Stable kinetochore-microtubule attachment requires loop-dependent Ndc80-Ndc80 binding.

During cell division, kinetochores link chromosomes to spindle microtubules. The Ndc80 complex, a crucial microtubule binder, populates each kinetochore with dozens of copies. Whether adjacent Ndc80 complexes cooperate to promote microtubule binding remains unclear. Here we demonstrate that the Ndc80 loop, a short sequence that interrupts the Ndc80 coiled-coil at a conserved position, folds into a more rigid structure than previously assumed and promotes direct interactions between full-length Ndc80 complexes on microtubules. Mutations in the loop impair these Ndc80-Ndc80 interactions, prevent the formation of force-resistant kinetochore-microtubule attachments, and cause cells to arrest in mitosis for hours. This arrest is not due to an inability to recruit the kinetochore-microtubule stabilizing SKA complex and cannot be overridden by mutations in the Ndc80 tail that strengthen microtubule attachment. Thus, loop-mediated organization of adjacent Ndc80 complexes is crucial for stable end-on kinetochore-microtubule attachment and spindle assembly checkpoint satisfaction.

Estimation of microtubule-generated forces using a DNA origami nanospring.

Microtubules are dynamic cytoskeletal filaments that can generate forces when polymerizing and depolymerizing. Proteins that follow growing or shortening microtubule ends and couple forces to cargo movement are important for a wide range of cellular processes. Quantifying these forces and the composition of protein complexes at dynamic microtubule ends is challenging and requires sophisticated instrumentation. Here, we present an experimental approach to estimate microtubule-generated forces through the extension of a fluorescent spring-shaped DNA origami molecule. Optical readout of the spring extension enables recording of force production simultaneously with single-molecule fluorescence of proteins getting recruited to the site of force generation. DNA nanosprings enable multiplexing of force measurements and only require a fluorescence microscope and basic laboratory equipment. We validate the performance of DNA nanosprings against results obtained using optical trapping. Finally, we demonstrate the use of the nanospring to study proteins that couple microtubule growth and shortening to force generation.

Cross-linkers at growing microtubule ends generate forces that drive actin transport.

SignificanceComplex cellular processes such as cell migration require coordinated remodeling of both the actin and the microtubule cytoskeleton. The two networks for instance exert forces on each other via active motor proteins. Here we show that, surprisingly, coupling via passive cross-linkers can also result in force generation. We specifically study the transport of actin filaments by growing microtubule ends. We show by cell-free reconstitution experiments, computer simulations, and theoretical modeling that this transport is driven by the affinity of the cross-linker for the chemically distinct microtubule tip region. Our work predicts that growing microtubules could potentially rapidly relocate newly nucleated actin filaments to the leading edge of the cell and thus boost migration.

Fibrils connect microtubule tips with kinetochores: a mechanism to couple tubulin dynamics to chromosome motion.

Kinetochores of mitotic chromosomes are coupled to spindle microtubules in ways that allow the energy from tubulin dynamics to drive chromosome motion. Most kinetochore-associated microtubule ends display curving "protofilaments," strands of tubulin dimers that bend away from the microtubule axis. Both a kinetochore "plate" and an encircling, ring-shaped protein complex have been proposed to link protofilament bending to poleward chromosome motion. Here we show by electron tomography that slender fibrils connect curved protofilaments directly to the inner kinetochore. Fibril-protofilament associations correlate with a local straightening of the flared protofilaments. Theoretical analysis reveals that protofilament-fibril connections would be efficient couplers for chromosome motion, and experimental work on two very different kinetochore components suggests that filamentous proteins can couple shortening microtubules to cargo movements. These analyses define a ring-independent mechanism for harnessing microtubule dynamics directly to chromosome movement.

Properties of Degradable Polyhydroxyalkanoates Synthesized from New Waste Fish Oils (WFOs).

