RESUMO
Melasma is one of the most common pigmented lesions in Chinese women. Although topical therapies are the mainstay treatment, lasers are being used increasingly to treat pigmented lesions. Laser treatment of melasma is however still controversial. This is because lasers have not been able to produce complete clearance of melasma and recurrence rates are high. Laser treatments also cause complications such as hypopigmentation and post-inflammatory hyperpigmentation. In this article, we report on a novel technique using a combination of fractional 2940-nm Er:YAG and 1064-nm Q-switched Nd:YAG lasers. We achieved a rapid improvement in two cases of melasma in Chinese type III skin. The improvement was seen rapidly within a month of treatment. Follow-up at 6 months showed sustained results with no complications. This novel technique is able to safely confer excellent and sustained clearance within a short treatment time.
Assuntos
Lasers de Estado Sólido/uso terapêutico , Terapia com Luz de Baixa Intensidade/métodos , Melanose/radioterapia , Adulto , Povo Asiático , Técnicas Cosméticas , Feminino , Humanos , Pessoa de Meia-IdadeRESUMO
Blepharoplasty with medial epicanthoplasty is popular in Asia. However, known complications include scarring, which can take the form of hypertrophic scars or keloids. Treatments for scars include pressure dressing, silicone gels, retinoic acids, radiotherapy, cryotherapy, triamcinolone injections, and surgical revision. These methods, however, have variable outcomes. Recently, there is an interest in post-surgical scar remodeling with lasers. Although the 1064-nm Q-switched Nd:YAG is primarily a pigment laser, it has recently been shown to be effective for treating scars. In the management of post-blepharoepicanthoplasty scarring, this is certainly unheard of. In this paper, we present a novel technique of treating a patient with post-blepharoepicanthoplasty hypertrophic scarring with a low-fluence 1064-nm Q-switched Nd:YAG laser.
Assuntos
Cicatriz Hipertrófica/radioterapia , Lasers de Estado Sólido/uso terapêutico , Terapia com Luz de Baixa Intensidade/métodos , Adulto , Povo Asiático , Técnicas Cosméticas , Feminino , HumanosRESUMO
A photoactivated gas detector operated at room temperature was microfabricated using a simple hydrothermal method. We report that the photoactivated gas detector can detect toluene using a UV illumination of 2 µW/cm². By ultraviolet (UV) illumination, gas detectors sense toluene at room temperature without heating. A significant enhancement of detector sensitivity is achieved because of the high surface-area-to-volume ratio of the morphology of the coral-like ZnO nanorods arrays (NRAs) and the increased number of photo-induced oxygen ions under UV illumination. The corresponding sensitivity (ΔR/R0) of the detector based on coral-like ZnO NRAs is enhanced by approximately 1022% compared to that of thin-film detectors. The proposed detector greatly extends the dynamic range of detection of metal-oxide-based detectors for gas sensing applications. We report the first-ever detection of toluene with a novel coral-like NRAs gas detector at room temperature. A sensing mechanism model is also proposed to explain the sensing responses of gas detectors based on coral-like ZnO NRAs.
RESUMO
BACKGROUND: Small bowel obstruction can occur during pregnancy, which, if missed, can lead to dire consequences for both the mother and foetus. Management of this condition usually requires surgical intervention. However, only a small number of patients are treated conservatively. OBJECTIVE: The objective was to review the literature to determine the feasibility of conservative management for small bowel obstruction. METHODS: A systematic search of the PubMed and Embase databases was performed using the keywords [small bowel obstruction AND pregnancy]. All original articles were then reviewed and included in this review if deemed suitable. CONCLUSION: Conservative management of small bowel obstruction in pregnant women is feasible if the patient is clinically stable and after ruling out bowel ischaemia and closed-loop obstruction.
Assuntos
Tratamento Conservador , Obstrução Intestinal , Feminino , Humanos , Gravidez , Obstrução Intestinal/cirurgia , Intestino Delgado/cirurgiaRESUMO
We present a low-cost method to fabricate large-area polycarbonate AR nanostructures to improve the luminous intensity and image clarity of a commercial 2.0-inch display panel in bright condition. The polycarbonate AR nanostructures were nanoimprinted by the graded-density nanoporous silicon template with nanoparticle-catalyzed etching. The average reflectivity of the AR film in visible wavelength region was reduced from 10.2% to 4.8% in the optimized case. After attaching on the display panel to reduce the light reflection on the substrate, the brightness enhancement and decrease of ambient light reflection were observed. Due to the enhancement of contrast ratio, the quality index of the Lena image test was improved from 0.85 to 0.92 under strong ambient illumination.
