RESUMO
The sensing of gravity has emerged as a tool in geophysics applications such as engineering and climate research1-3, including the monitoring of temporal variations in aquifers4 and geodesy5. However, it is impractical to use gravity cartography to resolve metre-scale underground features because of the long measurement times needed for the removal of vibrational noise6. Here we overcome this limitation by realizing a practical quantum gravity gradient sensor. Our design suppresses the effects of micro-seismic and laser noise, thermal and magnetic field variations, and instrument tilt. The instrument achieves a statistical uncertainty of 20 E (1 E = 10-9 s-2) and is used to perform a 0.5-metre-spatial-resolution survey across an 8.5-metre-long line, detecting a 2-metre tunnel with a signal-to-noise ratio of 8. Using a Bayesian inference method, we determine the centre to ±0.19 metres horizontally and the centre depth as (1.89 -0.59/+2.3) metres. The removal of vibrational noise enables improvements in instrument performance to directly translate into reduced measurement time in mapping. The sensor parameters are compatible with applications in mapping aquifers and evaluating impacts on the water table7, archaeology8-11, determination of soil properties12 and water content13, and reducing the risk of unforeseen ground conditions in the construction of critical energy, transport and utilities infrastructure14, providing a new window into the underground.
RESUMO
The aim of this study was to develop a better understanding of how electrical resistivity surveys can be used to locate clandestine graves. Resistivity surveys were conducted regularly over three simulated clandestine graves containing a pig cadaver, no cadaver and a pig cadaver wrapped in tarpaulin, respectively. Additionally, soil and groundwater samples were collected from two more simulated graves outside the survey area. The grave containing a pig cadaver was detectable from a low resistivity anomaly in the survey data. Groundwater data suggest that the resistivity anomaly associated with the surveyed pig grave was caused by a localised increase in groundwater conductivity. Wrapping a cadaver was found to initially change the resistivity response of a grave to a high resistivity anomaly. Resistivity surveys did not detect the disturbed soil in the grave that did not contain a cadaver. Although soil samples showed grave soil to be more porous than undisturbed soil, the lack of response from the grave that did not contain a cadaver suggests that disturbed soil was not responsible for the resistivity anomalies observed in this study. Resistivity surveys successfully detected all graves containing cadavers throughout the study, whilst also showing the potential to eliminate the need for mass excavation in a genuine search.