In situ experimental evidences for responses of abyssal benthic biota to shifts in phytodetritus compositions linked to global climate change.

Abyssal plains cover more than half of Earth's surface, and the main food source in these ecosystems is phytodetritus, mainly originating from primary producers in the euphotic zone of the ocean. Global climate change is influencing phytoplankton abundance, productivity, and distribution. Increasing importance of picoplankton over diatom as primary producers in surface oceans (especially projected for higher latitudes) is projected and hence altering the quantity of organic carbon supplied to the abyssal seafloor as phytodetritus, consequences of which remain largely unknown. Here, we investigated the in situ responses of abyssal biota from viruses to megafauna to different types of phytoplankton input (diatoms or cyanobacteria which were labeled with stable isotopes) at equatorial (oligotrophic) and temperate (eutrophic) benthic sites in the Pacific Ocean (1°N at 4277 m water depth and 39°N at 5260 m water depth, respectively). Our results show that meiofauna and macrofauna generally preferred diatoms as a food source and played a relatively larger role in the consumption of phytodetritus at higher latitudes (39°N). Contrarily, prokaryotes and viruses showed similar or even stronger responses to cyanobacterial than to diatom supply. Moreover, the response of prokaryotes and viruses was very rapid (within 1-2 days) at both 1°N and 39°N, with quickest responses reported in the case of cyanobacterial supply at higher latitudes. Overall, our results suggest that benthic deep-sea eukaryotes will be negatively affected by the predicted decrease in diatoms in surface oceans, especially at higher latitudes, where benthic prokaryotes and viruses will otherwise likely increase their quantitative role and organic carbon cycling rates. In turn, such changes can contribute to decrease carbon transfer from phytodetritus to higher trophic levels, with strong potential to affect oceanic food webs, their biodiversity and consequently carbon sequestration capacity at the global scale.

Abundant Chitinous Structures in Chilostomella (Foraminifera, Rhizaria) and Their Potential Functions.

Benthic foraminifera, members of Rhizaria, inhabit a broad range of marine environments and are particularly common in hypoxic sediments. The biology of benthic foraminifera is key to understanding benthic ecosystems and relevant biogeochemical cycles, especially in hypoxic environments. Chilostomella is a foraminiferal genus commonly found in hypoxic deep-sea sediments and has poorly understood ecological characteristics. For example, the carbon isotopic compositions of their lipids are substantially different from other co-occurring genera, probably reflecting unique features of its metabolism. Here, we investigated the cytoplasmic and ultrastructural features of Chilostomella ovoidea from bathyal sediments of Sagami Bay, Japan, based on serial semi-thin sections examined using an optical microscope followed by a three-dimensional reconstruction, combined with TEM observations of ultra-thin sections. Observations by TEM revealed the presence of abundant electron-dense structures dividing the cytoplasm. Based on histochemical staining, these structures are shown to be composed of chitin. Our 3D reconstruction revealed chitinous structures in the final seven chambers. These exhibited a plate-like morphology in the final chambers but became rolled up in earlier chambers (toward the proloculus). These chitinous, plate-like structures may function to partition the cytoplasm in a chamber to increase the surface/volume ratio and/or act as a reactive site for some metabolic functions.

Cytologic and Genetic Characteristics of Endobiotic Bacteria and Kleptoplasts of Virgulinella fragilis (Foraminifera).

The benthic foraminifer Virgulinella fragilis Grindell and Collen 1976 has multiple putative symbioses with both bacterial and kleptoplast endobionts, possibly aiding its survival in environments from dysoxia (5-45 µmol-O2 /L) to microxia (0-5 µmol-O2 /L) and in the dark. To clarify the origin and function of V. fragilis endobionts, we used genetic analyses and transmission electron microscope observations. Virgulinella fragilis retained δ-proteobacteria concentrated at its cell periphery just beneath the cell membranes. Unlike another foraminifer Stainforthia spp., which retains many bacterial species, V. fragilis has a less variable bacterial community. This suggests that V. fragilis maintains a specific intracellular bacterial flora. Unlike the endobiotic bacteria, V. fragilis klepto-plasts originated from various diatom species and are found in the interior cytoplasm. We found evidence of both retention and digestion of kleptoplasts, and of fragmentation of the kleptoplastid outer membrane that likely facilitates transport of kleptoplastid products to the host. Accumulations of mitochondria were observed encircling endobiotic bacteria. It is likely that the bacteria use host organic material for carbon oxidation. The mitochondria may use oxygen available around the δ-proteobacteria and synthesize adenosine triphosphate, perhaps for sulfide oxidation.

