Emerging Monkeypox Virus Sublineage C.1 Causing Community Transmission, Vietnam, 2023.

We studied a community cluster of 25 mpox cases in Vietnam caused by emerging monkeypox virus sublineage C.1 and imported into Vietnam through 2 independent events; 1 major cluster carried a novel APOBEC3-like mutation. Three patients died; all had advanced HIV co-infection. Viral evolution and its potential consequences should be closely monitored.

A Comparison of Venaseal Versus Radiofrequency Ablation Outcomes Within a Managed Care Organization.

BACKGROUND: Chronic venous insufficiency is a common medical condition that afflicts over 30 million adults in the United States. Treatment and management have changed dramatically over the past 20 years with the introduction of various endovenous therapies, including radiofrequency ablation (RFA) and cyanoacrylate closure using the Venaseal system. In this study, we explore a direct comparison of outcomes between RFA and VenaSeal conducted by a single surgeon within a managed care organization. METHODS: Between May 2020 and December 2021, there were 87 patients undergoing 97 total procedures who were treated with either VenaSeal (n = 55) or RFA (n = 42), conducted by a single surgeon within a managed care organization. Primary outcomes included successful greater saphenous vein (GSV) closure, postoperative deep vein thrombosis (DVT), embolization, saphenofemoral junction (SFJ) thrombosis, skin reaction (allergic or thrombophlebitis), or procedure-related emergency room (ER) and urgent care (UC) visits. Retrospective chart review was conducted to describe patient demographics, indications for treatment, treatment details (number of access sites and indication for treatment), as well as follow-up adjunctive vein procedures (sclerotherapy and stab phlebectomy). RESULTS: All patients had postprocedural ultrasound (US) performed within 7 days by the operating surgeon and mean overall patient follow-up from index procedure was 12 months; 2 patients were lost to follow-up due to death. All operations utilized intraoperative US, and SFJ thrombosis was not observed in any patient postprocedure. The average age of VenaSeal and RFA groups was 59.05 and 59.51 years, respectively. The average number of access sites during the procedure for VenaSeal and RFA was 1.56 and 1.20, respectively. Of the 55 VenaSeal treatments, 9.1% of patients reported postoperative skin reactions, and 9.1% of patients underwent subsequent stab phlebectomy (22 stabs on average). Of the 42 RFA treatments, 7.1% of RFA patients reported postoperative skin reactions, and 9.5% underwent subsequent stab phlebectomy (36 stabs on average). The percentage of patients who had postoperative UC or emergency department visits related to the procedure in the VenaSeal and RFA groups was 3.6% and 0%, respectively. CONCLUSIONS: Both VenaSeal and RFA demonstrated effective vein closure of the GSV at 12-month follow-up, with VenaSeal demonstrating continued noninferiority to RFA. Based on our data, postoperative skin reactions do not appear to be significantly higher with VenaSeal treatment, as previously reported.

Lingual bracket transfer accuracy of double vacuum-formed indirect bonding tray using 3D-printed model: an in vivo study.

INTRODUCTION: This study aimed to assess the transfer accuracy of a digital indirect bonding method for lingual brackets using double vacuum-formed trays in vivo. METHODS: Twenty-five patients in need of lingual orthodontic treatment were consecutively recruited. Bracket placement was performed on ideal setups, followed by fabricating indirect bonding trays through vacuum-forming on 3-dimensional printed models. Transfer accuracy was measured at each bracket after superimpositions of postbonding scans and reference data. One-tailed t tests were used to determine whether bracket deviations were within the limit of 0.5 mm and 2° for linear and angular dimensions, respectively. RESULTS: A total of 611 lingual brackets were evaluated. Mean linear transfer errors were 0.06 mm, 0.09 mm, and 0.12 mm, with frequencies of deviations within the 0.5 mm limit of 99.7%, 99.8%, and 98.0% for mesiodistal, buccolingual, and occlusogingival dimensions, respectively. Regarding angular measurements, mean transfer errors were 1.28°, 1.73°, and 2.96°, with frequencies of deviations within the 2° limit of 81.0%, 68.9%, and 51.1% for rotation, tip, and torque, respectively. Mean errors fell within the clinically accepted limits for all linear dimensions and rotation but exceeded the limit for tip and torque. CONCLUSIONS: Lingual bracket indirect bonding using double vacuum-formed trays fabricated on 3-dimensional printed models has high transfer accuracy in the mesiodistal, buccolingual, and occlusogingival dimensions and rotation. However, the transfer of tip and torque is less accurate.

