RESUMO
Constructing dual-site catalysts consisting of atomically dispersed metal single atoms and metal atomic clusters (MACs) is a promising approach to further boost the catalytic activity for oxygen reduction reaction (ORR). Herein, a porous CoSA-AC@SNC featuring the coexistence of Co single-atom sites (CoN4) and S-coordinated Co atomic clusters (SCo6) in S, N co-doped carbon substrate is successfully synthesized by using porphyrinic metal-organic framework (Co-TPyP MOF) as the precursor. The introduction of the sulfur source creates abundant microstructural defects to anchor Co metal clusters, thus modulating the electronic structure of its surrounding carbon substrate. The synergistic effect between the two types of active sites and structural advantages, in turn, results in high ORR performance of CoSA-AC@SNC with half-wave potential (E1/2) of 0.86 V and Tafel slope of 50.17 mV dec-1. Density functional theory (DFT) calculations also support the synergistic effect between CoN4 and SCo6 by detailing the catalytic mechanism for the improved ORR performance. The as-fabricated Zn-air battery (ZAB) using CoSA-AC@SNC demonstrates impressive peak power density of 174.1 mW cm-2 and charge/discharge durability for 148 h. This work provides a facile synthesis route for dual-site catalysts and can be extended to the development of other efficient atomically dispersed metal-based electrocatalysts.
RESUMO
Metal-organic frameworks (MOFs) have garnered attention across various fields due to their noteworthy features like high specific surface area, substantial porosity, and adjustable performance. In the realm of water treatment, MOFs exhibit great potential for eliminating pollutants such as organics, heavy metals, and oils. Nonetheless, the inherent powder characteristics of MOFs pose challenges in terms of recycling, pipeline blockage, and even secondary pollution in practical applications. Addressing these issues, the incorporation of MOFs into sponges proves to be an effective solution. Strategies like one-pot synthesis, in situ growth, and impregnation are commonly employed for loading MOFs onto sponges. This review comprehensively explores the synthesis strategies of MOFs and sponges, along with their applications in water treatment, aiming to contribute to the ongoing advancement of MOF materials.
RESUMO
Metal-organic framework-derived carbon materials have shown extensive application in the sensitive extraction of polycyclic aromatic hydrocarbons (PAHs), but more active sites for its adsorption were still a tireless pursuit. In this study, ZIF-nanoleaf-derived carbon (NLCs) was synthesized and developed as a solid-phase microextraction (SPME) fiber (NLCs-F). The extraction performance was compared with ZIF-dodecahedron-derived carbon (DHCs) coated fiber (DHCs-F), which was prepared by only changing the ratio of the reactants. The unique morphology of NLCs provided abundant adsorption active sites for the selected PAHs, while the large average aperture facilitated selective extraction of high molecular weight analytes. Additionally, the high carbon content enhanced the strong enrichment capability for hydrophobic PAHs. Hence, the prepared NLCs-F coupled with GC-MS showed a good correlation coefficient (0.9975) in a wide linear range, low limits of detection (0.3-1.8 ng L-1), satisfactory repeatability, and reproducibility, which made it apply in the enrichment of PAHs in actual tea and coffee samples.
RESUMO
BACKGROUND: The new coronavirus Omicron variant strain spread rapidly worldwide and is currently the primary mutant strain prevalent in the world. OBJECTIVE: To explore the clinical features of severe central nervous system lesions in children infected with novel coronavirus Omicron mutant strain, so as to provide a reference for clinical diagnosis and treatment. MATERIALS AND METHODS: The clinical data of 13 children diagnosed with novel coronavirus Omicron variant strain complicated with severe central nervous system infection from December 13, 2022, to January 31, 2023, in the Children's Intensive Care Medicine Department of Shanxi Children's Hospital were retrospectively analyzed. RESULTS: Among the 13 children, there were 9 males (69%) and 4 females (31%); the ages ranged from 1-year-old 16 days to 13 years old, with a median age of 9 years old, and most of them were school-age children (84.6%). The 13 children were usually healthy, but this time they were all positive for the new coronavirus nucleic acid test. The 13 children had obvious signs of the abnormal nervous system when they were admitted to the hospital, among which 12 cases (92.3%) showed convulsions, 11 children had obvious disturbance of consciousness (84.6%) when they were admitted to the hospital, and 5 children had circulatory disorders (38.4%). Among the 13 children, 2 were cured (15.3%), 5 children had serious sequelae (38.4%) when they were discharged from the hospital, and 6 children died of severe illness (46.3%). CONCLUSION: This study illuminates the clinical characteristics of severe central nervous system complications in children with coronavirus variant infection, highlighting rapid onset, swift progression, relatively poor prognosis, and notable symptoms such as high fever, convulsions, altered consciousness, elevated interleukin-6 levels, increased cerebrospinal fluid lactate levels, and early imaging changes.
