Evolving origin-of-transfer sequences on staphylococcal conjugative and mobilizable plasmids-who's mimicking whom?

In Staphylococcus aureus, most multiresistance plasmids lack conjugation or mobilization genes for horizontal transfer. However, most are mobilizable due to carriage of origin-of-transfer (oriT) sequences mimicking those of conjugative plasmids related to pWBG749. pWBG749-family plasmids have diverged to carry five distinct oriT subtypes and non-conjugative plasmids have been identified that contain mimics of each. The relaxasome accessory factor SmpO, encoded by each conjugative plasmid, determines specificity for its cognate oriT. Here we characterized the binding of SmpO proteins to each oriT. SmpO proteins predominantly formed tetramers in solution and bound 5'-GNNNNC-3' sites within each oriT. Four of the five SmpO proteins specifically bound their cognate oriT. An F7K substitution in pWBG749 SmpO switched oriT-binding specificity in vitro. In vivo, the F7K substitution reduced but did not abolish self-transfer of pWBG749. Notably, the substitution broadened the oriT subtypes that were mobilized. Thus, this substitution represents a potential evolutionary intermediate with promiscuous DNA-binding specificity that could facilitate a switch between oriT specificities. Phylogenetic analysis suggests pWBG749-family plasmids have switched oriT specificity more than once during evolution. We hypothesize the convergent evolution of oriT specificity in distinct branches of the pWBG749-family phylogeny reflects indirect selection pressure to mobilize plasmids carrying non-cognate oriT-mimics.

Hierarchical assembly of pH-responsive surfactant-cyclodextrin complexes.

In this work, the inclusion complexes of alkyl ethoxy carboxylates with α-cyclodextrin (αCD) and ß-cyclodextrin (ßCD) were investigated. The thermodynamics of the complexation process was probed by isothermal titration calorimetry (ITC) and volumetry as a function of the degree of ionization of the surfactant. The complexation process was shown to be an enthalpically driven pH-independent process. For both types of cyclodextrins, the complexes were found to spontaneously self-assemble into highly-ordered supramolecular aggregates probed by small-angle neutron scattering and electron and optical microscopy. Herein, we report the formation of thin platelets for nonionized surfactant systems and equally spaced multilayered hollow cylinders for ionized systems in a hierarchical self-assembly process. In addition, the analysis allowed unveiling the effect of the number of ethylene oxides in the surfactants and the CD cavity size on the morphology of the aggregates. Finally, this study also highlights the importance of examining the tuning parameters' influence on the short and long-range interactions involved in the control of the assembly process.

BioStruct-Africa: empowering Africa-based scientists through structural biology knowledge transfer and mentoring - recent advances and future perspectives.

Being able to visualize biology at the molecular level is essential for our understanding of the world. A structural biology approach reveals the molecular basis of disease processes and can guide the design of new drugs as well as aid in the optimization of existing medicines. However, due to the lack of a synchrotron light source, adequate infrastructure, skilled persons and incentives for scientists in addition to limited financial support, the majority of countries across the African continent do not conduct structural biology research. Nevertheless, with technological advances such as robotic protein crystallization and remote data collection capabilities offered by many synchrotron light sources, X-ray crystallography is now potentially accessible to Africa-based scientists. This leap in technology led to the establishment in 2017 of BioStruct-Africa, a non-profit organization (Swedish corporate ID: 802509-6689) whose core aim is capacity building for African students and researchers in the field of structural biology with a focus on prevalent diseases in the African continent. The team is mainly composed of, but not limited to, a group of structural biologists from the African diaspora. The members of BioStruct-Africa have taken up the mantle to serve as a catalyst in order to facilitate the information and technology transfer to those with the greatest desire and need within Africa. BioStruct-Africa achieves this by organizing workshops onsite at our partner universities and institutions based in Africa, followed by post-hoc online mentoring of participants to ensure sustainable capacity building. The workshops provide a theoretical background on protein crystallography, hands-on practical experience in protein crystallization, crystal harvesting and cryo-cooling, live remote data collection on a synchrotron beamline, but most importantly the links to drive further collaboration through research. Capacity building for Africa-based researchers in structural biology is crucial to win the fight against the neglected tropical diseases, e.g. ascariasis, hookworm, trichuriasis, lymphatic filariasis, active trachoma, loiasis, yellow fever, leprosy, rabies, sleeping sickness, onchocerciasis, schistosomiasis, etc., that constitute significant health, social and economic burdens to the continent. BioStruct-Africa aims to build local and national expertise that will have direct benefits for healthcare within the continent.