Distribution of microplastics in bathyal- to hadal-depth sediments and transport process along the deep-sea canyon and the Kuroshio Extension in the Northwest Pacific.

Understanding microplastic (MP) behavior in oceans is crucial for reducing marine plastic pollution. However, the complex process underlying MP transportation to the deep seafloor remains unknown despite the deep sea being considered its major sink. We focused on MP distribution in Sagami Bay (adjacent to highly populated areas of Japan), the plate triple junction connected through the Sagami Trough, and the abyssal plain immediately below the Kuroshio Extension. We observed the highest number of MPs in the abyssal stations, more than previously reported. The polymer types and aspect ratio of MPs in the abyssal stations significantly differed from those in the bathyal/hadal stations. The study suggests that MPs accumulated in the open ocean surface layer sink to the abyssal plains immediately below it, while MPs from land sources accumulate in the bathyal depth and are transported to the hadal depth near the coast through turbidity currents along the submarine canyon.

Microbial decomposition of biodegradable plastics on the deep-sea floor.

Microbes can decompose biodegradable plastics on land, rivers and seashore. However, it is unclear whether deep-sea microbes can degrade biodegradable plastics in the extreme environmental conditions of the seafloor. Here, we report microbial decomposition of representative biodegradable plastics (polyhydroxyalkanoates, biodegradable polyesters, and polysaccharide esters) at diverse deep-sea floor locations ranging in depth from 757 to 5552 m. The degradation of samples was evaluated in terms of weight loss, reduction in material thickness, and surface morphological changes. Poly(L-lactic acid) did not degrade at either shore or deep-sea sites, while other biodegradable polyesters, polyhydroxyalkanoates, and polysaccharide esters were degraded. The rate of degradation slowed with water depth. We analysed the plastic-associated microbial communities by 16S rRNA gene amplicon sequencing and metagenomics. Several dominant microorganisms carried genes potentially encoding plastic-degrading enzymes such as polyhydroxyalkanoate depolymerases and cutinases/polyesterases. Analysis of available metagenomic datasets indicated that these microorganisms are present in other deep-sea locations. Our results confirm that biodegradable plastics can be degraded by the action of microorganisms on the deep-sea floor, although with much less efficiency than in coastal settings.

Active bacterial flora surrounding foraminifera (xenophyophorea) living on the deep-sea floor.

Bacteria form unique ecosystems by coexisting with large organisms. Here we present the first evidence of active flora surrounding xenophyophorea revealed through clone analyses of environmental ribosomal RNA gene sequences. The flora included eight phyla in the xenophyophorean cells with agglutinated test. The major operational taxonomic units were unique from that in the near-surface sediment. This flora appears to be formed by coexistence with xenophyophores.

Effectiveness of hierarchical Bayesian models for citizen science data with missing values: A case study on the factors influencing beach litter in Shimane Prefecture, Japan.

Citizen science can play an important role in addressing the issue of marine debris. However, citizen science data are often composed of inconsistent methods compared to data collected by experts. In this study, we applied beach cleanup data, collected in different survey years at different survey sites, to a hierarchical Bayesian model to elucidate the factors affecting the distribution of beach litter. The results showed the model accounting for differences between years had a smaller Watanabe-Akaike Information criterion than the model that did not account for it, indicating better accuracy of the model. The amount of beach litter was influenced by current velocity and bay openness, and these effects varied across years. The results indicate that citizen science data, which may contain missing values due to various constraints such as economic and human resources, can make an important contribution toward solving marine debris issues by flexible statistical analysis methods.

