Time-Dependent Model for Fluid Flow in Porous Materials with Multiple Pore Sizes.

An understanding of fluid transport through porous materials is critical for the development of lateral flow assays and analytical devices based on paper microfluidics. Models of fluid transport within porous materials often assume a single capillary pressure and permeability value for the material, implying that the material comprises a single pore size and that the porous material is fully saturated behind the visible wetted front. As a result, current models can lead to inaccuracies when modeling transport over long distances and/or times. A new transport model is presented that incorporates a range of pore sizes to more accurately predict the capillary transport of fluid in porous materials. The model effectively predicts the time-dependent saturation of rectangular strips of Whatman filter no. 1 paper using the manufacturer's data, published pore-size distribution measurements, and the fluid's properties.

Biocompatibility of Tygon® tubing in microfluidic cell culture.

Growth of the MDA-MB-231 breast cancer cell line in microfluidic channels was inhibited when culture media was delivered to the channels via microbore Tygon® tubing. Culture media incubated within this tubing also inhibited growth of these cells in conventional 96-well plates. These detrimental effects were not due to depletion of critical nutrients due to adsorption of media components onto the tubing surface. A pH change was also ruled out as a cause. Nuclear magnetic resonance spectroscopy of the cell growth media before and after incubation in the tubing confirmed no detectable loss of media components but did detect the presence of additional unidentified signals in the aliphatic region of the spectrum. These results indicate leaching of a chemical species from microbore Tygon® tubing that can affect cell growth in microfluidic devices.

A temperature microsensor for measuring laser-induced heating in gold nanorods.

Measuring temperature is an extensively explored field of analysis, but measuring a temperature change in a nanoparticle is a new challenge. Here, a microsensor is configured to measure temperature changes in gold nanorods in solution upon laser irradiation. The device consists of a silicon wafer coated with silicon nitride in which a microfabricated resistance temperature detector was embedded and attached to a digital multimeter. A polydimethylsiloxane mold served as a microcontainer for the sample attached on top of the silicon membrane. This enables laser irradiation of the gold nanorods and subsequent measurement of temperature changes. The results showed a temperature increase of 8 to 10 °C and good correlation with theoretical calculations and bulk sample direct temperature measurements. These results demonstrate the suitability of this simple temperature microsensor for determining laser-induced heating profiles of metallic nanomaterials; such measurements will be essential for optimizing therapeutic and catalytic applications.

Current and future directions of drug delivery for the treatment of mental illnesses.

Mental illnesses including anxiety disorders, autism spectrum disorder, post-traumatic stress disorder, schizophrenia, depression, and others exact an immense toll on the healthcare system and society at large. Depression alone impacts 21 million adults and costs over $200 billion annually in the United States. However, pharmaceutical strategies to treat mental illnesses are lagging behind drug development in many other disease areas. Because many of the shortcomings of therapeutics for mental illness relate to delivery problems, drug delivery technologies have the potential to radically improve the effectiveness of therapeutics for these diseases. This review describes the current pharmacotherapeutic approaches to treating mental illnesses as well as drug delivery approaches that have improved existing therapies. Approaches to improve drug bioavailability, provide controlled release of therapeutics, and enable drug targeting to the central nervous system (CNS) will be highlighted. Moreover, next-generation delivery approaches such as environmentally-controlled release and interval/sequential drug release will be addressed. Based on the evolving landscape of the treatment of mental illnesses, the nascent field of drug delivery in mental health has tremendous potential for growth in terms of both economic and patient impact.

Interval delivery of 5HT2A agonists using multilayered polymer films.

