Grain boundary plasticity initiated by excess volume.

Grain boundaries (GBs) serve not only as strong barriers to dislocation motion, but also as important carriers to accommodate plastic deformation in crystalline solids. During deformation, the inherent excess volume associated with loose atomic packing in GBs brings about a microscopic degree of freedom that can initiate GB plasticity, which is beyond the classic geometric description of GBs. However, identification of this atomistic process has long remained elusive due to its transient nature. Here, we use Au polycrystals to unveil a general and inherent route to initiating GB plasticity via a transient topological transition process triggered by the excess volume. This route underscores the general impact of a microscopic degree of freedom which is governed by a stress-triaxiality-based criterion. Our findings provide a missing perspective for developing a more comprehensive understanding of the role of GBs in plastic deformation.

Controllable Pseudoelasticity in Metallic Nanocrystals by Grain Boundary Engineering.

Materials with pseudoelasticity can recover from large strains exceeding their elastic limits during unloading, making them promising damage-tolerant building blocks for advanced nanodevices. Nevertheless, a practical approach to realize controllable pseudoelastic behavior at nanoscale remains challenging. Here, we proposed a grain boundary (GB) engineering approach to endow metallic nanocrystals with a controllable pseudoelasticity. Both in situ nanomechanical testing and atomistic simulations demonstrate that such controllable pseudoelasticity is governed by the extension and contraction of an inherent stacking fault array at the GB. By precisely tuning GB misorientation and inclination, our simulation results reveal that metallic nanocrystals can exhibit tailored pseudoelastic performance across a broad spectrum of GBs in different face-centered cubic metals. These findings enrich our understanding of the intrinsic pseudoelasticity of GBs and provide a GB engineering approach toward metallic materials with reversible deformability.

Improved biohydrogen production by co-fermentation of corn straw and excess sludge: Insights into biochemical process, microbial community and metabolic genes.

The global climate change mainly caused by fossil fuels combustion promotes that zero-carbon hydrogen production through eco-friendly methods has attracted attention in recent years. This investigation explored the biohydrogen production by co-fermentation of corn straw (CS) and excess sludge (ES), as well as comprehensively analyzed the internal mechanism. The results showed that the optimal ratio of CS to ES was 9:1 (TS) with the biohydrogen yield of 101.8 mL/g VS, which was higher than that from the mono-fermentation of CS by 1.0-fold. The pattern of volatile fatty acids (VFAs) indicated that the acetate was the most preponderant by-product in all fermentation systems during the biohydrogen production process, and its yield was improved by adding appropriate dosage of ES. In addition, the content of soluble COD (SCOD) was reduced as increasing ES, while concentration of NH4+-N showed an opposite tendency. Microbial community analysis revealed that the microbial composition in different samples showed a significant divergence. Trichococcus was the most dominant bacterial genus in the optimal ratio of 9:1 (CS/ES) fermentation system and its abundance was as high as 41.8%. The functional genes prediction found that the dominant metabolic genes and hydrogen-producing related genes had not been significantly increased in co-fermentation system (CS/ES = 9:1) compared to that in the mono-fermentation of CS, implying that enhancement of biohydrogen production by adding ES mainly relied on balancing nutrients and adjusting microbial community in this study. Further redundancy analysis (RDA) confirmed that biohydrogen yield was closely correlated with the enrichment of Trichococcus.