Monkeypox Virus Infection in 2 Female Travelers Returning to Vietnam from Dubai, United Arab Emirates, 2022.

Mpox was diagnosed in 2 women returning to Vietnam from the United Arab Emirates. The monkeypox viruses belonged to an emerging sublineage, A.2.1, distinct from B.1, which is responsible for the ongoing multicountry outbreak. Women could contribute to mpox transmission, and enhanced genomic surveillance is needed to clarify pathogen evolution.

An Update on the Progress of Isolation, Culture, Storage, and Clinical Application of Human Bone Marrow Mesenchymal Stem/Stromal Cells.

Bone marrow mesenchymal stem/stromal cells (BMSCs), which are known as multipotent cells, are widely used in the treatment of various diseases via their self-renewable, differentiation, and immunomodulatory properties. In-vitro and in-vivo studies have supported the understanding mechanisms, safety, and efficacy of BMSCs therapy in clinical applications. The number of clinical trials in phase I/II is accelerating; however, they are limited in the size of subjects, regulations, and standards for the preparation and transportation and administration of BMSCs, leading to inconsistency in the input and outcome of the therapy. Based on the International Society for Cellular Therapy guidelines, the characterization, isolation, cultivation, differentiation, and applications can be optimized and standardized, which are compliant with good manufacturing practice requirements to produce clinical-grade preparation of BMSCs. This review highlights and updates on the progress of production, as well as provides further challenges in the studies of BMSCs, for the approval of BMSCs widely in clinical application.

Zoonotic diseases from birds to humans in Vietnam: possible diseases and their associated risk factors.

In recent decades, exceeding 60% of infectious cases in human beings are originated from pathogenic agents related to feral or companion animals. This figure continues to swiftly increase due to excessive exposure between human and contaminated hosts by means of applying unhygienic farming practices throughout society. In Asia countries-renowned for lax regulation towards animal-trading markets-have experienced tremendous outbreaks of zoonotic diseases every year. Meanwhile, various epidemic surges were first reported in the residential area of China-one of the largest distributor of all animal products on the planet. Some noticeable illnesses comprising of A/H5N1 or H7N9-known as avian influenza which transmitted from poultry and also wild birds-have caused inevitable disquiet among inhabitants. Indeed, poultry farming industry in China has witnessed dynamic evolution for the past two decades, both in quantity and degree of output per individual. Together with this pervasive expansion, zoonotic diseases from poultry have incessantly emerged as a latent threat to the surrounding residents in entire Asia and also European countries. Without strict exporting legislation, Vietnam is now facing the serious problem in terms of poultry distribution between the two countries' border. Even though several disease investigations have been conducted by many researchers, the disease epidemiology or transmission methods among people remained blurred and need to be further elucidated. In this paper, our aim is to provide a laconic review of common zoonotic diseases spread in Vietnam, outstanding cases and several factors predisposing to this alarming situation.

Zika virus in Vietnam, Laos, and Cambodia: are there health risks for travelers?

Vietnam, Laos, and Cambodia have reported first cases of Zika virus (ZIKV) infection since 2010 (Cambodia) and 2016 (Vietnam and Laos). One case of ZIKV-related microcephaly was recognized among a hundred infected cases in these areas, raising a great concern about the health risk related to this virus infection. At least 5 cases of ZIKV infection among travelers to Vietnam, Laos, and Cambodia were recorded. It is noticeable that ZIKV in these areas can cause birth defects. This work aims to discuss the current epidemics of ZIKV in Vietnam, Laos, and Cambodia and update the infection risk of ZIKV for travelers to these areas.