The synthesis of PHA was first investigated using WFOs obtained from smoked-sprat heads, substandard fresh sprats, and fresh mackerel heads and backbones. All the WFOs ensured the growth of the wild-type strain Cupriavidus necator B-10646 and the synthesis of PHA, regardless of the degree of lipid saturation (from 0.52 to 0.65) and the set and ratio of fatty acids (FA), which was represented by acids with chain lengths from C14 to C24. The bacterial biomass concentration and PHA synthesis were comparable (4.1-4.6 g/L and about 70%) when using WFO obtained from smoked-sprat heads and fresh mackerel, and it was twice as high as the bacterial biomass concentration from the fresh sprat waste. This depended on the type of WFO, the bacteria synthesized P(3HB) homopolymer or P(3HB-co-3HV-co-3HHx) copolymer, which had a lower degree of crystallinity (Cx 71%) and a lower molecular weight (Mn 134 kDa) compared to the P(3HB) (Mn 175-209 kDa and Cx 74-78%) at comparable temperatures (Tmelt and Tdegr of 158-168 °C and 261-284 °C, respectively). The new types of WFO, studied for the first time, are suitable as a carbon substrates for PHA synthesis. The WFOs obtained in the production of canned Baltic sprat and Baltic mackerel can be considered a promising and renewable substrate for PHA biosynthesis.

Hybrid Silver-Containing Materials Based on Various Forms of Bacterial Cellulose: Synthesis, Structure, and Biological Activity.

Sustained interest in the use of renewable resources for the production of medical materials has stimulated research on bacterial cellulose (BC) and nanocomposites based on it. New Ag-containing nanocomposites were obtained by modifying various forms of BC with Ag nanoparticles prepared by metal-vapor synthesis (MVS). Bacterial cellulose was obtained in the form of films (BCF) and spherical BC beads (SBCB) by the Gluconacetobacter hansenii GH-1/2008 strain under static and dynamic conditions. The Ag nanoparticles synthesized in 2-propanol were incorporated into the polymer matrix using metal-containing organosol. MVS is based on the interaction of extremely reactive atomic metals formed by evaporation in vacuum at a pressure of 10-2 Pa with organic substances during their co-condensation on the cooled walls of a reaction vessel. The composition, structure, and electronic state of the metal in the materials were characterized by transmission and scanning electron microscopy (TEM, SEM), powder X-ray diffraction (XRD), small-angle X-ray scattering (SAXS) and X-ray photoelectron spectroscopy (XPS). Since antimicrobial activity is largely determined by the surface composition, much attention was paid to studying its properties by XPS, a surface-sensitive method, at a sampling depth about 10 nm. C 1s and O 1s spectra were analyzed self-consistently. XPS C 1s spectra of the original and Ag-containing celluloses showed an increase in the intensity of the C-C/C-H groups in the latter, which are associated with carbon shell surrounding metal in Ag nanoparticles (Ag NPs). The size effect observed in Ag 3d spectra evidenced on a large proportion of silver nanoparticles with a size of less than 3 nm in the near-surface region. Ag NPs in the BC films and spherical beads were mainly in the zerovalent state. BC-based nanocomposites with Ag nanoparticles exhibited antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, Escherichia coli bacteria and Candida albicans and Aspergillus niger fungi. It was found that AgNPs/SBCB nanocomposites are more active than Ag NPs/BCF samples, especially against Candida albicans and Aspergillus niger fungi. These results increase the possibility of their medical application.

Hexakis-2-(ß-carboxyethenylphenoxy)cyclotriphosphazene: Synthesis, Properties, Modeling Structure.

Condensation of hexakis-2-(formylphenoxy)cyclotriphosphazene with malonic acid yielded hexakis-2-(ß-carboxyethenylphenoxy)cyclotriphosphazene (2-CEPP), whose structure was confirmed by 31P, 1H, 13C NMR spectroscopy and MALDI-TOF mass spectrometry. A quantum-chemical calculation for the 2-CEPP molecule using the ab initio methods in the 6-311G** basis set and the DFT-PBE0/6-311g** method was performed with geometry optimization of all parameters by the standard gradient method. The acid strength of 2-CEPP was theoretically estimated. Using the small-angle X-ray scattering method, it was found that 2-CEPP is an amorphous substance, which, when heated, can transform into a crystalline state. However, when heated at 370 °C, 2-CEPP undergoes decarboxylation and polymerization to form an insoluble heat-resistant product. The occurrence of decarboxylation and polymerization reactions in the formed styrene fragments was confirmed by thermal (differential-scanning calorimetry) and spectral (solid-state 13C NMR spectroscopy) analysis.

Structural Features of Monoethanolamine Aqueous Solutions with Various Compositions: A Combined Experimental and Theoretical Study Using Vibrational Spectroscopy.

