Asymmetric Intramolecular Amination Catalyzed with Cp*Ir-SPDO via Nitrene Transfer for Synthesis of Spiro-Quaternary Indolinone.

An asymmetric intramolecular spiro-amination to high steric hindering α-C-H bond of 1,3-dicarbonyl via nitrene transfer using inactive aryl azides has been carried out by developing a novel Cp*Ir(III)-SPDO (spiro-pyrrolidine oxazoline) catalyst, thereby enabling the first successful construction of structurally rigid spiro-quaternary indolinone cores with moderate to high yields and excellent enantioselectivities. DFT computations support the presence of double bridging H-F bonds between [SbF6]- and both the ligand and substrate, which favors the plane-differentiation of the enol π-bond for nitrenoid attacking. These findings open up numerous opportunities for the development of new asymmetric nitrene transfer systems.

CO Oxidation Promoted by NO Adsorption on RhMn2O3- Cluster Anions.

CO oxidation represents an important model reaction in the gas phase to provide a clear structure-reactivity relationship in related heterogeneous catalysis. Herein, in combination with mass spectrometry experiments and quantum-chemical calculations, we identified that the RhMn2O3- cluster cannot oxidize CO into gas-phase CO2 at room temperature, while the NO preadsorbed products RhMn2O3-[(NO)1,2] are highly reactive in CO oxidation. This discovery is helpful to get a fundamental understanding on the reaction behavior in real-world three-way catalytic conditions where different kinds of reactants coexist. Theoretical calculations were performed to rationalize the crucial roles of preadsorbed NO where the strongly attached NO on the Rh atom can greatly stabilize the products RhMn2O2-[(NO)1,2] during CO oxidation and at the same time works together with the Rh atom to store electrons that stay originally in the attached CO2- unit. The leading result is that the desorption of CO2, which is the rate-determining step of CO oxidation by RhMn2O3-, can be greatly facilitated on the reactions of RhMn2O3-[(NO)1,2] with CO.

A novel small-molecule PCSK9 inhibitor E28362 ameliorates hyperlipidemia and atherosclerosis.

Proprotein convertase subtilisin/kexin type 9 (PCSK9) binds to the epidermal growth factor precursor homologous domain A (EGF-A) of low-density lipoprotein receptor (LDLR) in the liver and triggers the degradation of LDLR via the lysosomal pathway, consequently leading to an elevation in plasma LDL-C levels. Inhibiting PCSK9 prolongs the lifespan of LDLR and maintains cholesterol homeostasis in the body. Thus, PCSK9 is an innovative pharmacological target for treating hypercholesterolemia and atherosclerosis. In this study, we discovered that E28362 was a novel small-molecule PCSK9 inhibitor by conducting a virtual screening of a library containing 40,000 compounds. E28362 (5, 10, 20 µM) dose-dependently increased the protein levels of LDLR in both total protein and the membrane fraction in both HepG2 and AML12 cells, and enhanced the uptake of DiI-LDL in AML12 cells. MTT assay showed that E28362 up to 80 µM had no obvious toxicity in HepG2, AML12, and HEK293a cells. The effects of E28362 on hyperlipidemia and atherosclerosis were evaluated in three different animal models. In high-fat diet-fed golden hamsters, administration of E28362 (6.7, 20, 60 mg·kg-1·d-1, i.g.) for 4 weeks significantly reduced plasma total cholesterol (TC), triglyceride (TG), low-density lipoprotein-cholesterol (LDL-C) and PCSK9 levels, and reduced liver TC and TG contents. In Western diet-fed ApoE-/- mice (20, 60 mg·kg-1·d-1, i.g.) and human PCSK9 D374Y overexpression mice (60 mg·kg-1·d-1, i.g.), administration of E28362 for 12 weeks significantly decreased plasma LDL-C levels and the area of atherosclerotic lesions in en face aortas and aortic roots. Moreover, E28362 significantly increased the protein expression level of LDLR in the liver. We revealed that E28362 selectively bound to PCSK9 in HepG2 and AML12 cells, blocked the interaction between LDLR and PCSK9, and induced the degradation of PCSK9 through the ubiquitin-proteasome pathway, which finally resulted in increased LDLR protein levels. In conclusion, E28362 can block the interaction between PCSK9 and LDLR, induce the degradation of PCSK9, increase LDLR protein levels, and alleviate hyperlipidemia and atherosclerosis in three distinct animal models, suggesting that E28362 is a promising lead compound for the treatment of hyperlipidemia and atherosclerosis.