The Abyssal Parasitic Flatworm Fecampia cf. abyssicola: New Records, Anatomy, and Molecular Phylogeny, with a Discussion on Its Systematic Position.

AbstractThe order Fecampiida, a group of parasitic turbellarians, has been poorly studied in terms of its species diversity, morphology, and ecology. Fecampiida is positioned within the monophyletic clade Adiaphanida, along with Tricladida and Prolecithophora, but their phylogenetic relationships are not well understood. Although the nervous and muscular systems of only two species in Fecampiida have been studied, recent research inferred morphological similarities between Fecampiida and Prolecithophora. In this study, we collected fecampiid cocoons and juveniles at depths of 1861-4438 m in Japanese waters. We identified the species on the basis of swimming juvenile specimens and by using histological and molecular methods, while we also examined its musculature and nervous system. Our study revealed a more complex nervous system than previously reported, with dorsal, lateral, and ventral pairs of longitudinal nerve cords connected through an anterior neuropile and posterior transverse commissures. While the nervous and muscular morphology suggested similarities with Prolecithophora, our phylogenetic analysis did not support a close relationship between Fecampiida and Prolecithophora.

Foraminifera and plastic pollution: Knowledge gaps and research opportunities.

Plastic has become one of the most ubiquitous and environmentally threatening sources of pollution in the Anthropocene. Beyond the conspicuous visual impact and physical damages, plastics both carry and release a cocktail of harmful chemicals, such as monomers, additives and persistent organic pollutants. Here we show through a review of the scientific literature dealing with both plastic pollution and benthic foraminifera (Rhizaria), that despite their critical roles in the structure and function of benthic ecosystems, only 0.4% of studies have investigated the effects of micro- and nano-plastics on this group. Consequently, we urge to consider benthic foraminifera in plastic pollution studies via a tentative roadmap that includes (i) the use of their biological, physiological and behavioral responses that may unveil the effects of microplastics and nanoplastics and (ii) the evaluation of the indicative value of foraminiferal species to serve as proxies for the degree of pollution. This appears particularly timely in the context of the development of management strategies to restore coastal ecosystems.

mTORC1 regulates phagosome digestion of symbiotic bacteria for intracellular nutritional symbiosis in a deep-sea mussel.

Phagocytosis is one of the methods used to acquire symbiotic bacteria to establish intracellular symbiosis. A deep-sea mussel, Bathymodiolus japonicus, acquires its symbiont from the environment by phagocytosis of gill epithelial cells and receives nutrients from them. However, the manner by which mussels retain the symbiont without phagosome digestion remains unknown. Here, we show that controlling the mechanistic target of rapamycin complex 1 (mTORC1) in mussels leads to retaining symbionts in gill cells. The symbiont is essential for the host mussel nutrition; however, depleting the symbiont's energy source triggers the phagosome digestion of symbionts. Meanwhile, the inhibition of mTORC1 by rapamycin prevented the digestion of the resident symbionts and of the engulfed exogenous dead symbionts in gill cells. This indicates that mTORC1 promotes phagosome digestion of symbionts under reduced nutrient supply from the symbiont. The regulation mechanism of phagosome digestion by mTORC1 through nutrient signaling with symbionts is key for maintaining animal-microbe intracellular nutritional symbiosis.

Evolution of elongation factor-like (EFL) protein in Rhizaria is revised by radiolarian EFL gene sequences.

