Spectroelectrochemical Studies of CTAB Adsorbed on Gold Surfaces in Perchloric Acid.

The behaviour of CTAB adsorbed on polycrystalline gold electrodes has been studied using a combination of spectroelectrochemical methods. The results indicate that the formation of the layer is the consequence of the precipitation of the CTAB micelles on the electrode surface as bromide ions, which stabilize the micelles, are replaced by perchlorate anions. This process leads to the formation of CTA+ layers in which perchlorate ions are intercalated, in which the adlayer suffers a continuous rearrangement that leads to the formation of micro-dominions of different types of hydrogen-bonded water populations throughout the adlayer. After prolonged cycling, a stable situation is reached. Under these conditions, water molecules permeate through the adlayer toward the electrode surface at potentials positive of the potential of zero charge, due to the repulsion between the CTA+ layer and the positive charge of the electrode.

Mobility and Oxidation of Adsorbed CO on Shape-Controlled Pt Nanoparticles in Acidic Medium.

The knowledge about how CO occupies and detaches from specific surface sites on well-structured Pt surfaces provides outstanding information on both dynamics/mobility of COads and oxidation of this molecule under electrochemical conditions. This work reports how the potentiostatic growth of different coverage CO adlayers evolves with time on both cubic and octahedral Pt nanoparticles in acidic medium. Data suggest that during the growth of the CO adlayer, COads molecules slightly shift toward low coordination sites only on octahedral Pt nanoparticles, so that these undercoordinated sites are the first filled on octahedral Pt nanoparticles. Conversely, on cubic Pt nanoparticles, adsorbed CO behaves as an immobile species, and low coordinated sites as well as (100) terraces are apparently filled uniformly and simultaneously. However, once the adlayer is complete, irrespectively of whether the CO is oxidized in a single step or in a sequence of different potential steps, results suggest that COads behaves as an immobile species during its oxidation on both octahedral and cubic Pt nanoparticles.

Synthesis of Pt Nanoparticles in Water-in-Oil Microemulsion: Effect of HCl on Their Surface Structure.

The synthesis of shape-controlled nanoparticles is currently a hot research topic. However, from an applied point of view, there is still a lack of easy, cheap, and scalable methodologies. In this communication we report, for the first time, the synthesis of cubic platinum nanoparticles with a very high yield using a water-in-oil microemulsion method, which unlike others, such as the colloidal method, fulfills the previous requirements. This shape/surface structure control is determined by the concentration of HCl in the water phase of the microemulsion. The results reported here show that the optimal HCl percentage in the water phase is about 25% to obtain the highest amount of cubic nanostructures. Ammonia electro-oxidation is used as a surface structure sensitive reaction to illustrate HCl surface structure effects. Moreover, in situ electrochemical characterization has been performed to study the nanoparticle surface structure.

Synthesis and electrocatalytic properties of H2SO4 -induced (100) Pt nanoparticles prepared in water-in-oil microemulsion.

The increasing number of applications for shape-controlled metal nanoparticles (NPs) has led to the need for easy, cheap, and scalable methodologies. We report the synthesis of (100) preferentially oriented Pt NPs, with a particle size of 9 nm, by using a water-in-oil microemulsion method. The specific surface structure of the NPs is induced by the presence of H(2)SO(4) in the water phase of the microemulsion. Interestingly, the results reported herein show how increasing amounts of H(2)SO(4) lead to the formation of Pt NPs containing a larger amount of (100) sites on their surface. This preferential surface orientation is confirmed electrochemically by using the so-called hydrogen adsorption/desorption process. In addition, transmission electron microscopy measurements confirm the presence of cubic-like Pt NPs. Finally, the electrocatalytic properties of the Pt NPs are evaluated towards ammonia and CO electro-oxidations, which are (100) structure-sensitive reactions.

Formic acid electrooxidation on thallium-decorated shape-controlled platinum nanoparticles: an improvement in electrocatalytic activity.

Thallium modified shape-controlled Pt nanoparticles were prepared and their electrocatalytic activity towards formic acid electrooxidation was evaluated in 0.5 M sulfuric acid. The electrochemical and in situ FTIR spectroscopic results show a remarkable improvement in the electrocatalytic activity, especially in the low potential region (around 0.1-0.2 V vs. RHE). Cubic Pt nanoparticles modified with Tl were found to be more active than the octahedral Pt ones in the entire range of Tl coverages and potential windows. In situ FTIR spectra indicate that the promotional effect produced by Tl results in the inhibition of the poisoning step leading to COads, thus improving the onset potential for the complete formic acid oxidation to CO2. Chronoamperometric experiments were also performed at 0.2 V to evaluate the stability of the electrocatalysts at constant potential. Finally, experiments with different concentrations of formic acid (0.05-1 M) were also carried out. In all cases, Tl-modified cubic Pt nanoparticles result to be the most active. All these facts reinforce the importance of controlling the surface structure of the electrocatalysts to optimize their electrocatalytic properties.

