Tuning Main Group Element-based Metal-Organic Framework to Boost Electrocatalytic Nitrogen Reduction Under Ambient Conditions.

Main group element-based materials are emerging catalysts for ammonia (NH3 ) production via a sustainable electrochemical nitrogen reduction reaction (N2 RR) pathway under ambient conditions. However, their N2 RR performances are less explored due to the limited active behavior and unclear mechanism. Here, an aluminum-based defective metal-organic framework (MOF), aluminum-fumarate (Al-Fum), is investigated. As a proof of concept, the pristine Al-Fum MOF is synthesized by the solvothermal reaction process, and the defect engineering method namely solvent-assisted linker exchange, is applied to create the defective Al sites. The defective Al sites play an important role in ensuring the N2 RR activity for defective Al-Fum. It is found that only the defective Al-Fum enables stable and effective electrochemical N2 RR, in terms of the highest production rate of 53.9 µg(NH3 ) h-1 mgcat -1 (in 0.4 m K2 SO4 ) and the Faradaic efficiency of 73.8% (in 0.1 m K2 SO4 ) at -0.15 V vs reversible hydrogen electrode) under ambient conditions. Density functional theory calculations confirm that the N2 activation can be achieved on the defective Al sites. Such sites also allow the subsequent protonation process via the alternating associative mechanism. This defect characteristic gives the main group Al-based MOFs the ability to serve as promising electrocatalysts for N2 RR and other attractive applications.

Effects of Mo, Nb, Ta, Ti, and Zr on Mechanical Properties of Equiatomic Hf-Mo-Nb-Ta-Ti-Zr Alloys.

Nowadays refractory high-entropy alloys (RHEAs) are regarded as great candidates for the replacement of superalloys at high temperature. To design a RHEA, one must understand the pros and cons of every refractory element. However, the elemental effect on mechanical properties remains unclear. In this study, the subtraction method was applied on equiatomic HfMoNbTaTiZr alloys to discover the role of each element, and, thus, HfMoNbTaTiZr, HfNbTaTiZr, HfMoTaTiZr, HfMoNbTiZr, HfMoNbTaZr, and HfMoNbTaTi were fabricated and analyzed. The microstructure and mechanical properties of each alloy at the as-cast state were examined. The solid solution phase formation rule and the solution strengthening effect are also discussed. Finally, the mechanism of how Mo, Nb, Ta, Ti, and Zr affect the HfMoNbTaTiZr alloys was established after comparing the properties of these alloys.

Functionalizing Separator by Coating a Lithiophilic Metal for Dendrite-Free Anode-free Lithium Metal Batteries.

A stable anode-free lithium metal battery (AFLMB) is accomplished by the adoption of a facile fabricated amorphous antimony (Sb)-coated separator (SbSC). The large specific surface area of the separator elevates lithium (Li)-Sb alloy kinetic, improving Li wetting ability on pristine copper current collector (Cu). When tested with LiNi0.8 Mn0.1 Co0.1 O2 (NMC811) as cathode, the full cell with SbSC demonstrates low nucleation overpotential with compact, dendrite-free and homogeneous Li plating, and exhibits a notable lithium inventory retention rate (LIRR) of 99.8 % with capacity retention of 93.6 % after 60 cycles at 0.5 C-rate. Conversely, full cells containing pristine separator/Cu (i. e., SC) and pristine separator/Sb-coated current collector (i. e., SSbC) display poor cycling performances with low LIRRs. Density functional theory corroborates the nucleation behaviours observed during in-situ half-cell Li deposition. Functionalizing polymeric separator by metallic coating in AFLMB is a novel approach in improving the cycle life of an AFLMB by promoting homogeneous Li plating behavior. This innovative approach exemplifies a promising applicability for uniform Li-plating behavior to achieve a longer cycle life in AFLMB.