RESUMO
A precisely controlled metallic nanomesh was fabricated by using nanosphere lithography to pattern the silver thin film to form hexagonal nanohole arrays with excellent uniformity, high conductivity and good transparency. An Alq(3) based OLED, with the silver nanomesh electrode of high ðll factor of 70.2% demonstrated a considerable luminous efðciency of 4.8 cd/A, which is 60.9% higher than the referenced device with ITO anode. The periodical nanohole array not only increased the transparency but also helped extracting surface plasmonic wave in organic layers. By attaching the microlens array to further extract the trapped light in substrate, the extraction efficiency enhancement of device with nanomesh anode was 73.8% higher than 50.2% of the referenced device with ITO anode. And the overall current efficiency of device with nanomesh anode was 87.7% higher than traditional ITO based device.
Assuntos
Eletrodos , Lentes , Iluminação/instrumentação , Metais/química , Nanotecnologia/instrumentação , Compostos Orgânicos/química , Semicondutores , Desenho de Equipamento , Análise de Falha de Equipamento , MiniaturizaçãoRESUMO
This paper presents the development of tactile sensors using the sol-gel process to deposit a PZT thin-film from 250 nm to 1 µm on a flexible stainless steel substrate. The PZT thin-film tactile sensor can be used to measure human pulses from several areas, including carotid, brachial, finger, ankle, radial artery, and the apical region. Flexible PZT tactile sensors can overcome the diverse topology of various human regions and sense the corresponding signals from human bodies. The measured arterial pulse waveform can be used to diagnose hypertension and cardiac failure in patients. The proposed sensors have several advantages, such as flexibility, reliability, high strain, low cost, simple fabrication, and low temperature processing. The PZT thin-film deposition process includes a pyrolysis process at 150 °C/500 °C for 10/5 min, followed by an annealing process at 650 °C for 10 min. Finally, the consistent pulse wave velocity (PWV) was demonstrated based on human pulse measurements from apical to radial, brachial to radial, and radial to ankle. It is characterized that the sensitivity of our PZT-based tactile sensor was approximately 0.798 mV/g.
Assuntos
Tecnologia Biomédica/instrumentação , Chumbo/química , Monitorização Fisiológica/instrumentação , Titânio/química , Tato/fisiologia , Zircônio/química , Cristalização , Diástole/fisiologia , Eletricidade , Humanos , Maleabilidade , Polivinil/química , Pulso Arterial , Análise de Onda de Pulso , Silício/química , Aço Inoxidável/química , Sístole/fisiologiaRESUMO
In this work, deionized (DI) water dissociation was used to treat and change the contact angle of the surface of stainless steel substrates followed by the spin coating of P(VDF-TrFE) material for the fabrication of tactile sensors. The contact angle of the stainless steel surface decreased 14° at -30 V treatment; thus, the adhesion strength between the P(VDF-TrFE) thin film and the stainless steel substrate increased by 90%. Although the adhesion strength was increased at negative voltage treatment, it is observed that the crystallinity value of the P(VDF-TrFE) thin film declined to 37% at -60 V. In addition, the remanent polarization value of the P(VDF-TrFE) thin film declined from 5.6 mC/cm2 to 4.61 mC/cm2 for treatment voltages between -5 V and -60 V. A maximum value of approximately 1000 KV/cm of the coercive field value was obtained with the treatment at -15 V. The d33 value was approximately -10.7 pC/N for the substrate treated at 0 V and reached a minimum of -5 pC/N for treatment at -60 V. By using the P(VDF-TrFE) thin-film as the sensing material for tactile sensors, human pulse measurements were obtained from areas including the carotid, brachial, ankle, radial artery, and apical regions. In addition, the tactile sensor is suitable for monitoring the Cun, Guan, and Chi acupoints located at the radial artery region in Traditional Chinese Medicine (TCM). Waveform measurements of the Cun, Guan, and Chi acupoints are crucial because, in TCM, the various waveforms provided information regarding the health conditions of organs.