Autonomous electrochemical system for ammonia oxidation reaction measurements at the International Space Station.

An autonomous electrochemical system prototype for ammonia oxidation reaction (AOR) measurements was efficiently done inside a 4'' x 4'' x 8'' 2U Nanoracks module at the International Space Station (ISS). This device, the Ammonia Electrooxidation Lab at the ISS (AELISS), included an autonomous electrochemical system that complied with NASA ISS nondisclosure agreements, power, safety, security, size constrain, and material compatibility established for space missions. The integrated autonomous electrochemical system was tested on-ground and deployed to the International Space Station as a "proof-of-concept" ammonia oxidation reaction testing space device. Here are discussed the results of cyclic voltammetry and chronoamperometry measurements done at the ISS with a commercially available channel flow-cell with eight screen-printed electrodes, including Ag quasi-reference (Ag QRE) and carbon counter electrodes. Pt nanocubes in Carbon Vulcan XC-72R were used as the catalyst for the AOR and 2 µL drop of Pt nanocubes/ Carbon Vulcan XC-72R, 20 wt%, ink was placed on the carbon working electrodes and allowed to dry in air. After the AELISS was prepared for launch to the ISS, a 4 days delayed (2 days in the space vehicle Antares and 2 days space transit to the ISS) cause a slight shift on the Ag QRE potential. Nevertheless, the AOR cyclic voltametric peak was observed in the ISS and showed ca. 70% current density decrease due to the buoyancy effect in agreement with previous microgravity experiments done at the zero-g aircraft.

Shape-dependent electrocatalysis: formic acid electrooxidation on cubic Pd nanoparticles.

The electrocatalytic properties of palladium nanocubes towards the electrochemical oxidation of formic acid were studied in H(2)SO(4) and HClO(4) solutions and compared with those of spherical Pd nanoparticles. The spherical and cubic Pd nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The intrinsic electrocatalytic properties of both nanoparticles were shown to be strongly dependent on the amount of metal deposited on the gold substrate. Thus, to properly compare the activity of both systems (spheres and nanocubes), the amount of sample has to be optimized to avoid problems due to a lower diffusion flux of reactants in the internal parts of the catalyst layer resulting in a lower apparent activity. Under the optimized conditions, the activity of the spheres and nanocubes was very similar between 0.1 and 0.35 V. From this potential value, the activity of the Pd nanocubes was remarkably higher. This enhanced electrocatalytic activity was attributed to the prevalence of Pd(100) facets in agreement with previous studies with Pd single crystal electrodes. The effect of HSO(4)(-)/SO(4)(2-) desorption-adsorption was also evaluated. The activity found in HClO(4) was significantly higher than that obtained in H(2)SO(4) in the whole potential range.

Investigating the presence of adsorbed species on Pt steps at low potentials.

The study of the OH adsorption process on Pt single crystals is of paramount importance since this adsorbed species is considered the main intermediate in many electrochemical reactions of interest, in particular, those oxidation reactions that require a source of oxygen. So far, it is frequently assumed that the OH adsorption on Pt only takes place at potentials higher than 0.55 V (versus the reversible hydrogen electrode), regardless of the Pt surface structure. However, by CO displacement experiments, alternating current voltammetry, and Raman spectroscopy, we demonstrate here that OH is adsorbed at more negative potentials on the low coordinated Pt atoms, the Pt steps. This finding opens a new door in the mechanistic study of many relevant electrochemical reactions, leading to a better understanding that, ultimately, can be essential to reach the final goal of obtaining improved catalysts for electrochemical applications of technological interest.

Significantly enhancing catalytic activity of tetrahexahedral Pt nanocrystals by Bi adatom decoration.

Tetrahexahedral Pt nanocrystals (THH Pt NCs) bounded by high-index facets possess a high density of active sites and display therefore a higher catalytic activity in comparison with those enclosed by low-index facets. In the current communication, we report, for the first time, the decoration of THH Pt NC surfaces by using Bi adatoms and have demonstrated that the catalytic activity of the Bi decorated THH Pt NCs toward HCOOH electrooxidation has been drastically enhanced in comparison with bare THH Pt NCs. It has also been revealed that the catalytic activity of Bi decorated THH Pt NCs for all coverages investigated always exhibits a higher catalytic activity that is about double that of Bi decorated Pt nanospheres. The study is of great importance regarding both fundamentals and applications.