There is an urgent unmet medical need to develop therapeutic options for the ~50% of depression patients suffering from treatment-resistant depression, which is difficult to treat with existing psycho- and pharmaco-therapeutic options. Classical psychedelics, such as the 5HT2A agonists, have re-emerged as a treatment paradigm for depression. Recent clinical trials highlight the potential effectiveness of 5HT2A agonists to improve mood and psychotherapeutic growth in treatment-resistant depression patients, even in those who have failed a median of four previous medications in their lifetime. Moreover, microdosing could be a promising way to achieve long-term alleviation of depression symptoms without a hallucinogenic experience. However, there are a gamut of practical barriers that stymie further investigation of microdosing 5HT2A agonists, including: low compliance with the complicated dosing regimen, high risk of diversion of controlled substances, and difficulty and cost administering the long-term treatment regimens in controlled settings. Here, we developed a drug delivery system composed of multilayered cellulose acetate phthalate (CAP)/Pluronic F-127 (P) films for the encapsulation and interval delivery of 5HT2A agonists from a fully biodegradable and biocompatible implant. CAPP film composition, thickness, and layering strategies were optimized, and we demonstrated three distinct pulses from the multilayered CAPP films in vitro. Additionally, the pharmacokinetics and biodistribution of the 5HT2A agonist 2,5-Dimethoxy-4-iodoamphetamine (DOI) were quantified following the subcutaneous implantation of DOI-loaded single and multilayered CAPP films. Our results demonstrate, for the first time, the interval delivery of psychedelics from an implantable drug delivery system and open the door to future studies into the therapeutic potential of psychedelic delivery.

Microfluidic cytometer for the characterization of cell lysis.

Blood cytometry and intercellular analysis typically requires lysis as a preparatory step, which can alter the results of downstream analyses. We fabricated a microfluidic cytometer to characterize erythrocyte lysis kinetics. Forward light scatter from erythrocytes was used for enumeration at specific locations on a microfluidic chip. Diffusive transport coupled with laminar flow was used to control the concentration and exposure time of the lysis reagent Zap-OGLOBIN II to erythrocytes. Standard clinical practice is to expose erythrocytes to lysis reagent for 10 min. Under optimum conditions, we achieved complete erythrocyte lysis of a blood sample in 0.7 s. A maximum lysis reaction rate of 1.55 s(-1) was extrapolated from the data. Lysis began after 0.2 s and could be initiated with a lysis reagent concentration of 1.0% (68.5 mM). An equation that related lysis reagent concentration, [A], to erythrocyte lysis, [B], was determined to be [B] = -0.77[A](0.29)t.

Under-Oil Autonomously Regulated Oxygen Microenvironments: A Goldilocks Principle-Based Approach for Microscale Cell Culture.

Oxygen levels in vivo are autonomously regulated by a supply-demand balance, which can be altered in disease states. However, the oxygen levels of in vitro cell culture systems, particularly microscale cell culture, are typically dominated by either supply or demand. Further, the oxygen microenvironment in these systems is rarely monitored or reported. Here, a method to establish and dynamically monitor autonomously regulated oxygen microenvironments (AROM) using an oil overlay in an open microscale cell culture system is presented. Using this method, the oxygen microenvironment is dynamically regulated via the supply-demand balance of the system. Numerical simulation and experimental validation of oxygen transport within multi-liquid-phase, microscale culture systems involving a variety of cell types, including mammalian, fungal, and bacterial cells are presented. Finally, AROM is applied to establish a coculture between cells with disparate oxygen demands-primary intestinal epithelial cells (oxygen consuming) and Bacteroides uniformis (an anaerobic species prevalent in the human gut).

Microfabricated curtains for controlled cell seeding in high throughput microfluidic systems.

A microfabricated cell curtain is presented that facilitates cellular assays. The cell curtain is defined as a poly(dimethylsiloxane) (PDMS) wall that extends from the ceiling of a cell culture microchamber to within microns of the chamber floor. Curtain use is demonstrated by observing monolayer human epidermal keratinocyte (HEK) colonies for 48 h longer than possible with non-curtained microfluidic chambers. The curtains were further characterized by integrating them into a 96 chamber high throughput microfluidic cell culture device. As proof of concept, this device was used to assay a range of ethanol dilutions spanning 0-22% in cell culture medium. Cells exposed to 12% ethanol or less for 30 min would recover to 85% viability at 24 h, while cells exposed to higher concentrations had viabilities below 10%. The data also showed that cells exposed to 6% ethanol or less grew in population size, 8% ethanol exposure stunted growth, and higher concentrations led to population loss. Curtain use permitted high initial cell seeding densities and increased the amount of time cells can be cultured compared to multi-well plates.

Microfluidic aqueous two phase system for leukocyte concentration from whole blood.