Clinical effects of maxillary protraction in different stages of dentition in skeletal class III children: A systematic review and meta-analysis.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the effectiveness of using maxillary protraction during different stages of the dentition by assessing changes in the jaws and inclination of incisors. MATERIALS AND METHODS: MEDLINE (PubMed), Embase, Cochrane, Web Of Science, China National Knowledge Infrastructure and Wanfang Databases were searched without time limitations up to 15 January 2022. Google Scholar was used to search grey literature. We included cohort studies that compared the effect of maxillary protraction by analysing primary outcomes and were grouped in age-related conditions. Mean differences and 95% confidence intervals were used for statistical analysis, followed by Grading of Recommendations Assessment, Development and Evaluation analysis. RESULTS: Six studies were finally included. The heterogeneity test showed P ≥ .1 and I2  ≤ 50%, and a fixed-effect model was applied. Patients in the early treatment group (ETG) were mainly in the early-mixed dentition stage, while patients in the late treatment group (LTG) were in the late-mixed and early-permanent dentition stage. Meta-analysis showed that there were no statistical differences (P > .05) between the ETG and LTG groups in terms of SNA (the angle composed by point Sella-Nasion-Subspinale), SNB (the angle composed by point Sella-Nasion-Supramentale), ANB (the angle composed by point Subspinale-Nasion-Supramentale), Wits, U1/SN (the angle composed by the axis of upper incisors and Sella-Nasion plane) and L1/MP (the angle composed by the axis of lower incisors and the mandibular plane). CONCLUSION: Our analysis showed that maxillary protraction applied in the late-mixed or early-permanent dentition stage did not cause different effects on the maxillary growth, the correction of the intermaxillary relationship, the inhibition of mandibular growth and dental tipping of skeletal class III patients when compared to that in the early-mixed dentition stage. Collectively, these data provide a theoretical basis for widening the applicable age period of maxillary protraction and choosing the best treatment opportunity for children patients after a comprehensive assessment.

Penta-Twin Destruction by Coordinated Twin Boundary Deformation.

Penta-twinned nanomaterials often exhibit unique mechanical properties. However, the intrinsic deformation behavior of penta-twins remains largely unclear, especially under the condition of high shear stress. In this study, we show that the deformation of penta-twins often subject to a structural destruction via dislocation-mediated coordinated twin boundary (TB) deformation, resulting in a reconstructed pentagon-shaped core. This reconstructed core region is mainly induced by the coordinated TB migration along different directions (for the nucleation and growth) and accelerated by the TB sliding (for the growth). The destructed penta-twin core can effectively accommodate the intrinsic disclination of the penta-twin, which further collapses beyond a critical size, as predicted by an energy-based criterion. These intrinsic deformation behaviors of penta-twins would enable the possibility of controlling the morphology of penta-twinned nanomaterials with unique properties.

A molecular dynamics simulation on the atomic mass sensor made of monolayer diamond.

The recently synthesized monolayer diamond-diamane has proved to possess excellent mechanical and electrical properties, and it holds great potential in the field of nano-mass sensors. Herein, a molecular dynamics (MD) simulation is employed to systematically investigate the vibration response of the diamane nanoribbon (DNR) for the mass inspection. The results show that under different attached masses, the natural frequency of DNR is about three times of that of the bilayer graphene nanoribbon (BGNR) with the same size. The edge flatness of the DNR can be maintained during the vibration process, while the edge of the BGNR will warp in the initial state. Increasing the pre-strain can significantly increase the natural frequency of the DNR, leading to a higher response sensitivity of the DNR. In addition, the DNR has a higher mass resolution than the BGNR, and can detect smaller attached mass. The position of the attached mass in the resonator has a significant effect on the detection response. When the attached mass is near the center of the resonator, the frequency shift reaches the maximum value, and then it rapidly decreases to zero when the attached mass is close to the edge of DNR. Finally, the attached mass has no obvious effect on the quality factor of the DNR, and its value is stable between 105and 106orders of magnitude. The theoretical results demonstrate the accuracy of the MD results. The MD simulations reveal that the DNR has important implications as a resonant material for nano-mass sensor in the future.

Embryonic exposure to fenbuconazole inhibits gametogenesis in adult zebrafish by targeting gonads not brain.