In this work, we studied aqueous solutions of monoethanolamine (MEA), which are widely used to remove CO2 from flue and oil gases. This study combined experimental and theoretical methods of vibrational spectroscopy, using high-temperature infrared spectroscopy, quantum-chemical calculations of theoretical vibrational spectra, and structural electronic and energy characteristics of model structures. MEA has a propensity to form associations between various compositions and structures with water molecules, as well as those composed solely of water molecules. The structural and energy characteristics of such associates were analyzed in terms of their ability to interact and retain carbon dioxide. The influence of elevated temperatures and concentration of aqueous MEA solution on change in the structure of associates has also been investigated. An analysis of theoretical and experimental vibrational spectra allowed us to examine the IR spectra of MEA solutions, and identify the bands responsible for the formation of associates that would sorb CO2 well, but would delay its desorption from the solution.

Strain stiffening of Ndc80 complexes attached to microtubule plus ends.

In the mitotic spindle, microtubules attach to chromosomes via kinetochores. The microtubule-binding Ndc80 complex is an integral part of kinetochores, and is essential for kinetochores to attach to microtubules and to transmit forces from dynamic microtubule ends to the chromosomes. The Ndc80 complex has a rod-like appearance with globular domains at its ends that are separated by a long coiled coil. Its mechanical properties are considered important for the dynamic interaction between kinetochores and microtubules. Here, we present a novel method that allows us to time trace the effective stiffness of Ndc80 complexes following shortening microtubule ends against applied force in optical trap experiments. Applying this method to wild-type Ndc80 and three variants (calponin homology (CH) domains mutated or Hec1 tail unphosphorylated, phosphorylated, or truncated), we reveal that each variant exhibits strain stiffening; i.e., the effective stiffness increases under tension that is built up by a depolymerizing microtubule. The strain stiffening relation is roughly linear and independent of the state of the microtubule. We introduce structure-based models that show that the strain stiffening can be traced back to the specific architecture of the Ndc80 complex with a characteristic flexible kink, to thermal fluctuations of the microtubule, and to the bending elasticity of flaring protofilaments, which exert force to move the Ndc80 complexes. Our model accounts for changes in the amount of load-bearing attachments at various force levels and reproduces the roughly linear strain stiffening behavior, highlighting the importance of force-dependent binding affinity.

The depolymerase activity of MCAK shows a graded response to Aurora B kinase phosphorylation through allosteric regulation.

Kinesin-13 motors regulate precise microtubule dynamics and limit microtubule length throughout metazoans by depolymerizing microtubule ends. Recently, the kinesin-13 motor family member MCAK (also known Kif2C) has been proposed to undergo large conformational changes during its catalytic cycle, as it switches from being in solution to being bound to microtubules. Here, we reveal that MCAK has a compact conformation in solution through crosslinking and electron microscopy experiments. When MCAK is bound to the microtubule ends, it adopts an extended conformation with the N-terminus and neck region of MCAK interacting with the microtubule. Interestingly, the region of MCAK that interacts with the microtubule is the region phosphorylated by Aurora B and contains an end binding (EB) protein-binding motif. The level of phosphorylation of the N-terminus results in a graded microtubule depolymerase activity. Here, we show that the N-terminus of MCAK forms a platform to integrate Aurora B kinase downstream signals and in response fine-tunes its depolymerase activity during mitosis. We propose that this allosteric control mechanism allows decoupling of the N-terminus from the motor domain of MCAK to allow MCAK depolymerase activity at kinetochores.

Development of the basics of complex technology for capturing and disposing of heavy metals from surface drains of cities.

For the first time, the basics of waste-free technology for capturing heavy metal ions from urban surface runoff from residential areas of the city with the final utilization of the regenerate were developed. The technology eliminates the subsequent contamination of the lithosphere and atmosphere by regeneration products. The expediency of using fibrous chemosorbents (cationic and polyampholyte) for capturing heavy metal ions from urban surface runoff of residential areas of megalopolises has been justified because of possibility of recycling heavy metal ions and regenerating the sorbent. Model solutions of Fe, Cu, Zn, Pb salts, as well as samples of solutions of real surface effluents were studied. Small experimental samples of filters of various designs were designed and manufactured. The filters were tested at a functioning treatment facility. It was demonstrated that the content of Fe3+, Cu2+, Zn2+, and Pb2+ ions in real surface effluents decreased by 1.4-7 times after passing the effluents even through these small experimental filters. The expediency and possibility of recycling the regenerate as inorganic pigments for the paint industry is shown.

Long tethers provide high-force coupling of the Dam1 ring to shortening microtubules.