Leukocytes from a whole blood sample were concentrated using a microfluidic aqueous two phase system (microATPS). Whole blood was simultaneously exposed to polyethylene glycol (PEG) and dextran (Dex) phase streams and cells were partitioned based on their differential affinity for the streams. The laminar flow characteristic of microfluidic devices was used to create zero, one, and two stable interfaces between the polymer streams. Three different patterns of three polymer streams each were evaluated for their effectiveness in concentrating leukocytes: immiscible PEG-PEG-Dex, immiscible Dex-PEG-Dex, and miscible PEG-PBS-Dex. The most effective configuration was the Dex-PEG-Dex stream pattern which on average increased the ratio of leukocytes to erythrocytes by a factor of 9.13 over unconcentrated blood.

Paper-based passive pumps to generate controllable whole blood flow through microfluidic devices.

Fluid manipulation in microfluidic systems is often controlled by active pumps that are relatively large in size and require external power sources which limit their portability and use in limited-resource settings. In this work, portable, detachable, low-cost, and power-free paper pumps with engineered capillary tubes (referred to as "grooves") that can passively drive viscous fluids based on capillary action are presented. The proposed grooved paper pumps are capable of generating a controllable flow of complex biofluids within microfluidic devices with minimal user intervention and no external power sources. The pumping performance of grooved paper pumps in this study is tested with undiluted, unseparated whole blood samples - demonstrating successful transport of approximately 150 µL of blood within an average time of 5 minutes to 50 minutes, depending on their design parameters. Results for the flow rate of grooved paper pumps indicate that the number of grooves created within the porous paper determines the profile of the generated flow rate. The experimental data also show that as the number of grooves in the pumps is increased, the flow rate approaches a constant value for the entire duration of pumping before the pump becomes saturated. The promising performance of grooved paper pumps with whole blood offers potential applications of these small, disposable pumps in point-of-care diagnostics in which time is crucial and access to external power is limited.

A linear dilution microfluidic device for cytotoxicity assays.

A two-layer polymer microfluidic device is presented which creates nine linear dilutions from two input fluid streams mixed in varying volumetric proportions. The linearity of the nine dilutions is conserved when the flow rate is held constant at 1.0 microl min(-1) (R(2) = 0.9995) and when it is varied from 0.5-16 microl min(-1) (R(2) = 0.9998). An analytical expression is presented for designing microfluidic devices with arbitrary numbers of linear dilutions. To demonstrate the efficacy of this device, primary human epidermal keratinocytes (HEK) were stained with nine dilutions of calcein, resulting in a linear spread of fluorescent intensities (R(2) = 0.94). The operating principles of the device can be scaled up to incorporate any number of linear dilutions. This scalability, coupled with an intrinsic ability to create linear dilutions under a variety of operating conditions, makes the device applicable to high throughput screening applications such as combinatorial chemistry or cytotoxicity assays.

Point-of-care diagnostics for niche applications.

Point-of-care or point-of-use diagnostics are analytical devices that provide clinically relevant information without the need for a core clinical laboratory. In this review we define point-of-care diagnostics as portable versions of assays performed in a traditional clinical chemistry laboratory. This review discusses five areas relevant to human and animal health where increased attention could produce significant impact: veterinary medicine, space travel, sports medicine, emergency medicine, and operating room efficiency. For each of these areas, clinical need, available commercial products, and ongoing research into new devices are highlighted.

Drug Delivery: Microneedles Integrated with Pancreatic Cells and Synthetic Glucose-Signal Amplifiers for Smart Insulin Delivery (Adv. Mater. 16/2016).

A bio-responsive microneedle-based patch, integrated with a rhodamine-stained glucose-signal amplifier and calcein-AM-stained pancreatic ß-cell capsules, is developed by Z. Gu and co-workers. This "smart cell patch", described on page 3115, effectively regulates the blood glucose level of type-1 diabetic mice, achieving a reduction for over 10 h. Image credit: Yanqi Ye.

Microneedles Integrated with Pancreatic Cells and Synthetic Glucose-Signal Amplifiers for Smart Insulin Delivery.