Temporal gene expression profiling during early-stage traumatic temporomandibular joint bony ankylosis in a sheep model.

BACKGROUND: Investigating the molecular biology underpinning the early-stage of traumatic temporomandibular joint (TMJ) ankylosis is crucial for discovering new ways to prevent the disease. This study aimed to explore the dynamic changes of transcriptome from the intra-articular hematoma or the newly generated ankylosed callus during the onset and early progression of TMJ ankylosis. METHODS: Based on a well-established sheep model of TMJ bony ankylosis, the genome-wide microarray data were obtained from samples at postoperative Days 1, 4, 7, 9, 11, 14 and 28, with intra-articular hematoma at Day 1 serving as controls. Fold changes in gene expression values were measured, and genes were identified via clustering based on time series analysis and further categorised into three major temporal classes: increased, variable and decreased expression groups. The genes in these three temporal groups were further analysed to reveal pathways and establish their biological significance. RESULTS: Osteoblastic and angiogenetic genes were found to be significantly expressed in the increased expression group. Genes linked to inflammation and osteoclasts were found in the decreased expression group. The various biological processes and pathways related to each temporal expression group were identified, and the increased expression group comprised genes exclusively involved in the following pathways: Hippo signaling pathway, Wnt signaling pathway and Rap 1 signaling pathway. The decreased expression group comprised genes exclusively involved in immune-related pathways and osteoclast differentiation. The variable expression group consisted of genes associated with DNA replication, DNA repair and DNA recombination. Significant biological pathways and transcription factors expressed at each time point postoperatively were also identified. CONCLUSIONS: These data, for the first time, presented the temporal gene expression profiling and reveal the important process of molecular biology in the early-stage of traumatic TMJ bony ankylosis. The findings might contributed to identifying potential targets for the treatment of TMJ ankylosis.

An Axially Chiral Styrene-Phosphine Ligand for Pd-Catalyzed Asymmetric N-Alkylation of Indoles.

An efficient palladium-catalyzed enantioselective direct N-alkylation of indoles using a novel type of axially chiral styrene-phosphine ligand SJTU-PHOS-1 was developed. This reaction demonstrated good functional group compatibility and a wide range scope of substrates in mild conditions. Moreover, the DFT calculations expounded the coordination mode of the metal catalyst and the axially chiral styrene-phosphine ligand in the enantioselectivity control.

Moldavica acid A, a new salicylic acid derivative from Dracocephalum moldavica.

In this paper, we present the discovery of a novel salicylic acid derivative, moldavica acid A (1), and a new natural dibenzo[b,f]oxepin, moldavica acid B (2), together with four known phenylpropionic acids (3-6) and protocatechuic acid (7) that were isolated from Dracocephalum moldavica L. Their structures were elucidated by comprehensive spectroscopic methods, including infrared and nuclear magnetic resonance. Compound 1 is the first example of salicylic acid linking a carboxylated α-pyrone via an ethyl bridge. Beyond expanding the knowledge of the chemical diversity of D. moldavica, both compounds 1 and 2 were shown to upregulate the expression of Kruppel-like factor 2, which could serve as a prospective therapeutic target for the treatment of atherosclerosis.

Dimensional changes of complete dentures fabricated by milled and printed techniques: An in vitro study.