The possible zoonotic diseases transferring from pig to human in Vietnam.

Southeast Asia is considered one of worldwide hotspots consisting many distinct zoonotic infections. With optimal condition for the development of various pathogens, Vietnam is facing serious risks of zoonotic diseases. Besides, more than 50% Vietnamese people settle in rustic areas and earn their livings through small-scale animal breeding. It is possible that zoonotic diseases can be easily spread to the population by close contact with the infected animals, their infected residues, contaminated water, soil, or other possible means of transmission. In fact, zoonotic infections-transmissible infections between vertebrate animals and humans-cover a wide range of diseases with distinctive clinical and epidemiological highlights. With insufficient understanding and swift alteration in toxicity of the pathogens, these infections have gained more concerns due to sophisticated routes of transmission and harmful threats to humans. Recently emerging viral diseases exerted potential dangers to human beings, which required many countries to impose immediate actions to prevent any complications. Vietnam has recorded several cases of zoonotic diseases, especially pig-related illnesses; however, the studies on these diseases in this country remain limited. This work aims to highlight the zoonotic diseases transferring from pigs to humans and discuss risk factors of these diseases in Vietnam.

The higher prevalence of developmental defects of enamel in the dioxin-affected region than non-dioxin-affected region: result from a cross-sectional study in Vietnam.

Developmental defects of enamel (DDE) are induced and regulated by several factors including genetics and the environment. There is evidence showing that dioxin in polluted areas has a strong effect on the health and development of teeth. However, there has been no study on DDE in the dioxin-affected regions in Vietnam. To identify the effect of dioxin on the prevalence of DDE in studied areas in Vietnam, a cross-sectional study was conducted in 2200 adults in the A Luoi district in the Thua Thien Hue province (the dioxin-affected region) and in the Kim Bang district in the Ha Nam province (dioxin-unaffected region) in 2015. All subjects were interviewed using a structured questionnaire and their teeth were examined and scored for enamel defects based on the 1992 FDI criteria. The defected teeth were then photographed. Our results showed that the DDE rate in A Luoi was 20.5% when measured as mouth prevalence and 5.8% when measured as tooth prevalence, while the rates in Kim Bang were 10.4 and 2.32% for mouth and tooth prevalence, respectively. Demarcated opacities were predominated in both districts (45.5% in A Luoi and 52.2% in Kim Bang). The DDE rate of the anterior teeth group was higher than that of the posterior teeth group. Most lesions presented on the buccal surface of the tooth. Overall, the DDE prevalence in the dioxin-affected region was 2.2 times higher than that in non-dioxin-affected region in the studied regions in Vietnam.

An Update on Anti-CD137 Antibodies in Immunotherapies for Cancer.

The selective expression of CD137 on cells of the immune system (e.g., T and DC cells) and oncogenic cells in several types of cancer leads this molecule to be an attractive target to discover cancer immunotherapy. Therefore, specific antibodies against CD137 are being studied and developed aiming to activate and enhance anti-cancer immune responses as well as suppress oncogenic cells. Accumulating evidence suggests that anti-CD137 antibodies can be used separately to prevent tumor in some cases, while in other cases, these antibodies need to be co-administered with other antibodies or drugs/vaccines/regents for a better performance. Thus, in this work, we aim to update and discuss current knowledge about anti-cancer effects of anti-CD137 antibodies as mono- and combined-immunotherapies.

Physical origins of temperature continuity at an interface between a crystal and its melt.