Imaging structure sensitive catalysis on different shape-controlled platinum nanoparticles.

The structure sensitive catalytic activity for oxygen reduction reaction (ORR) on shape-controlled Pt nanoparticles (NPs) is directly imaged using scanning electrochemical microscopy (SECM). We synthesize and compare four types of Pt NPs: spherical, cubic, hexagonal, and tetrahedral-octahedral. Our SECM images show the hexagonal Pt NPs displaying the highest activity for ORR in two acid electrolytes. Meanwhile, cubic and tetrahedral-octahedral NPs drastically change their activity depending on specific adsorption of the different anions in solution. The NPs morphology produces predominant crystallographic planes at the surface of these shape-controlled Pt NPs, which are responsible for their different catalytic activity. Our results translate the studies on Pt single crystal electrodes present in the literature into Pt NPs that are useful as a catalyst in real fuel cells.

Surface Structure Characterization of Shape and Size Controlled Pd Nanoparticles by Cu UPD: A Quantitative Approach.

The search for new surface sensitive probes that characterize the surface structure of shape and size-controlled nanoparticles is an interesting topic to properly understand the correlations between electrocatalytic properties and surface structure at the nanoscale. Herein, we report the use of Cu UPD to characterize, not only qualitatively but also quantitatively, the surface structure of different Pd nanoparticles with controlled particle shape and size. Thus, Pd nanoparticles with cubic, octahedral and rhombic dodecahedral shapes, that is, with preferential {100}, {111}, and {110} surface structures, respectively, were prepared. In addition, cubic Pd nanoparticles with different particles sizes and spherical (2-3 nm) Pd nanoparticles were also synthesized. Based on the Cu UPD results on Pd single crystals, a new approach is proposed to qualitatively and quantitatively determine the percentages of {100}, {111}, and {110} surface domains present at the surface of the different shape and size controlled Pd nanoparticles. The results reported clearly show the benefits of this Cu UPD to get detailed information of the surface structure of the nanoparticles according to their particle shape and size.

Ammonia selective oxidation on Pt(100) sites in an alkaline medium.

The oxidation of ammonia on platinum surfaces is a structure sensitive reaction that takes place almost exclusively on Pt(100) sites. This report shows how dependent the activity is on different arrangements of (100) sites of platinum. The effect of two-dimensional domains has been addressed by using stepped surfaces having terraces with (100) geometry, either with (111) and (110) steps. The results were compared with those obtained from stepped surfaces having terraces with (111) or (110) symmetry and monatomic (100) steps, thus representing monodimensional (100) domains. The observed behavior confirms the extreme sensitivity of the reaction to the different arrangement of this type of square sites.

Formic acid electrooxidation on Bi-modified polyoriented and preferential (111) Pt nanoparticles.

Formic acid electrooxidation was studied on Bi modified polyoriented and preferential (111) Pt nanoparticles. For both types of nanoparticles, Bi coverage was progressively increased and its effect on formic acid electrooxidation was evaluated using cyclic voltammetry and chronoamperometric measurements. In both experiments, significant and progressive enhancements on the electrooxidation current densities were obtained in comparison to the bare Pt nanoparticles. In voltammetry, at maximum Bi coverage, higher current densities at peak potential were obtained with the preferential (111) Pt nanoparticles (approximately 42 mA cm(-2)) as compared to the polyoriented Pt nanoparticles (approximately 32 mA cm(-2)) in agreement with previous single crystal studies. Nevertheless, this tendency was not observed in chronoamperometry at 0.4 V where currents obtained at maximum Bi coverage were similar. On the other hand, CO poison formation was also evaluated at open circuit potential. The resulting electrochemical activity has been rationalized using different parameters, such as surface structure, size domains, particle size and Bi coverage.

Determination of (111) ordered domains on platinum electrodes by irreversible adsorption of bismuth.

Irreversible adsorbed bismuth can be used to determine the fraction of (111) domains on a given platinum sample. On Pt(111) electrodes, the surface redox process of adsorbed bismuth takes place at 0.63 V in a well-defined peak. The behavior of this redox process on the Pt(111) vicinal surfaces indicates that the bismuth atoms involved in the redox process are only those deposited on the (111) terrace sites and that the charge under the peak at 0.63 V is directly proportional to the number of sites on (111) ordered domains (terraces). The good linear relationship obtained between the charge for the bismuth redox process and the number of (111) terrace sites on the vicinal surfaces allows construction of a calibration curve. This calibration curve has been used to directly estimate the amount of (111) ordered domain terrace sites on polycrystalline platinum samples with different surface ordered domains. The results agree with what we would expect from our knowledge of these surfaces.