Assuntos
Sistema Nervoso Central , SARS-CoV-2 , Criança , Masculino , Feminino , Humanos , Recém-Nascido , Estudos Retrospectivos , Convulsões , HospitaisRESUMO
Metal-organic frameworks (MOFs) have potential applications in removing pollutants such as heavy metals, oils, and toxins from water. However, due to the intrinsic fragility of MOFs and their fine powder form, there are still technical barriers to their practical application such as blockage of pipes, difficulty in recovery, and potential environmental toxicity. Therefore, attention has focused on approaches to convert nanocrystalline MOFs into macroscopic materials to overcome these limitations. Recently, strategies for shaping MOFs into beads (0D), nanofibers (1D), membranes (2D), and gels/sponges (3D) with macrostructures are developed including direct mixing, in situ growth, or deposition of MOFs with polymers, cotton, foams or other porous substrates. In this review, successful strategies for the fabrication of macroscopic materials from MOFs and their applications in removing pollutants from water including adsorption, separation, and advanced oxidation processes, are discussed. The relationship between the macroscopic performance and the microstructure of materials, and how the range of 0D to 3D macroscopic materials can be used for water treatment are also outlined.
Assuntos
Poluentes Ambientais , Estruturas Metalorgânicas , Metais Pesados , Purificação da Água , Adsorção , Estruturas Metalorgânicas/química , Metais Pesados/químicaRESUMO
Single oxygen-based advanced oxidation processes (1O2-AOPs) exhibit great prospects in selective degradation of organic pollutants. However, efficient production of 1O2 via tailored design of catalysts to achieve selective oxidation of contaminants remains challenging. Herein, we develop a simple strategy to regulate the components and coordination of Co-N-C catalysts at the atomic level by adjusting the Zn/Co ratio of bimetallic zeolitic imidazolate frameworks (ZnxCo1-ZIFs). Zn4Co1-C demonstrates 98% selective removal of phenol in the mixed phenol/benzoic acid (phenol/BA) solutions. Density functional theory calculations and experiments reveal that more active CoN4 sites are generated in Zn4Co1-C, which are beneficial to peroxymonosulfate activation to generate 1O2. Furthermore, the correlation between the origin of selectivity and well-defined catalysts is systematically investigated by the electron paramagnetic resonance test and quenching experiments. This work may provide novel insights into selective removal of target pollutants in a complicated water matrix.
Assuntos
Poluentes Ambientais , Catálise , Oxigênio , Peróxidos , Fenóis , ÁguaRESUMO
Development of efficient catalysts for peroxymonosulfate (PMS) activation and further understanding its mechanism on organic pollutants degradation is of significant importance for advanced oxidation processes (AOPs). Herein, hollow (Co, Mn)3O4 catalysts were synthesized by calcination of Co, Mn containing metal-organic frameworks (MOFs) and further used to evaluate the effectiveness of organic pollutants (Bisphenol A (BPA), atrazine (ATZ), and diethyl phthalate (DEP)) degradation by PMS activation. The PMS utilization efficiency in (Co, Mn)3O4/PMS system (36.4%) was estimated to be 28.0% and 43.8% higher than that of Co3O4/PMS and Mn5O8/PMS system, respectively. Notably, the metal leaching in (Co, Mn)3O4/PMS system was significantly suppressed. The utilization efficiency also reveals an inverse proportionality relationship with BPA mineralization but decreases with increasing initial pH value. A synergy between oxides of Co and Mn was perceived to enhance PMS utilization efficiency and BPA degradation. The results indicate enhanced catalytic performance with (Co, Mn)3O4 compared to Co3O4 derived from Co-MOF and other reported catalysts, with 99% of BPA degradation within 4 min. The oxidation mechanism was then proposed based on the electron paramagnetic resonance (EPR) and XPS results. Our findings might have contributed to designing heterogeneous catalysts for efficient PMS utilization in AOPs.