STATEMENT OF PROBLEM: Information on the dimensional changes in maxillary and mandibular dentures made by using computer-aided design and computer-aided manufacturing (CAD-CAM) techniques under uniform testing conditions is lacking. PURPOSE: The purpose of this in vitro study was to evaluate the dimensional changes and reproducibility of maxillary and mandibular dentures by using CAD-CAM-milled and 3D-printed techniques. MATERIAL AND METHODS: Maxillary and mandibular edentulous models with wax occlusal rims were scanned, and dentures were designed by using a CAD software program and fabricated by using 2 techniques and materials: CAD-CAM-milled (CCM) and 3D-printed (3DP). The 3DP fabrications included 4 subgroups: dentures printed with a 90-degree build angle with UV light polymerization on the reference model (3DP 90M), dentures printed with a 90-degree build angle and light polymerization without the reference model (3DP 90), dentures printed with a 45-degree build angle with light polymerization on the reference model (3DP 45M), and dentures printed with a 45-degree build angle and light polymerization without the reference model (3DP 45). The preprocessing and postprocessing scan files of each denture produced by CCM and 3DP were superimposed by using a surface matching software program. Ten points each on maxillary and mandibular dentures were measured for deviations after processing. Additionally, for each denture, the widths were measured between the canines and molars, the anteroposterior plane from cusp tips between the canines and molars, and the vertical plane from the cusp tip of the canines to the marginal gingiva. They were then compared with those in the denture design CAD cast. The Kruskal-Wallis analysis of variance test was used for statistical analyses (α=.05). RESULTS: According to digital superimposition, CCM had the smallest values of deviation with no statistical difference (P>.05), indicating more uniform results from measurement points in both maxillary and mandibular dentures, followed by 3DP 90M, 3DP 90, 3DP 45M, and 3DP 45. Regarding the width measurements, CCM had the smallest values of deviation (P<.05). In 3DP, smaller deviation values were observed at the vertical plane from the tip of the canine to the marginal gingiva, and larger values were observed in the intermolar width (P<.05). CONCLUSIONS: CCM exhibited smaller dimensional changes and better reproducibility among the tested techniques. In 3DP, the build angle and methods of light postprocessing influenced the dimensional stability. The 90-degree build angle with additional light polymerization on the cast improved the dimensional deviations.

Cerium Synchronous Doping in Anatase for Enhanced Photocatalytic Hydrogen Production from Ethanol-Water Mixtures.

Cerium element with a unique electric structure can be used to modify semiconductor photocatalysts to enhance their photocatalytic performances. In this work, Ce-doped TiO2 (Ce/TiO2) was successfully achieved using the sol-gel method. The structural characterization methods confirm that Ce was doped in the lattice of anatase TiO2, which led to a smaller grain size. The performance test results show that the Ce doped in anatase TiO2 significantly enhances the charge transport efficiency and broadens the light absorption range, resulting in higher photocatalytic performance. The Ce/TiO2 exhibited a photocurrent density of 10.9 µA/cm2 at 1.0 V vs. Ag/AgCl, 2.5 times higher than that of pure TiO2 (4.3 µA/cm2) under AM 1.5 G light. The hydrogen (H2) production rate of the Ce/TiO2 was approximately 0.33 µmol/h/g, which is more than twice as much as that of the pure anatase TiO2 (0.12 µmol/h/g). This work demonstrates the effect of Ce doping in the lattice of TiO2 for enhanced photocatalytic hydrogen production.

Asymmetric Intramolecular Hydroalkylation of Internal Olefin with Cycloalkanone to Directly Access Polycyclic Systems.

An asymmetric intramolecular hydroalkylation of unactivated internal olefins with tethered cyclic ketones was realized by the cooperative catalysis of a newly designed chiral amine (SPD-NH2 ) and PdII complex, providing straightforward access to either bridged or fused bicyclic systems containing three stereogenic centers with excellent enantioselectivity (up to 99 % ee) and diastereoselectivity (up to >20 : 1 dr). Notably, the bicyclic products could be conveniently transformed into a diverse range of key structures frequently found in bioactive terpenes, such as Δ6 -protoilludene, cracroson D, and vulgarisins. The steric hindrance between the Ar group of the SPD-NH2 catalyst and the branched chain of the substrate, hydrogen-bonding interactions between the N-H of the enamine motif and the C=O of the directing group MQ, and the counterion of the PdII complex were identified as key factors for excellent stereoinduction in this dual catalytic process by density functional theory calculations.

Identification and Characterization of the Biosynthetic Pathway of the Sulfonolipid Capnine.