Assuntos
Monitorização Fisiológica/instrumentação , Polivinil/química , Processamento de Sinais Assistido por Computador/instrumentação , Aço Inoxidável/química , Desenho de Equipamento , Frequência Cardíaca/fisiologia , Humanos , Pulso Arterial/instrumentação , ÁguaRESUMO
In this study, electron beam lithography, rather than the most popular method, chemical synthesis, is used to construct periodical TiO(2) nanowires for a gas sensor with both robust and rapid performance. The effects of temperature on the sensing response and reaction time are analyzed at various operation temperatures ranging from 200 to 350 °C. At the optimized temperature of 300 °C, the proposed sensor repeatedly obtained a rise/recovery time (ΔR: 0.9 R(0) to 0.1 R(0)) of 3.2/17.5 s and a corresponding sensor response (ΔR/R(0)) of 21.7% at an ethanol injection mass quantity of 0.2 µg.
RESUMO
The authors demonstrated an efficient color conversion layer (CCL) by using nanosphere arrays in down-converted white organic light-emitting diodes (WOLEDs). The introduced periodical nanospheres not only helped extract the confined light in devices, but also increased the effective light path to achieve high-efficiency color conversion. By applying a CCL with red phosphor on a 400-nm-period nanosphere array, we achieved 137% color conversion ratio for blue OLEDs, which was 2.68 times higher than conventional flat CCL. The resulting luminous efficiency of WOLEDs with patterned CCLs (20.97 cd/A, 1000 cd/m2) was two times higher than the efficiency of the flat device (10.26 cd/A, 1000 cd/m2).
Assuntos
Cor , Iluminação/instrumentação , Nanosferas/química , Nanosferas/ultraestrutura , Nanotecnologia/instrumentação , Semicondutores , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Colorectal cancer (CRC) continues to be one of the most malignant cancers with a high mortality rate to date. Promoting the radio-responsiveness of CRC is of great importance for local control and prognosis. In this study, we examined the roles of exosomal microRNA-19b (miR-19b) in CRC radioresistance. The regulatory role of miR-19b in CRC stem cells and radiotherapy-resistant cells was determined using miRNA microarray analysis, and its prognostic value was probed using the TCGA database. It was found that miR-19b was overexpressed in CRC tissues, which indicated a poor prognosis. CRC-derived exosomes (EXOs) enhanced the radio-resistance and stemness properties of CRC cells via delivery of miR-19b in vitro and in vivo. FBXW7 was identified as a putative target of miR-19b. On the contrary, reintroduction of FBXW7 reversed the effects of miR-19b on radioresistance and stemness properties. Furthermore, the Wnt/ß-catenin pathway activity was elevated in CRC cells upon EXOs treatment, decreased after miR-19b downregulation, and increased again after FBXW7 downregulation. These results suggest that miR-19b inhibition could enhance the efficacy of radiotherapy while reducing the stemness properties, thus presenting a promising strategy for sensitizing CRC cells to radiotherapy.
Assuntos
Neoplasias Colorretais/patologia , Neoplasias Colorretais/radioterapia , Exossomos , Proteína 7 com Repetições F-Box-WD/fisiologia , MicroRNAs/fisiologia , Células-Tronco Neoplásicas , Tolerância a Radiação , Humanos , Células Tumorais CultivadasRESUMO
GaInP/GaAs/Ge triple-junction concentrator solar cells with significant efficiency enhancement were demonstrated with antireflective ZnO nanoneedles. The novel nanostructure was attained with a Zn(NO3)2-based solution containing vitamin C. Under one sun AM 1.5G solar spectrum, conversion efficiency of the triple-junction device was improved by 23.7% via broadband improvement in short-circuit currents of 3 sub-cells after the coverage by the nanoneedles with a graded refractive index profile. The efficiency enhancement further went up to 45.8% at 100 suns. The performance boost through the nanoneedles also became increasingly pronounced in the conditions of high incident angles and the cloudy weather, e.g. 220.0% of efficiency enhancement was observed at the incident angle of 60°. These results were attributed to the exceptional broadband omnidirectionality of the antireflective nanoneedles.
RESUMO
The fabrication, assembly, and initial testing of a hybrid microfabricated gas chromatograph (microGC) is described. The microGC incorporates capabilities for on-board calibration, sample preconcentration and focused thermal desorption, temperature-programmed separations, and "spectral" detection with an integrated array of microsensors, and is designed for rapid determinations of complex mixtures of environmental contaminants at trace concentrations. Ambient air is used as the carrier gas to avoid the need for on-board gas supplies. The microsystem is plumbed through an etched-Si/glass microfluidic interconnection substrate with fused silica capillaries and employs a miniature commercial pump and valve subsystem for directing sample flow. The latest performance data on each system component are presented followed by first analytical results from the working microsystem. Tradeoffs in system performance as a function of volumetric flow rate are explored. The determination of an 11-vapor mixture of typical indoor air contaminants in less than 90 s is demonstrated with projected detection limits in the low part-per-billion concentration range for a preconcentrated air-sample volume of 0.25 L.
