition flow by minimizing interactions between the molecule and inner pore wall. Due to the absence of these collisions, the transition flux is the superimposition of viscous and molecular fluxes without the need for higher-order slip correction. The nanosieve shows a flow selectivity of 3.1 between helium and argon at 20 mbar.

Effects of electrode geometry and combination on nerve fibre selectivity in spinal cord stimulation.

The differential effects of the geometry of a rostrocaudal array of electrode contacts on dorsal column fibre and dorsal root fibre activation in spinal cord stimulation are analysed theoretically. 3-D models of the mid-cervical and mid-thoracic vertebral areas are used for the computation of stimulation induced field potentials, whereas a cable model of myelinated nerve fibre is used for the calculation of the excitation thresholds of large dorsal column and dorsal root fibres. The size and spacing of 2-D rectangular electrode contacts are varied while mono-, bi- and tripolar stimulation are applied. The model predicts that the highest preferential stimulation of dorsal root fibres is obtained in monopolar stimulation with a large cathode, whereas dorsal column fibre preference is highest in tripolar stimulation with small contacts and small contact spacings. Fibre type preference is most sensitive to variations of rostrocaudal contact size and least sensitive to variations of lateral contact size. Dorsal root fibre preference is increased and sensitivity to lead geometry is reduced as the distance from contacts to spinal cord is increased.

Filling of charged cylindrical capillaries.

We provide an analytical model to describe the filling dynamics of horizontal cylindrical capillaries having charged walls. The presence of surface charge leads to two distinct effects: It leads to a retarding electrical force on the liquid column and also causes a reduced viscous drag force because of decreased velocity gradients at the wall. Both these effects essentially stem from the spontaneous formation of an electric double layer (EDL) and the resulting streaming potential caused by the net capillary-flow-driven advection of ionic species within the EDL. Our results demonstrate that filling of charged capillaries also exhibits the well-known linear and Washburn regimes witnessed for uncharged capillaries, although the filling rate is always lower than that of the uncharged capillary. We attribute this to a competitive success of the lowering of the driving forces (because of electroviscous effects), in comparison to the effect of weaker drag forces. We further reveal that the time at which the transition between the linear and the Washburn regime occurs may become significantly altered with the introduction of surface charges, thereby altering the resultant capillary dynamics in a rather intricate manner.

Wafer-scale thin encapsulated two-dimensional nanochannels and its application toward visualization of single molecules.

We present a new and simple approach to fabricate wafer-scale, thin encapsulated, two-dimensional nanochannels by using conventional surface-micromachining technology and thin-film evaporation. The key steps to the realization of two-dimensional nanochannels are a fine etching of a sacrificial layer to create underetching spaces at the nanometer regime, and an accurate thin-film evaporation for encapsulation. Well-defined cross-sectional, encapsulated nanochannel arrays with dimensions as small as 20 nm in both width and height have been realized at the wafer-scale. The fabricated nanochannels with a channel length of 10mm have been used as a suitable fluidic platform for confining a solution containing nanomolar concentrations of Alexa fluorescent molecules. Initial results toward visualization of single Alexa molecules in the confined solution are reported.

Formation of liquid menisci in flexible nanochannels.

In this paper we analyze the characteristic shape of the liquid meniscus at the fluid air interface in nanochannels of less than 80 nm height capped by a flexible membrane. Because of the induced negative pressure difference between the liquid pressure and the pressure outside, the 0.18 microm thin membrane on top of the channels bends downward. This elastocapillary equilibrium between the surface tension of the wetting liquid and the mechanical forces in the capillary results in a very peculiar shape of the interfacial meniscus, visible from the top through the transparent membrane. For increasing deflection of the membrane, the meniscus is seen to protrude along the channel and its curvature changes from concave to convex in the center. We present an analytical model to describe the meniscus shape in the deformed channel for small membrane deflections. We also show that the protrusion length of the meniscus, which can be measured easily, is an accurate and useful indicator for the membrane deflection. Experimental results on nanochannels filled with ethanol and water are presented and the observed menisci are seen to be in good agreement with the proposed model.

Nanofluidic bubble pump using surface tension directed gas injection.

A new concept for liquid manipulation has been developed and implemented in surface-micromachined fluid channels. It is based on the surface tension directed injection of a gas into the liquid flow through micrometer-sized holes in the microchannel wall. The injected gas is directed to an exhaust by a cross-sectional asymmetry of the microchannel and thereby moves minute liquid volumes. Successful pumping experiments were performed with single stroke volumes of tens of picoliters at frequencies around 1 Hz. The minimum actuation pressure is 0.6 bar for a 2-microm channel height, in accordance with theoretical predictions.