Elongation factor 1α (EF-1α) and elongation factor-like (EFL) proteins are considered to carry out equivalent functions in translation in eukaryotic cells. Elongation factor 1α and EFL genes are patchily distributed in the global eukaryotic tree, suggesting that the evolution of these elongation factors cannot be reconciled without multiple lateral gene transfer and/or ancestral co-occurrence followed by differential loss of either of the two factors. Our current understanding of the EF-1α/EFL evolution in the eukaryotic group Rhizaria, composed of Foraminifera, Radiolaria, Filosa, and Endomyxa, remains insufficient, as no information on EF-1α/EFL gene is available for any members of Radiolaria. In this study, EFL genes were experimentally isolated from four polycystine radiolarians (i.e. Dictyocoryne, Eucyrtidium, Collozoum, and Sphaerozoum), as well as retrieved from publicly accessible expressed sequence tag data of two acantharean radiolarians (i.e. Astrolonche and Phyllostaurus) and the endomyxan Gromia. The EFL homologs from radiolarians, foraminiferans, and Gromia formed a robust clade in both maximum-likelihood and Bayesian phylogenetic analyses, suggesting that EFL genes were vertically inherited from their common ancestor. We propose an updated model for EF-1α/EFL evolution in Rhizaria by incorporating new EFL data obtained in this study.

16S rRNA Gene Metabarcoding Indicates Species-Characteristic Microbiomes in Deep-Sea Benthic Foraminifera.

Foraminifera are unicellular eukaryotes that are an integral part of benthic fauna in many marine ecosystems, including the deep sea, with direct impacts on benthic biogeochemical cycles. In these systems, different foraminiferal species are known to have a distinct vertical distribution, i.e., microhabitat preference, which is tightly linked to the physico-chemical zonation of the sediment. Hence, foraminifera are well-adapted to thrive in various conditions, even under anoxia. However, despite the ecological and biogeochemical significance of foraminifera, their ecology remains poorly understood. This is especially true in terms of the composition and diversity of their microbiome, although foraminifera are known to harbor diverse endobionts, which may have a significant meaning to each species' survival strategy. In this study, we used 16S rRNA gene metabarcoding to investigate the microbiomes of five different deep-sea benthic foraminiferal species representing differing microhabitat preferences. The microbiomes of these species were compared intra- and inter-specifically, as well as with the surrounding sediment bacterial community. Our analysis indicated that each species was characterized with a distinct, statistically different microbiome that also differed from the surrounding sediment community in terms of diversity and dominant bacterial groups. We were also able to distinguish specific bacterial groups that seemed to be strongly associated with particular foraminiferal species, such as the family Marinilabiliaceae for Chilostomella ovoidea and the family Hyphomicrobiaceae for Bulimina subornata and Bulimina striata. The presence of bacterial groups that are tightly associated to a certain foraminiferal species implies that there may exist unique, potentially symbiotic relationships between foraminifera and bacteria that have been previously overlooked. Furthermore, the foraminifera contained chloroplast reads originating from different sources, likely reflecting trophic preferences and ecological characteristics of the different species. This study demonstrates the potential of 16S rRNA gene metabarcoding in resolving the microbiome composition and diversity of eukaryotic unicellular organisms, providing unique in situ insights into enigmatic deep-sea ecosystems.

Optimization of a hyperspectral imaging system for rapid detection of microplastics down to 100 µm.

Plastic pollution has become one of the most emergent issues threating aquatic and terrestrial ecosystems. However, it is still challenging to rapidly detect small microplastics. Here, we present a method to rapidly detect microplastics using hyperspectral imaging in which we optimized a commercially available hyperspectral imaging system (Pika NIR-640, Resonon Inc., USA). The optimizations included: (1) changing the four-lamp assembly to a symmetrical set of converged-light near-infrared lamps that are placed sideways instead of above the sample stage; (2) adopting a macro-photography technique by applying an extension tube between the camera and the lens, and moving the lens of the hyperspectral camera to the imaging target (working distance of ~3 cm); (3) adjusting the exposure and aspect ratio by tuning the frame rate and scan speed of the imaging system. After optimization, the detection resolution of each pixel improved from 250 µm to 14.8 µm. With the optimized system, microplastics down to 100 µm in size were rapidly detected. This result is promising for the application of our new method in the accelerated detection of microplastics and will contribute to a better understanding of the microplastic pollution situation.

Plastic additives in deep-sea debris collected from the western North Pacific and estimation for their environmental loads.