Conformational changes during pore formation by the perforin-related protein pleurotolysin.

Membrane attack complex/perforin-like (MACPF) proteins comprise the largest superfamily of pore-forming proteins, playing crucial roles in immunity and pathogenesis. Soluble monomers assemble into large transmembrane pores via conformational transitions that remain to be structurally and mechanistically characterised. Here we present an 11 Å resolution cryo-electron microscopy (cryo-EM) structure of the two-part, fungal toxin Pleurotolysin (Ply), together with crystal structures of both components (the lipid binding PlyA protein and the pore-forming MACPF component PlyB). These data reveal a 13-fold pore 80 Å in diameter and 100 Å in height, with each subunit comprised of a PlyB molecule atop a membrane bound dimer of PlyA. The resolution of the EM map, together with biophysical and computational experiments, allowed confident assignment of subdomains in a MACPF pore assembly. The major conformational changes in PlyB are a ∼70° opening of the bent and distorted central ß-sheet of the MACPF domain, accompanied by extrusion and refolding of two α-helical regions into transmembrane ß-hairpins (TMH1 and TMH2). We determined the structures of three different disulphide bond-trapped prepore intermediates. Analysis of these data by molecular modelling and flexible fitting allows us to generate a potential trajectory of ß-sheet unbending. The results suggest that MACPF conformational change is triggered through disruption of the interface between a conserved helix-turn-helix motif and the top of TMH2. Following their release we propose that the transmembrane regions assemble into ß-hairpins via top down zippering of backbone hydrogen bonds to form the membrane-inserted ß-barrel. The intermediate structures of the MACPF domain during refolding into the ß-barrel pore establish a structural paradigm for the transition from soluble monomer to pore, which may be conserved across the whole superfamily. The TMH2 region is critical for the release of both TMH clusters, suggesting why this region is targeted by endogenous inhibitors of MACPF function.

Thermal green protein, an extremely stable, nonaggregating fluorescent protein created by structure-guided surface engineering.

In this article, we describe the engineering and X-ray crystal structure of Thermal Green Protein (TGP), an extremely stable, highly soluble, non-aggregating green fluorescent protein. TGP is a soluble variant of the fluorescent protein eCGP123, which despite being highly stable, has proven to be aggregation-prone. The X-ray crystal structure of eCGP123, also determined within the context of this paper, was used to carry out rational surface engineering to improve its solubility, leading to TGP. The approach involved simultaneously eliminating crystal lattice contacts while increasing the overall negative charge of the protein. Despite intentional disruption of lattice contacts and introduction of high entropy glutamate side chains, TGP crystallized readily in a number of different conditions and the X-ray crystal structure of TGP was determined to 1.9 Å resolution. The structural reasons for the enhanced stability of TGP and eCGP123 are discussed. We demonstrate the utility of using TGP as a fusion partner in various assays and significantly, in amyloid assays in which the standard fluorescent protein, EGFP, is undesirable because of aberrant oligomerization.

Spontaneous redox synthesis and characterization of the tetrathiafulvalene-vanadium-substituted polyoxometalate charge-transfer material TTF4[SVW11O40]: comparison with the Mo analogue.

Both conventional solution-phase and direct solid-solid redox reactions between tetrathiafulvalene (TTF) and the vanadium-substituted polyoxometalate (n-Bu4N)3[SV(V)W11O40] give rise to microcrystalline or powdered semiconducting charge transfer solid material. A single-crystal X-ray structure derived from growing crystals from a MeCN-CH2Cl2 solution-phase redox reaction gives a stoichiometry of TTF4[SVW11O40]·2H2O·2CH2Cl2 and reveals that there are two crystallographically different TTF cation moieties based on (TTF2)(2+) dimers. While the color and morphology of the microcrystalline or powdered TTF4[SVW11O40] differ from the single crystals prepared for structural analysis, all materials are spectroscopically (infrared (IR), Raman with respect to the TTF bands, and electron paramagnetic resonance (EPR)) indistinguishable. Raman spectra suggest that the charge transfer is unevenly distributed across the (TTF2)(2+) dimers, which is postulated to give rise to enhanced mixed-valence features. Structural, spectral, and other properties, such as conductivity, are compared with results available on the recently published molybdenum TTF4[SVMo11O40]·2H2O·2CH2Cl2 analogue, where the charge distribution is uniform on all TTF cations. In both examples, the position of the V atom is located over several sites. Elemental analysis and voltammetric data also are consistent with the formulations deduced from structural and spectroscopic studies. The conductivity at room temperature is in the semiconducting range, but significantly greater than that for the Mo analogue. EPR spectra at temperatures down to the liquid helium regime confirm the presence of paramagnetic V(IV) and paramagnetic oxidized TTF. The newly isolated TTF-SV(IV)W11O40 material also has magnetic functionality derived from the cationic and anionic components.