Capnine (2-amino-3-hydroxy-15-methylhexadecane-1-sulfonate) and capnoids (N-fatty acylated capnine derivatives) are sulfonolipids present in the outer membrane of gliding bacteria in the phylum Bacteroidetes and play a role in their unique gliding motility. They are structurally similar to sphingolipids and are thought to be biosynthesized via a similar pathway. Here we report the identification and biochemical characterization of the capnine biosynthetic enzymes cysteate synthase (CapA) and cysteate-C-fatty acyltransferase (CapB) from the pathogenic gliding bacterium Capnocytophaga ochracea and NAD(P)H-dependent dehydrocapnine reductase CapC from the avian pathogen Ornithobacterium rhinotracheale. CapA catalyzes the formation of cysteate from O-phospho-l-serine and sulfite, and CapB catalyzes the formation of dehydrocapnine from cysteate and 13-methyl-myristoyl-CoA, followed by reduction by CapC. CapA is closely related to cystathionine-ß-synthase but distantly related to the archaeal cysteate synthase. Close homologues of CapA, CapB, and the CapA isozyme archaeal cysteate synthase are present in many Bacteroidetes bacteria, including environmental, pathogenic, and human oral and intestinal microbiome bacteria, suggesting the widespread ability of these bacteria to biosynthesize capnine and related sulfonolipids.

Chiral Selenide/Achiral Sulfonic Acid Cocatalyzed Atroposelective Sulfenylation of Biaryl Phenols via a Desymmetrization/Kinetic Resolution Sequence.

Enantioselective synthesis of axially chiral sulfur-containing biaryl derivatives through the electrophilic sulfenylation of biaryl phenols has been achieved for the first time. This catalytic asymmetric system, which involves sequential desymmetrization and kinetic resolution, is enabled by a combination of a novel 3,3'-disubstituted BINOL-derived selenide catalyst and an achiral sulfonic acid. Control experiments and computational studies suggest that multiple noncovalent interactions between the cocatalysts and substrate, especially a network of hydrogen bond interactions, play a crucial role in determining the enantioselectivity and reactivity.

Facile CO bond cleavage on polynuclear vanadium nitride clusters V4N5.

Identifying the structural configurations of precursors for CO dissociation is fundamentally interesting and industrially important in the fields of, e.g., Fischer-Tropsch synthesis. Herein, we demonstrated that CO could be dissociated on polynuclear vanadium nitride V4N5- clusters at room temperature, and a key intermediate, with CO in a N-assisted tilted bridge coordination where the C-O bond ruptures easily, was discovered. The reaction was characterized by mass spectrometry, photoelectron spectroscopy, and quantum-chemistry calculations, and the nature of the adsorbed CO on product V4N5CO- was further characterized by a collision-induced dissociation experiment. Theoretical analysis evidences that CO dissociation is predominantly governed by the low-coordinated V and N atoms on the (V3N4)VN- cluster and the V3N4 moiety resembles a support. This finding strongly suggests that a novel mode for facile CO dissociation was identified in a gas-phase cluster study.

Water-Gas Shift Catalyzed by Iridium-Vanadium Oxide Clusters IrVO2- with Iridium in a Rare Oxidation State of -II.

The discovery of compounds containing transition metals with an unusual and well-established oxidation state is vital to enrich our horizon on formal oxidation state. Herein, benefiting from the study of the water-gas shift reaction (CO + H2O → CO2 + H2) mediated with the iridium-vanadium oxide cluster IrVO2-, the missing -II oxidation state of iridium was identified. The reactions were performed by using our newly developed double ion trap reactors that can spatially separate the addition of reactants and are characterized by mass spectrometry and quantum-chemical calculations. This finding makes an important step that all the proposed 13 oxidation states of iridium (+IX to -III) have been known. The iridium atom in the IrVO2- cluster features the Ir═V double bond and resembles chemically the coordinated oxygen atom. A reactivity study demonstrated that the flexible role switch of iridium between an oxygen-atom like (Ir-IIVO2-) and a transition-metal-atom like behavior (Ir+IIVO3-) in different species can drive the water-gas shift reaction in the gas phase under ambient conditions. This result parallels and well rationalizes the extraordinary reactivity of oxide-supported iridium single-atom catalysts in related condensed-phase reactions.

Effect of butyrate, a bacterial by-product, on the viability and ICAM-1 expression/production of human vascular endothelial cells: Role in infectious pulpal/periapical diseases.