Fenbuconazole (FBZ) is widely used in agriculture. The current study was conducted to evaluate the influence of embryonic exposure to FBZ on reproduction in adult zebrafish. Embryos were exposed to 5, 50 and 500 ng/L FBZ for 72 h and then raised in clean water until adulthood. The result showed that the percentage of mature gametes was significantly reduced in adult zebrafish. The fertilization rate and survival rate of F1 embryos were decreased when the exposed fish were mated with untreated fish. The transcription of brain gnrh3, fshß and lhγ in adult fish was upregulated, while the levels of 17ß-estradiol and testosterone were not significantly changed in all treated groups, indicating that the reproduction-related genes in brain was not responsible for the reduced reproductive ability. The downregulated transcription of fshr, lhr, ar and esr2 in the gonads indicated the dysfunction of Sertoli and Leydig cells. Notably, downregulated transcription and upregulated methylation levels of genes related to germ cells were observed in treated F0 larvae and adult gonads. The elevated methylation levels of piwil1 and dnmt6 in the testes and vasa and dazl in the ovary were matched with the alterations in the expression of these genes, suggesting that germ cells are the main targets of FBZ. These results provide new mechanism underlying reproductive toxicity in fish caused by chemicals, and give potential retroactive biomarkers for monitoring reproductive toxic pollutants.

Double Ghost Convolution Attention Mechanism Network: A Framework for Hyperspectral Reconstruction of a Single RGB Image.

Current research on the reconstruction of hyperspectral images from RGB images using deep learning mainly focuses on learning complex mappings through deeper and wider convolutional neural networks (CNNs). However, the reconstruction accuracy of the hyperspectral image is not high and among other issues the model for generating these images takes up too much storage space. In this study, we propose the double ghost convolution attention mechanism network (DGCAMN) framework for the reconstruction of a single RGB image to improve the accuracy of spectral reconstruction and reduce the storage occupied by the model. The proposed DGCAMN consists of a double ghost residual attention block (DGRAB) module and optimal nonlocal block (ONB). DGRAB module uses GhostNet and PRELU activation functions to reduce the calculation parameters of the data and reduce the storage size of the generative model. At the same time, the proposed double output feature Convolutional Block Attention Module (DOFCBAM) is used to capture the texture details on the feature map to maximize the content of the reconstructed hyperspectral image. In the proposed ONB, the Argmax activation function is used to obtain the region with the most abundant feature information and maximize the most useful feature parameters. This helps to improve the accuracy of spectral reconstruction. These contributions enable the DGCAMN framework to achieve the highest spectral accuracy with minimal storage consumption. The proposed method has been applied to the NTIRE 2020 dataset. Experimental results show that the proposed DGCAMN method outperforms the spectral accuracy reconstructed by advanced deep learning methods and greatly reduces storage consumption.

Low torque is a risk factor for non-carious cervical lesions (NCCLs) in maxillary premolars.

PURPOSE: To determine the prevalence of non-carious cervical lesions (NCCLs) in maxillary premolars of different torques and simulated cervical stress profiles of the premolars under coincident loadings using finite element analysis (FEA). METHODS: The CBCT scans of 616 maxillary premolars from 154 subjects were retrospectively evaluated. The premolars were ascribed into low torque group (LTG) <-10.9°, medium torque group (MTG) -10.9° to -3.9°, and high torque group (HTG) >-3.9°, when the torque was referring to the occlusion plane. The prevalence of NCCLs in each group was evaluated. Then finite element models of a maxillary first premolar, its adjacent teeth and alveolar bone were established. The models were prepared with ANSYS software generating the premolars presenting different torques. The mastication scenario for the premolars in maximum intercuspation position was simulated. RESULTS: The prevalence of NCCLs was 15.7% in LTG, 7.9% in MTG and 5.5% in HTG. The prevalence of LTG was significantly higher than that of MTG (P< 0.05) and HTG (P< 0.01). As for FEA, the stresses at the buccal necks of the premolars basically increased with decrease of the torque. The tensile stress peaks were in the cemento-enamel junction in most premolars of the LTG, while in the middle of the crowns in premolars of MTG and HTG. CLINICAL SIGNIFICANCE: Low torque with excessive lingual inclination is a risk factor for NCCLs of maxillary premolars, and excessive tensile stress concentration in buccal necks during mastication may be responsible for that.

Zoonotic Vectorborne Pathogens and Ectoparasites of Dogs and Cats in Eastern and Southeast Asia.