Assuntos
Cromatografia Gasosa/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Ar , Poluentes Atmosféricos/análise , Calibragem , Cromatografia , Cromatografia Gasosa/métodos , Eletroforese Capilar/métodos , Monitoramento Ambiental/métodos , Vidro , Temperatura Alta , Técnicas Analíticas Microfluídicas/métodos , Silício/química , Temperatura , Fatores de TempoRESUMO
An electrokinetic trapping (EKT)-based nanofluidic preconcentration device with the capability of label-free monitoring trapped biomolecules through real-time dual-loop electric current measurement was demonstrated. Universal current-voltage (I-V) curves of EKT-based preconcentration devices, consisting of two microchannels connected by ion-selective channels, are presented for functional validation and optimal operation; universal onset current curves indicating the appearance of the EKT mechanism serve as a confirmation of the concentrating action. The EKT mechanism and the dissimilarity in the current curves related to the volume flow rate (Q), diffusion coefficient (D), and diffusion layer (DL) thickness were explained by a control volume model with a five-stage preconcentration process. Different behaviors of the trapped molecular plug were categorized based on four modes associated with different degrees of electroosmotic instability (EOI). A label-free approach to preconcentrating (bio)molecules and monitoring the multibehavior molecular plug was demonstrated through real-time electric current monitoring, rather than through the use of microscope images.
Assuntos
Técnicas Eletroquímicas/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Nanotecnologia/instrumentação , Eletricidade , Desenho de EquipamentoRESUMO
This paper compares the selectivity and discusses the response mechanisms of various surface-modified, single-walled carbon nanotube (SWCNT)-coated sensor arrays for the detection of volatile organic compounds (VOCs). Two types of sensor platforms, chemiresistor and quartz crystal microbalance (QCM), were used to probe the resistance changes and absorption masses during vapor sensing. Four sensing materials were used in this comparison study: pristine, acidified, esterified, and surfactant (sodium dodecyl sulfate, SDS)-coated SWCNTs. SWCNT-coated QCMs reached the response equilibrium faster than the chemiresistors did, which revealed a delay diffusion behavior at the inter-tube junction. In addition, the calibration lines for QCMs were all linear, but the chemiresistors showed curvature calibration lines which indicated less effectiveness of swelling at high concentrations. While the sorption of vapor molecules caused an increase in the resistance for most SWCNTs due to the swelling, the acidified SWCNTs showed no responses to nonpolar vapors and a negative response to hydrogen bond acceptors. This discovery provided insight into the inter-tube interlocks and conductivity modulation of acidified SWCNTs via a hydrogen bond. The results in this study provide a stepping-stone for further understanding of the mechanisms behind the vapor selectivity of surface-modified SWCNT sensor arrays.
Assuntos
Fulerenos/química , Gases/análise , Nanotubos de Carbono/química , Técnicas de Microbalança de Cristal de Quartzo/métodos , Tensoativos/química , Compostos Orgânicos Voláteis/análise , Ácidos/química , Calibragem , Éteres/química , Ligação de HidrogênioRESUMO
We report the design, fabrication, and evaluation of a µ-preconcentrator chip that utilizes an array of solid-phase microextraction (SPME) needles coated with in-situ-grown carbon adsorbent film. The structure of the SPME needle (diameter=100 µm, height=250 µm) array inside the sampling chamber was fabricated using a deep reactive-ion etching (DRIE) process to enhance the attachable surface area for adsorbent film. Heaters and temperature sensors were fabricated onto the back of a µ-preconcentrator chip using lithography patterning and a metal lift-off process. The devices were sealed by anodic bonding and diced prior to the application of the adsorbent film. An adsorbent precursor, cellulose was dissolved in water and dynamically coated onto the SPME needle array. The coated cellulose film was converted into a porous carbon film via pyrolysis at 600 °C in a N(2) atmosphere. The surface area of the carbon adsorbent film was 308 m(2)/g, which is higher than that of a commercial adsorbent Carbopack X. A preconcentration factor as high as 13,637-fold was demonstrated using toluene. Eleven volatile organic compounds (VOCs) of different volatilities and functional groups were sampled and analyzed by GC-FID, and the desorption peak widths at half height were all less than 2.6 s after elution from a 15m capillary GC column. There was no sign of performance degradation after continuous operation for 50 cycles in air.