Microtubule kinetochore attachments are essential for accurate mitosis, but how these force-generating connections move chromosomes remains poorly understood. Processive motion at shortening microtubule ends can be reconstituted in vitro using microbeads conjugated to the budding yeast kinetochore protein Dam1, which forms microtubule-encircling rings. Here, we report that, when Dam1 is linked to a bead cargo by elongated protein tethers, the maximum force transmitted from a disassembling microtubule increases sixfold compared with a short tether. We interpret this significant improvement with a theory that considers the geometry and mechanics of the microtubule-ring-bead system. Our results show the importance of fibrillar links in tethering microtubule ends to cargo: fibrils enable the cargo to align coaxially with the microtubule, thereby increasing the stability of attachment and the mechanical work that it can do. The force-transducing characteristics of fibril-tethered Dam1 are similar to the analogous properties of purified yeast kinetochores, suggesting that a tethered Dam1 ring comprises the main force-bearing unit of the native attachment.

Phase separation on microtubules: from droplet formation to cellular function?

Microtubules are cytoskeletal polymers that play important roles in numerous cellular processes, ranging from the control of cell shape and polarity to cell division and intracellular transport. Many of these roles rely on proteins that bind to microtubule ends and shafts, carry intrinsically disordered regions, and form complex multivalent interaction networks. A flurry of recent studies demonstrated that these properties allow diverse microtubule-binding proteins to undergo liquid-liquid phase separation (LLPS) in vitro. It is proposed that LLPS could potentially affect multiple microtubule-related processes, such as microtubule nucleation, control of microtubule dynamics and organization, and microtubule-based transport. Here, we discuss the evidence in favor and against the occurrence of LLPS and its functional significance for microtubule-based processes in cells.

Detection and Visualization of Minor Irradiation-Induced Changes in Polytetrafluoroethylene (PTFE) by Raman Spectroscopy.

Exposure of polytetrafluoroethylene (PTFE) to argon plasma results in chemical modification of the polymer near the surface. Interestingly, PTFE modification can be induced by the sub-band gap ultraviolet (UV) irradiation. In the latter case, the changes in the chemical structure are very subtle, and they are practically invisible to conventional experimental techniques. Raman spectra of irradiated and raw samples show practically identical peaks. However, the baseline that is commonly considered as an unwanted spectral component contains an important information that reflects the minor structural changes. With the proper data analysis, this allows us to visualize the effects of the argon plasma and sub-band gap UV irradiation on the polymer.

Dissection of figured wood trait in curly birch (Betula pendula Roth var. carelica (Mercklin) Hämet-Ahti) using high-throughput genotyping.

Curly (Karelian) birch is a special variety of Betula pendula Roth distributed in the northwestern part of Europe. Karelian birch is well-known for its valuable figured curly wood also known as "wooden marble". The genetic basis underlying curly wood formation has been debated since last century, however, there was no data about loci responsible for the curly wood trait. In the present study, we analyzed two full-sibs populations derived from experimental crosses of curly birches and segregating for the trait. RADseq genotyping was applied to reveal how many loci are involved in 'curliness' formation and to search for genetic variants associated with this trait. One single interval on chromosome 10 was detected containing possible candidate genes. InDel marker BpCW1 was suggested for the first time for marker-assisted selection of trees with curly wood at their earliest stages of development.

Changing vulnerability in Asia: contagion and spillovers.

An increasing involvement of the Asian market in the global context plays a fundamental role in spreading shocks across the financial system. This paper examines the extent of vulnerability across Asian equity markets and the United States (US) equity market by distinguishing between spillovers and contagion. Spillovers are detected using a generalised historical decomposition method, while contagion is identified using a portfolio mimicking factor framework using moment conditions. The transmission of spillovers is assessed to capture the direction, strength and signs of the spillovers. The findings show evidence of changing vulnerability in Asia and the US. This is as a result of increased spillovers during crisis events and the presence of contagion. Stronger connections during crisis periods are evident as well as a general deepening of the global network. These connections may result in reduced opportunities for emerging markets. The findings suggest that caution is needed when developing regulations or methods to create a stable financial system.

The Polymers of Diethynylarenes-Is Selective Polymerization at One Acetylene Bond Possible? A Review.