Plastic waste has become a growing concern in terms of marine pollution, but little information is available on plastic debris and its possible risks of chemical additives exposure in the deep-sea. This study focused on identification of polymer type and additive concentrations in 21 plastic debris collected from deep-sea of Sagami Bay, Japan and West Pacific Ocean under the Kuroshio Extension and its recirculation gyre (KERG) zone (water depth: 1388-5819 m). Polyethylene (PE) was dominant polymer (57% of the total) in samples, followed by polyvinylchloride (PVC), epoxy resin, polyester (PES), and polypropylene. In plastic additives, bis (2-ethylhexyl) phthalate (DEHP) was detected to be contained in a PVC sheet at concentration of 48%. Butylated hydroxytoluene (BHT) was also detected in PE plastic debris with median concentration of 12,000 ng/g. PES clothes were detected to contain dyeing mixtures, 1,2,4-trichlorobenzene (1,2,4-TCB), up to 42,000 ng/g. Knowing the estimated number of plastic debris under KE current, the minimum burden of chemical additives were estimated that 720 kg of dibutyl phthalate, 570 kg of BHT, 230 kg of DEHP, and 160 kg of 1,2,4-TCB exist on the seabed of KERG zone. This result strongly suggests that enormous amount of hazardous additives lie within plastic debris on abyssal level of the ocean.

Development of robust models for rapid classification of microplastic polymer types based on near infrared hyperspectral images.

Hyperspectral data in the near infrared range were examined for nine common types of plastic particles of 1 mm and 100-500 µm sizes on dry and wet glass fiber filters. Weaker peak intensities were detected for small particles compared to large particles, and the reflectances were weaker at longer wavelengths when the particles were measured on a wet filter. These phenomena are explainable due to the effect of the correlation between the particle size and the absorption of infrared light by water. We constructed robust classification models that are capable of classifying polymer types, regardless of particle size or filter conditions (wet vs. dry), based on hyperspectral data for small particles measured on wet filters. Using the models, we also successfully classified the polymer type of polystyrene beads covered with microalgae, which simulates the natural conditions of microplastics in the ocean. This study suggests that hyperspectral imaging techniques with appropriate classification models allow the identification of microplastics without the time- and labor-consuming procedures of drying samples and removing biofilms, thus enabling more rapid analyses.

Massive occurrence of benthic plastic debris at the abyssal seafloor beneath the Kuroshio Extension, the North West Pacific.

The abyss (3500-6500 m) covers the bulk of the deep ocean floor yet little is known about the extent of plastic debris on the abyssal seafloor. Using video imagery we undertook a quantitative assessment of the debris present on the abyssal seafloor (5700-5800 m depth) beneath the Kuroshio Extension current system in the Northwest Pacific. This body of water is one of the major transit pathways for the massive amounts of debris that are entering the North Pacific Ocean from Asia. Shallower sites (1400-1500 m depth) were also investigated for comparison. The dominant type of debris was single-use plastics - mainly bags and food packaging. The density of the plastic debris (mean 4561 items/km2) in the abyssal zone was the highest recorded for an abyssal plain suggesting that the deep-sea basin in the Northwest Pacific is a significant reservoir of plastic debris.

Characterization of microplastics on filter substrates based on hyperspectral imaging: Laboratory assessments.

Microplastic pollution has become an urgent issue because it adversely affects ecosystems. However, efficient methods to detect and characterize microplastic particles are still in development. By conducting a series of laboratory assessments based on near-infrared hyperspectral imaging in the wavelength range of 900-1700 nm, we report the fundamental spectral features of (i) 11 authentic plastics and (ii) 11 filter substrate materials. We found that different plastic polymers showed distinct spectral features at 1150-1250 nm, 1350-1450 nm and 1600-1700 nm, enabling their automatic recognition and identification with spectral separation algorithms. Using an improved hyperspectral imaging system, we demonstrated the detection of three types of microplastic particles, polyethylene, polypropylene and polystyrene, down to 100 µm in diameter. As a filter substrate, a gold-coated polycarbonate filter (GPC0847-BA) showed constant reflectance over 900-1700 nm and a large radiative contrast against loaded plastic particles. Glass fiber filters (GF10 and GF/F) would also be suitable substrates due to their low cost and easy commercial availability. This study provides key parameters for applying hyperspectral imaging techniques for the detection of microplastics.

