RESUMO
In recent years, ternary transition metal oxides (TTMOs), especially spinel type TTMOs have attracted widespread attention as promising candidates for electrode materials. Among all of the popular TTMOs, MgCo2 O4 is an outstanding one, owing to its superior theoretical capacitance. In this work, MgCo2 O4 nanosheet arrays (NSAs) grown directly on nickel foams were fabricated through a facile hydrothermal process at 120 °C for 4â h. With a series of structural and morphological characterization techniques, it was found that the ethanol played a key role in controlling the composition and morphology during the synthesis process. The MgCo2 O4 NSAs exhibited a superior specific capacitance of 853.06â C g-1 (at 1â mA cm-2 ) and enhanced cycling performance, with 94.65 % of initial capacitance retained after 3000â cycles when used as a binder-free integrated electrode for electrochemical supercapacitors; much higher than other reported data for MgCo2 O4 as well. The excellent electrochemical properties mainly came from the unique morphology of the MgCo2 O4 NSAs. This study will demonstrate the applications of MgCo2 O4 NSAs based large-scale supercapacitors grown on low-cost nickel foams.
RESUMO
The low-temperature oxidation spontaneous combustion of coal was caused by the active groups in its structure. The oxidation mechanism of carbon and oxygen functional groups in coal had been extensively studied, but there were few reports on the study of sulfur functional groups initiating the coal spontaneous combustion. To investigate the influence of organic sulfur functional groups on the spontaneous combustion of high-sulfur coal and explore its transformation characteristics, the low-temperature oxidation experimental system was used to study the spontaneous combustion tendency of coal with similar metamorphic degrees and different organic sulfur contents. The variations of element forms and organic sulfur functional groups were analyzed by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy during low-temperature oxidation of coal and model compounds. The results showed that the forms of organic sulfur in coal mainly included mercaptans, thioethers, thiophenes, sulfones (sulfoxides), and sulfates, and the low-temperature oxidation of coal was not only related to the content of organic sulfur but also related to its type. The coal samples, which possess a low content of total sulfur and a small proportion of active organic sulfur groups such as mercaptans and thioethers, had a lower concentration of indicator gas and a smaller tendency to coal spontaneous combustion. After low-temperature oxidation, the content of mercaptan, thioether, thiophene, methyl(methylene), and pyridine in coal decreased, and the content of oxygen-containing groups such as sulfone (sulfoxide), sulfate, carboxyl, and nitrogen oxide increased. The elements of S, C, and N all changed to a high-valent state. In the oxidation reaction of model compounds, mercaptans were more reactive than thiophenes in the low-temperature region, and the oxidation of thiophene could direct form sulfone (sulfoxide), while the oxidation of mercaptan formed disulfide first. It is speculated that low-valence sulfur migrated to a high-valent state by providing sulfhydryl radicals (â¢SH) and sulfur radicals (C-Sâ¢) combined with active oxygen atoms. After the low-temperature oxidation reaction of model compounds, some organic sulfur existed in the form of aromatic sulfur or sulfur oxides and a small part of sulfur escaped as SO2 and H2S gases in the solid oxidation product.
RESUMO
Addressing the issue of suffocation and casualties caused by a large amount of poisonous CO gas generated after a gas explosion, research involving an experimental system for the removal of CO using a Cu-Mn elimination agent was studied. The influence of O2 concentration, temperature, and CO concentration on the elimination performance of the agent after a gas explosion was studied. The quantitative relationship between the amount of CO eliminated, the elimination rate, the O2 concentration, and temperature was analyzed. Further analysis was completed regarding the influence of O2 concentration, temperature, and CO concentration on the thermal effect in the elimination process. The results showed that the elimination agent had a rapid effect on the removal of CO. When the ratio of CO concentration to O2 concentration was closer to the stoichiometric ratio, the elimination and reaction were more complete, the time to complete elimination was shorter, and the peak temperature was higher. As the temperature increased, the time to reach the elimination limit became longer, the elimination rate decreased, the reaction was slower, and the peak temperature was lower. As the CO concentration increased, it was observed that the higher the peak temperature, the longer it took to reach the peak time. The results of the study provide a theoretical support for the catalytic oxidation of CO using the Cu-Mn eliminator after a coal mine gas explosion.
RESUMO
A graphene-phosphorene composite was prepared by quenching the pressure in a LECO high-temperature and high-pressure hydrothermal reaction device. The results suggest that the graphene-phosphorene composite is a layered sandwich structure and shows strong ferromagnetism due to the P-C and P-O-C bonds formed between the graphene and phosphorene.