We justify and discuss the physical origins for the assumption of temperature continuity at crystal/melt interfaces by performing atomistic simulations. We additionally answer why the crystal/melt interfaces differ from the typical solid/liquid interfaces, which usually exhibit dissimilarities and a resulting temperature drop. We present results for pure silver modeled using the embedded-atom method and Lennard-Jones potential function and contrast the results with each other. We find that the temperature continuity at an interface between a crystal and its melt originates from the perfect vibrational coupling, which is caused by the interfacial structural diffusivity. This study provides fundamental insights into the heat transfer for cases of extremely large heat flux and thermal gradients occurring during rapid melting and solidification. The findings additionally determine the role of rough surfaces in manipulating the thermal conductance in nanodevices.

Zika virus infection in Vietnam: current epidemic, strain origin, spreading risk, and perspective.

Zika virus infection and its associated microcephaly have being receiving global concern. This infection has spread widely since the first outbreak was recorded in Africa in 1952. Now, it has been reported in over 70 countries on five continents including Africa, North and South America, Asia, and Europe. Vietnam is one of the most recent countries which had cases of Zika virus infection at the end of 2016. This country has also reported the first case of a microcephaly-born baby which was probably linked to Zika virus infection. However, information on the Zika virus epidemic in Vietnam is still limited. This brief report intends to update the current Zika virus epidemic, and to discuss challenges and perspectives in controlling this infection in Vietnam.

Atomic density effects on temperature characteristics and thermal transport at grain boundaries through a proper bin size selection.

This study focuses on the proper characterization of temperature profiles across grain boundaries (GBs) in order to calculate the correct interfacial thermal resistance (ITR) and reveal the influence of GB geometries onto thermal transport. The solid-solid interfaces resulting from the orientation difference between the (001), (011), and (111) copper surfaces were investigated. Temperature discontinuities were observed at the boundary of grains due to the phonon mismatch, phonon backscattering, and atomic forces between dissimilar structures at the GBs. We observed that the temperature decreases gradually in the GB area rather than a sharp drop at the interface. As a result, three distinct temperature gradients developed at the GB which were different than the one observed in the bulk solid. This behavior extends a couple molecular diameters into both sides of the interface where we defined a thickness at GB based on the measured temperature profiles for characterization. Results showed dependence on the selection of the bin size used to average the temperature data from the molecular dynamics system. The bin size on the order of the crystal layer spacing was found to present an accurate temperature profile through the GB. We further calculated the GB thickness of various cases by using potential energy (PE) distributions which showed agreement with direct measurements from the temperature profile and validated the proper binning. The variation of grain crystal orientation developed different molecular densities which were characterized by the average atomic surface density (ASD) definition. Our results revealed that the ASD is the primary factor affecting the structural disorders and heat transfer at the solid-solid interfaces. Using a system in which the planes are highly close-packed can enhance the probability of interactions and the degree of overlap between vibrational density of states (VDOS) of atoms forming at interfaces, leading to a reduced ITR. Thus, an accurate understanding of thermal characteristics at the GB can be formulated by selecting a proper bin size.

A Dataset of apical periodontitis lesions in panoramic radiographs for deep-learning-based classification and detection.

Deep learning has been studied in recent years to identify periapical lesions- a significant indicator of periapical periodontitis in radiographs. An accurate dataset is essential for constructing an efficient learning model for detecting periapical lesions. In order to achieve this goal, we gathered and created a database of panoramic radiographs containing periapical lesions from the High-quality Dental Treatment Centre, School of Dentistry, Hanoi Medical University, between January 2016 and March 2021. Out of 16,519 radiographs, three experienced dentists identified 3,926 images of periapical lesions and annotated those lesions based on the Periapical Lesions Classification. By applying well-known data processing techniques (e.g. scaling, mirroring, and flipping), the amount of data is increased to 17,004 images through generating additional images for machine learning. The dataset has three folders: one for the original photos, one for the post-augmentation images, and the rest for the annotation of periapical lesions. The information could assist researchers in developing a predictive machine model for detecting periapical lesions in radiographs.

Engineering high-valence metal-enriched cobalt oxyhydroxide catalysts for an enhanced OER under near-neutral pH conditions.