Sediment sampling with a core sampler equipped with aluminum tubes and an onboard processing protocol to avoid plastic contamination.

Microplastics are abundant even on the deep-sea floor far from land and the ocean surface where human activities take place. To obtain samples of microplastics from the deep-sea floor, a research vessel and suitable sampling equipment, such as a multiple corer, a box corer, or a push corer manipulated by a remotely operated (ROV) or human occupied vehicle (HOV) are needed. Most such corers use sampling tubes made of plastic, such as polycarbonate, acrylic, or polyvinyl chloride. These plastic tubes are easily scratched by sediment particles, in particular during collection of coarse sandy sediments, and, consequently, the samples may become contaminated with plastic from the tube. Here, we report on the use of aluminum tubes with both a multiple corer and a push corer to prevent such plastic contamination. When compared with plastic tubes, aluminum tubes have the disadvantages of heavier weight and non-transparency. We suggest ways to overcome these problems, and we also present an onboard processing protocol to prevent plastic contamination during sediment core sampling when plastic tubes are used. •Use of a sediment corer with aluminum tubes reduces the risk of plastic contamination in the sediment samples•The proposed method allows undisturbed sediment cores to be retrieved with comparable efficiency to conventional transparent core tubes.

A new small device made of glass for separating microplastics from marine and freshwater sediments.

Separating microplastics from marine and freshwater sediments is challenging, but necessary to determine their distribution, mass, and ecological impacts in benthic environments. Density separation is commonly used to extract microplastics from sediments by using heavy salt solutions, such as zinc chloride and sodium iodide. However, current devices/apparatus used for density separation, including glass beakers, funnels, upside-down funnel-shaped separators with a shut-off valve, etc., possess various shortcomings in terms of recovery rate, time consumption, and/or usability. In evaluating existing microplastic extraction methods using density separation, we identified the need for a device that allows rapid, simple, and efficient extraction of microplastics from a range of sediment types. We have developed a small glass separator, without a valve, taking a hint from an Utermöhl chamber. This new device is easy to clean and portable, yet enables rapid separation of microplastics from sediments. With this simple device, we recovered 94-98% of <1,000 µm microplastics (polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, and polystyrene). Overall, the device is efficient for various sizes, polymer types, and sediment types. Also, microplastics collected with this glass-made device remain chemically uncontaminated, and can, therefore, be used for further analysis of adsorbing contaminants and additives on/to microplastics.

A small, stainless-steel sieve optimized for laboratory beaker-based extraction of microplastics from environmental samples.

Removing non-plastic materials is a mandatory process for studying microplastics in environmental samples, and non-plastic materials, both inorganic and organic matter, are often removed chemically through sequential processes. In the multiple chemical treatment processes, the samples need to be collected and the reagent removed at the end of each chemical treatment before the samples are again exposed to a different reagent in a separate container. This leads to a loss of microplastics to some extent. Here, we developed a new, yet simple, small sieve made of stainless-steel that can fit in a laboratory beaker (e.g. 200 ml volume), allowing it to be transferred as-is between chemical treatments of environmental samples, even being soakable in a beaker of acid solution. The collection rates of microplastics were significantly higher in the small stainless-steel sieve than the commonly used filter method for different size of microplastic particles. The use of the new sieve means the processes of rinsing off and filtering samples can be abbreviated throughout the entire process of non-plastic matter removal from environmental samples, contributing to a lower chance of microplastic loss. The time consumed in the sieve method was also significantly lower than for the filtering method due to the elimination of the collection and rinsing steps, thus the use of this sieve can reduce processing time for the samples. The new method is innovative in terms of reducing both the microplastic loss and processing time during chemical treatment processes. •The method developed allows the lower chance of microplastic loss during chemical digestion process•The method reduces the time of sequential processes during chemical digestion.