Assuntos
Poluentes Ambientais , Cobalto , Nanotecnologia , Óxidos , PeróxidosRESUMO
Clean water production calls for highly efficient and less energy-intensive technologies. Herein, a novel concept of a sequential ultrafiltration-catalysis membrane is developed by loading Co3O4/C@SiO2 yolk-shell nanoreactors into the fingerlike channels of a polymeric ultrafiltration membrane. Such a sequenced structure design successfully integrates selective separation with peroxymonosulfate-based catalysis to prepare a functionalized molecular sieve membrane, which exhibits excellent decontamination performance toward multipollutants by filtering the water matrices containing humic acid (HA) and bisphenol A (BPA). In this study, 100% rejection of HA and 95% catalytic degradation of BPA were achieved under a low pressure of 0.14 MPa and an ultrahigh flux of 229 L m-2 h-1, corresponding to a retention time of 3.1 s. Notably, the removal performance of multiple pollutants essentially depends on the ordered arrangement of ultrafiltration and catalysis. Moreover, the flow-through process demonstrated significant enhancement of BPA degradation kinetics, which is 21.9 times higher than that of a conventional batch reactor. This study provides a novel strategy for excellent removal of multiple pollutants in water.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Purificação da Água , Catálise , Dióxido de Silício , Ultrafiltração , Água , Poluentes Químicos da Água/análiseRESUMO
As an important advanced oxidation technology for environmental purification, photocatalytic degradation has received extensive attention. Designing and synthesizing a catalyst with high-intensity photocatalytic performance is a very challenging subject. Herein, one polydentate cation was synthesized by 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1, 4-bis (bromomethyl) benzene. Inorganic-organic hybrid compounds 1, 2 were synthesized by hydrothermal and room temperature volatilization with inorganic metal salts, namely, {[L1]0.5·[Cu2Br4]0.5}n (1), {[L1]·[Cu2I4]·CH3CN}n (2). Under visible light, compounds 1 and 2 were investigated for their degradation effects on tetracycline (TC) in water. The experimental results showed that compounds 1 and 2 with appropriate concentration of H2O2 had obvious photocatalytic degradation effect on TC. In addition, the influencing factors of photocatalysis such as the amount of adsorbent, the initial concentration of TC and the different pH value were investigated. The photocatalyst exhibits good stability and cyclability.
Assuntos
Peróxido de Hidrogênio , Tetraciclina , Catálise , Luz , PiperazinasRESUMO
Over the past decades, the development of porous materials has directly or indirectly affected industrial production methods. Metal-organic frameworks (MOFs) as an emerging class of porous materials exhibit some unique advantages, including controllable composition, a large surface area, high porosity, and so on. These attractive characteristics of MOFs have led to their potential applications in energy storage and conversion devices, drug delivery, adsorption and storage, sensors, and other areas. However, powdered MOFs have limited practical applications owing to poor processability, safety hazards from dust formation, and poor recyclability. In addition, the inherent micro/mesoporosities of MOFs also reduce the accessibility and diffusion kinetics for large molecules. To improve their processability for practical applications, MOFs are often deposited as MOF layers or films (i.e., MOF-coated composites) on supporting materials or are formed into 3D structured composites, such as aerogels and hydrogels. In this article, we review recent researches on these MOF composites, including their synthetic methods and potential applications in energy storage devices, heavy metal ion adsorption, and water purification. Finally, the future outlook and challenges associated with the large-scale fabrication of MOF-based composites for practical applications are discussed.