Understanding water splitting in pH-neutral media has important implications for hydrogen production from seawater. Despite their significance, electrochemical water oxidation and reduction in neutral electrolytes still face great challenges. This study focuses on designing efficient electrocatalysts capable of promoting the oxygen evolution reaction (OER) in neutral media by incorporating high-valence elements into transition-metal hydroxides. The as-prepared and optimized two-dimensional Mo-Co(OH)2 nanosheets, which undergo operando transformation into oxyhydroxide active species, demonstrated an overpotential of 550 mV at 10 mA cm-2 with a Tafel slope of 110.1 mV dec-1 in 0.5 M KHCO3. In situ X-ray absorption spectroscopy revealed that the incorporation of high-valence elements facilitates the generation of CoOOH active sites at low potential and enhances electron transfer kinetics by altering the electronic environment of the Co center. This study offers new insights for developing more efficient OER electrocatalysts and provides fresh ideas for seawater utilization through the study of the reaction mechanism of the near-neutral-pH OER.

Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques.

Purpose: The improvement of computer-aided design and computer-aided manufacturing (CAD/CAM) has changed the methods of fabricating laminate veneers. The objectives of this study were to evaluate the marginal and internal fit of ceramic veneers manufactured with different CAD/CAM techniques. Materials and methods: A metal die was made by copying a prepared plastic maxillary central right incisor and scanned for designing a laminate veneer. One hundred laminate veneers were made with four different CAD/CAM techniques (n=25), including milled lithium disilicate (MLD), heat-pressed lithium disilicate with 3-dimensional (3D) printed wax patterns (PLD), milled zirconia (MZ), and 3Dprinted zirconia (PZ). The virtual marginal and internal fit of fabricated veneers was evaluated with digital crown fitting software. The actual marginal and internal fit was measured with the silicone replica method under a digital microscope. The measured data were analyzed using the one-way analysis of variance and the Turkey test. Results: There were significant differences in marginal and internal fit (P < 0.001) among manufacturing techniques. Both the virtual and actual marginal and internal gaps were higher in the PLD and PZ groups compared to the MLD and MZ groups. Conclusion: All four CAD/CAM techniques of manufacturing veneers, that is, milled lithium disilicate, heat-pressed lithium disilicate with 3D-printed wax patterns, milled zirconia, and 3D-printed zirconia, have clinically acceptable marginal and internal fit. Milled zirconia and lithium disilicate veneers demonstrated superior marginal and internal fit compared to 3D-printed zirconia and heat-pressed lithium disilicate veneers with 3D-printed wax patterns.

Hippo pathway-mediated YAP1/TAZ inhibition is essential for proper pancreatic endocrine specification and differentiation.

The Hippo pathway plays a central role in tissue development and homeostasis. However, the function of Hippo in pancreatic endocrine development remains obscure. Here, we generated novel conditional genetically engineered mouse models to examine the roles of Hippo pathway-mediated YAP1/TAZ inhibition in the development stages of endocrine specification and differentiation. While YAP1 protein was localized to the nuclei in bipotent progenitor cells, Neurogenin 3 expressing endocrine progenitors completely lost YAP1 expression. Using genetically engineered mouse models, we found that inactivation of YAP1 requires both an intact Hippo pathway and Neurogenin 3 protein. Gene deletion of Lats1 and 2 kinases (Lats1&2) in endocrine progenitor cells of developing mouse pancreas using Neurog3Cre blocked endocrine progenitor cell differentiation and specification, resulting in reduced islets size and a disorganized pancreas at birth. Loss of Lats1&2 in Neurogenin 3 expressing cells activated YAP1/TAZ transcriptional activity and recruited macrophages to the developing pancreas. These defects were rescued by deletion of Yap1/Wwtr1 genes, suggesting that tight regulation of YAP1/TAZ by Hippo signaling is crucial for pancreatic endocrine specification. In contrast, deletion of Lats1&2 using ß-cell-specific Ins1CreER resulted in a phenotypically normal pancreas, indicating that Lats1&2 are indispensable for differentiation of endocrine progenitors but not for that of ß-cells. Our results demonstrate that loss of YAP1/TAZ expression in the pancreatic endocrine compartment is not a passive consequence of endocrine specification. Rather, Hippo pathway-mediated inhibition of YAP1/TAZ in endocrine progenitors is a prerequisite for endocrine specification and differentiation.