Defining the interaction of perforin with calcium and the phospholipid membrane.

Following its secretion from cytotoxic lymphocytes into the immune synapse, perforin binds to target cell membranes through its Ca(2+)-dependent C2 domain. Membrane-bound perforin then forms pores that allow passage of pro-apoptopic granzymes into the target cell. In the present study, structural and biochemical studies reveal that Ca(2+) binding triggers a conformational change in the C2 domain that permits four key hydrophobic residues to interact with the plasma membrane. However, in contrast with previous suggestions, these movements and membrane binding do not trigger irreversible conformational changes in the pore-forming MACPF (membrane attack complex/perforin-like) domain, indicating that subsequent monomer-monomer interactions at the membrane surface are required for perforin pore formation.

Contribution of the first K-homology domain of poly(C)-binding protein 1 to its affinity and specificity for C-rich oligonucleotides.

Poly-C-binding proteins are triple KH (hnRNP K homology) domain proteins with specificity for single stranded C-rich RNA and DNA. They play diverse roles in the regulation of protein expression at both transcriptional and translational levels. Here, we analyse the contributions of individual αCP1 KH domains to binding C-rich oligonucleotides using biophysical and structural methods. Using surface plasmon resonance (SPR), we demonstrate that KH1 makes the most stable interactions with both RNA and DNA, KH3 binds with intermediate affinity and KH2 only interacts detectibly with DNA. The crystal structure of KH1 bound to a 5'-CCCTCCCT-3' DNA sequence shows a 2:1 protein:DNA stoichiometry and demonstrates a molecular arrangement of KH domains bound to immediately adjacent oligonucleotide target sites. SPR experiments, with a series of poly-C-sequences reveals that cytosine is preferred at all four positions in the oligonucleotide binding cleft and that a C-tetrad binds KH1 with 10 times higher affinity than a C-triplet. The basis for this high affinity interaction is finally detailed with the structure determination of a KH1.W.C54S mutant bound to 5'-ACCCCA-3' DNA sequence. Together, these data establish the lead role of KH1 in oligonucleotide binding by αCP1 and reveal the molecular basis of its specificity for a C-rich tetrad.

A stargate mechanism of Microviridae genome delivery unveiled by cryogenic electron tomography.

Single-stranded DNA bacteriophages of the Microviridae family are major components of the global virosphere. Microviruses are highly abundant in aquatic ecosystems and are prominent members of the mammalian gut microbiome, where their diversity has been linked to various chronic health disorders. Despite the clear importance of microviruses, little is known about the molecular mechanism of host infection. Here, we have characterized an exceptionally large microvirus, Ebor, and provide crucial insights into long-standing mechanistic questions. Cryogenic electron microscopy of Ebor revealed a capsid with trimeric protrusions that recognise lipopolysaccharides on the host surface. Cryogenic electron tomography of the host cell colonized with virus particles demonstrated that the virus initially attaches to the cell via five such protrusions, located at the corners of a single pentamer. This interaction triggers a stargate mechanism of capsid opening along the 5-fold symmetry axis, enabling delivery of the virus genome. Despite variations in specific virus-host interactions among different Microviridae family viruses, structural data indicate that the stargate mechanism of infection is universally employed by all members of the family. Startlingly, our data reveal a mechanistic link for the opening of relatively small capsids made out of a single jelly-roll fold with the structurally unrelated giant viruses.

Building a brighter future for Africa with the African Light Source.

Africa is the only habitable continent that is not yet host to a light source - an important tool across disciplines. Scientists from the Executive Committee of the African Light Source Foundation discuss work towards building an advanced light source in Africa, and what remains to be done.

