Substrate surface patterning by optical near field modulation around colloidal particles immersed in a liquid.

Optical near field enhancements in the vicinity of particles illuminated by laser light are increasingly recognized as a powerful tool for nanopatterning applications, but achieving sub-wavelength details from the near-field distribution remains a challenge. Here we present a quantitative analysis of the spatial modulation of the near optical fields generated using single 8 ps, 355 nm (and 532 nm) laser pulses around individual colloidal particles and small close packed arrays of such particles on silicon substrates. The analysis is presented for particles in air and, for the first time, when immersed in a range of liquid media. Immersion in a liquid allows detailed exploration of the effects on the near field of changing not just the magnitude but also the sign of the refractive index difference between the particle and the host medium. The level of agreement between the results of ray tracing and Mie scattering simulations, and the experimentally observed patterns on solid surfaces, should encourage further modelling, predictions and demonstrations of the rich palette of sub-wavelength surface profiles that can be achieved using colloidal particles immersed in liquids.

Pattern formation on silicon by laser-initiated liquid-assisted colloidal lithography.

We report sub-diffraction limited patterning of Si substrate surfaces by laser-initiated liquid-assisted colloidal lithography. The technique involves exposing a two-dimensional lattice of transparent colloidal particles spin coated on the substrate of interest (here Si) immersed in a liquid (e.g. methanol, acetone, carbon tetrachloride, toluene) to a single picosecond pulse of ultraviolet laser radiation. Surface patterns formed using colloidal particles with different radii in the range 195 nm ≤ R ≤ 1.5 µm and liquids with differing indices of refraction (n(liquid)) are demonstrated, the detailed topographies of which are sensitively dependent upon whether the index of refraction of the colloidal particle (n(colloid)) is greater or smaller than n liquid (i.e. upon whether the incident light converges or diverges upon interaction with the particle). The spatial intensity modulation formed by diffraction of the single laser pulse by the colloidal particles is imprinted into the Si substrate.

3-D patterning of silicon by laser-initiated, liquid-assisted colloidal (LILAC) lithography.

We report a comprehensive study of laser-initiated, liquid-assisted colloidal (LILAC) lithography, and illustrate its utility in patterning silicon substrates. The method combines single shot laser irradiation (frequency doubled Ti-sapphire laser, 50fs pulse duration, 400nm wavelength) and medium-tuned optical near-field effects around arrays of silica colloidal particles to achieve 3-D surface patterning of silicon. A monolayer (or multilayers) of hexagonal close packed silica colloidal particles act as a mask and offer a route to liquid-tuned optical near field enhancement effects. The resulting patterns are shown to depend on the difference in refractive index of the colloidal particles (ncolloid) and the liquid (nliquid) in which they are immersed. Two different topographies are demonstrated experimentally: (a) arrays of bumps, centred beneath the original colloidal particles, when using liquids with nliquidncolloid - and explained with the aid of complementary Mie scattering simulations. The LILAC lithography technique has potential for rapid, large area, organized 3-D patterning of silicon (and related) substrates.

Cell adhesion response on femtosecond laser initiated liquid assisted silicon surface.

Silicon substrates were irradiated at normal incidence with a femtosecond Ti:sapphire laser (Quatronix, 90 fs pulse duration, 1 kHz repetition rate, M(2) ~ 1.2, maximum energy peak 350 mJ ) operating at a wavelength of 400 nm and focused via a microscope objective (Newport; UV Objective Model, 37x 0.11 N.A.). The laser scanning was assisted by liquids precursors media such as methanol and 1,1,2-trichlorotrifluoroethane. By altering the processing parameters, such as incident laser energy, scanning speed, and different irradiation media, various surface structures were produced on areas with 1 mm(2) dimensions. We analyzed the dependence of the surface morphology on laser pulse energy, scanning speed and irradiation media. Well ordered areas are developed without imposing any boundary conditions for the capillary waves that coarsens the ripple pattern. To assess biomaterial-driven cell adhesion response we investigated actin filaments organization and cell morphological changes following growth onto processed silicon substrates. Our study of bone cell progenitor interaction with laser nanoprocessed silicon lines has shown that cells anchor mainly to contact points along the nanostructured surface. Consequently, actin filaments are stretched towards the 15 µm wide parallel lines increasing lateral cell spreading and changing the bipolar shape of mesenchymal stem cells.