To provide data that can be used to inform treatment and prevention strategies for zoonotic pathogens in animal and human populations, we assessed the occurrence of zoonotic pathogens and their vectors on 2,381 client-owned dogs and cats living in metropolitan areas of 8 countries in eastern and Southeast Asia during 2017-2018. Overall exposure to ectoparasites was 42.4% in dogs and 31.3% in cats. Our data cover a wide geographic distribution of several pathogens, including Leishmania infantum and zoonotic species of filariae, and of animals infested with arthropods known to be vectors of zoonotic pathogens. Because dogs and cats share a common environment with humans, they are likely to be key reservoirs of pathogens that infect persons in the same environment. These results will help epidemiologists and policy makers provide tailored recommendations for future surveillance and prevention strategies.

Dual-Additive Assisted Chemical Vapor Deposition for the Growth of Mn-Doped 2D MoS2 with Tunable Electronic Properties.

Doping of bulk silicon and III-V materials has paved the foundation of the current semiconductor industry. Controlled doping of 2D semiconductors, which can also be used to tune their bandgap and type of carrier thus changing their electronic, optical, and catalytic properties, remains challenging. Here the substitutional doping of nonlike element dopant (Mn) at the Mo sites of 2D MoS2 is reported to tune its electronic and catalytic properties. The key for the successful incorporation of Mn into the MoS2 lattice stems from the development of a new growth technology called dual-additive chemical vapor deposition. First, the addition of a MnO2 additive to the MoS2 growth process reshapes the morphology and increases lateral size of Mn-doped MoS2 . Second, a NaCl additive helps in promoting the substitutional doping and increases the concentration of Mn dopant to 1.7 at%. Because Mn has more valance electrons than Mo, its doping into MoS2 shifts the Fermi level toward the conduction band, resulting in improved electrical contact in field effect transistors. Mn doping also increases the hydrogen evolution activity of MoS2 electrocatalysts. This work provides a growth method for doping nonlike elements into 2D MoS2 and potentially many other 2D materials to modify their properties.

Growth of environmentally stable transition metal selenide films.

Two-dimensional transition metal selenides (TMSs) possess fascinating physical properties. However, many as-prepared TMSs are environmentally unstable and limited in sample size, which greatly hinder their wide applications in high-performance electrical devices. Here we develop a general two-step vapour deposition method and successfully grow different TMS films with controllable thickness, wafer size and high quality. The superconductivity of the grown NbSe2 film is comparable with sheets exfoliated from bulk materials, and can maintain stability after a variety of harsh treatments, which are ascribed to the absence of oxygen during the whole growth process. Such environmental stability can greatly simplify the fabrication procedure for device applications, and should be of both fundamental and technological significance in developing TMS-based devices.

Formation of monatomic metallic glasses through ultrafast liquid quenching.

It has long been conjectured that any metallic liquid can be vitrified into a glassy state provided that the cooling rate is sufficiently high. Experimentally, however, vitrification of single-element metallic liquids is notoriously difficult. True laboratory demonstration of the formation of monatomic metallic glass has been lacking. Here we report an experimental approach to the vitrification of monatomic metallic liquids by achieving an unprecedentedly high liquid-quenching rate of 10(14) K s(-1). Under such a high cooling rate, melts of pure refractory body-centred cubic (bcc) metals, such as liquid tantalum and vanadium, are successfully vitrified to form metallic glasses suitable for property interrogations. Combining in situ transmission electron microscopy observation and atoms-to-continuum modelling, we investigated the formation condition and thermal stability of the monatomic metallic glasses as obtained. The availability of monatomic metallic glasses, being the simplest glass formers, offers unique possibilities for studying the structure and property relationships of glasses. Our technique also shows great control over the reversible vitrification-crystallization processes, suggesting its potential in micro-electromechanical applications. The ultrahigh cooling rate, approaching the highest liquid-quenching rate attainable in the experiment, makes it possible to explore the fast kinetics and structural behaviour of supercooled metallic liquids within the nanosecond to picosecond regimes.

Tuning the Outward to Inward Swelling in Lithiated Silicon Nanotubes via Surface Oxide Coating.