Comparing the accuracy of two machine learning models in detection and classification of periapical lesions using periapical radiographs.

BACKGROUND: Previous deep learning-based studies were mainly conducted on detecting periapical lesions; limited information in classification, such as the periapical index (PAI) scoring system, is available. The study aimed to apply two deep learning models, Faster R-CNN and YOLOv4, in detecting and classifying periapical lesions using the PAI score from periapical radiographs (PR) in three different regions of the dental arch: anterior teeth, premolars, and molars. METHODS: Out of 2658 PR selected for the study, 2122 PR were used for training, 268 PR were used for validation and 268 PR were used for testing. The diagnosis made by experienced dentists was used as the reference diagnosis. RESULTS: The Faster R-CNN and YOLOv4 models obtained great sensitivity, specificity, accuracy, and precision for detecting periapical lesions. No clear difference in the performance of both models among these three regions was found. The true prediction of Faster R-CNN was 89%, 83.01% and 91.84% for PAI 3, PAI 4 and PAI 5 lesions, respectively. The corresponding values of YOLOv4 were 68.06%, 50.94%, and 65.31%. CONCLUSIONS: Our study demonstrated the potential of YOLOv4 and Faster R-CNN models for detecting and classifying periapical lesions based on the PAI scoring system using periapical radiographs.

Effectiveness of resin infiltration in the management of anterior teeth affected by molar incisor hypomineralisation (MIH): A systematic review and meta-analysis.

OBJECTIVES: To evaluate the effectiveness of resin infiltration in improving the aesthetic appearance of anterior teeth affected by molar-incisor hypomineralisation (MIH). DATA SOURCES: PubMed, Scopus, EMBASE, Web of Science, ScienceDirect, and Cochrane Central Register of Controlled Trials (CENTRAL) were searched from 2009 to 2024. The protocol was registered in the International Prospective Database of Systematic Reviews (PROSPERO CRD42023461909). STUDY SELECTION: Interventional or comparative studies comparing resin infiltration and other treatments in MIH-affected anterior teeth were included. The risk of bias was evaluated using the Risk Of Bias In Non-randomised Studies of Interventions (ROBINS-I tool) and the Risk of Bias 2 (RoB 2.0) tool. Meta-analysis utilized a random-effects model. DATA: Eighteen studies met the inclusion criteria, and twelve were included in the meta-analysis. Resin infiltration showed a higher color difference (ΔE) before and after treatment (mean difference 2.21, 95 % confidence interval [CI] 0.04-4.38, p < 0.001, I2 = 98.61 %, p < 0.001) and better optical improvement (standardised mean difference [SMD] 2.68; 95 %CI 0.30-5.06; p = 0.027, I2 = 97.8 %, p < 0.001) compared to controls. The estimated success rate based on dentist assessment was 92 % (95 %CI 88-95 %, I2 = 17.92 %, p = 0.06). Non-randomised trials showed high (8/14) or moderate (6/14) risk of bias, mainly from confounding and selection issues. Randomised trials had high risk (1/3) or some concerns (2/3) due to missing data. CONCLUSIONS: The findings suggest that resin infiltration significantly improves aesthetic outcomes in MIH-affected anterior teeth, as evidenced by higher colour difference and optical improvement compared to controls. CLINICAL SIGNIFICANCE: While our study shows promising results for resin infiltration, including high success rates and aesthetic improvements, larger-scale studies with longer follow-up periods are necessary to confirm these findings and assess its long-term efficacy.