AIM: To investigate the effects of butyric acid (BA), a metabolic product generated by pulp and root canal pathogens, on the viability and intercellular adhesion molecule-1 (ICAM-1) production of endothelial cells, which are crucial to angiogenesis and pulpal/periapical wound healing. METHODOLOGY: Endothelial cells were exposed to butyrate with/without inhibitors. Cell viability, apoptosis and reactive oxygen species (ROS) were evaluated using an MTT assay, PI/annexin V and DCF fluorescence flow cytometry respectively. RNA and protein expression was determined using a polymerase chain reaction assay and Western blotting or immunofluorescent staining. Soluble ICAM-1 (sICAM-1) was measured using an enzyme-linked immunosorbent assay. The quantitative results were expressed as mean ± standard error (SE) of the mean. The data were analysed using a paired Student's t-test where necessary. A p-value ≤0.05 was considered to indicate a statistically significant difference between groups. RESULTS: Butyrate (>4 mM) inhibited cell viability and induced cellular apoptosis and necrosis. It inhibited cyclin B1 but stimulated p21 and p27 expression. Butyrate stimulated ROS production and hemeoxygenase-1 (HO-1) expression as well as activated the Ac-H3, p-ATM, p-ATR, p-Chk1, p-Chk2, p-p38 and p-Akt expression of endothelial cells. Butyrate stimulated ICAM-1 mRNA/protein expression and significant sICAM-1 production (p < .05). Superoxide dismutase, 5z-7oxozeaenol, SB203580 and compound C (p <  .05), but not ZnPP, CGK733, AZD7762 or LY294002, attenuated butyrate cytotoxicity to endothelial cells. Notably, little effect on butyrate-stimulated sICAM-1 secretion was found. Valproic acid, phenylbutyrate and trichostatin (three histone deacetylase inhibitors) significantly induced sICAM-1 production (p < .05). CONCLUSION: Butyric acid inhibited proliferation, induced apoptosis, stimulated ROS and HO-1 production and increased ICAM-1 mRNA expression and protein synthesis in endothelial cells. Cell viability affected by BA was diminished by some inhibitors; however, the increased sICAM-1 secretion by BA was not affected by any of the tested inhibitors. These results facilitate understanding of the pathogenesis, prevention and treatment of pulpal/periapical diseases.

Cerium-Doped Iron Oxide Nanorod Arrays for Photoelectrochemical Water Splitting.

In this work, a simple one-step hydrothermal method was employed to prepare the Ce-doped Fe2O3 ordered nanorod arrays (CFT). The Ce doping successfully narrowed the band gap of Fe2O3, which improved the visible light absorption performance. In addition, with the help of Ce doping, the recombination of electron/hole pairs was significantly inhibited. The external voltage will make the performance of the Ce-doped sample better. Therefore, the Ce-doped Fe2O3 has reached superior photoelectrochemical (PEC) performance with a high photocurrent density of 1.47 mA/cm2 at 1.6 V vs. RHE (Reversible Hydrogen Electrode), which is 7.3 times higher than that of pristine Fe2O3 nanorod arrays (FT). The Hydrogen (H2) production from PEC water splitting of Fe2O3 was highly improved by Ce doping to achieve an evolution rate of 21 µmol/cm2/h.

Resolution of Excessive Interocclusal Restoration Space Post-Mandibulectomy Using a Two-Layer Retrievable Fixed Implant-Supported Prosthesis: A Case Report.

Patients treated with segmental mandibulectomy often require complicated rehabilitation. Maintenance of mandibular continuity and provision of adequate soft and hard tissue volumes are two key factors required for good clinical outcomes. Moreover, excessive interocclusal restoration space is a common problem in these patients. This case report describes the process of prosthetic rehabilitation from extensive surgical excision to final rehabilitation by using a creative two-layer fixed implant prosthesis in a 70-year-old patient with oral squamous cell carcinoma.

Facile Benzylic Alkylation of Arenes with Alcohols by Catalysis with Spirocyclic NHC IrIII Pincer Complex.