Targeting structural flexibility in low density lipoprotein by integrating cryo-electron microscopy and high-speed atomic force microscopy.

Low-density lipoprotein (LDL) plays a crucial role in cholesterol metabolism. Responsible for cholesterol transport from the liver to the organs, LDL accumulation in the arteries is a primary cause of cardiovascular diseases, such as atherosclerosis. This work focuses on the fundamental question of the LDL molecular structure, as well as the topology and molecular motions of apolipoprotein B-100 (apo B-100), which is addressed by single-particle cryo-electron microscopy (cryo-EM) and high-speed atomic force microscopy (HS-AFM). Our results suggest a revised model of the LDL core organization with respect to the cholesterol ester (CE) arrangement. In addition, a high-density region close to the flattened poles could be identified, likely enriched in free cholesterol. The most remarkable new details are two protrusions on the LDL surface, attributed to the protein apo B-100. HS-AFM adds the dimension of time and reveals for the first time a highly dynamic direct description of LDL, where we could follow large domain fluctuations of the protrusions in real time. To tackle the inherent flexibility and heterogeneity of LDL, the cryo-EM maps are further assessed by 3D variability analysis. Our study gives a detailed explanation how to approach the intrinsic flexibility of a complex system comprising lipids and protein.

TcpA from the Clostridium perfringens plasmid pCW3 is more closely related to the DNA translocase FtsK than to coupling proteins.

Conjugative DNA transfer is a major factor in the dissemination of antibiotic resistance and virulence genes. In the Gram-positive pathogen Clostridium perfringens, the majority of conjugative plasmids share the conserved tcp locus that governs the assembly of the transfer system. Here, we describe multiple structures of the coupling protein TcpA, an essential ATPase that is suggested to provide the mechanical force to propel the DNA through the transfer apparatus. The structures of TcpA in the presence and absence of nucleotides revealed conformational rearrangements and highlight a crucial role for the unstructured C terminus. Our findings reveal that TcpA shares most structural similarity with the FtsK DNA translocase, a central component of the bacterial cell division machinery. Our structural data suggest that conjugation in C. perfringens may have evolved from the bacterial chromosome segregation system and, accordingly, suggest the possibility that double-stranded DNA is transferred through the Tcp conjugation apparatus.

Synthesis and conformation of fluorinated ß-peptidic compounds.

Experimental and theoretical data indicate that, for α-fluoroamides, the F-C-C(O)-N(H) moiety adopts an antiperiplanar conformation. In addition, a gauche conformation is favoured between the vicinal C-F and C-N(CO) bonds in N-ß-fluoroethylamides. This study details the synthesis of a series of fluorinated ß-peptides (1-8) designed to use these stereoelectronic effects to control the conformation of ß-peptide bonds. X-ray crystal structures of these compounds revealed the expected conformations: with fluorine ß to a nitrogen adopting a gauche conformation, and fluorine α to a C=O group adopting an antiperiplanar conformation. Thus, the strategic placement of fluorine can control the conformation of a ß-peptide bond, with the possibility of directing the secondary structures of ß-peptides.

Synthetic precursors for TCNQF4(2-) compounds: synthesis, characterization, and electrochemical studies of (Pr4N)2TCNQF4 and Li2TCNQF4.

Careful control of the reaction stoichiometry and conditions enables the synthesis of both LiTCNQF(4) and Li(2)TCNQF(4) to be achieved. Reaction of LiI with TCNQF(4), in a 4:1 molar ratio, in boiling acetonitrile yields Li(2)TCNQF(4). However, deviation from this ratio or the reaction temperature gives either LiTCNQF(4) or a mixture of Li(2)TCNQF(4) and LiTCNQF(4). This is the first report of the large-scale chemical synthesis of Li(2)TCNQF(4). Attempts to prepare a single crystal of Li(2)TCNQF(4) have been unsuccessful, although air-stable (Pr(4)N)(2)TCNQF(4) was obtained by mixing Pr(4)NBr with Li(2)TCNQF(4) in aqueous solution. Pr(4)NTCNQF(4) was also obtained by reaction of LiTCNQF(4) with Pr(4)NBr in water. Li(2)TCNQF(4), (Pr(4)N)(2)TCNQF(4), and Pr(4)NTCNQF(4) have been characterized by UV-vis, FT-IR, Raman, and NMR spectroscopy, high resolution electrospray ionization mass spectrometry, and electrochemistry. The structures of single crystals of (Pr(4)N)(2)TCNQF(4) and Pr(4)NTCNQF(4) have been determined by X-ray crystallography. These TCNQF(4)(2-) salts will provide useful precursors for the synthesis of derivatives of the dianions.