An innovative microneedle (MN)-based cell therapy is developed for glucose-responsive regulation of the insulin secretion from exogenous pancreatic ß-cells without implantation. One MN patch can quickly reduce the blood-sugar levels (BGLs) of chemically induced type-1 diabetic mice and stabilize BGLs at a reduced level for over 10 h.

Effects of flow and diffusion on chemotaxis studies in a microfabricated gradient generator.

An understanding of chemotaxis at the level of cell-molecule interactions is important because of its relevance in cancer, immunology, and microbiology, just to name a few. This study quantifies the effects of flow on cell migration during chemotaxis in a microfluidic device. The chemotaxis gradient within the device was modeled and compared to experimental results. Chemotaxis experiments were performed using the chemokine CXCL8 under different flow rates with human HL60 promyelocytic leukemia cells expressing a transfected CXCR2 chemokine receptor. Cell trajectories were separated into x and y axis components. When the microchannel flow rates were increased, cell trajectories along the x axis were found to be significantly affected (p < 0.05). Total migration distances were not affected. These results should be considered when using similar microfluidic devices for chemotaxis studies so that flow bias can be minimized. It may be possible to use this effect to estimate the total tractile force exerted by a cell during chemotaxis, which would be particularly valuable for cells whose tractile forces are below the level of detection with standard techniques of traction-force microscopy.

A passive pumping method for microfluidic devices.

The surface energy present in a small drop of liquid is used to pump the liquid through a microchannel. The flow rate is determined by the volume of the drop present on the pumping port of the microchannel. A flow rate of 1.25 microL s(-1) is demonstrated using 0.5 microL drops of water. Two other fluid manipulations are demonstrated using the passive pumping method: pumping liquid to a higher gravitational potential energy and creating a plug within a microchannel.

An evaporation-based microfluidic sample concentration method.

We present a method for sample concentration within microfluidic devices using evaporation-induced flow. Evaporation-induced flow is easy to incorporate into microfluidic designs and can be used to concentrate a wide variety of molecules. The practicality of this method was demonstrated with 0.2 microm fluorescent spheres and FITC-labeled BSA. Thirty two percent of the 0.6 microL fluorescent sphere suspension was concentrated into a well within a microfluidic device. In the same amount of time, 93% of the 0.6 microL FITC-labeled BSA solution was concentrated.

Microenvironment design considerations for cellular scale studies.

In vivo cellular microenvironments are not well-mimicked in present in vitro cell culture systems. Microtechnology, and microfluidics in particular, provides the tools to create in vivo-like cellular microenvironments in vitro. Features of in vitro cellular microenvironments are discussed and compared to macroscale cell culture environments; the concept of an effective culture volume (ECV) is introduced to facilitate the comparison. Current research using microtechnology to investigate in vitro cellular microenvironments is presented and areas where more research is needed in characterizing the in vitro microenvironment are outlined.

A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia.

Metastatic cancer cells must traverse a microenvironment ranging from extremely hypoxic, within the tumor, to highly oxygenated, within the host's vasculature. Tumor hypoxia can be further characterized by regions of both chronic and intermittent hypoxia. We present the design and characterization of a microfluidic device that can simultaneously mimic the oxygenation conditions observed within the tumor and model the cell migration and intravasation processes. This device can generate spatial oxygen gradients of chronic hypoxia and produce dynamically changing hypoxic microenvironments in long-term culture of cancer cells.

A Microfluidic Passive Pumping Coulter Counter.

A microfluidic device using on-chip passive pumping was characterized for use as a particle counter. Flow occurred due to a Young-Laplace pressure gradient between two 1.2 mm diameter inlets and a 4 mm diameter reservoir when 0.5µ L fluid droplets were applied to the inlets using a micropipette. Polystyrene particles (10µm diameter) were enumerated using the resistive pulse technique. Particle counts using passive pumping were within 13% of counts from a device using syringe pumping. All pumping methods produced particle counts that were within 16% of those obtained with a hemocytometer. The effect of intermediate wash steps on particle counts within the passive pumping device was determined. Zero, one, or two wash droplets were loaded after the first of two sample droplets. No statistical difference was detected in the mean particle counts among the loading patterns (p > 0.05). Hydrodynamic focusing using passive pumping was also demonstrated.