RESUMO
The properties of adhesive mortars can change due to heating, compromising the durability of the coating systems. The aim of this article was to evaluate the influence of cement and polymer contents on the tensile bond strength of adhesive mortars after thermal storage. Ceramic tiling system specimens were prepared with seventeen formulations of adhesive mortars. These specimens were stored under dry (reference) at temperature of 23 ± 2 °C and 60 ± 5% of relative humidity and thermal (temperature of 70 ± 2 °C) conditions. The results showed that the cement content was the major factor concerning tensile bond strength. The vinyl acetate-ethylene (VAE) polymer improved the tensile bond strength of mortars under thermal storage. However, the hydroxypropyl methyl cellulose (HPMC) content contributed to the tensile bond strength only when higher cement contents were used. Besides, microstructure analysis showed that ettringite was degraded during thermal storage.