Spontaneous redox synthesis of the charge transfer material TTF4[SVMo11O40].

The charge-transfer material TTF-SV(IV)Mo(11)O(40) (TTF = tetrathiafulvalene) was prepared by a spontaneous redox reaction between TTF and the vanadium-substituted polyoxometalate (n-Bu(4)N)(3)[SV(V)Mo(11)O(40)] in both solution and solid state phases. Single crystal X-ray diffraction gave the stoichiometry TTF(4)[SVMo(11)O(40)]·2H(2)O·2CH(2)Cl(2), with the single V atom positionally disordered with eight Mo atoms over the whole α-Keggin polyanion [SVMo(11)O(40)](4-). Raman spectra support the 1+ charge assigned to the oxidized TTF deduced from bond lengths, and elemental and voltammetric analysis also are consistent with this formulation. Scanning electron microscopy images showed a rod-type morphology for the new charge-transfer material. The conductivity of the solid at room temperature is in the semiconducting range. The TTF and (n-Bu(4)N)(3)[SV(V)Mo(11)O(40)] solids also undergo a rapid interfacial reaction, as is the case with TTF and TCNQ (TCNQ = tetracyanoquinodimethane) solids. EPR spectra at temperatures down to 2.6 K confirm the presence of two paramagnetic species, V(IV) and the oxidized TTF radical. Spectral evidence shows that the TTF-SV(IV)Mo(11)O(40) materials prepared from either solution or solid state reactions are equivalent. The newly isolated TTF-SV(IV)Mo(11)O(40) material represents a new class of TTF-polyoxometalate compound having dual electrical and magnetic functionality derived from both the cationic and anionic components.

Hands-on training in structural biology, a tool for sustainable development in Africa series 4.

Structural biology is an essential tool for understanding the molecular basis of diseases, which can guide the rational design of new drugs, vaccines, and the optimisation of existing medicines. However, most African countries do not conduct structural biology research due to limited resources, lack of trained persons, and an exodus of skilled scientists. The most urgent requirement is to build on the emerging centres in Africa - some well-established, others growing. This can be achieved through workshops that improve networking, grow skills, and develop mechanisms for access to light source beamlines for defining X-ray structures across the continent. These would encourage the growth of structural biology, which is central to understanding biological functions and developing new antimicrobials and other drugs. In this light, a hands-on training workshop in structural biology series 4 was organised by BioStruct-Africa and the Malaria Research and Training Center (MRTC) in Bamako, Mali, to help bridge this gap. The workshop was hosted by MRTC from the 25th to 28th of April 2022. Through a series of lectures and practicals, the workshop enlightened the participants on how structural biology can be utilised to find solutions to the prevalent diseases in Africa. The short training gave them an overview of target selection, protein production and purification, structural determination techniques, and analysis in combination with high-throughput, structure-guided, fragment-based drug design.

The Specificity of ParR Binding Determines the Incompatibility of Conjugative Plasmids in Clostridium perfringens.

Plasmids that encode the same replication machinery are generally unable to coexist in the same bacterial cell. However, Clostridium perfringens strains often carry multiple conjugative toxin or antibiotic resistance plasmids that are closely related and encode similar Rep proteins. In many bacteria, plasmid partitioning upon cell division involves a ParMRC system; in C. perfringens plasmids, there are approximately 10 different ParMRC families, with significant differences in amino acid sequences between each ParM family (15% to 54% identity). Since plasmids carrying genes belonging to the same ParMRC family are not observed in the same strain, these families appear to represent the basis for plasmid compatibility in C. perfringens. To understand this process, we examined the key recognition steps between ParR DNA-binding proteins and their parC binding sites. The ParR proteins bound to sequences within a parC site from the same ParMRC family but could not interact with a parC site from a different ParMRC family. These data provide evidence that compatibility of the conjugative toxin plasmids of C. perfringens is mediated by their parMRC-like partitioning systems. This process provides a selective advantage by enabling the host bacterium to maintain separate plasmids that encode toxins that are specific for different host targets. IMPORTANCE Toxins produced by the Gram-positive pathogen Clostridium perfringens are primarily encoded by genes found on different conjugative plasmids. These plasmids encode highly similar replication proteins and therefore should be incompatible, but they are often found to coexist within the same isolate. In this study, we showed that a series of phylogenetically related ParMRC plasmid partitioning systems, structures that are normally responsible for ensuring that plasmids segregate correctly at cell division, dictate which toxin plasmid combinations can coexist within the same bacterial cell. We dissected the recognition steps between the DNA-binding ParMRC component, ParR, and the plasmid-derived centromere, parC. Our data suggested a mechanism by which plasmids encoding ParMRC systems from the same family are incompatible, whereas plasmids encoding ParMRC systems from distinct families are compatible. This work provides insight into how these cells can maintain multiple highly similar toxin plasmids, which is a critical first step in understanding how to limit the disease-causing potential of C. perfringens.