A facile benzylic alkylation of indenes and other arenes was developed from readily available primary and secondary alcohols using our newly investigated CCC pincer IrIII catalyst (SNIr-H). Excellent regioselectivity and yield (89 %) of the C3-alkylated indenes were obtained. Additionally, the challenging sp2 C-alkylation was readily accomplished. This method could be utilized for the synthesis of the analogs of a histamine H1 receptor antagonist and the functional material template molecule, indeno[2,1-a]indene. A hemilabile IrIII -dihydride intermediate was proposed based on control experiments and previous density functional theory (DFT) calculations for the borrowing hydrogen mechanism and is key to the success of this IrIII catalyst in the reduction of unactivated multi-substituted olefin intermediates.

Bioinspired Palladium-Catalyzed Intramolecular C(sp3 )-H Activation for the Collective Synthesis of Proline Natural Products.

Bioinspired palladium-catalyzed intramolecular cyclization of amino acid derivatives containing a vinyl iodide moiety by C-H activation enabled rapid access to a wide range of functionalized proline derivatives with an exocyclic olefin. To demonstrate the practicality of this methodology, the functionalized prolines were used as intermediates for the synthesis of several natural products: lucentamycin A, oxotomaymycin, oxoprothracarcin, and barmumycin.

Effects of low-dose rhBMP-2 on peri-implant ridge augmentation in a canine model.

AIMS: The aim of this study was to investigate the potential of low-dose rhBMP-2 combined with Hydroxyapatite (HAp)/ß-tricalcium phosphate (TCP)/ Collagen (Col) composite in repairing the peri-implant critical size defect and to determine the optimal rhBMP-2 concentration. MATERIALS AND METHODS: Fifty saddle-type alveolar defects (10 mm mesiodistally and 4 mm apicocoronally) were surgically prepared on edentulous ridges in ten beagle dogs. Following implant placement, the defects with vertically exposed implant fixtures either received (a) no graft, (b) HAp/TCP/Col composite, (c) HAp/TCP/Col +0.02 mg/ml rhBMP-2, (d) HAp/TCP/Col +0.08 mg/ml rhBMP-2 or (e) HAp/TCP/Col +0.2 mg/ml rhBMP-2. After healing for 4 or 8 weeks, bone regeneration and mineralization were assessed through radiography, micro-CT, fluorescence labelling and histologic analyses. Implant stability was measured through resonance frequency analysis. RESULTS: It was evident HAp/TCP/Col with 0.2 mg/ml rhBMP-2 manifested strong osteogenic potential in this large animal model, as significantly more and faster new bone formation with better implant stability was identified compared to the HAp/TCP/Col-alone control group (adjusted p < .05). CONCLUSIONS: Our results highlight the constructs of HAp/TCP/Col +0.2 mg/ml rhBMP-2 without barrier membranes as a promising tool for peri-implant ridge augmentation.

Microarray Analysis of Differential Gene Expression Between Traumatic Temporomandibular Joint Fibrous and Bony Ankylosis in a Sheep Model.

BACKGROUND The type of traumatic temporomandibular joint (TMJ) ankylosis depends on the degree of severity of TMJ trauma. Here, we performed comprehensive differential molecular profiling between TMJ fibrous and bony ankylosis. MATERIAL AND METHODS Six sheep were used and a bilateral different degree of TMJ trauma was performed to induce fibrous ankylosis in one side and bony ankylosis in the other side. The ankylosed calluses were harvested at days 14 and 28 postoperatively and analyzed by Affymetrix OviGene-1_0-ST microarrays. DAVID was used to perform the Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analysis for the different expression genes (DEGs). The DEGs were also typed into protein-protein interaction (PPI) networks to get the interaction data. Ten DEGs, including 7 hub genes from PPI analysis, were confirmed by real-time PCR. RESULTS We found 90 and 323 DEGs at least 2-fold at days 14 and 28, respectively. At day 14, bony ankylosis showed upregulated DEGs, such as TLR8, SYK, NFKBIA, PTPRC, CD86, ITGAM, and ITGAL, indicating a stronger immune and inflammatory response and cell adhesion, while genes associated with anti-adhesion (PRG4) and inhibition of osteoblast differentiation (SFRP1) had higher expression in fibrous ankylosis. At day 28, bony ankylosis showed increased biological process related to new bone formation, while fibrous ankylosis was characterized by a prolonged immune and inflammatory reaction. CONCLUSIONS This study provides a differential gene expression profile between TMJ fibrous and bony ankylosis. Further study of these key genes may provide new ideas for future treatment of TMJ bony ankylosis.