RESUMO
Selective removal of organic pollutants from surface water with high efficiency is crucial in water purification. Here, yolk-shell Co/C nanoreactors (YSCCNs) are facilely synthesized via pyrolysis of controllably etched ZIF-67 by tannic acid, and their degradation performance on multiple pollutants is demonstrated. To present the structure-performance relationship between the designed nanocatalyst and the selective removal of organic pollutants, bisphenol A (BPA) was selected as the targeted pollutant with coexistence of humus acid (HA). For comparison, solid and hollow ZIF-67 derived Co/C nanoparticles denoted as SCCNs and HCCNs, were also tested. The results show that YSCCNs exhibit enhanced BPA degradation rate of 0.32 min-1, which is 23.1% and 45.4% higher than that of HCCNs and SCCNs in HA (10 ppm) system. The essential improvement can be ascribed to the synergetic effects from shell layer (size-exclusion) and core/shell (confinement effect). The degradation mechanism and pathway are further confirmed by radical quenching experiments and liquid chromatography-mass spectrograph (LC-MS), respectively. In addition, some influential factors, including reaction temperature, pH value, and peroxymonosulfate (PMS) dosage are investigated in detail. This work provides a possible way to selectively remove target contaminant from multiple pollutants in complex water system.
Assuntos
Poluentes Ambientais , Estruturas Metalorgânicas , Purificação da ÁguaRESUMO
Nanofiltration (NF) is an advanced environmental technology in water treatment. To thin film nanocomposite (TFN) membrane, good compatibility between nanofillers and polyamide (PA) layer is the guarantee of remarkable performance. Herein, tannic acid (TA) was employed as modifier of UIO-66-NH2 prior to the interfacial polymerization (IP). With TA modification, more interaction can be formed so that the compatibility between nanofillers and PA layer can be promoted at the molecular level. Characterizations demonstrated the coating of TA on UIO-66-NH2, together with successful introducing of nanofillers in TFN membranes. Compared to pristine thin film composite (TFC) membrane, both UIO-incorporated TFN (TFN-U) and TA modified UIO-incorporated TFN (TFN-TU) membranes showed higher permeance (111.2% and 93% enhancement, respectively). However, under the same nanofillers dose, TFN-TU exhibited slightly lower permeance and higher rejection than TFN-U since the bridging effect of TA healed non-selective voids in skin layer. With the increasing of nanofiller dose in IP, TFN-TU remained reasonable selectivity while TFN-U failed to. Moreover, TFN-TU showed better anti-fouling property due to TA modification. Introducing TA modified MOFs into IP can serve as an ingenious strategy for TFN membrane to achieve high-quality environmental applications.
Assuntos
Estruturas Metalorgânicas , Nanocompostos , Purificação da Água , Nylons , TaninosRESUMO
Carbon aerogels (CAs) with 3D interconnected networks hold promise for application in areas such as pollutant treatment, energy storage, and electrocatalysis. In spite of this, it remains challenging to synthesize high-performance CAs on a large scale in a simple and sustainable manner. We report an eco-friendly method for the scalable synthesis of ultralight and superporous CAs by using cheap and widely available agarose (AG) biomass as the carbon precursor. Zeolitic imidazolate framework-8 (ZIF-8) with high porosity is introduced into the AG aerogels to increase the specific surface area and enable heteroatom doping. After pyrolysis under inert atmosphere, the ZIF-8/AG-derived nitrogen-doped CAs show a highly interconnected porous mazelike structure with a low density of 24â mg cm-3 , a high specific surface area of 516â m2 g-1 , and a large pore volume of 0.58â cm-3 g-1 . The resulting CAs exhibit significant potential for application in the adsorption of organic pollutants.