Electrochemically induced mechanical degradation hinders the application of Si anodes in advanced lithium-ion batteries. Hollow structures and surface coatings have been often used to mitigate the degradation of Si-based anodes. However, the structural change and degradation mechanism during lithiation/delithiation of hollow Si structures with coatings remain unclear. Here, we combine in situ TEM experiment and chemomechanical modeling to study the electrochemically induced swelling of amorphous-Si (a-Si) nanotubes with different thicknesses of surface SiOx layers. Surprisingly, we find that no inward expansion occurs at the inner surface during lithiation of a-Si nanotubes with native oxides. In contrast, inward expansion can be induced by increasing the thickness of SiOx on the outer surface, thus reducing the overall outward swelling of the lithiated nanotube. Moreover, both the sandwich lithiation mechanism and the two-stage lithiation process in a-Si nanotubes remain unchanged with the increasing thickness of surface coatings. Our chemomechanical modeling reveals the mechanical confinement effects in lithiated a-Si nanotubes with and without SiOx coatings. This work not only provides insights into the degradation of nanotube anodes with surface coatings but also sheds light onto the optimal design of hollow anodes for high-performance lithium-ion batteries.

Size-Dependent Brittle-to-Ductile Transition in Silica Glass Nanofibers.

Silica (SiO2) glass, an essential material in human civilization, possesses excellent formability near its glass-transition temperature (Tg > 1100 °C). However, bulk SiO2 glass is very brittle at room temperature. Here we show a surprising brittle-to-ductile transition of SiO2 glass nanofibers at room temperature as its diameter reduces below 18 nm, accompanied by ultrahigh fracture strength. Large tensile plastic elongation up to 18% can be achieved at low strain rate. The unexpected ductility is due to a free surface affected zone in the nanofibers, with enhanced ionic mobility compared to the bulk that improves ductility by producing more bond-switching events per irreversible bond loss under tensile stress. Our discovery is fundamentally important for understanding the damage tolerance of small-scale amorphous structures.

In situ atomic-scale observation of twinning-dominated deformation in nanoscale body-centred cubic tungsten.

Twinning is a fundamental deformation mode that competes against dislocation slip in crystalline solids. In metallic nanostructures, plastic deformation requires higher stresses than those needed in their bulk counterparts, resulting in the 'smaller is stronger' phenomenon. Such high stresses are thought to favour twinning over dislocation slip. Deformation twinning has been well documented in face-centred cubic (FCC) nanoscale crystals. However, it remains unexplored in body-centred cubic (BCC) nanoscale crystals. Here, by using in situ high-resolution transmission electron microscopy and atomistic simulations, we show that twinning is the dominant deformation mechanism in nanoscale crystals of BCC tungsten. Such deformation twinning is pseudoelastic, manifested through reversible detwinning during unloading. We find that the competition between twinning and dislocation slip can be mediated by loading orientation, which is attributed to the competing nucleation mechanism of defects in nanoscale BCC crystals. Our work provides direct observations of deformation twinning as well as new insights into the deformation mechanism in BCC nanostructures.

Strong Hall-Petch Type Behavior in the Elastic Strain Limit of Nanotwinned Gold Nanowires.

Pushing the limits of elastic deformation in nanowires subjected to stress is important for the design and performance of nanoscale devices from elastic strain engineering. Particularly, introducing nanoscale twins has proved effective in rising the tensile strength of metals. However, attaining ideal elastic strains in nanotwinned materials remains challenging, because nonuniform twin sizes locally affect the yielding behavior. Here, using in situ high-resolution transmission electron microscopy tensile testing of nanotwinned [111]-oriented gold nanowires, we report direct lattice-strain measurements that demonstrate a strong Hall-Petch type relationship in the elastic strain limit up to 5.3%, or near the ideal theoretical limit, as the twin size is decreased below 3 nm. It is found that the largest twin in nanowires with irregular twin sizes controls the slip nucleation and yielding processes in pure tension, which is in agreement with earlier atomistic simulations. Continuous hardening behavior without loss of strength or softening is observed in nanotwinned single-crystalline gold nanowires, which differs from the behaviors of bulk nanocrystalline and nanotwinned-nanocrystalline metals. These findings are of practical value for the use of nanotwinned metallic and semiconductor nanowires in strain-engineered functional microdevices.