Cryo-EM structure of MsbA in saposin-lipid nanoparticles (Salipro) provides insights into nucleotide coordination.

The ATP-binding cassette transporter MsbA is a lipid flippase, translocating lipid A, glycolipids, and lipopolysaccharides from the inner to the outer leaflet of the inner membrane of Gram-negative bacteria. It has been used as a model system for time-resolved structural studies as several MsbA structures in different states and reconstitution systems (detergent/nanodiscs/peptidiscs) are available. However, due to the limited resolution of the available structures, detailed structural information on the bound nucleotides has remained elusive. Here, we have reconstituted MsbA in saposin A-lipoprotein nanoparticles (Salipro) and determined the structure of ADP-vanadate-bound MsbA by single-particle cryo-electron microscopy to 3.5 Å resolution. This procedure has resulted in significantly improved resolution and enabled us to model all side chains and visualise detailed ADP-vanadate interactions in the nucleotide-binding domains. The approach may be applicable to other dynamic membrane proteins.

Biochemical and structural characterization of the subclass B1 metallo-ß-lactamase VIM-4.

The metallo-ß-lactamase VIM-4, mainly found in Pseudomonas aeruginosa or Acinetobacter baumannii, was produced in Escherichia coli and characterized by biochemical and X-ray techniques. A detailed kinetic study performed in the presence of Zn²+ at concentrations ranging from 0.4 to 100 µM showed that VIM-4 exhibits a kinetic profile similar to the profiles of VIM-2 and VIM-1. However, VIM-4 is more active than VIM-1 against benzylpenicillin, cephalothin, nitrocefin, and imipenem and is less active than VIM-2 against ampicillin and meropenem. The crystal structure of the dizinc form of VIM-4 was solved at 1.9 Å. The sole difference between VIM-4 and VIM-1 is found at residue 228, which is Ser in VIM-1 and Arg in VIM-4. This substitution has a major impact on the VIM-4 catalytic efficiency compared to that of VIM-1. In contrast, the differences between VIM-2 and VIM-4 seem to be due to a different position of the flapping loop and two substitutions in loop 2. Study of the thermal stability and the activity of the holo- and apo-VIM-4 enzymes revealed that Zn²+ ions have a pronounced stabilizing effect on the enzyme and are necessary for preserving the structure.

Structural and functional characterization of 2-oxo-histidine in oxidized PerR protein.

In Bacillus subtilis, PerR is a metal-dependent sensor of hydrogen peroxide. PerR is a dimeric zinc protein with a regulatory site that coordinates either Fe(2+) (PerR-Zn-Fe) or Mn(2+) (PerR-Zn-Mn). Though most of the peroxide sensors use cysteines to detect H(2)O(2), it has been shown that reaction of PerR-Zn-Fe with H(2)O(2) leads to the oxidation of one histidine residue. Oxidation of PerR leads to the incorporation of one oxygen atom into His37 or His91. This study presents the crystal structure of the oxidized PerR protein (PerR-Zn-ox), which clearly shows a 2-oxo-histidine residue in position 37. Formation of 2-oxo-histidine is demonstrated and quantified by HPLC-MS/MS. EPR experiments indicate that PerR-Zn-H37ox retains a significant affinity for the regulatory metal, whereas PerR-Zn-H91ox shows a considerably reduced affinity for the metal ion. In spite of these major differences in terms of metal binding affinity, oxidation of His37 and/or His91 in PerR prevents DNA binding.