RESUMO
With the ever-growing environmental issues, sulfate radical (SO4â¢- )-based advanced oxidation processes (SR-AOPs) have been attracting widespread attention due to their high selectivity and oxidative potential in water purification. Among various methods generating SO4â¢- , employing heterogeneous catalysts for activation of peroxymonosulfate or persulfate has been demonstrated as an effective strategy. Therefore, the future advances of SR-AOPs depend on the development of adequate catalysts with high activity and stability. Metal-organic frameworks (MOFs) with large surface area, ultrahigh porosity, and diversity of material design have been extensively used in heterogeneous catalysts, and more recently, enormous effort has been made to utilize MOFs-based materials for SR-AOPs applications. In this work, the state-of-the-art research on pristine MOFs, MOFs composites, and their derivatives, such as oxides, metal/carbon hybrids, and carbon materials for SR-AOPs, is summarized. The mechanisms, including radical and nonradical pathways, are also detailed in the discussion. This work will hopefully promote the future development of MOFs-based materials toward SR-AOPs applications.
RESUMO
Background: Viral encephalitis (VE) is one of the common diseases of children with intracranial infection, it has come on urgent, progress is fast, and the clinical features of severe cases may even lead to disability, death, and other serious adverse prognostic outcomes, so seek in early diagnosis and prognosis of efficiency of the relevant indicators to stop in time and take effective means to prevent the further development is of great significance. Neopterin (NPT), as a factor that plays an important role in the process of validation development, has been relatively rarely studied in children with VE. Methods: In this study, 127 cases of children with VE were retrieved from the TCGA database by bioinformatics, and their amplitude integrated electroencephalogram (AEEG) related information was collected at the same time. The neurodevelopmental status of VE children was evaluated according to the Gesell scale and divided into the good group (n=88) and the poor group (n=39). The differences in NPT expression and AEEG score between them were observed. In addition, the clinical data of 100 children without VE were screened from the database, and the differences in NPT expression and AEEG score between VE children and non-VE children were compared. The ROC curve was used to evaluate the clinical efficacy of NPT combined with AEEG in diagnosis and prognosis prediction. Kaplan-Meier was used to observe the effect of NPT high expression and low expression on poor prognosis of VE children.
RESUMO
Global warming is a crisis that humanity must face together. With greenhouse gases (GHGs) as the main factor causing global warming, the adoption of relevant processes to eliminate them is essential. With the advantages of high specific surface area, large pore volume, and tunable synthesis, metal-organic frameworks (MOFs) have attracted much attention in GHG storage, adsorption, separation, and catalysis. However, as the pool of MOFs expands rapidly with new syntheses and discoveries, finding a suitable MOF for a particular application is highly challenging. In this regard, high-throughput computational screening is considered the most effective research method for screening a large number of materials to discover high-performance target MOFs. Typically, high-throughput computational screening generates voluminous and multidimensional data, which is well suited for machine learning (ML) training to improve the screening efficiency and explore the relationships between the multidimensional data in depth. This Review summarizes the general process and common methods for using ML to screen MOFs in the field of GHG removal. It also addresses the challenges faced by ML in exploring the MOF space and potential directions for the future development of ML for MOF screening. This aims to enhance the understanding of the integration of ML and MOFs in various fields and broaden the application and development ideas of MOFs.
RESUMO
Highly efficient single atom catalysts are critical to substantially promote for peroxymonosulfate (PMS) activation to organic pollutant degradation, but it remains a challenge at present. Herein, single atom Mn anchored on N-doped porous carbon (SA-Mn-NSC) was synthesized by ball milling of Mn-doped carbon nitride and spirulina biochar to dominantly activate PMS. The precursor of carbon nitride and spirulina possessed a strong coordinating capability for Mn(II), facilitating the formation of highly dispersed nitrogen-coordinated Mn sites (Mn-N4). The SA-Mn-NSC catalyst exhibited high activity and stability in the heterogeneous activation of PMS to degrade a wide range of pollutants within 10 min, showing an outstanding degradation rate constant of 0.31 min-1 in enrofloxacin (ENR) degradation. The high surface density of Mn-N4 sites and abundant interconnected meso-macro pores were highly favorable for activating PMS to produce 1O2 and high-valent manganese (Mn(IV)) for pollutant degradation. This work offers a new pathway of using a low-cost and easily accessible single-atom catalysts (SACs) and could inspire more catalytic oxidation strategies.