In situ transmission electron microscopy study of electrochemical sodiation and potassiation of carbon nanofibers.

Carbonaceous materials have great potential for applications as anodes of alkali-metal ion batteries, such as Na-ion batteries and K-ion batteries (NIB and KIBs). We conduct an in situ study of the electrochemically driven sodiation and potassiation of individual carbon nanofibers (CNFs) by transmission electron microscopy (TEM). The CNFs are hollow and consist of a bilayer wall with an outer layer of disordered-carbon (d-C) enclosing an inner layer of crystalline-carbon (c-C). The d-C exhibits about three times volume expansion of the c-C after full sodiation or potassiation, thus suggesting a much higher storage capacity of Na or K ions in d-C than c-C. For the bilayer CNF-based electrode, a steady sodium capacity of 245 mAh/g is measured with a Coulombic efficiency approaching 98% after a few initial cycles. The in situ TEM experiments also reveal the mechanical degradation of CNFs through formation of longitudinal cracks near the c-C/d-C interface during sodiation and potassiation. Geometrical changes of the tube are explained by a chemomechanical model using the anisotropic sodiation/potassiation strains in c-C and d-C. Our results provide mechanistic insights into the electrochemical reaction, microstructure evolution and mechanical degradation of carbon-based anodes during sodiation and potassiation, shedding light onto the development of carbon-based electrodes for NIBs and KIBs.

Current developments and future perspectives of nanotechnology in orthopedic implants: an updated review.

Orthopedic implants are the most commonly used fracture fixation devices for facilitating the growth and development of incipient bone and treating bone diseases and defects. However, most orthopedic implants suffer from various drawbacks and complications, including bacterial adhesion, poor cell proliferation, and limited resistance to corrosion. One of the major drawbacks of currently available orthopedic implants is their inadequate osseointegration at the tissue-implant interface. This leads to loosening as a result of immunological rejection, wear debris formation, low mechanical fixation, and implant-related infections. Nanotechnology holds the promise to offer a wide range of innovative technologies for use in translational orthopedic research. Nanomaterials have great potential for use in orthopedic applications due to their exceptional tribological qualities, high resistance to wear and tear, ability to maintain drug release, capacity for osseointegration, and capability to regenerate tissue. Furthermore, nanostructured materials possess the ability to mimic the features and hierarchical structure of native bones. They facilitate cell proliferation, decrease the rate of infection, and prevent biofilm formation, among other diverse functions. The emergence of nanostructured polymers, metals, ceramics, and carbon materials has enabled novel approaches in orthopaedic research. This review provides a concise overview of nanotechnology-based biomaterials utilized in orthopedics, encompassing metallic and nonmetallic nanomaterials. A further overview is provided regarding the biomedical applications of nanotechnology-based biomaterials, including their application in orthopedics for drug delivery systems and bone tissue engineering to facilitate scaffold preparation, surface modification of implantable materials to improve their osteointegration properties, and treatment of musculoskeletal infections. Hence, this review article offers a contemporary overview of the current applications of nanotechnology in orthopedic implants and bone tissue engineering, as well as its prospective future applications.

Current advancements in therapeutic approaches in orthopedic surgery: a review of recent trends.

Recent advancements in orthopedic surgery have greatly improved the management of musculoskeletal disorders and injuries. This review discusses the latest therapeutic approaches that have emerged in orthopedics. We examine the use of regenerative medicine, including stem cell therapy and platelet-rich plasma (PRP) injections, to accelerate healing and promote tissue regeneration. Additionally, we explore the application of robotic-assisted surgery, which provides greater precision and accuracy during surgical procedures. We also delve into the emergence of personalized medicine, which tailors treatments to individual patients based on their unique genetic and environmental factors. Furthermore, we discuss telemedicine and remote patient monitoring as methods for improving patient outcomes and reducing healthcare costs. Finally, we examine the growing interest in using artificial intelligence and machine learning in orthopedics, particularly in diagnosis and treatment planning. Overall, these advancements in therapeutic approaches have significantly improved patient outcomes, reduced recovery times, and enhanced the overall quality of care in orthopedic surgery.