In this review, all available publications on the polymerization of all isomers of bifunctional diethynylarenes due to the opening of C≡C bonds were considered and analyzed. It has been shown that with the use of polymers of diethynylbenzene, heat-resistant and ablative materials, catalysts, sorbents, humidity sensors, and other materials can be obtained. Various catalytic systems and conditions of polymer synthesis are considered. For the convenience of comparison, the publications considered are grouped according to common features, including the types of initiating systems. Critical consideration is given to the features of the intramolecular structure of the synthesized polymers since it determines the entire complex of properties of this material and subsequent materials. Branched and/or insoluble polymers are formed as a result of solid-phase and liquid-phase homopolymerization. It is shown that the synthesis of a completely linear polymer was carried out for the first time by anionic polymerization. The review considers in sufficient detail publications from hard-to-reach sources, as well as publications that required a more thorough critical examination. The review does not consider the polymerization of diethynylarenes with substituted aromatic rings because of their steric restrictions; the diethynylarenes copolymers with complex intramolecular structure; and diethynylarenes polymers obtained by oxidative polycondensation.

Kinetics and Mechanism of Epinephrine Autoxidation in the Presence of Plant Superoxide Inhibitors: A New Look at the Methodology of Using a Model System in Biological and Chemical Research.

Superoxide is the primary active oxygen form produced in living organisms. Because of superoxide anion radical formation during epinephrine oxidation in alkaline medium, this system is offered in some works for antioxidant activity analysis, however, without enough physicochemical justification. Therefore, the task of developing reliable methods for analyzing the superoxide inhibition activity of various objects is very urgent. In this work, a kinetic model of epinephrine autoxidation in an alkaline medium in the presence of antioxidants of plant origin is proposed. The participation of chain reactions with long oxidation chains in this process is revealed. The limiting stage of the process is a one-electron reduction of oxygen by the anionic forms of the phenolic hydroxyls of epinephrine. The appearance of the absorption maximum at a wavelength of 347 nm during epinephrine autoxidation is associated with adrenolutin formation, which is confirmed by HPLC/UV/MS. No adduct formation between phenolic antioxidants and epinephrine oxidation products was found. The complex U-shaped character of epinephrine autoxidation rate dependence on the content of antioxidants in the reaction system was shown. The study of the kinetics of epinephrine autoxidation in the presence of an individual phenolic plant superoxide inhibitor, chlorogenic acid, was carried out for the first time. The inhibitory effect of yarrow, chamomile, and bur beggar-ticks plant extracts in the adrenaline system was examined.

Temperature Dependence of Light Hydrocarbons Sorption and Transport in Dense Membranes Based on Tetradecyl Substituted Silicone Rubber.

Solubility-selective polymer membranes are promising materials for C3+ hydrocarbons removal from methane and other permanent gas streams. To this end, a dense solubility-selective membrane based on crosslinked poly(tetradecyl methyl siloxane) was synthesized. Sorption of methane, ethane, and n-butane in the polymer was measured in the temperature range of 5-35 °C. An abnormal temperature dependence of sorption was detected, contradicting the generally accepted view of sorption as an exothermic process. In particular, methane shows minimal sorption at 5 °C. The abnormal temperature behavior was found to be related to crystallization of the alkyl side chains at temperatures below ~10 °C. Gas permeability determined by sorption and permeation methods are in reasonable agreement with each other and decrease in the order n-C4H10 > C2H6 > CH4. The solubility of these alkanes changes in the same order indicating that poly(tetradecyl methyl siloxane) is indeed the sorption-selective membrane. The diffusivities and permeabilities of studied alkanes declined with decreasing temperature, whereas the n-C4H10/CH4 permselectivity increases with decreasing temperature, reaching a value of 23 at 5 °C.

Two-Dimensional Plasmons in Laterally Confined 2D Electron Systems.

The collective oscillations of charge density (plasmons) in conductive solids are basic excitations that determine the dynamic response of the system. In infinite two-dimensional (2D) electron systems, plasmons have gapless dispersion covering a broad spectral range from subterahertz to infrared, which is promising in light-matter applications. We discuss the state-of-the-art physics of 2D plasmons, especially in confined 2D electron systems in stripe and disk geometry, using the simplest approach for conductivity. When the metal gate is placed in the vicinity of the 2D electron system, an analytical description of the plasmon frequency and damping can be easily obtained. We also analyze gated plasmons in the disk when it was situated at various distances from the gate, and discuss in detail the nontrivial behavior of the damping. We predict that it is not a simple sum of the radiative and collisional dampings, but has a nonmonotonic dependence on the system parameters. For high-mobility 2D systems, this opens the way to achieve the maximal quality factor of plasma resonances. Lastly, we discuss the recently discovered near-gate 2D plasmons propagating along the laterally confined gate, even without applied bias voltage and having gapless dispersion when the gate has the form of a stripe, and discrete spectrum when the gate is in the form of disk. It allows for one to drive the frequency and spatial propagation of such plasmons.