Assuntos
Poluentes Ambientais , Spirulina , Carbono , Catálise , Enrofloxacina , Manganês , Nitrilas , Nitrogênio , Peróxidos , PorosidadeRESUMO
Fluoride in the hydrosphere exceeds the standard, which could be critically hazardous to human health and the natural environment. The adsorption method is a mature and effective way to remove pollutants in water, including fluoride. In this study, we synthesized three kinds of cerium-based metal-organic frameworks (Ce-MOFs) with different structures and properties by modulating the organic ligands (i.e., trimesic acid (BTC), 1,2,4,5-benzenetetracarboxylic acid (PMA), and terephthalic acid (BDC)) via the solvothermal method. The adsorption kinetics of Ce-MOFs on fluoride well fit the pseudo second order model, and their adsorption isotherms also conform to Langmuir isothermal model. The thermodynamic study reveals that the adsorption process is a spontaneous endothermic reaction. The maximum saturated adsorption capacities of Ce-BTC, Ce-PMA, and Ce-BDC are 70.7, 159.6, and 139.5 mg g-1, respectively. Ce-MOFs have stable and excellent adsorption capacity at pH = 3-9. Coexisting anions (Cl-, SO42-, and NO3-) do not affect the performance of Ce-MOFs for fluoride removal. Moreover, Ce-MOFs also show their broad prospect as superior fluoride adsorbents because of their excellent performance and reusability in real water samples. Organic ligands have a remarkable influence on the defluoridation performance of Ce-MOFs. This work will provide a feasible idea for designing MOFs as superiors adsorbents for defluoridation.
Assuntos
Cério , Estruturas Metalorgânicas , Poluentes Químicos da Água , Purificação da Água , Humanos , Fluoretos/química , Estruturas Metalorgânicas/química , Cério/química , Água , Poluentes Químicos da Água/química , Purificação da Água/métodos , Adsorção , CinéticaRESUMO
Developing S-scheme systems with impressive photocatalytic performance is of huge meaning in realizing the long-term conversion of solar energy into hydrogen. Herein, ZnIn2S4 nanoribbons were integrated with hierarchical CeO2 hollow spheres to construct heterostructure using an oil bath approach under mild conditions. The optimized CeO2/ZnIn2S4 presented a superior photocatalytic hydrogen production rate of 69 µmol/h, which is about 4.9 and 11.5 times greater than pristine ZnIn2S4 and CeO2, respectively. In addition, its apparent quantum yield achieved 7.6% at 420 nm. The improved photoactivity of the CeO2/ZnIn2S4 heterojunction can be referable to the cooperative effects of the aligned bandgap structures, strong visible-light-harvesting capacity, and interfacial interactions via the internal electric field. This study provides insights into the protocols for rational design of S-scheme heterojunction catalysts for high-efficiency hydrogen evolution via sustainable photocatalytic water splitting.
RESUMO
The organized assembly of nanoparticles into complex macroarchitectures opens up a promising pathway to create functional materials. Here, we demonstrate a scalable strategy to fabricate macroarchitectures with high compressibility and elasticity from hollow particle-based carbon nanofibers. This strategy causes zeolitic imidazolate framework (ZIF-8)-polyacrylonitrile nanofibers to assemble into centimetre-sized aerogels (ZIF-8/NFAs) with expected shapes and tunable functions on a large scale. On further carbonization of ZIF-8/NFAs, ZIF-8 nanoparticles are transformed into a hollow structure to form the carbon nanofiber aerogels (CNFAs). The resulting CNFAs integrate the properties of zero-dimensional hollow structures, one-dimensional nanofibers, and three-dimensional carbon aerogels, and exhibit a low density of 7.32 mg cm-3, high mechanical strength (rapid recovery from 80% strain), outstanding adsorption capacity, and excellent photo-thermal conversion potential. These results provide a platform for the future development of macroarchitectured assemblies from nanometres to centimetres and facilitate the design of multifunctional materials.